Municipal Corporation Tender

5.18:Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

7.5.1:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

7.6.1:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm

14.16.1.a:Supplying and laying of following size DWC HDPE pipe lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal)

Approved Rates

122.1.2:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*6 sqmm

OD7364/2024-2025:Providing and laying in position M25 grade reinforced cement concrete foundation of size 450 mm (L) ×450 mm wide and 1000 mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia- 960 mm long(approx)-8 nos. and reinforcement of cold twisted bars of 8 mm dia1400 mm (approx) -6 nos.(with 150 mm spacing) as required with supplying and positioning of 4 nos. foundation bolts 16 mm dia,600 mm long, J type i/c 2 nos. template anchor plates of size 225mm×225mm×3mm and providing DWC HDPE for cable entry and exit as required for 3 m and 5 mtr pole.

OD7365/2024-2025:Fabrication, supply and erection of 5 metre height MS decorative street light pole with attached name plate of suitable size including engraved name of area representative with desired colour. The pole is straight line with zigzag arm with fixed mild steel bottom plate of size 300x300x10mm thickness & also inbuilt service window of 300 mm x 100 mm at 800 mm above the base plate on existing cement concrete pedestal as required with a heavy duty 4 way connector including earth connector & 6 A SPMCB. Pole& brackets dimension is 145x82x3mm thick. Logo and name of the manufacturer shall be embossed on the pole. The pole should be primer coated and PU painted. As per diagrams attached. Single arm bracket of size 1000 mm long with high lumen LED module made out of pressure diecast aluminium with polycarbonate diffuser attached (1x60 W), I P rating IP 66 a) Total System Wattage=60W +/- 5% b) Luminous efficacy = 100 Lm/w ( c ) Power factor = .95 with minimum 03 years warranty on LED lights and accessories etc. (LED light and Driver - Superior Make)