Municipal Corporation Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Municipal Corporation Tender
Eprocure
Opening Date2 Sep 2024
Closing Date19 Sep 2024
Tender Amount₹ 5,00,00,000
Costs
EMD
₹ 10,00,000Document Cost
₹ 2,360Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MCD_206802_1Bid Award Id
ViewTender No
DDH(HQ)II/ MCD/2024-25/D-904/NIT No.6Tender Authority
Municipal Corporation ViewPurchaser Address
-Website
http://etenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
MULTIPURPOSE PLAY SYSTEM (ROTO HEX DECK WITH CANOPY, OCTAGONAL DECK) Hex Deck With Canopy : 1 No. Octagonal Deck : 1 No. Double Wave Slide: 1 No. Spiral Slide: 1 No. Rock Climber: 1 No. Stair Case: 1 No. S Bridge Ladder: 1 No. Plain Bridge: 1 No. Slide Entry : 1 No. Curve Slide: 1 No. Bridge Ladder: 1 No. Two Seat Swing: 1 No. Butterfly: 2 Nos. Sun Flower : 2 Nos. Roto Railing Big &Small. Main Frame Of MPPS Is Of Dia 80mm NB GI Pipe. Double Wave Slide Support Frame Is Made From Dia 25mm NB GI Pipe. Spiral Slide Support Pipe Is Of Dia32 NB GI Pipe. Spiral Slide Centre Pipe Is Of Dia 80 NB GI Pipe. S Bridge Ladder Frame Is Made Of Dia 32mm NB GI Pipe. Bridge Ladder Frame Is Made Of Dia 32mm NB GI Pipe. The Main Frame Of Two Seat Swing Is Made Of Dia 40mm NB GI Pipe. The Horizontal Diameter 50mm NB G.I. Pipe. M.S. Nut Bolts With Zinc Plating Are Used For Assembly. Powder Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
MULTIPURPOSE PLAY SYSTEM(ROTO) NC-21701 Size: 5.6 X 5.6 X 2.8m, Safe Play Area: 8.6 X 8.6m, Capacity: 12. Rope Of Marine High-Strength Cable Having Diameter 16mm And 6 Strands Of Steel Wire In The Middle. Galvanised Pipes Having Thickness Of 2.5mm And 60mm Dia Pipes To Be Used For The Main Frame Of The Structure. Attachments Steel Ballshaving Diameter Of 250mm Made Of Die-Cast Alluminium Rope Buckle:Die-Cast Aluminium Fastener:304 Stainless Steel. The Components Are As Per The Fixtures Provided Are Rope Climber-No(S). 2 Of Dimension 2.4m Height, Rope Climber-2 No(S). 2 Of Dimension 2.4m Height, Swing Seat No(S). 4 Of Dimension 781x152x10, Net Climber No(S). 1 Of Dimension Dia 5613 X 2427. Powder Coating With Pure Polymer Powder WithTank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
MULTIPURPOSE PLAY SYSTEM(ROTO) LEO. Size: 26ftx 25ft, Safe Play Area: 32ft X 31ft. The Main Frame Is Made From 100NB And 100 NB GI Pipes, To Form A Circular Shape. The Main Frame Is Supported On 100 NB GI Pipe (08 Nos). Height Of The Frame Will Be 1.5 Mtr. Spring Scrambler Centre Support Made Out Of 40mm GI Pipes, The Spring Fabricated Out Of 25mm GI Pipe, Spring Diameter Shall Be 600mm. . The Net Climber Is Made From 80mm Dia. These Ropes Are Supported With 100 NB GI Pipe. Step Ladder Is Made Up Of 50 NB & 25 NB GI Pipe. Spider Scrambler Centre Support Made Out Of 50 Mm GI Pipes, The U Band Step Fabricated Out Of 20mm GI Pipe. 16mm Polyester Rope Galvanized Steel Wire Inside. Rope End Fastener Is Of High Strength Aluminium And Fixed With T Connector Or Bar Clamp Made Of Nylon 6/ Metal. Rope Cross-Over Connector Made With Nylon 6/ Metal. Rope End Connector Made From Nylon 6/ Metal. All GI Structure Is Powder Coated / PU Painted. Powder Coating Thickness 70-75 Micron With PP Powder Of Reputed Brand Only. To Be Fitted Using S.S. (Non Rusting) Nut Bolt 12 Mm &Nylon Lock Nut With Nylon Cap Made With 66 Nylon Material. Powder Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
MULTIPURPOSE PLAY SYSTEM(ROTO) TADEPOL. Size: 30ft X 21ft, Safe Play Area: 36ft X 26ft. The Main Frame Is Made From 100NB And 100 NB GI Pipes, To Form A Circular Shape. Height Of The Frame Will Be 1.5 Mtr. The Main Frame Is Supported On 100 NB GI Pipe (08 Nos). Roto Wave Slide Is Made Up Of Specially Formulated Food Grade LLDPE Mixed With UV Stabilizer & Antioxidants To Protect It From UV Rays & Its Effects & To Prevent Oxidization Respectively. The Chute Has Its End Such As It Causes Safe Landing Of The Child. The Landing Portion Should Be In Horizontal With Respect To The Ground. There Should Be Support Provided Made Up Of 25 NB GI Pipe. This Is A Double Wall Slide. Spring Scrambler Centre Support Made Out Of 32mm GI Pipes, The Spring Fabricated Out Of 25mm GI Pipe, Spring Diameter Shall Be 600mm. Fireman Pole Made Of 40mm GI Pipe & 50 Mm X 10 Mm G.I. Patti. Spider Scrambler Centre Support Made Out Of 50 Mm GI Pipes, The U Band Step Fabricated Out Of 20mm GI Pipe. Step Ladder Is Made Up Of 50 NB & 25 NB GI Pipe. The Net Climber Is Made From 16mm Dia. These Ropes Are Supported With 100 NB GI Pipe. Double Rail Climber Is Made Up Of 32 NB GI Pipe. 16mm Polyester Rope Galvanized Steel Wire Inside. Rope End Fastener Is Of High Strength Aluminium And Fixed With T Connector Or Bar Clamp Made Of Nylon 6/ Metal. Rope Cross-Over Connector Made With Nylon 6/ Metal. Rope End Connector Made From Nylon 6/ Metal. All GI Structure Is Powder Coated / PU Painted. Powder Coating Thickness 70-75 Micron With PP Powder Of Reputed Brand Only. To Be Fitted Using S.S. (Non Rusting) Nut Bolt 12 Mm &Nylon Lock Nut With Nylon Cap Made With 66 Nylon Material. Powder Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
MULTIPURPOSE PLAY SYSTEM(ROTO) IGLOO. Size: 12ft X 12ft, Safe Play Area: 16ft X 16ft. The Arch Shaped Side Frame Of Igloo Are Made Up Of 100NB GI Pipe & Horizontal Circle Is Made Up Of 80 NB GI Pipe. 16mm Polyester Rope Galvanized Steel Wire Inside. Height Of The Frame Will Be 1.8 Mtr. Swing Is Fitted With Special Design Clamps Assembly. Plastosol Coated Short Link Chain Of 6 Mm Dia. Seat Used Is Rubber With Non Skid Surface With Nylon Lining Pattern. Triangular Hook Are Moulded In Belt In Such A Way That It Would Not Project From The Top Surface Of The Belt Seats. Rope End Fastener Is Of High Strength Aluminium And Fixed With T Connector Or Bar Clamp Made Of Nylon 6/ Metal. Rope Cross-Over Connector Made With Nylon 6/ Metal. Rope End Connector Made From Nylon 6/ Metal. All GI Structure Is Powder Coated / PU Painted. Powder Coating Thickness 70-75 Micron With PP Powder Of Reputed Brand Only. To Be Fitted Using S.S. (Non Rusting) Nut Bolt 12 Mm &Nylon Lock Nut With Nylon Cap Made With 66 Nylon Material. Powder Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
MULTIPURPOSE PLAY SYSTEM(ROTO) WHIRLPOLE. Size: 21.75ft X 19.5ft, Safe Play Area: 27.75ft X 25.4ft. The Main Frame Is Made From 100NB And 100 NB GI Pipes, To Form A Circular Shape. The Main Frame Is Supported On 100 NB GI Pipe (08 Nos). Height Of The Frame Will Be 1.5 Mtr. Step Ladder Is Made Up Of 50 NB & 25 NB GI Pipe. Roto Wave Slide Is Made Up Of Specially Formulated Food Grade LLDPE Mixed With UV Stabilizer & Antioxidants To Protect It From UV Rays & Its Effects & To Prevent Oxidization Respectively. The Chute Has Its End Such As It Causes Safe Landing Of The Child. The Landing Portion Should Be In Horizontal With Respect To The Ground. There Should Be Support Provided Made Up Of 25 NB GI Pipe. This Is A Double Wall Slide. Spring Scrambler Centre Support Made Out Of 32mm GI Pipes, The Spring Fabricated Out Of 25mm GI Pipe, Spring Diameter Shall Be 600mm. The Chain Net Scrambler Made For 8mm Tested Chain Link & 20mm GI Pipes. The Net Climber Is Made From 16mm Dia. These Ropes Are Supported With 80 NB GI Pipe. 16mm Polyester Rope Galvanized Steel Wire Inside. Rope End Fastener Is Of High Strength Aluminium And Fixed With T Connector Or Bar Clamp Made Of Nylon 6/ Metal. Rope Cross-Over Connector Made With Nylon 6/ Metal. Rope End Connector Made From Nylon 6/ Metal. All GI Structure Is Powder Coated / PU Painted. Powder Coating Thickness 70-75 Micron With PP Powder Of Reputed Brand Only. To Be Fitted Using S.S. (Non Rusting) Nut Bolt 12 Mm &Nylon Lock Nut With Nylon Cap Made With 66 Nylon Material. Powder Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size).
1
-
-
MULTIPURPOSE PLAY SYSTEM(ROTO) COSMOS. Size: 21.25ft X 12.5ft, Safe Play Area: 27.25ft X 18.5ft. The Arch Shaped (5 Nos) Side Frame Of Cosmos Are Made Up Of 100NB GI Pipe. Square Shape Pipe Is Made Up Of 16NB GI Pipe. Height Of The Arc Will Be 1.8 Mtr. 16mm Polyester Rope Galvanized Steel Wire Inside. The Curve Scrambler Shall Be Made Of 50 X 10 MS Flat And 30mm GI Pipes With 25mm GI Pipes Steps. The Structure Is Fabricated Out Of 40mm GI Pipe & 25mm GI Pipe. Roto Wave Slide Is Made Up Of Specially Formulated Food Grade LLDPE Mixed With UV Stabilizer & Antioxidants To Protect It From UV Rays & Its Effects & To Prevent Oxidization Respectively. The Chute Has Its End Such As It Causes Safe Landing Of The Child. The Landing Portion Should Be In Horizontal With Respect To The Ground. There Should Be Support Provided Made Up Of 25 NB GI Pipe. This Is A Double Wall Slide. The (5 Nos) Pad Shall Be Hanged &Vertical Pipe Will Be Made From 25 Mm NB G.I. Pipe. The Pads Shall Be Made In LLDPE. The Pad Shall Be Fitted Onto MS Circle Of 5 Mm Thick. Rope End Fastener Is Of High Strength Aluminium And Fixed With T Connector Or Bar Clamp Made Of Nylon 6/ Metal. Rope Cross-Over Connector Made With Nylon 6/ Metal. Rope End Connector Made From Nylon 6/ Metal. All GI Structure Is Powder Coated / PU Painted. Powder Coating With PP Powder Of Reputed Brand Only. To Be Fitted Using S.S. (Non Rusting) Nut Bolt 12 Mm &Nylon Lock Nut With Nylon Cap Made With 66 Nylon Material. Powder Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size).
1
-
-
MULTIPURPOSE PLAY SYSTEM(ROTO) WALL HOLA. Size: 7.92 X 1.21 X 4.57 M, Safe Play Area: 12x 6 M. DIMENSION: 26 Ft X 4 Ft X 15 Ft. MS PIPE OF 100X100X4MM USED FOR MAIN FRAME (14 Nos). MS PLATE OF 100X100X3MM USED FOR CLOSING THE END OF PIPES (14 Nos). MS PIPE OF 100X100X4MM USED FOR MIDDLE SUPPORT (24 Nos). MS ROUND MESH OF 6MM THICKNESS USED FOR COVERING THE MAIN FRAME OF WALLHOLLA (12 Nos). OUTER FRAMING OF MS ROUND MESH DONE USING 40X5MM FLATS. MS ANGLE 35X35X3MM USED FOR GROUTING THE WALLHOLLA (28 Nos). MESH (7 Ft * 4 Ft) MOUNTED FOR COVERING THE WALLHOLLA (24 Nos). 40X5 FLAT FOR SUPPORT TO FASTNERS. SLIDES MADE OF FRP ISO THALIC GRADE 6MM THICKNESS MOUNTED IN WALLHOLLA (4 Nos). WAVE SLIDE MOUNTED ON THE OUTER SIDE OF WALLHOLLA. WITH SAFE HEIGHT OF 6’ (1 Nos). ENTRY POINTS ARE PROVIDED AT LEFT OR RIGHT SECTION OF WALLHOLLA (2 Nos). ROPE SLIDES MOUNTED IN WALHOLLA (2 Nos). Dia32mm B-CLASS GI PIPE USED FOR ROPE SLIDE FRAME. Dia32mm B-CLASS GI PIPE USED FOR CLOSING THE TOP OF WALLHOLLA. STAIRS MOUNTED AT SIDE OF WALLHOLLA WITH SAFE HEIGHT OF 6 Feet. CLIMBING STEPS USED FOR CLIMBING UP TO WALLHOLLA Dia 32MM B-CLASS GI PIPE USED FOR SLIDING MESH FRAME IS WELDED BETWEEN MAIN FRAMES MAIN FRAME AND MIDDLE SUPPORT ARE FIXED TOGETHER BY FASTNERS OF GRADE SS-304 SLIDES, STAIRS, WAVE SLIDE ARE FIXED BY FASTNERS OF GRADE SS-304All Metal Parts Are Duly Painted With Automotive Paint. Powder Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size).
1
-
-
DOUBLE SLIDE ENTRY GATE (W40"XL33.5")
1
-
-
SINGLE SLIDE ENTRY GATE (W35"Xl40")
1
-
-
TUNNEL ENTRY GATE (DIA 25")
1
-
-
30 DEGREE TUNNEL PART
1
-
-
90 DEGREE TUNNEL PART
1
-
-
MIDDLE TUNNEL (110 CM)
1
-
-
MIDDLE TUNNEL (80 CM)
1
-
-
EXIT TUNNEL
1
-
-
Supply and Fixing of PlayAlive - Speed: Speed consists of upright posts of 2 No's of dia 89mm which are of stainless steel, 4 No's of poles of height of 65cms and 2 No's of poles of height of 45 cm and the console is made of HOT DIP Galvanized steel which is powder coated. The console is connected to the power supply box and connected to the satellite through a DEVICE NET CABLE and connected to the other satellites. The satellites are fixed on top of the structural poles. The satellite has an inbuilt sensor, inbuilt speakers and also LED lights. The speed comes with 4 Pre-loaded games (E-tennis ,Mind Match , Mirror and Free Play / Idle Mode ) . All components designed and manufactured to meet with EN 1176 safety standards.
Dimensions: 3.0 x 7.0M
1
-
-
Supply and Fixing of Infinity Bowl: All products must be tested and certified to meet EN 1176 safety standards. Infinity Bowl with its unique dipped edge design has been thoughtfully developed to increase inclusivity allowing far easier access into and out of the bowl. The bowl is designed to sit at an angle which further increases ease of access and provides a comfortable seated position while also enabling the bowl to self-propel, 5mm Mild Steel spun bowl. 33.7mm x 3mm Steel tube around bowl, Set at a 14 degree angle to aid sell use. The ground anchor made from 101.6mm x 3mm Steel tube. The equipment is HOT DIP Galvanized and Power Coated with sealed bearing housing which is maintaince free. The supplier must have carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. All joints are Robotic welded. All components designed and manufactured to meet with EN 1176 safety standards.
Equipment size - Dia : 0.72 m, ht 0.52 m
1
-
-
Supply & Fixing of 1200 mm Single Mound Slide: The Equipment comprises of 2 numbers of support are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing.A Single Straight slide of size (including exit panel) 2.22 m x 0.93 m x 3.0 m are to be schedule HOT DIP Galvanized steel with a 48 mm OD and 2.2mm (wall) thickness of the tubing.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as per EN1176 standards as a safety.All joints are Robotic welded. All components designed and manufactured to meet with EN 1176 safety standards. EMBANKMENT SLIDE DIMENSIONS: 2.22 m x 0.93 m x 3.0m
1
-
-
Supply & Fixing of Mound Rope Climber: 6 Numbers of Upright Structural post of size 1.2 m are to be schedule Galvanized steel with a 114 mm OD {Outer Diameter}. The poles are welded on to a base plate made from steel with 114mm inner diameter. Rope Climber of size 3.69 m x 1.02 m with the high durable rope of Dia 20 mm are all inter connected to each other and supported horizontally by steel rod of dia 32 mm. Plastic Components shall be animated and shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6 - 8mm. Bolts, nuts, screws, washers and etc. used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as per EN1176 standards. All joints are Robotic welded. All components designed and manufactured to meet with EN 1176safety standards.
PLAY EQUIPMENT DIMENSIONS: 3.69 m x 1.02 m x 1.80 m
1
-
-
Supply and Fixing of Challenger Course 1: Upright structural posts of height 0.55 m, 1.47 m , 1.55 m, 1.83 m, 2.0 m, 2.10 m, 2.36 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. Deck of size 1.16 m x 1.16 m, different levels of 0.3 m and 0.6 m shall be an all-Robotic welded assembly fabricated from perforated solid punched steel. Deck perimeter is precision pre punched for attachments. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm. Handrail of height 1.09 m and Dia 32 mm. Support Legs of height 76 mm, 190 mm, 240 mm and Dia 32 mm. Toprails Of Monkey Bars of size 3 m x 1.04 m, Net climber of size 2.5 m x 1.02 m (2 Nos), Monkey loop of size 2.47 m x 1.05 m x 1.95 m (1Nos), Vertical Rope climber of size 2.6 m x 0.14 m (4 Nos), Semi circle of Balance beam ,2 Nos of Rope bridge comprise of ropes of Dia 16 mm, Rope obstacle of Semi circle, Wavey climber comprise of ropes of Dia 16 mm, Rope bridge comprise of ropes of Dia 16 mm are all robotic welded fabricated from 48MM O.D. galvanized steel pipes for the outer bars and 32 mm OD galvanized steel for the inner parallel bars. All joints are Robotic welded. All components designed and manufactured to meet with EN 1176 safety standards. PLAY EQUIPMENT DIMENSIONS: 18.59 m x 11.47 m x 2.75 m
1
-
-
Supply & Fixing of Aventador: Curved structural posts of height 3.6 m, and 2.7 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. The poles are welded on to a base plate made from steel with 114mm inner diameter. Handrails of Dia 60 mm and 55 mm shall be an all-robotic welded unit, fabricated from galvanized steel pipes. Swing Seat of size 1.17 m x 1.17 m, Net curved Bridge of size 2.9 m x 0.88 m, Wiggle Triangle Crawl of size 1.16 m x 0.16 m (single triangle), Triagonal Stepping Pods of size 0.32 m x 0.32 m (single pod), Stepping Stones of Dia 0.28 m(single stone), Plastic Components [super thick plastic] shall be animated and shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6 - 8mm. Ring trek of size 3.1 m x 1.4 m, Twirl of size 3.0 m x 0.7 m, Spider Climber of size 3.0 m x 1.35 m and 8 Shaped Hole Climber of size 3.1 m x 2 m are all robotic welded fabricated from 60 MM O.D. galvanized steel pipes for the outer bars and 32 mm OD galvanized steel for the inner parallel bars. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as per EN1176 standards. All joints are Robotic welded. All components designed and manufactured to meet with EN 1176 safety standards. PLAY EQUIPMENT DIMENSIONS: 11.06 m x 10.36 m x 3.3 m
1
-
-
Supply & Fixing of Excalibur: Upright structural posts of height 2.2 m, 2.4m, 2.5m, 3.4 m, 3.5m, and 4.37m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. The poles are welded on to a base plate made from steel with 114mm inner diameter. Triangular Net Climber of size 3.2 m x 3.2 m x 0.53 m , Horizontal Rope Climber of size 0.75 m x 0.3m, Star climber of size 4.3 m x 0.6 m, Two Rotocrafts of size Dia 0.94 m x 0.88 m, Height 1.31 m, Interconnecting Rope Bridge of various size covered with Safety Net and supported by Triangular Shape piping are all robotic welded fabricated from 32 O.D. galvanized steel pipes for the outer pipes and 25mm O.D. galvanized steel for the inner parallel bars. Spiral Tube Slide of size (including exit panel) 3.06 m x 2.05 m x 3.57 m, Two Tube slide of size (including exit panel) 2.4 m x 1.82 m x 2.5 m, Double Slide of size (including exit panel) 2.04 m x 1.44 m x 2.07 m, Panels, Plastic Components shall be animated and shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6 - 8mm. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as per EN1176 standards. All joints are Robotic welded. All components designed and manufactured to meet with EN 1176 safety standards.
PLAY EQUIPMENT DIMENSIONS: 28.83 m x 22.84 m x 4.37 m
1
-
-
Supply and fixing of childern Multi Play Equipment VOYAGER (KPS-4950A-E-PVC) with double swing, curved side toddler slide with animated roof.
All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The equipment comprises of 4 numbers of Upright structural posts of height 2.6 m and 4 numbers of Upright structural posts 3.05 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm thickness of the tubing. Three numbers of Deck of size 1.14 x 1.14m and Staircase of size 1.50 m x 0.68 m are fabricated from 2mm perforated solid punched steel. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm. Handrail of height 2.21 m and Dia 32 mm. Frisbee Climber, Piped walls of size 2.7 m, Stepped Ladder Climber of thickness Dia 38 mm, Piped walls of Height 2.7 m. Sun Roof of Dia 1.9 m and height 0.9 m , Spiral Slide of size 2.18 m x 1.63 m x 1.88 m, Straight slide of size 1.66 m x 0.93 m x 0.9 m,Panels with color molded in and minimum thickness of 6 - 8mm. Toprails Of Swing of size 3.2 m x 1.14 m thickness of 2.2 mm galvanized steel pipes.All joints are Robotic welded. All components designed and manufactured to meet with EN 1176 safety standards.
PLAY EQUIPMENT DIMENSIONS: 8.24 m x 4.32 m x 4.10 m.
1
-
-
Supply & fixing of children multi play equipment VIVA (KPS-905A-E-PVC) : All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The equipment comprises of 4 numbers of Upright structural posts of height 2.2 m and 2 numbers of Upright Structural post of height 3.0 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. Two numbers of Deck of size 1.14 x 1.14m are fabricated from 2mm perforated solid punched steel. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm. Crab Roof of size 2.7 m x 1.8 m x 0.8 m, Straight Slide of size 2.22 m x 0.82m x 1.50 m, Straight Slide of size 1.72 m x 0.82 m x 1.20 m Snake Ladder Climber of thickness Dia 38 mm , Frisbee Climber, Panels with color molded in and minimum thickness of 6 - 8mm. Exposed hardware shall be covered with ultra violet stabilized plastic safety caps as per EN1176 standards as a safety feature against protruding hardware.All joints are Robotic welded. All components designed and manufactured to meet with EN 1176 safety standards.
PLAY EQUIPMENT DIMENSIONS: 5.53 m x 3.56 m x 3.60 m.
1
-
-
Supply & fixing of children multi play equipment ZEPHYR (KPS-307A-E-PVC) with spiral slide, monkey bar with number pannel. All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The equipment comprises of 4 numbers of Upright structural posts of height 2.47 m, 2 numbers of Upright structural posts 2.6 m and 4 numbers of Upright structural posts 4.2 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm thickness of the tubing. Four numbers of Deck of size 1.14 x 1.14m and Staircase of size 1.5m x 0.77 m are fabricated from 2mm perforated solid punched steel. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm. Handrail of height 2.2 m and Dia 32 mm. Frisbee Climber, Piped walls of size 2.7 m. Roof of size 1.9 m x 1.7 m x 0.77m, Spiral Slide of size 1.16 m x 1.6 m x 3.6 m, Double Slide of size 2.2 m x 1.5 m x 1.45 m, Panels with color molded in and minimum thickness of 6 - 8mm. Toprails Of Monkey Bar of size 1.8 m x 1.3 m.All joints are Robotic welded. All components designed and manufactured to meet with EN 1176 safety standards.
PLAY EQUIPMENT DIMENSIONS: 6.65 m x 5.24 m x 5 m.
1
-
-
WOODEN SERIES 3 DECK MPPS MATERIAL DESCRIPTION:
Panels: 15 mm non-slip HPL board and scandinavian pine wood boards IV risk class, 195x35 mm.
Posts: Laminated scandinavian machine strength graded pine wood IV risk class.
Plastic Parts: Polypropylene and polyethylene.
Metallic Parts: AISI-304.
Fixings: Steel conforming to 8.8 DIN267, AISI-304.
Rope: Swing net, Polypropylene covered braided multifilament rope.
All components designed and manufactured to meet with EN 1176 safety standards.
Maximum dimensions of parts : 310x46x41 cm
1
-
-
MPPS WOODEN SEIRES WITH NET CLIMBER MATERIAL DESCRIPTION:
Panels: 15 mm non-slip HPL board and scandinavian pine wood boards IV risk class, 195x35 mm.
Posts: Laminated scandinavian machine strength graded pine wood IV risk class.
Plastic Parts: Polypropylene and polyethylene.
Metallic Parts: AISI-304.
Fixings: Steel conforming to 8.8 DIN267, AISI-304.
Rope: Swing net, Polypropylene covered braided multifilament rope.
All components designed and manufactured to meet with EN 1176 safety standards.
Maximum dimensions of parts : 192x192x62,5cm
1
-
-
DOUBLE ARCH SWING.LEG SUPPORT :80 MM NB PIPE. SEAT- ANTI SKID RUBBER BELT. BEARING : HEAVY DUTY BALL BEARING. AREA : 6.0 M X 1.5 M. HEIGHT : 2.6 M. TOP BAR :50 MM NB PIPE. SUSPENSION : 6 MM RUBBER COATED CHAIN. In This One Child Can Enjoy The Swing At One Time. The Arch Shaped Side Frame Shall Be Made Of 80mm NB B Class GI Pipe Shall Be Made Up Of 50mm NB B Class GI Pipe. The Frame Shall Be Powder Coated To Give An Aesthetic Look. The Swing Shall Be Made Up Of 10mm Thick Anti Skid Rubber Top The Rubber Belt Seat Shall Be Suspended On 6mm Rubber Coated GI Chairn. The Bail Bearings Shall Be Mounted Inside A Specially Designed Nylon Clamp. Powder Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
TODDLER SWING.THE AREA :- 2.8M X 1.0M . In This Toddler Swing The Center Support Shall Be Made Up Of 80 Mm NB B Class G.I. Pipe. The Horizontal Bars Shall Be Made Up Of 50 Mm NB B Class G.I. Pipe. All GI Pipes Shall Be Powder Coated. Between The Two Horizontal Bars There Shall Be A Heavy-Duty Metal Clamp Attached To It. The Bucket Seats Of The Toddler Swing Shall Be Made Of Rubber With Anti Skid. The Ball Bearings Shall Be Mounted Inside Specially Designed Nylon Balls. The Rubber Seat Shall Be Affixed On 8 Mm Thick GI Chain. The Seats Shall Be Made With Full Care So That The Child Does Not Fall From It While Swinging. Powder Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
SPIRAL SLIDE. LADDER-FRAME- 25M M N B PIPE. HANDRAIL - 20 MM N B PIPE. CENTRE SUPPORT- 50 MM N B PIPE. AREA : 2.5 M X3.5 M. PLATFORM HEIGHT : 2.1 M. CHUTE F R P THE TOPCOAT IS DONE USING THE BEST QUALITY BRAND OR DULY POWDER COATED. Spiral Slide Shall Be Chute Made Of FRP (Fiber Reinforced Plastic / LLDPE (Low Linear Density Poly Ethyline) Having Thickness Of 4mm Slide Center Support Shall Be 80mm NB B Lass GI Pipe. Landing Module Shall Be Supported By 20mm NB B Class GI Pipe. Slide Extension Platform Shall Be Made From FRP / LLDPE. The Railing Shall Be Made From 15mm NB And 20nn NB B Class GI Pipe. All Pipes Shall Be Coated With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
ARCH SWING. LEG SUPPORT : 80 MM NB PIPE, SEAT- ANTI SKID RUBBER BELT. BEARING : HEAVY DUTY BALL BEARING. AREA : 3.0 M X 2.5 M. HEIGHT : 2.5 M. TOP BAR : 60 MM NB PIPE. SUSPENSION : 6 MM RUBBER COATED CHAIN. THE TOPCOAT IS DULY POWDER COATED. In This One Child Can Enjoy The Swing At One Time. The Arch Shaped Side Frame Shall Be Made Of 80mm NB B Class GI Pipe Shall Be Made Up Of 50mm NB B Class GI Pipe. The Frame Shall Be Powder Coated To Give An Aesthetic Look. The Swing Shall Be Made Up Of 10mm Thick Anti Skid Rubber Top The Rubber Belt Seat Shall Be Suspended On 6mm Rubber Coated GI Chairn. The Bail Bearings Shall Be Mounted Inside A Specially Designed Nylon Clamp. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
WAVE SLIDE.LADDER-FRAME- 25M M N B PIPE. HANDRAIL - 20 MM N B PIPE. CENTRE SUPPORT- 50 MM N B PIPE. AREA : 0.5 M X3.5 M. PLATFORM HEIGHT : 2.1 M. CHUTE FRP. THE TOPCOAT IS DONE USING THE BEST QUALITY BRAND OR DULY POWDER COATED. The Wave Slide Chute Shall Be Made Up Of 4mm Thick FRP / LLDPE Materials. The Structure Shall Comprise Of 20 And 25 Mm NB Bclass GI Pipes. The Center Support Shall Be Made In 90mm NB B Class GI Pipe. The Ladder Cum Railing Shall Be Made 20mm And 25mm NB B Class GI Pipes. The Platform Shall Be Made Up Of 14 SWG GI Sheet With Anti Skid For Firm Foot Grip. There Shall Be Triangular Steps 16 SWG GI Sheet. The Chute Shall Have Its End Such As It Causes Safe Landing Of The Child. The Pipes Shall Be Powder Coated Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
FRP BOX SLIDE.LADDER-FRAME-25MM N B PIPE. HANDDRIL-20 MM N B PIPE. SUPPORT-40 MM N B PIPE. AREA : 4.8 M X 0.5 M. PLATFORM HEIGHT : 2.1M. CHUTE :4.0 MM THK F R P. CHUTE LENGTH: 4 M. STEP-WIDTH- 75MM. THREAD 90MM. RISER 250MM. The Main Frame Of 2.1mtr Height Plat-Form Having Pipes Are Of 40 Mm NB B Class GI Pipe. The Box Slide Is Of Material FRP (Fibre Reinforced Plastic) With Attractive Beauty Colour And Flat Surface At End Of Slide For Safe Landing. The Reeling Made From 20 Mm NB B Which Can Be Use Like Handle To Get A Grip While Start Sliding. -The Staircase Made From 25 Mm NB B Class G.I. Pipe. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
MINI WAVE SLIDE. LADDER-FRAME-25MM N B PIPE. HANDDRIL-20 MM N B PIPE. SUPPORT-40 MM N B PIPE. AREA : 2.5 M X 0.5 M. PLATFORM HEIGHT : 1M. CHUTE :4.0 MM THK F R P. CHUTE LENGTH: 4 M /3 M. STEP-WIDTH- 75MM. THREAD 90MM. RISER 250MM. The Center Support Shall Be Made Up Of 50mm NB Gi B Class Pipe. The Slide Portion Shall Be Made In FRP (Fiber Reinforced Plastic) / LLDPE (Low Density Poly Ethylene) The Thickness Of The Mini Slide Shall Be 4mm With Proper Reinforcement To The Ruport The Module. The Triangular Steps Of The Slide Shall Be Of 16 SWG And Ladder Frame Shall Be Made In 20mm NB B Class Pipe. The Landing Support Shall Be Made Up Of 25mm NB GI B Class Pipe. The Ladder Shall Be Designed In Such A Way There Wont Be Entrapment Of Childs Foot While Playing. All The Sharp Edges And Comers Properly Grinded To Give Smooth Finish So That Children Shall Be Not Hurt While Playing. The Pure Polyester Powder Coating Shall Be Done On The Pipes To Extend The Life Of Equipments. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
ANIMAL MERRY GO ROUND.AREA : Ø 1.5 M. HEIGHT – 0.8 M. SEAT – ROTO MOULDED PVC ANIMAL SHAPE. MAIN FRAME: 40NB G.I.PIPE. BEARING: HEAVI DUTY BEARING. MS PLATE: 250X10MM. SUPPORT PIPE- 80NB. THE TOPCOAT IS DULY POWDER COATED. The Main Frame Of The Animal Merry Go Round Shall Be Made Up Of 25 & 40 NB B Class GI Pipes. The Stand Shall Be Made In 80 NB B Class GI Pipe. The Whole Structure Shall Be Mounted On Heavy Duty Bearing Shaft Permanently Lubricated With Water Sealant. The Animal Shall Be Made Out Of FRP (Fibre Reinforced Plastic)/LLDPE (Low Linear Density Poly Ethylene). It Shall Accommodate 4 Children At A Time. The Pipes Shall Be Powder Coated To Prevent Rusting. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
FOUR SEATED MERRY GO ROUND. AREA: 1.5 M. HEIGHT – 0.8 M. SEAT – MOULDED F.R.P. MAIN FRAME: 40 NB G.I. PIPE. BEARING : HEAVY DUTY BEARING. MS PLATE: 250X10MM. SUPPORT PIPE- 80NB. THE TOPCOAT IS DULY POWDER COATED. The Item Shall Be Having Its Main Frame Made Up Of 25 & 40. Mm NB “B” Class G.I. Pipe. The Stand Shall Be Made In 80 Mm NB “B” Class G.I. Pipe. The Whole Structure Shall Be Mounted On Heavy Duty Bearing Shaft. The Bearing Used Shall Be Of Heavy Duty Bearing Permanently Lubricated With Water Sealant. The Seat Frame Shall Be Made Out Of FRP (Fibre Reinforced Plastic)/LLDPE (Low Linear Density Ploy Ethylene). The Seats Shall Have Handrails So That The Child Does Not Fall. It Shall Accommodate 4 Children At A Time. The Powder Coating Shall Be Done On The Pipes To Avoid Rusting. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
WAVE LADDER.MAIN BODY :-32 MM N B GI PIPE. SUPPORT :- 25 MM NB GI PIPE. THE TOPCOAT IS DULY POWDER COATED. It Shall Have Main Frame Made Of 32 Mm G.I Pipe With Steps Made From 25 Mm G.I Pipe The Pipes Shall Be Powder Coated To Prevent Rusting And For Aesthetic Look. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
STD. SEE SAWHANDLE :-20 MM N B PIPE. LEVER-32 MM N B PIPE. COLMUN : 60 MM N B PIPE. BEARING : NYLON BUSH PRESS FITTED. SEATS: FRP SEATS WITH STEEL FRAME. THE TOPCOAT IS DULY POWDER COATED. The Level Of See Saw Shall Be Made From 15, 20 And 25mm NB B Class GI Pipe. The Seat Of See Saw Shall Be Made From FRP/LLDPE. The Stand And Bush Bearing Made In 40mm NB B Class GI Pipe. See Saw Lever Shall Be Welded To 5mm Thickness MS Plate For Nut Bolting With Stand. All Pipes Flat Shall Be Powder Coated To Avoid Rusting. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
SPRING RIDER DUCK:HEAVY DUTY TENSILE SPRING. AREA : 1.0. M X 0.5 M. HEIGHT : 0.5 M. DUCK :- PLASTIC MOLDED. Duck Shall Be Made Out From FRP (Fibre Reinforced Plastic)/LLDPE (Low Linear Density Poly Ethylene). The Handles Provided For Gripping Shall Be Made Up Of 15mm NB B Class GI Pipes. The Duck Shall Be Mounted On A Big Spring. Also A GI Flat Shall Be Provided For Foot Rest. The Spring Shall Be Mounted On 5mm Thick Plate And The Stand For Support Shall Be Made Out Of 40 NB Pipe. The Pipes Shall Be Powder Coated To Prevent Rusting. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
STRAIGHT NET CLIMBER. AREA : 0.5 M X 1.7 M. HEIGHT : 2.1 M. The Main Frame Of Straight Net Climber Shall Consist Of 40 Mm NB B Class GI Pipe. -The Joint Balls Shall Be Made From LLDPE (Low Linear Density Polyethylene) /PP Material With Group Screws Provision For Rope Holding. -O Hooks Of The Frame Having 50mm Bending Dia And Rod Dia 8mm. -The Loop Shall Be Given To Through O Hooks To Get A Grip While Climbing. -Rope Used Of PP Nylon Mix Type Having 22 Mm Diameter. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
HALF ROUND NET.AREA : 3.3 M X 1.7 M. HEIGHT : 2.1 M. The Main Frame Vertical Pipes Of Straight Net Climberare Made From 50 Mm NB B Class GI Pipe. -The Curve Pipes Are Made From 32 Mm NB B Class GI Pipe. -The Joint Balls Shall Be Made From LLDPE (Low Linear Density Polyethylene) /PP(Pure Propylene) Material With Grip Screws Provision For Rope Holding. -O Hooks Of The Frame Having 50mm Bending Dia And Rod Dia 8mm. -The Loop Shall Be Given To Through O Hooks To Get A Grip While Climbing. -Rope Used Of PP Nylon Mix Type Having 22 Mm Diameter. Powder Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
CROSS &ZERO AREA :0.6 M X 0.6 M. HEIGHT : 1.00 M. Triangular Cross And Zeros Are Made From LLDP/PP Material Which Having In Built Cross And Zeros Embossed. -The Support Frame Is Made Up From 25mm NB Medium Class G.I. Pipe. There Shall Be Two Seats Providedwhich Shall Be Made Out Of Mouldedplastic In Roto Molding Process. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)
1
-
-
ZIG ZAG BALANCE BEAM:LENGTH 4M X WIDTH 101.6 MM X HEIGHT 457.2 MM NB "B" Class G.I. Pipes.
1
-
-
MULTI PURPOSE SWING :
The main frame OF Mutipurpose swing is made of GI pipe 5" dia used. Rubber coated chains of 6 mm are used. Swing belts are made of rubber reinforced wire mesh.Tyre swing are made of HDPE.Garden swing shall be made of m.s pipe of different sizes.High quality rope is used for climbing.Different NB GI-pipes are used to make bridge ladders,monkey bar and loop rung.All the metal pipes shall be powder coated or painted with high quality automotive paint. Canopy: Center pole is 5” in diameter made of G.I.pipe of 10 ft height. Skeletal structure of canopy shall be made of 25 nb GI pipe .Roof of the Canopy shall be made of high quality tensile membrane sheet of 0.5-1 mm thickness. All the metal pipes shall be powder coated or painted with high quality automotive paint.Bench frame is made of 40x40 MS pipe.Upper seating frame is made high quality water proof wood of 25 mm thickness. All the metal pipes shall be powder coated or painted with high quality automotive paint..
1
-
-
Supply Of Cajon. Made From 316L Mirror Polished Marine Grade Stainless Steel. The Dimensions Are 470x420x340mm.It Weigh 20 Kg Approximately. The Equipment Includes Nuts & Bolts For Pole Protection At Platform In Foundation Cement Concrete (1:2:4) Block Size Of 0.45x0.45x0.50m.
1
-
-
Supply Of Babel Drum (Small Size)Steel Tongue Drum Is Of 300 Mm Diameter With 06 Numbers Laser Cut Tongues Tuned To C-Major Pentatonic. Made Of 316L Mirror Polished Marine Grade Stainless Steel Having Width Of 490 Mm And Height Of 980 Mm. The Body Should Have Drain Hole In Base Body. The Body Should Have Drain Hole In Base Body. The Minimum Weight Is 13 Kg Approximately. The Work Includes Nuts & Bolts For Pole Protection At Platform In Foundation Cement Concrete (1:2:4) Block Size Of 0.45x0.45x0.50m
1
-
-
Supply Of Babel Drum (Large Size) Steel Tongue Is Drum Of 470 Mm Diameter With 06 Numbers Laser Cut Tongues Tuned To C-Major Pentatonic. The Body Should Have Drain Hole In Base Body. The Body Should Have Drain Hole In Base Body. Made Of 316L Mirror Polished Marine Grade Stainless Steel Having Width Of 510 Mm And Height Of 820-1080 Mm. The Minimum Of Stainless Steel Should Have 17 Kg Approximately. The Work Includes Nuts & Bolts For Pole Protection At Platform In Foundation Cement Concrete (1:2:4) Block Size Of 0.45x0.45x0.50m
1
-
-
Supply Of Papilio BellsConsists Of Total 32 Notes With 16 Notes Divided On Either Side. The Notes Are Made From 6000 Series Alloy 25mm Silver Anodised Aluminium. It Is Tuned To C Major Pentatonic C4-C7. The 4 Mm Nylon Coated 300 Series Stainless Steel Cable . The Frame Is In 3 Parts Made Of 300 Series Marine Grade Mirror Polished Stainless Steel Tube Of 51mm Od And 2 Mm Wall Thickness. Four Nos. Of Beaters Are Provided To Play The Instrument. The Dimensions Are 2450 Mm X 810 Mm X 1110 Mm . It Weighs 36 Kg Approximately.The Work Includes Nuts & Bolts For Pole Protection At Platform In Foundation Cement Concrete (1:2:4) Block Size Of 0.45x0.45x0.50m
1
-
-
Supply Of CongasMade Up Of Vertical Post Of 316L Marine Grade Stainless Steel Having 76.2 Mm Dia With HDPE Mounting Bracket Pre Drilled With M-10 Captine Nuts To Receive M-10 Bolts With 30x 30mm Square. The Body With U-Pvc Plastic Sound Resonators Painted With 2 Pack Lead Free PU Paint. Heavy Duty ABS Drum Caps Painted With 2 Pack Lead Free PU Paint Affixed With Vandal Resistant Screws. The Drums Are Of 600 X 2000mm Diameter & 600 X2500 Mm In Size. The Body Is Finished With Required Colour. The Caps Secured To Bodies With SS M6x20mm Bolts. The Equipment Is Fixed In The Ground With Help Of Galvanised Steel Anchors. The Minimum Weight Width Of Stainless Steel Should Be 10 Kg Approx. The Work Includes Nuts & Bolts For Pole Protection At Platform In Foundation Cement Concrete (1:2:4) Block Size Of 0.45x0.45x0.50m
1
-
-
Supply Of Akadinda The Frame Is Made From Treated Pine Wood Of 1700 X 250x 250 Mm In Size Weighing Approximately 25 Kgs. The Beaters Are Provided To Play The Instrument. It Gives A Natural Mellow, Low Tone, Tuned To The Pentatonic Scale In C Major A2-D5. Because It's So Large, It's Loud. There Are 13 Notes Made From Padauk Hardwood Measuring 19 X90 Mm. It Weighs 40 Kg Approximately.The Work Includes Nuts & Bolts For Pole Protection At Platform In Foundation Cement Concrete (1:2:4) Block Size Of 0.45x0.45x0.50m.
1
-
-
Supply Of Rainbow SambasBody Made Of U-Pvc Plastic Sound Resonators Painted With 2 Pack Lead Free PU Paint. Heavy Duty ABS Drum Caps Painted With 2 Pack Lead Free PU Paint Affixed With Vandal Resistant Screws. The Body Is Finished With Required Colour. The Caps Secured To Bodies With SS 6x20mm Bolts. The Equipment Is Fixed In The Ground With Help Of Galvanised Steel Anchors. The Weight Of Complete Ensemble Shall Be 43.5 Kg Approx. The Drums Are Of Varied Sizes Having Widths Starting From 160-400 Mm And Height Measuring Minimum 550 Mm To 850 Mm Maximum.The Work Includes Nuts & Bolts For Pole Protection At Platform In Foundation Cement Concrete (1:2:4) Block Size Of 0.45x0.45x0.50m
1
-
-
Supply Of Pentatonic Tembos, Frame Made Of 300 Series Marine Grade Mirror Polished Stainless Steel Tube Of 76mm OD. It Comprises Of 6 Notes Made Of 76 OD 300 Series Marine Grade Mirror Polished Stainless Steel Tube. The Notes Are Fixed With HDPE Protective Ends Caps With Perforated Stainless Steel Covers. The Notes Are Tuned To Produce C Major Pentatonic C3-C4 Notes. Two Numbers Of Firm Closed Cell Neoprene Paddles With Rubber Coated Handles Fixed With Vandal Resistant 300 Series Stainless Steel Fixings Are Provided To The Play The Instrument. The Work Includes Nuts & Bolts For Pole Protection At Platform In Foundation Cement Concrete (1:2:4) Block Size Of 0.45x0.45x0.50m.The Dimensions Of Instrument Are 580x530x2730mm And Weighs 80 Kilograms Approximately.
1
-
-
Supply Of Chimes And Bells HarmonyConsists Of A Cradle Design Frame Made Of 300 Series Marine Grade Mirror Polished Stainless Steel Tube. There Are 11 Notes Made From 6000 Series Ally 25mm Thick Silver Anodised Aluminium Tube 0f 51mm OD Having 2mm Wall Thickness. Two Nos Vandal Resistant Beaters Fixed With A 5mm Nylon Coated 300 Series Stainless Steel Cable Is Provided To Play The Instrument To Produce Major Pentatonic C5-C7. It Weighs 19 Kg Approximately.The Work Includes Nuts & Bolts For Pole Protection At Platform In Foundation Cement Concrete (1:2:4) Block Size Of 0.45x0.45x0.50m
1
-
-
Supply Of CadenzaMade Up Of Vertical Post Of Stainless Steel Of Garde 316 Having 76.2 Mm Diameter And Instrument Body. Mechanized Black HDPE Sandwich Construction With Black Anodised 6063 Resonators, Alluminium Alloy Silver Anodised Notes Secured At Nodal Point With Necessary Screw M6*60mm. The Minimum Weight Of Stainless Steel Should Be 10 Kg. The Work Includes Nuts And Bolts (Hilti Make) For Pole Protection At Bottom Platform In Foundation Of Cement Concrete (1:2:4) Block Of Size 0.45*0.45*0.45m And As Approved By Engineer-In-Charge. The Rates Include Cost Of Material, Transportation, Set-Up, Dismantling And Site Clearing. The Site Has To Be Cleaned After Commissioning Of Instruments As Per The Direction Of Engineer-In-Charge.
1
-
-
Supply Of Free ChimesMade Up Of 02 Nos. Leg Of Stainless Steel, Grade 316 Having 76.2 Mm Diameter And Instrument Body Machined Black HDPE Mounting Backboards. The Instrument Should Have 12 Nos. Stainless Steel 304 Grade Tumbled Brackets With Rubber Grommet & Rivnut Inserts Securing M6 Mc Screw. Notes Are Made Up Of Silver Anodised Aluminium Alloy Notes C5-C6. The Minimum Weight Of Stainless Steel Should Be 13 Kg. The Work Includes Nuts And Bolts (Hilti Make) For Pole Protection At Bottom Platform In Foundation Of Cement Concrete (1:2:4) Block Of Size 0.45*0.45*0.45m And As Approved By Engineer-In-Charge. The Rates Include Cost Of Material, Transportation, Set-Up, Dismantling And Site Clearing. The Site Has To Be Cleaned After Commissioning Of Instruments As Per The Direction Of Engineer-In-Charge.
1
-
-
Ethylene-Vinyl Acetate (EVA) Swing Seat With 2 S Hook TYB-S04,. Material: EVA Seat, Stainless Steel S Hook Seat Dimensions(CM)：66 X 14 X 1
1
-
-
EVA Bucket SwingWith 2 S HookTYC-S05. Material: EVA Seat, Stainless Steel S Hook, StainlessSteel Triangle Bracket, Steel Plate With Dacromat. Seat Dimensions( In CM)：27.5 X 30 X 29 Stainless Steel Triangle Bracket
1
-
-
U Shape Swing SeatWith 2 Eye BoltTYB-S06. Material: PE Seat, Galvanized Steel Eye Bolts. Seat Dimensions(In CM)：53 X 20.5 X 20
1
-
-
Glider Swing With 4Eye BoltTYT-S03. Material: PE Seat, Galvanized Steel Eye Bolts. Dimensions(CM)：98 X 38/19 X 62.5
1
-
-
Standing Swing With2 Triangle BracketTYS-P02. Material: PE Seat, Galvanized Steel Triangle BracketSeat Dimensions(CM)：36 X 36 X 4
1
-
-
Climbing RockP6. Material: PP Dimensions(CM)：11.7 X 8 X 4
1
-
-
Climbing Rock P7. Material: PP. Dimensions(CM)：11 X 9.2 X 4.8
1
-
-
Climbing Rock P8. Material: PP. Dimensions(CM)：10.5 X 9 X 4.5
1
-
-
Climbing RockP9-1. Material: PP 2. Dimensions(CM)：10.2 X 6.4 X 4.3/10 X 6.5 X 3.5
1
-
-
Climbing RockP9-2. Material: PP. Dimensions(CM)：10.2 X 6.8 X 4.4/10.2 X 6.7 X 4.4
1
-
-
Swing Clamp. Swing Clamp Made Of Nylon With Bearing Inside.
1
-
-
Swing Chain. Made 0f Mild Steel Machine Welded 0f 6 Mm Thickness Pvc Coated Of 5' Length.
1
-
-
S-Hook Made Stainless Steel 304 GradeMade Stainless Steel 304 Grade
1
-
-
16MM 6x8+FC PP COMBINATION ROPE
1
-
-
Supply & Installation of 16mm thick polypropylene rope use for children play equipment
1
-
-
16MM Aluminium Ferrules
1
-
-
16MM Aluminium Single Connecting ROD
1
-
-
16MM Fork Connecting Rod
1
-
-
16MM Single ferrules
1
-
-
16MM T-Joint Plastic Ferrules
1
-
-
16MM T-Joint Aluminium Ferrules
1
-
-
16MM T-Joint Aluminium Ferrules
1
-
-
16MM T-Jonit Aluminium Spraying Plastic Ferrules
1
-
-
16MM Plastic Cross Joint Ferrules
1
-
-
16MM Aluminium Cross Joint Ferrules
1
-
-
16MM Aluminium Joint Ferrules
1
-
-
16MM Aluminium Spraying Plastic Cross Joint Ferrules
1
-
-
16MM Stainless Steel Ferrules
1
-
-
16mm Stainless Steel U Hook
1
-
-
16mm Stainless Steel S Hook
1
-
-
16MM PA Ferrules
1
-
-
Rope Clamp
1
-
-
MPPS Clamp
1
-
-
CONNECTOR FOR MPPS Clamp
1
-
-
MPPS Railing
1
-
-
FRP Spiral Slide Chute 1.5 Mtr Height
1
-
-
FRPWave Slide Chute 1.5 MtrHeight
1
-
-
FRPWave Slide Chute 2.1 MtrHeight
1
-
-
FRPMini Wave Slide Chute 0 .9 MtrHeight
1
-
-
FRP BOX SLIDE 1.5mtrHeight
1
-
-
FRPSpiral Slide Chute 2.1 Mtr Height
1
-
-
30209 J2/Q Tapered Bearing
1
-
-
6209 J2/Q Tapered Bearing
1
-
-
MGR and AMGR assembly as per direction of officer in charge
1
-
-
See Saw Seat Made in FRP material as per direction of officer in charge as per direction of officer in charge
1
-
-
MPPS Swing Bridge Plank
1
-
-
FRP made Duck for as per direction of officer in charge
1
-
-
FRP wide slide 0.9 mtr.
1
-
-
Sea Saw plank
1
-
-
Pin (Sea saw)
1
-
-
MPPS SWING BRIDGE
1
-
-
DUCK SPRING FRAME
1
-
-
TUNNEL:2 FT DIA X 6 FT LONG 25 SQFT FRP TUNNEL.
1
-
-
SBR Tile Of 25mm For Flooring Providing And Fixing Of SBR (Styrene Butadene Rubber)Tiles 0f 25 Mm Thickness Using Good Quality Adhesive To Paste It On Floor.
1
-
-
Providing And Laying Of EPDM (Ethylene Propylene Diene Monomer) 25mm Thickness And 500 X 500 Mm Size Of Good Quality .
1
-
-
SBR And EPDM MIX Rubber Flooring Of 36mm Thickness Over Well Layed Cement Concrete Surface At Site In Designs And Patterns As Per The Directions Of Officer In Charge Of The Site Using Good Quality Of Binder Or Adhesive .
1
-
-
Providing And Laying Of EPDM Flooring Of 15mm Thickness , Applying Airethane Primer Over Dry Cement Concrete Surface, Laying 13mm Base Layer Made Of SBR Granules 1-4mm , Binded Together Using Airethane Binder, Sealed Using SBR Black Dust Binded In Airethane Sealant. Laying 2mm Airethane Top Coat Topped With Matt Finish Coating (EDMP) And Marked With Line Paint
1
-
-
Providing And Laying Of Artificial Turf Grass Having Piles Of 35 Mm Height With Following Specifications: Density: 18900 Stitches/Sqm ± 3%, DTEX: 6700, PE (C-Shape) + PP Curl, Backing: PP Cloth + Mesh + Black SBR Latex
1
-
-
4mm Thick ACP SHEET
1
-
-
Technical Specification For The Container Male Toilet Size - 20'X10'X8.6' Ms Structure : Ms Structure: Corner Post 100X100Mm At Four Corner ; And Top And Bottom Rail With 100X100Mm Sq Pipes ; Truss - 75X38M And Purlins 50X50Mm And Floor Cross Sections 75X38Mm Etc Walls -Exterior Side : 1.2Mm Ms Profiled Sheet All Aorund Duly Welded 2 Coats Of Red Oxide Primer & Painted With Blue Colour In Exterior Body And Interior Side: 3Mm Alluminum Composite Sheet 3Mm And Joints Concealed With Aluminum Beading Etc
Roof: 1.2Mm Ms Plain Sheet All Around Duly Welded Held On Ms Framework False Ceiling : Ms Pipe Framework With 8Mm Thick Pvc Profile Sheet Insulation : 50Mm Thick Glasswool Insulation With 48 Kg Density Etc For Walls And Roof Floor : 18Mm Thick Cement Fibre Board Held On Ms Pipe Framework Flooring Tiles : 300X300Mm Anti Skid Tiles Laying And Fixing Etc With Adhesives 1 Coat Of Anti Termite Treatment On Floor Window : Aluminum Extruded Sections With Sliding Sections With Normal Plain Glass And Locking Arrangements Etc With Weather Shed And Ms Grill From -2.5Ftx 2.5Ft Outside- 2No . Enterance Door : Ms Pipe Framework With Ms Sheet From Outside And Aluminum Composite Sheet From Inside And With Locking Arrangement Etc - 7Ft X3Ft – 1 Internal Door: Aluminum Framework Extruded Sections With Pvc Profile And Aluminum Door Framework - 6X2.5Ft - 5No . Electrical Points And Accessories - 5Amp ,15Amp And 32Amp Points With 1.5Mm; 2.5Mm And 4Mm With Modular Switches And Pvc Conduit Pipes , Accessories: Tubelight ( 2No) ; Led - 7No And External Light -2No, Ex Fan - 7No ; 15Amp - 2No Paint And Finishing- One Coat Of Primer And Two Coat Of Synthetic Enamel Paint With Spray Gun Etc 0Lifting Arrangement: Ms Plate 8Mm Hooks At Four Corner To Lift The Container Etc. Sanitary Accessories: All Internal Connection With Upvc Pipes For Water And Sewage And Internal Drainage Pipeline; Standard - Ceramics Ware - Ewc With Cistern Complete With Accessories ; Wash Basin With Complete Accessories - 2No And Urinal With All All Accessories - 5 No Etc Other Accessories : Mirror- 10Ft X3Ft ; Hand Dryer -1 No And 1000 Liter Water Tank With Ms Stand And All The External Connections Etc.
1
-
-
Technical Specification For The Container Female Toilet Size 20'X10'X8.6' Ms Structure : Ms Structure: Corner Post 100X100Mm At Four Corner ; And Top And Bottom Rail With 100X100Mm Sq Pipes ; Truss - 75X38M And Purlins 50X50Mm And Floor Cross Sections 75X38Mm Etc Walls -Exterior Side : 1.2Mm Ms Profiled Sheet All Aorund Duly Welded 2 Coats Of Red Oxide Primer & Painted With Pink Colour In Exterior Body And Interior Side: 3Mm Alluminum Composite Sheet 3Mm And Joints Concealed With Aluminum Beading Etc Roof: 1.2Mm Ms Plain Sheet All Around Duly Welded Held On Ms Framework False Ceiling : Ms Pipe Framework With 8Mm Thick Pvc Profile Sheet Insulation : 50Mm Thick Glasswool Insulation With 48 Kg Density Etc For Walls And Roof Floor : 18Mm Thick Cement Fibre Board Held On Ms Pipe Framework Flooring Tiles : 300X300Mm Anti Skid Tiles Laying And Fixing Etc With Adhesives 1 Coat Of Anti Termite Treatment On Floor Window : Aluminum Extruded Sections With Sliding Sections With Normal Plain Glass And Locking Arrangements Etc With Weather Shed And Ms Grill From -2.5Ftx 2.5Ft Outside- 2No. Enterance Door : Ms Pipe Framework With Ms Sheet From Outside And Aluminum Composite Sheet From Inside And With Locking Arrangement Etc - 7Ft X3Ft – 1 Internal Door: Aluminum Framework Extruded Sections With Pvc Profile And Aluminum Door Framework - 6X2.5Ft - 5No .Electrical Points And Accessories - 5Amp ,15Amp And 32Amp Points With 1.5Mm; 2.5Mm And 4Mm With Modular Switches And Pvc Conduit Pipes , Accessories: Tubelight ( 2No) ; Led - 7No And External Light -2No, Ex Fan - 7No ; 15Amp - 2No Paint And Finishing- One Coat Of Primer And Two Coat Of Synthetic Enamel Paint With Spray Gun Etc Lifting Arrangement: Ms Plate 8Mm Hooks At Four Corner To Lift The Container Etc. Sanitary Accessories: All Internal Connection With Upvc Pipes For Water And Sewage And Internal Drainage Pipeline ; Standard - Ceramics Ware - Ewc With Cistern Complete With Accessories ; Wash Basin With Complete Accessories - 3No Etc. Other Accessories :Mirror- 10Ft X3Ft ; Hand Dryer -1 No Etc And 1000 Liter Water Tank With Ms Stand And All The External Connections
1
-
-
Container Based Office Block : Supply, designing, fabrication and installation of Office block using container of size (LxBxH) 20’0”x8’0” X 8’6” Structure shall be made in MS pipes of size 50 X 25 X 2mm (at 04 walls and false ceiling of the container) with provision of nut-bolts / fastners. The flooring shall be made using ceramic tiles of reputed brand having size 1' X 1'. Walls shall be made using MDF Board leak proof/water proof of 6mm thickness and having adequate provision for thermal insulation, door Wardrobe, PVC office curtain & 2 window for air ventilation. Door shall be made using GI Sheet on the outside and MDF Board on the inside having size 7'x3'. Addition to this, 1 PVC doors shall be provided in the Toilet of size 8'x5'. Toilet shall have 1 Nos Toilet pots (EWC) with all sanitary and CP fittings with tap, towel ring, paper holder including all plumbing works with GI/PVC in each unit and good quality mirror. The office block shall also have necessary arrangements of lighting such as Lights, 6 Nos. 6 watt conceal spot light, 2 Nos. 15 watt LED Tube Lights, 4 Power sockets 16 Amp., AC Power Socket 32 Amp., 1 Nos. , 3 Nos. Exhaust fans, 2 nos. small cealing fan and 2 Nos. water proof bulkhead wall spot light for outside. The container(s) should be placed in the balanced manner & should be properly grouted in the ground. All the metal parts shall be duly painted using good quality of paint.(As per direction of the officer-in charge)
1
-
-
Container Based Store Room: Supply, designing, fabrication and installation of store room using container of size (LxBxH) 20’0”x8’0” X 8’6” Structure shall be made in MS pipes of size 50 X 25 X 2mm with provision of nut-bolts / fastners. The flooring shall be made using ceramic tiles of reputed brand having size 1' X 1'. Walls shall be made using MDF Board of 6mm thickness. Door shall be made using GI Sheet on the outside and MDF Board on the inside having size 7'x3'. The Store room shall also have necessary arrangements of Window and lighting such as Lights, 2 Nos. 6 watt conceal spot light, 2 Nos. 15 watt LED Tube Lights, 2 Power sockets 16 Amp., 1 Nos. Exhaust fans and 2 Nos. water proof bulkhead wall spot light for outside. The container(s) should be placed in the balanced manner & should be properly grouted in the ground. All the metal parts shall be duly painted using good quality of paint.(As per direction of the officer-in charge)
1
-
-
Providing and fixing stainless steel (Grade 304) galing made of Hollow tubes, channels, plates etc., including weiding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, vc fixing the railing with necessary accessories & stainless steel dash tasteners, stainless stool bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge. (for payment purpose only weight of stainless steel members shall be considered excluding faxing accessories such as nuts, bolts. fasteners etc.).
1
-
-
Supply of sign boards of 0.91 x 0.61m size with support length of 3000 mm. Manufacturing, supplying and fixing of Retro reflective sign boards made of 2 mm thick aluminum sheet face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type – IV of ASTM-D 4956-01 in green and silver white including subject matter, message (bilingual(, symbol and borders etc as per IRC: 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 And fixing the same with suitable sized aluminum alloy rivets @ 20 cm c/c to back support frame of m.s angle iron of size 35x35x5 mm and m.s flat of 25x5 mm along with theft resistant measures, mounted and fixed with 2 nos. clamp of mls flats of size 25x5 mm to a vertical post of 3 mtr height made up of msl pipe of 60 mm n.b welded with two hold fast of m.s angle 25x25x3mm of 30cm length each at bottom and including making holes in pipes, angles, providing & fixing m.s message plate of required size, steel work to be paired with two or more coats of synthetic enamel paint of required shade and of approved brand and manufacture over a priming coat of zinc chromate yellow primer (vertical post to be painted in black/white/grey color) Backside of aluminum sheet to be painted with two or more coats of epoxy paint over an appropriate priming coast including all leads and lifts etc. complete as per drawing, specification and direction of Officer-in Charge
1
-
-
Supply of sign boards of 1.22 x 1.83m size with with support length of 4570 mm. Manufacturing, supplying and fixing of Retro reflective sign boards made of 2 mm thick aluminum sheet ,face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type –IV of ASTM-D 4956-01 In green and silver white including subject matter, message(bilingual),symbol and borders etc as per IRC:67-2001 , pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 And fixing the same with suitable sized aluminum alloy rivets @ 20 cm c/c to back support frame of m.s angle iron of size 35x35x5 mm and m.s flat of 25x5 mm along with theft resistant measures, mounted and fixed with 2 nos clamp of m.s flats of size 25x5 mm to a vertical post of 4.57 mtr height made up of m.s pipe of 10 mm n.b welded with two hold fast of m.s angle 25x25x3mm of 45cm length each at bottom and including making holes in pipes, angles ,providing & fixing m.s message plate of required size ,steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand and manufacture over a priming coat of zinc chromate yellow primer (vertical post to be painted in black/white/grey color)Backside of aluminum sheet to be painted with two or more coats of epoxy paint over an appropriate priming coat including all leads and lifts etc. complete as per drawing ,specification and direction of Officer-In -Charge
1
-
-
Providing and fixing made of MS sheet 90X60cm. thick with frame of MS angle 50X50X6mm to diagonal braces at the back of the sheet of MS flat 40X6mm, total height of the board above ground level 2.40m, length of legs below ground 0.30m embedded in CC block 1:2:4 (1cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size) 30X30X15 cm. including excavation and removal of surplus earth within 50m. lead Applying priming coat of approved steel primer, painting with synthetic enamel paint of approved quality and lettering with enamel paint of approved color (one side) as per drawing / direction of Engineer/Work-in-charge.
1
-
-
SUPPLY AND FIXING OF METRO SHEET PRE PAINTED GALVANIZED HI-RIB ROOFING/CLADDING SYSTEM COMPRISING OF PROFIT SHEETING HAVING 1060MM COVER WIDTH, LENGTH 3657.6 (12 FOOT) THICKNESS 0.50MM. THE SHEET SHALL HAVE MINIMUM TWO/THREE SMALL STIFFING RIBS IN BETWEEN PANS, ZINC COATING MASS TOTAL OF (BOTH SIDE) AS PER IS:277, WITH COATING OF REGUALR MODIFIED POLYESTER PAINT (RMP) SYSTEM AS PER IS:12246. THE COLOR COATING SHALL COMPRISE OF 15-20 MICRON FINISH COAT OVER 5-7 MICRON PRIMER COAT ON THE EXPOSED SIDE AND 5-7 MICRON OVER 5 MICRON PRIMER ON BACK SIDE (AS PER DIRECTION OF OFFICER IN CHARGE.)
1
-
-
Supply & Installation of Biodigester septic Tank of good quality made of Fibre Reinforced Plastic / FRP with tank structure of minimum 35x5mm made of MS angle with FRP wall of 5mm and dimensions of tank as 4400x2000x1200mm.
1
-
-
Water Stoarge 80 Ltr,Cooling Capacity (l/hrs) 60, Compressor Type : Reciprocating compressor,Nominal demand(glasses per hr.); 300,Panel Material:SS 304 Food Grade
1
-
-
Artificial Plant Tiles ( Vertical garden plant tiles )
1
-
-
Agro shed net
1
-
-
Sensory wall" is an umbrella term used to categorize a broad variety of therapeutic spaces specifically designed and utilized to promote self-organization and positive change. There are multiple types of sensory rooms and purposes for use that have been created and implemented in different practice areas to date. When used appropriately, sensory wall :
1
-
-
Cartoon Carectors Wall Painting
1
-
-
Artistic Painting Floor & Wall
1
-
-
Product series Elastic Interlocking Series
Size 304.8*304.8*12.7mm, Thickness: 12.7mm,Material TPE +PP
Color Any color can be customized, Quality Premium
Smell Odourless, Softness Medium, Expiration Date 5 years
(Applications Professional futsal field, Professional basketball court, Cage stadium/basketball/volleyball Court, Kindergarten
ground/playground, Outdoor futsal, Leisure and non-slip ground,etc.)
1
-
-
Supply and laying of Geotextile on all over the surface including trenches
1
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil cum
1
-
-
Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge.
1
-
-
PROVIDING AND LAYING IN POSITION CEMENT CONCRETE OF SPECIFIED GRADE EXCLUDING THE COST OF CENTERING AND SHUTTERING - ALL WORK UP TO PLINTH LEVEL :1:5:10 (1 CEMENT : 5 COARSE SAND (ZONE-III): 10 GRADED STONE AGGREGATE 40 MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)
1
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 5.22.1 Mild steel and Medium Tensile steel bars
1
-
-
PROVIDING AND LAYING VITRIFIED FLOOR TILES IN DIFFERENT SIZES (THICKNESS TO BESPECIFIED BY THE MANUFACTURER) WITH WATER ABSORPTION LESS THAN 0.08%AND CONFORMING TO IS: 15622, OF APPROVED MAKE, IN ALL COLOURS AND SHADES,LAID ON 20MM THICK CEMENT MORTAR 1:4 (1 CEMENT : 4 COARSE SAND), (AS PER DIRECTION OF OFFICER IN CHARGE.)JOINTING WITH GREY CEMENT SLURRY @ 3.3 KG/ SQM INCLUDING GROUTING THEJOINTS WITH WHITE CEMENT AND MATCHING PIGMENTS ETC.SIZE OF TILE 800X800 MM, COMPLETE. (AS PER DIRECTION OF OFFICER IN CHARGE.)
1
-
-
STEEL WORK IN BUILT UP TUBULAR(HOT FINISHED WELDED TYPE ROUND, SQUARE, RECTANGULAR HOLLOW TUBES ETC.) TRUSSES, SEATING ARRANGEMENT ETC INCLUDING CUTTING, HOISTING, FIXING IN POSITION AND APPLYING A PRIMING COAT OF APPROVED STEEL PRIMER, INCLUDING WELDING AND BOLTED WITH SPECIAL SHAPED WASHERSETC. COMPLETE (AS PER DIRECTION OF OFFICER IN CHARGE.)Hot finished welded type tubes
1
-
-
SUPPLYING AND SPREADING OF SAND IN LAWN AREA, INCLUDING WATERING, MIXING AND DRESSINGCOMPLETE. (AS PER DIRECTION OF OFFICER IN CHARGE.)
1
-
-
SUPPLYING AND STACKING OF RED BAJRI (AS PER DIRECTION OF OFFICER IN CHARGE.)
1
-
-
FINISHING WALLS WITH ACRYLIC SMOOTH EXTERIOR PAINT OF REQUIRED SHADE NEW WORK (TWO OR MORE COAT APPLIED @ 1.67 LTR./10 SQM OVER AND INCLUDING PRIMING COAT OF EXTERIOR PRIMER APPLIED @ 2.20 KG/10 SQM) (AS PER DIRECTION OF OFFICER IN CHARGE.)
1
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,
shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard settingof concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.ALL WORKS UPTO PLINTH LEVEL
1
-
-
PROVIDING AND LAYING AT OR NEAR GROUND LEVEL FACTORY MADE KERB STONE OF M-25 GRADE CEMENT CONCRETE IN POSITION TO THE REQUIRED LINE, LEVEL AND CURVATURE, JOINTED WITH CEMENT MORTAR 1:3 (1 CEMENT: 3 COARSE SAND), INCLUDING MAKING JOINTS WITH OR WITHOUT GROOVES (THICKNESS OF JOINTS EXCEPT AT SHARP CURVE SHALL NOT TO MORE THAN 5MM), INCLUDING MAKING DRAINAGE OPENING WHEREVER REQUIRED COMPLETE ETC. AS PER DIRECTION OF ENGINEER-IN-CHARGE (LENGTH OF FINISHED KERB EDGING SHALL BE MEASURED FOR PAYMENT). (PRECAST C.C. KERB STONE SHALL BE APPROVED BY AS PER DIRECTION OF OFFICER IN CHARGE.)
1
-
-
BRICK WORK WITH COMMON BURNT CLAY F.P.S. (NON-MODULAR) BRICKS OF CLASS DESIGNATION 7.5 IN FOUNDATION AND PLINTH IN. (A) CEMENT MORTAR 1:6 (1 CEMENT : 6 COARSE SAND). (AS PER DIRECTION OF OFFICER IN CHARGE.)
1
-
-
REPAIRS TO PLASTER OF THICKNESS 12 MM TO 20 MM IN PATCHES OF AREA 2.5 SQ METERS AND UNDER, INCLUDING CUTTING THE PATCH IN PROPER SHAPE, RAKING OUT JOINTS AND PREPARING AND PLASTERING THE SURFACE OF WALLS COMPLETE WITH CEMENT MORTAR 1:4 (1 CEMENT : 4 FINE SAND), INCLUDING DISPOSAL OF RUBBISH INTO DUMPING GROUND, ALL COMPLETE. (AS PER DIRECTION OF OFFICER IN CHARGE.)
1
-
-
SPREADING OF SLUDGE, DUMP MANURE AND/OR GOOD EARTH IN REQUIRED THICKNESS AS PER DIRECTION OF OFFICER-IN-CHARGE (COST OF SLUDGE, DUMP MANURE AND/ OR GOOD EARTH TO BE PAID SEPARATELY).
1
-
-
SUPPLYING AND STACKING OF GOOD EARTH AT SITE INCLUDING ROYALTY AND CARRIAGE UPTO 5 KM LEAD COMPLETE.
1
-
-
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge 16.70.2 Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade
1
-
-
PROVIDING AND FIXING CONCERTINA COIL FENCING WITH PUNCHED TAPE CONCERTINA COIL 600 MM DIA 10 METRE OPENABLE LENGTH ( TOTAL LENGTH 90 M), HAVING 50 NOS ROUNDS PER 6 METRE LENGTH, UPTO 3 M HEIGHT OF WALL WITH EXISTING ANGLE IRON 'Y' SHAPED PLACED 2.4 M OR 3.00 M APART AND WITH 9 HORIZONTAL R.B.T. REINFORCED BARBED WIRE, STUD TIED WITH G.I. STAPLES AND G.I. CLIPS TO RETAIN HORIZONTAL, INCLUDING NECESSARY BOLTS OR G.I. BARBED WIRE TIED TO ANGLE IRON, ALL COMPLETE AS PER DIRECTION OF ENGINEER-IN-CHARGE, WITH REINFORCED BARBED TAPE(R.B.T.) / SPRING CORE (2.5MM THICK) WIRE OF HIGH TENSILE STRENGTH OF 165 KG/ SQ.MM WITH TAPE (0.52 MM THICK) AND WEIGHT 43.478 GM/ METRE (COST OF M.S. ANGLE, C.C. BLOCKS SHALL BE PAID SEPARATELY)
1
-
-
FABRICATION OF STRUCTURAL STEEL WORK RIVETED, BOLTED OR WELDED IN BUILT UP SECTIONS, TRUSSES AND FRAMED WORK, INCLUDING CUTTING, HOISTING, FIXING IN POSITION AND APPLYING A PRIMING COAT OF APPROVED STEEL PRIMER ALL COMPLETE. Y SHAPE STEEL SECTION WITH 50X50X5 ANGLE
1
-
-
Roll sub-grade with vibratory roller. Any soft spots identified during proof rolling shall be removed and replaced with compacted suitable fill material to the satisfaction of the Consultant /agronomist /engineer, so that a firm formation with a CBR value of greater than 5% is produced.
1
-
-
Picking of stones removal or other deleterious material of dimension greater than 75mm from the surface of the sub-base.
1
-
-
Providing, laying and spreading upto 50 mm, aggregate of 10-15 mm.
1
-
-
Providing and laying 100mm corrugated perforated pipes with fixing all end caps, T joints and couplers where necessary.
1
-
-
Supply and fit Couplers to 100mm pipe.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements