Municipal Corporation Tender

S/I/T/C of fully automatic Auto Tranformer starter will be made out/ febricated with 2 mm thick MS sheet steel, dust & vermin proof , darn and dip proof, front operated, selfsupported free standing type constructions and will be duly spray painted sythentic Enamed of light grey shade 631 og IS:5 andaccomodate all switch gear item required to meet the technicalrequirement of ATS 75 HP & Adequate rating Oil immerset AUTO Transformer having copper winding, class 'E' insulation with taping 50%, 65% % 80% (01 No.) Adquate rating power contactor, Overload relay, single phase preventer relay with under voltage & cover voltage or as suitabe (01 No.) Flush mounting type ammeter 96 sqmm with selector switch (01 No.) including lamp for connection (01No) volmeter 96 sqmm with selector switch (01 No.), indicating lamp foron, off, TRIP(03 Nos), indicating lamp for RYB (03 Nos.) without transformer's all ass follows: (1) Switch fuse unit 160A TPN with handle FN 160 A-1No. (2) HRC fuse 160A-3 Nos. (3) Star contactor coll volltage 240AC with 2 No. + 2NC AUX. Ciontacts Block MNX 50 1 No. (4) TAPContactor coll Votage 240AC with 2 No No. +NC AUX Contactor Block MNX 50. 1No. (5) line contactor coil volltage 240 AC with 2 No. + 2NC AUX Contacts cblock MNX 50 1 NO. (6) over loadrelay range -A CT operated 66-110A MNS-01 No. (7) current Transformer 15VA CL 1 for metering 150/5A 3 No. (8) puch button start/Stop element 22.5 mm dia-2 Nos(9) indicatinglamp 230v AC Red LED Type 3 No (10) MCB 6A1P MCB 10KA-1 No. (11) on Delay timer 0 30 sec coil voltage 240 v, AC 2AOCDTS-3 Nos(12) Ammeter, 0-100/5a,(100-600A) Sappress scale6- Time, 96 Sq mm with Ameter Selector switch 0-100/5A-1 No. (13) voltmeter0-500 v,96 sqmm size with voltage selector S96-1 No. (14) single phase preventer relay with under voltage S2VMR2 1 No.

Supply of Electrical Horizontal Centrifugal pump set with Non clog/mf impleller to handle storm/mixed/sewage water with CI Impeller, EN8 shaft, SS Sleeve, Min, Discharge 800 m3/hr at head rang 15 mtr. (suction 250 mm & delivery size 250 mm duly coupled with 50 HP Energy Efficient BEE Model Electric motor mounted on a common base frame coupled and coupling guard etc. complete as required.

Supply installation testing and commissioning of Electrical Horizontal centrifugal pump set with non-clog / mf impeller to handle storm/mixed/sewage water with having min. discharge of 800 M³/ Hour at head min 7 mtr, RPM 750 having suction and delivery size 350 mm or 300 mm dia, mounted on a common base frame coupled with min 40 HP or suitable rating(IE-2) three phase , TEFC AC , 415 volts , 50 HZ supply electrical motor energy efficient complete as required.Mounted on a common base frame as Casing CI , Impeller CI,Shaft & sleeve (SS) 40 C 8 complete with coupling guard and foundation bolts etc. as reqd.

SITCof pump- Non Clog Sewage Solid Handling-Suc/Del size 1500 mm x 150 mm head 15 mtr & discharge 400 m3/hr, Body-CI, Impeller-SS, Shaft-EN-B, Sleeve-SS with coupling, base frame, fuel tank & leads coupled with 38 BHP diesel engine, 1500 RPM, Self start, water cooled with radiator complete with 12 V battery as required

Providing and fixing MS Black Pipe confirmimg to IS: 3589 Gr. 330 with packing sheet as required of following dia: 150 mm

P&F/Replacement of MS Black pipe (9.5 mm thickness) confirming to IS:3589 with required nut bolts & packing sheet etc complete as required of following dia. (a) Dia 400 mm ( Min. thickness)

Providing , Fixing , testing & commissioning of non rising spindle sluice valve of CI body with wedge bronze ring confirming to ISI 6603 marked complete PN 1.6 complete as required. (a) SV 150 mm

Providing , Fixing , testing & commissioning of non rising spindle sluice valve of CI body with wedge bronze ring confirming to ISI 6603 marked complete PN 1.6 complete as required. (a) SV 150 mm

Providing , Fixing , testing & commissioning of non rising spindle sluice valve of CI body with wedge bronze ring confirming to ISI 6603 marked complete PN 1.6 complete as required. (a) SV 200 mm

Replacement of swing type Non Return Valve of CI Body with Door , Bornze to rubber rings confirming to IS 5312 (Part1 & 2), PN 1.6 complete as required (a) NRV 200mm

Replacement of swing type Non Return Valve of CI Body with Door , Bornze to rubber rings confirming to IS 5312 (Part1 & 2), PN 1.6 complete as required (a) NRV 150 mm

Providing & fixing of MS Bend with required nut bolts & packing sheet etc complete as required of following dia: Dia 150 mm ( Min. thickness)

Providing & fixing of MS Bend with required nut bolts & packing sheet etc completevas required of following dia: (b) Dia 400 mm ( 10 thick length 0.7 m)

Providing & fixing of MS Bend with required nut bolts & packing sheet etc complete as required of following dia: (a) Dia 200 mm ( 8 mm thick, length 0.5 m)

Providing & fixing of MS Blind Flange with required nut bolts & packing sheet etc complete as required of following dia: (a) Dia 400 mm ( 25 mm thickness)

Providing & fixing of MS Flange with required nut bolts & packing sheet etc complete as required of following dia: Dia 400 mm ( 25 mm thickness)

Providing & fixing of MS Flange with required nut bolts & packing sheet etc complete as required of following dia: (b) Dia 200 mm (20 mm thickness)

Providing & fixing of MS Flange with required nut bolts & packing sheet etc complete as required of following dia:(a) Dia 150 mm ( 15 mm thickness)

Fabrication,Supplying,Installation,testing,Commissioning of 12 mtr high mast System vwith its accessories ,Mast shaft shall be in one section , hot dip galvanized 4mm vthick(Single dip ) inside & out sides amp;suitable for wind velocity as per IS 875 part3 .There shall be in longitudinal seam weld per section and No circumferential weld. It should also included accessories For High Mast head frame ,2 point suspension system, 5*2.5 sqmm Cu conductor with steel wire rope 5mm dia. (7/19construction) single drum winch ,galvanized lantern carriage arrangement suitable for 4/6 Nos. Flood Light luminaries symmetrically And its control gears boxes and lighting finial ,the mast shall have integral type manual tool mounted at the base compartment of its raising and lowering operation with foundation bolts and Anchor plate and control panel housing suitable RCC (1:2:4) shallow foundation of size 1m(L) x 1m wide and 2m deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia -2100mm long (approx.) - 16 nos.and reinforcement of cold twisted bar of 8 mm dia - 3700 mm (approx.) - 13 nos. (with 150 mm spacing) as required with positioning of foundation bolts and providing DWC HDPE pipe for cable entry & exit as required for the high mast considering The safe soil bearing capacity at site as 10T/sqm at 2mts. Depth with all material i/c 4Nos S.P CB,63Amp.DPIsolator etc as reqd. Logo/Name of manufacturer shall be embossed on the pole. Galvanization as per relevant IS.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required Above 95 sq. mm and upto 185 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.600 mm width X 50 mm depth X 2.0 mm thickness

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 Amp, 16 KA, TPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.315 Amp., 35 KA,TPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.200 Amp, 36 KA, FPMCCB

Supplying and laying of following size DWC HDPE pipe lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal)

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-3C*50 sqmm

Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-3.5C*70 sqmm

Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-3C*95 sqmm

Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*10 sqmm

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (85 Kg of Iron Bar required for 1 Cu.m.).

Supply of 140 watt LED Street Light/Flood Light Luminaire fitted with lens made of pressure die cast aluminium housing and toughened glass cover complete with the following specifications as per relevant IS (a) Total System Wattage :140 Watt ± 5% (b) Luminaire Efficacy -130Lumens/watt minimum) (c) Power factor 0.95 (d) Protection Class IP66 ( e ) LED Packageshall be Ceramic Base. (f) Multi Chip. Array, Multi Die, Mid Power, Integrated Arrays and COB type Chip are not permitted ( g ) Operating Current of LED 70% of rated maximum forward current, limited to a minimum of 350 mA and maximum of 1000 mA. (h) Wattage of LED Package : Onewatt to Five watt maximum (i) CRI 70 (i) THD 10% for complete fixture (k) Operating Voltage - 110-320 V, 50Hz +/- 3% (l) The driver must have thermal Protection against75 deg C ambient temperature with internal SPD of minimum 6 KV. Separate Compartment for Driver (m)Life ofStreet Light: Minimum 50,000 hrs

Installation and Commissioning ofStreetLight/Flood Light etc as required