Municipal Corporation Tender

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal)size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Supply of PVC insulated and PVC Sheathed XLPE conductor armoured cables conforming to IS1554 /7098 as required. 2x6sqmm

SandD following sizes of FRLS PVC insulated copper conductor,S/C cable in the existying surface/recessed steel/pvc conduit as reqd. 2x1.5

SITC of 70/72 watt LED street light luminare fitted with lens top opening driver cover made of pressure die cast aluminium housing & toughned glass cover complete with the following specification ad required with IP 66 protection .a)      LED wattage 70/ 72+5%, b)       Luminaries efficacy 100 lumens/watt, c)      Pf. 0.95, d)      Protection – IP 66

Fabrication,supply, & ercetion of following size flange mounted hot dip galvanized octagonal pole made from HT steel plate, window with flash cover with full vertical window cover at appropriate height from the base plate on existing cement concrete pedestal as required i/c supplying and fixing of 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. GI strips 4mm thick of suitable length and having suitable size tapped holes as required, terminal block suitable for 25 sqmm conductor - 4 nos. & & shorting links on DIN channel i/cpdg and fixing DIN channel of suitable length , 6 amp SPMCB 'C' characteristics, earth stud , cable support clamp suitable for upto 4x25 sqmm cable. Logo/name of manufacturer shall be embossed on the pole . Galvanization as per relevant IS. 7 Mtr. height, not less than 3mm thick,bottom diaof 130mm & top of 70 mm base plate of size 225x225x12mm thick.

Providing and laying in position M 25 grade reinforced cement concrete foundation of size 600 mm (L) x 600 mm wide and 1200 mm deep i/c excavation of earth, proividing cutting, bending and placing in position , reinforcement of cold twisted bars of 12 mm dia - 1160 mm long (approx.) - 8 nos. and reinforcement of cold twisted bars of 8 mm dia -1600 mm (approx) - 8 nos. (with 150 mm spacing) as required with supplying and positioning of 4 nos. foundation bolts 20 mm dia., 750 mm long J type i/c 2 nos. template anchor plates of size 225 mmx225 mm x3mm and providing DCW HDPE pipe for cable entry and exit as required for 7m pole.

Fabrication and supplying ,fixing Galvanized single overhang arm bracket made out of 250 mm long galvanized top tube with cap and 1000 mm long 32 mm dia galvanized pipe with tightening bolts complete as required.

Supply and fixing of 32mm dia G.I.Pipe(Medium Class) 1 Mt.long bracket i/c wiring with 2.5 sq.mm copper conductor wire as reqd.

Wiring for sub main with 6 sqmm size of WP twin core Al.conductor cable as reqd.

SITC of 30 W LED Flood Light luminiare fitted with lense, made of pressure die cast aluminium housing & toughned glass cover complete with the following specification as reqd. (b) Total system wattage =30 watt +/- 5% (d) Luminaire Efficacy=100 Lm/w (e) Power Factor=0.95 (f) Protection Class- IP-66