Municipal Corporation Tender

(b) 3X4 Sq mm

(c) 6 X 4 sq. mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface / recessed including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. (b) 25 mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a)5/6 A switch

b)3 pin 5/6 A socket outlet

C) Bell push

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supply of 9 Watt LED retrofit lamp suitable for B22 holder

SITC of 8 to 10W LED cone type bollard light made up of pressure die cast powder coated housing with Polycarbonate diffuser, high efficiency long life, surge voltage, over voltage protection, open circuit, short circuit protection and other safety test as per IS 15885 part-2 etc as reqd.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplersetc. conforming to IS 14930, Part II complete with fitting andcutting, jointing etc..direct in ground (75 cm below ground level)including excavation and refilling the trench but excluding sandcushioning and protective covering etc., complete as required.(a) 63 mm dia (OD-63 mm & ID-51 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 12 way,Double Door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connectionstesting and commissioning etc. as required., a) single pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. b) 63 amps

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but withoutcharcoal/ coke and salt) as required.

P&F 6 SWG dia G.I. wire on surface or in recess for loop earthing as reqd.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall as surface required. Upto 35 sq. mm

Supply & fixing of 20 amp,240 volt SPN Industrial type socket outlet with 2 pole and earth, metal enclosed plug top along with 20 amp C series SP, MCB in sheet steel enclosure, on surface or in recess with channel metal cover for the socket out let complete with connection ,testing & commissioning etc as required.

S/I/T/C of LED Tube type luminaire 20 Watt rating complete with Extruded Aluminium Batten prewired with high efficient LEDs with the following: Total system wattage 20 watt +/- 5% Luminous efficacy lumens/watt =95 Power Factor =0.95

Supplying and fixing of 32 mm dia x 1.00 meter long G. I. pipe (medium class) bracket for mounting of Fluorescent/HPMV/HPSV street light fitting on pole i/c bending the pipe to the required shape, 2 nos. 25mmx6mm flat iron clamps with nuts, bolts and washers, painting the flat iron with primer and finish paint etc as required.

Supply of 70 Watt LED street light luminare fitted with lense made of pressure die cast Aluminium housing and toughned glass cover complete with following specifications as per relevent IS (a) Total system wattage =70 watt + 5 % (b) luminous efficacy -130 lumens/watt (minium) (c) Power factor = 0.95 (d) Protection class - IP 66 (e) LED package shall be ceramic base (f) Multi chip, Array Multi die, Mid power, integrated arrays and COB type chip are not permitted (g) Operating current LED 70% of rated maximum forward current limited to a minimum of 350 mA and maximum of 1000 mA. (h) Wattage of LED package : One watt to Five watt maximum (i) CRI 70 (j) THD 10% for complete fixture (k) operating Voltage -110-320 V 50 HZ +/- 3% (l) The driver must have thermal protection against 75 Deg C ambient temperature with internal SPD of minimum 6 KV separate compartment for driver (m) Life of street :- Minimum 50,000 Hrs

Supply of XLPE insulated and PVC sheathed Al conductor un-armoured cable of 1.1KV grade conforming to IS 7098 of following size:- (a) 2x6 sqmm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 1.5 sq. mm

P & F of hot press moulded compound (SMC) fire retardent ( temperature resiistanceup to 200 C) IP -55 weather proof pole box of size inner dimenson 200X 1160X98 mm (NS) complete with the suitable arrangement for fixing of 02 nos of 6 to 32 amp single pole MCB & 63 amp double pole isolators MCB ( MCB and isolator excluded) with neutral link duly shorting on DIN channel with 02 nos of MS clamp with SS black plate of suitable size with danger monogramme properly printed on the cover etc. as required.

Supply of size 48"(1200mm) 50 watt energy saver ISI mark BEE 5 star rating AC ceiling fans suitable for 230 volt 50 Hz AC supply complete with down rod of standard length (30 cm) canopy, blades without regulator

Supply of 15" (380mm) sweep 1400 rpm exhaust fan heavy duty complete with shutters blades etc as reqd

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Extra for fixing the louvers/shutters complete with frame for a exhaust fan of all sizes