Municipal Corporation Tender

P&F/Replacement of M.S Black pipe (9.5 mm thickness) confirming to Is: 3589 with required nut bolts & packing sheet etc complete as required of 250 mm dia, 9.5 mm thick

Replacement of swing type Non Return valve of CI body with Door, bronze to Rubber rings confirming to IS 5312 (Part 1 & 2), PN 1.6 complete as required (i) NRV 250 mm

Providing and Fixing of M.S Flange with required nut bolts & packing sheet etc complete as required of dia (i) 250 mm (20 mm thickness)

Providing and Fixing of M.S Bend with required nut bolts & packing sheet etc complete as required of dia (i) 250 mm- (8 mm thick), length 0.5m

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :250 mm di

Supply installation testing and commissioning of Electrical Horizontal centrifugal pump set with non clog/mf impeller to handle storm/mixed/ sewage water with CI Impeller, EN8 Shaft, SS Sleeve, Min. discharge of 125m3/hr at head range 15 mtr,coupled with 3-phase Induction motor 15HP,TEFC 440 V1450 rpm with coupled guard,base frame

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :150mm dia

Supply of XLPE insulated,PVC sheathed Al.conductor armoured Cable 1.1 kv Conforming to IS 7098/1988 of following Sizes.4x70sq. mm

Supply of XLPE insulated,PVC sheathed Al.conductor armoured Cable 1.1 kv Conforming to IS 7098/1988 of following Sizes.3x35sq. mm

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required 150 mm width X 50 mm depth X 1.6 mm thickness

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mmMS flat clamp)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required upto 35sqmm

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

S/I/T/C of LED Tube type luminaire 20 Watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient LEDs with the following:(a) Total system wattage 20 watt +/- 5%(b )Luminous efficacy lumens/watt >=95 (c)Power Factor >=0.95

SITC Emergency light powerful light source in dark. Basically twin beam high intensity glow LED Light automatically glow in care of power failure. It requirement does not need glow both lamp here is separate switch provided for each lamp & EXIT Sign, These lights have the inbuilt feature of low battery protection at 9 volts & overcharging at 13 volts. Most suitable for hospitals etc and available in (2X10 Watt) 2 models(A) Twin beam high intensity glow LED Light. SPECIFICATIONS SLA rechargeable battery backup 1 hour backup/10 hours recharging period. For power utility protection bed switch provided. This switch is used in manned & unmanned timings power failure. FUNCTIONS AND CONTROL FUSE: Used for overloading and protection against short circuit. Use only appropriate rating (6AMP) FUSE. FUSE INDICATION:If this indication signing on it mean fuse is blown. LOW BATTERY: Defined as name it is glow in low battery condtion. LIGHT-1: Switch dedicated for light one on/off as per requirement of user. LIGHT2: This is same as switch one. It is notable point that single light increase the backup time. EXIT: Is on/off switch for exit signor display sign. BED SWITCH: This switch provide for protesting battery from futile use. MAINS: MAIN POWER IS INSERTED IN PRODUCT IS INDICATED BY THIS LED.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C