Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair Upgradation Of Awwa Women Hostel At Shankar Vihar Delhi Cantt As Deposit Work in New Delhi, Delhi, with an estimated contract value of Rs. 11,45,00,000. The bid opening date for this tender is 30-04-2025 and the last date for bid submission is 11-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is Class 'S' and above.
Technical Capacity
... View More
The bidder is required to have prior work experience of a similar nature of works executed during the last five years. They should provide details of three highest valued similar nature of works in a tabular form. No specific value or percentage of similar works completed is mentioned. However, for contractors one class below the eligible class, the present residual work in hand should not be more than five times their present tendering limit. In terms of specific values, the performance security deposit is 5% of the contract sum. For MES enlisted contractors, the required prior work experience is not explicitly stated in terms of specific years or amount, but they should have satisfactory remarks regarding performance. For contractors not enlisted with MES, they should meet the enlistment criteria of 'S' class MES contractors, which includes satisfactory completion of requisite value of works, but specific values or percentages are not mentioned. For un-enlisted contractors, if the total value of works being executed is more than twice the tendering limit of the MES Class of Contractor for which it is eligible, they shall not be considered eligible for the subject tender.
Costs
EMD
₹ 8,97,500Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_706026_1Tender No
CEDZ/TOKEN-12 OF 2025Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Area exceeding 1.00 sqm but not exceeding 2.00 sqm each
710
-
-
... More
S&F solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
600
-
-
... More
S&F in repair 15mm brass CP Bib taps,Fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed by Engr-In-Charge
2
-
-
... More
S&f in reairs 15 mm Stop angle valves, fancy typecast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
274
-
-
... More
Supplying and providing non matallic composite corbon fiber low Modulas Precured CFRP Strip of 100mm wide and 1.4mm thick including surface preparation by Grinding/ moulding concrete, cleaning it with wire brush, removing oil, laitance etc.
4325
-
-
... More
Dismantling water tanks and removing to store n exc 500 Ltr cap
10
-
-
... More
S&F in repair SS soap dish all as per specified and directed.
51
-
-
... More
S&F in repair 15mm Brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed by Engr-In-Charge
2
-
-
... More
S&F 250 mm long SS Sliding door bolt for WPC door all as specified and directed.
370
-
-
... More
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165size for fixing and operation of handles and fixing approved uPVC standard section around the opening, all complete as per requirement and direction of Engineerin- charge.
9000
-
-
... More
M&L for preparation of complete removal plastered surface on ceiling and applying two coats of oil bond distemper with Graco spray machine over a coat of primer over a coat of 1mm thick wall care putty complete all as specified and directed. Make Asian or equivalent
4534
-
-
... More
Supplying and providing non metallic composite carbon fiber wrapping system comprising of unidirectional fiber sheet 400 GSM and compatible saturant,including surface preparation by grinding/moulding concrete, cleaning it with wire brush, removing oil,laitance etc.If present, rounding shape edges to min 25 mm,radius etc,with approved putty etc, complete wrapping the fibre sheet by tamping to avoid any air voids etc, The same procedure shall be adopted for multiple layers within an interval of 8 Hrs between consecutive layers,rectifying air voids if any, pastiing the river sand on it to make surface rought to add any further finishes. Overlaps and wastage will not be paid. Complete as per approved design & drawings and the direction of Engineer-in-Charge. The scope of work in the item includes: 1. The item includes the cost of all operations involved to complete the job as per the specifications and conditions of contract including the cost of arrangement of all material, machinery, Tools & Plant manpower of all categories as per the directions of the Engineer-in-Charge. 2. The item includes the cost of testing of all materials involved in the execution of the item as per the requirement given in the tender documents. 3. The item includes all other incidental expenditures for completing the job as per directions of the Engineer-in-Charge.
100
-
-
... More
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.
150
-
-
... More
Brick work with common burnt clay (non modular) bricks built in cement mortar 1:4 (1 cement : 4 coarse sand) complete all as specified and as directed by Engineer-in-Charge.
288
-
-
... More
Area n exceeding 1.00 sqm
62
-
-
... More
M&L Cement concrete tiles(Heat resistance) 30cm x 30cm x 25mm thick, machine pressed, glossy finished; set jointed and pointed in neat cement slurry in floors, and cut and polished inclding Screed bed or bedding layer of mortar 20 mm thick in CM (1:4) for laying floor finishes all as specified and directed by Engr-In-Charge.
1505
-
-
... More
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sq m each, all as specified.
651
-
-
... More
M&L Cutting chases on brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth
400
-
-
... More
Shear Key,providing and fixing of L/U shaped 150mm long, 8mm dia mild steel shear key after drilling suitable hole in reinforced or plain cument concrete with power driven drill machine to a minimum depth of 100mm, upto 200mm in RCC beams, columns and slabs to intorduce steel bars including fixing the steel bars in position using, epoxy resin anchor grout of approved make but excluding the cost of reinforcement, complete all as per direction of Engineer-in-Charge.
2366
-
-
... More
Dismantling of 100mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches,/wall cleaning and refixing in same opening
75
-
-
... More
S&f Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers all as specified and directed by Engr-In-Charge.
480
-
-
... More
M & L Cement concrete type B-2, 1:2:4 ( Using 40 mm gradeed stone aggregate) in filling and mass including demolition of cement concrete for cutting of road crossing, PCC hard standing for laying of pipe line / cable including making good with complete all as specified and directed by Engr-in-Charge.
0.5
-
-
... More
M&L preparation decorated plastered surface with one coat of white putty and applying one coats with Graco-490 spray machine, of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr after cleaning and removing dirt dust oil grease smog efflorescence stain, thoroughly brushing the surface and removal of existing paint flakes, to obtain an even surface ,necessary tools and machinery to give an even shade up to G+2 story building. Application to be done only by applicator authorised by manufacturer, also shall be approved by GE before starting of work.
4100
-
-
... More
Providing and applying 15mm thick smooth plaster with 1:4 CM at any level upto (G+3) incl, cleaning of surface, curing, scaffolding, mixing etc complete with all tools.
2258
-
-
... More
Cement slurry grouting with cebex 100(Fosroc chemical compound) with cement 50Kg, water 50Ltrs and 100gm of cebex 100.Cementous grouting injection to be done with recommended pressure with the help of required manual/mechanically grouting pump.
20000
-
-
... More
Chipping of unsound/weak concrete/ plaster material upto 25mm average thickness from slabs, beams, coloums, wall etc with manual chiesel and/ or standard power driven percession type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc and disposal of debris for all lead and lifts all complete as per direction of Engineer-in-Charge
2258
-
-
... More
Material and labour removing/taking down old plaster surfaces by grinding/moulding concrete,cleaning it with wire brush, removing oil,laitance and preparation old surface(washing ) and apply spraying of mixture of concrete or mortar over a layer of MS wire mess shotcreting complete job as per manufacture specification and directed of the Engr-In-Charge.
500
-
-
... More
STRUCTURE REPAIR
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia M.S tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S tubbe, M.S Challies, M. S. clamps and M.S. Staircase system in the scaffolding for working platform etc and maintaining it in servicable condition for the required duration as approved and removing it there after, the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scafolding
7756
-
-
... More
S&F in repair 10 Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets all as specified and directed by Engr-In-Charge
68
-
-
... More
Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) including any sunk or raised moulding
1230
-
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows cup board & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws
having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives
(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
150
-
-
... More
S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I
2
-
-
... More
S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I
18
-
-
... More
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.
712
-
-
... More
Dismantling of stone slab and tiles of any description or thickness in foor, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.
62
-
-
... More
M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thic screed bed in CM(1:3)complete all as secified and directed by Engr-In-Charge. all as specified and directed.
70
-
-
... More
S&F in repair looking mirror 5 to 6mm thick beveled edge including side cover with decorative PVC beading all as specified and directed by Engr-In-Charge.
44
-
-
... More
S&F in repairs, SFRC manhole cover size 600mm X 1200 mm x70mm thick with MS frame set in cement mortar 1:4 complete all as specified and as directed. (i) Make of SFRC Manhole/drain cover:- (a) M/s PS Concrete.
(b) M/s KK Manhole.
(c) BRHL Concrete Industries.
20
-
-
... More
Providing, mixing and apllying SBR polymer(of appprove make ) modified cement mortar in proportion of 1:4 (1 cement ratio 4 graded coarse sand with polymer min 2% by wt of cement used) as per specification and direction of Engineer-In-Charge.
Note: Mesuarement and payment : the pre measurement of thickness shall be done only after proper wet curing has been done surface has been done satisfactorily evluated by sounding/tapping up to 25mm (make Fosroc,Sika,Basf
2325
-
-
... More
M&L for 75 mm thick cement concrete 1:3:6, type C-2, using 40 mm graded stone aggregate as in plinth protections, to be finished even and smooth without using extra cement including demolition of PCC complete including use of necessary form work complete all as specified and as directed.
340
-
-
... More
M&L Cement concrete tiles 30cm x 30cm x 25mm thick, machine pressed, glossy finished; set jointed and pointed in neat cement slurry in floors, and cut and polished laid over and including Screed bed or bedding layer of mortar 20 mm thick in CM (1:4) for laying floor finishes
350
-
-
... More
Provinding & Fixing adequate and leak proof plain shuttering for sides & bottom of R.C.C. element at any level including necessary scaffolding & prop of required height
200
-
-
... More
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as specified and directed by Engr-In-Charge.
40
-
-
... More
S&f in reairs 15mm Stop valves, fancy type cast copper alloy,(concelled ) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
51
-
-
... More
S&F in repair 15m brass CP bib tap (two way) all as specified and directed by Engr-In-Charge
68
-
-
... More
Drilling of holes of required size and fixing perforated PVC complete@ upto 5 mtr and making the injection sleeves in position or as per requirement of site 1.0 Mtr C/C as per site requirement.
1000
-
-
... More
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50X100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
490
-
-
... More
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store
400
-
-
... More
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50X125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
1350
-
-
... More
S&F factory made single extruded WPC (Wood Polymer Composite) solid plain gauzed/skeltan shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
310
-
-
... More
M&L RCC Beams(design mix m-25), cantilevers, bressummers, lintels over 1.5m span
2.52
-
-
... More
M&L for preparation undecorated plastered surface on wall and applying two coats of oil bond distemper with Graco spray machine over a coat of primer over a coat of 1mm thick wall care putty complete all as specified and directed. Make Asian or equivalent
300
-
-
... More
Area exceeding 2.00 sqm each
16
-
-
... More
S&F 150 mm long SS Tower bolt for WPC door all as specified and directed.
1034
-
-
... More
S&F18mm thick WPC board(View cutter) fix with MS frame with self tapping screw all as specified and directed by Engr-in-Charge.(Note MS work paid separately at item no-51)
102
-
-
... More
Micro concrete (Pre-Packed) wherever cover reinstatment is more than 60mm thick provinding and laying non-shrink/ shrinkage componented cement based prepacked single compnent Micro-convrete, ehlorode free sulphate free, free flow, self-compacting, ready to use after mixing water in specified proportion of approved quality. Rate shall be included with new playwood shuttering board post and supporting jack system/ provn to support the shuttering plate, shuttering plate will be used in patch seepage job as shuttering item will be included in this application of High strength dual shrinkage componented micro concrete for placing in nominal thickness of 25mm to 200mm for convrete repair with compressive strength similier to strength of substrate concrete) of micro concrete cubes equivalant to that of M25/M30/M35 grade at 28 days age.
9
-
-
... More
S&F 100mm long SS hinges for WPC door all as specified and directed
1404
-
-
... More
M&L preparation new surface of APP membrane and apply two coats of aluminium paint all as specified and directed by Engr-In-Charge.
1195
-
-
... More
Dismantling boarding, any description, fixed in any position with nails
2012
-
-
... More
S&F in repair 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed by Engr-In-Charge
51
-
-
... More
M&L for rendering 5mm thick cement plaster in CM(1:4) with waterproofing compound over 10mm thick in CM (1:6) finished even and smooth with out using extra cement up to G+2Building Including scaffolding complete all as specified and directed By Engr-In-Charge.
4100
-
-
... More
S&F Sheet glass, ordinary quality and glazing with glazing clip in square n exc 0.5 sq. m in each pane of 4.8 mm thickness all as specified and directed.
430
-
-
... More
Providing and Applying water proofing coating system over horizontal and vertical surface on roof by carying out : 1) Single coat of efflorescence resistance penetrating primer (Primeseal of Dr. fixit or equivalnet ) over cleaned roof surface to provide priming surface.
2) Single coat of heavy duty reinforced trafficable water proofing coating compound (New Coat of Dr. fixit or equivalent) over priming surface to give base course, 3) 45 gsm glass fiber mesh evenly over the base course to make the waterpoorfing system foot trafficable 4) Two coats of heavy duty reinforced trafficable water proofing coating compound (New Coat of Dr. fixit or equivalent) over fiber mesh to give wearing/ finished course. The cost of this work includes cost of providing and applying of priming coat, fiber mesh and 3 coats of water proofing compound including finishes, Air curing,07 days ponding, etc. Complete as per manufacturer's specification and instruction of the Engineer-in-charge.
1010
-
-
... More
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
240
-
-
... More
Providing laying and fixing in position steel rebars of following sizes in reinforced concrete work, including removal of loose concrete by wire brush, drilling hole of required size, laying in position using epoxy at all levels and heights but excluding the cost of reinforcement as per drawing and design, manufacture's specifications complete all as per site requirement and as directed by Engineer-in-Charge
-
-
-
... More
PU grouting injestion to be done by fixing the required packers at drill hole at site as per requirement and injection with PU through the fixed packers with recommended pressure(max 10Kg) with the help of required mechanically grouting pump.
750
-
-
... More
S&F 100mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors
20
-
-
... More
Domolishing brick work manually/ by mechanical means including stacking of servicable material and disposal of unserviceable meterial within 1 Kilometres lead as per direction of Engineer-in-Charge.
28
-
-
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Therom-Mechanically Treated bars of grade FE-500D or more all complete as per direction of Engineer-in-Charge
1152
-
-
... More
Providing and fixing factory made uPVC white colour fixed window/ventilator made of extruded profiles with wall thickness of 2.3mm(+ 0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.)
-
-
-
... More
Providing and laying of perforated PVC pipes 52mm dia upto 5 Mtr depth, for pressure grouting of cement slurry/Polyurethane
1000
-
-
... More
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)
40
-
-
... More
S&F 300mm long SWR PVC connections and fixed with CPVC / GI pipe /fittings complete all as secified and directed by Engr-In-Charge.
103
-
-
... More
Demolition of cement concrete (reinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) including removal of debrish out Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed of MoD Land complete all as specified and as directed.
60.48
-
-
... More
M&L Glazed ceramic coloured tiles in vertical surface 300x 600x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including backing plaster 10mm thick in CM (1:3) complete all as secified and directed by Engr-In-Charge.
2100
-
-
... More
S&F18mm thick WPC board fix with WPC frame with self tapping screw all as specified and directed by Engr-in-Charge.(Note Aluminium work paid separately )
80
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
7565
-
-
... More
M&L preparation of undecorated plastered/concrete surface and applying three coat of white wash on wall complete all as specified and directed by Engr-In-Charge.
40
-
-
... More
S&f in repair Wash hand basins oval type (550x450mm) counter shunk, Vitreous China and all necessary fitting and fix with CPVC/GI fitting all as specified and directed by Engr-In-Charge.
82
-
-
... More
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed by Engr-In-Charge
55
-
-
... More
S&F Flush pipes to pedestal pan, including all joints all as specified and directed by Engr-In-Charge
68
-
-
... More
Providing & laying suitable sprinkling of clean sand particle for protecting the treated surface and holding of finishing plaster/ paint wherever required.
100
-
-
... More
M&L Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed..
350
-
-
... More
S&F 100mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed by Engr-In-Charge.
20
-
-
... More
M&L for rendering 10mm thick cement plaster in CM(1:6) on wall surfaces finished even and smooth with out using extra cement Including scaffolding complete all as specified and directed By Engr-In-Charge.
300
-
-
... More
S&F Virified Ceramic tiles light shade double charge 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM(1:4)complete all as secified and directed by Engr-In-Charge.
4865
-
-
... More
M&L providing,Type B-0 (1:2:4) 12.5mm graded aggregate cement concrete in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed by Engr-In-Charge
162
-
-
... More
S&F APP based polymeric water proofing membrane minimum weighing 3 Kg/sqm and 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm laid over and including applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm by torch application including cleaning of surface complete all as per approved manufacturer's instructions. complete all as specified and directed by Engineer-in-Charge.
Note:-The water proofing treatment shall be carried out by manufacturer or their auth applicators as per manufactures instruction and as directed by Engr in Charge.
2700
-
-
... More
S&F 20mm Ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed all as specified and directed.
20
-
-
... More
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips
4224.99
-
-
... More
All as per item No. 34 above but 5mm dia TMT and over upto and including 10mm dia in stirrups, spacers and binders
147.89
-
-
... More
S&F in repair Fancy type brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed by Engr-In-Charge
51
-
-
... More
S&F in repair SS toilet paper holder all as per specified and directed.
68
-
-
... More
Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other fittings and connected accessories. Net opening will be measured for payment purpose.)
-
-
-
... More
S&F PVC connections 15mm size with PTMT nuts of length 450mm and fixed with CPVC / GI pipe /fittings complete all as secified and directed by Engr-In-Charge.
10
-
-
... More
M&L Non skid coloured Ceramic tiles 7 to 8 mm thick joint free (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM(1:4)complete all as secified and directed by Engr-In-Charge.
600
-
-
... More
S&f Supplying and laying of 16mm CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
400
-
-
... More
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from
soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre reinforced with GI wire mesh.
1230
-
-
... More
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
1230
-
-
... More
M&L for complete removal, preparation of plastered surface on wall and applying two coats of oil bond distemper with Graco spray machine over a coat of primer over a coat of 1mm thick wall care putty complete all as specified and directed. Make Asian or equivalent
11780
-
-
... More
M&L for dismantling of floor of size not exceeding 1.50 Sqm mtr for water closet/bath and removing out the cinder/concrete from sunken portion, , grinding any sharp edges etc all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.
(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.
(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.
(d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall.
(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.
(f) The area of Each WC portion is n.exc 1.50 Sqm each.
(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.
(h) 72 hrs Ponding test shall be carried out for sunken treatment before payment.
13
-
-
... More
S&F in repair SS towel ring all as per specified and directed
133
-
-
... More
Providing and applying concrete penetrating corrosion inhibitor "CPCI" over the entire surface @ approx 4 sqm/ lt and minimum Ph of 9.5, all complete all as per direction of Engineer-in-Charge.Surface area of concrete shall be measured for payment.
2258
-
-
... More
Sealing of crack/ porous member with epoxy grouting by injection through inserting nipples procedure with epoxy injection Gun complete as per directions of Engineer-in-Charge.
3161
-
-
... More
M&L cement concrete in foundations, filling and mass Cement concrete type D-2, 1:4:8 (40mm graded aggregate) complete all as secified and directed by Engr-In-Charge.
18.42
-
-
... More
M&L for rendering 5mm thick cement plaster in CM(1:3) on ceiling surfaces finished even and smooth with out using extra cement Including scaffolding complete all as specified and directed By Engr-In-Charge.
805
-
-
... More
Dismantling water tanks and removing to store exc 500 ltr but n exc 1000 Ltr cap
10
-
-
... More
S&F machine pressed precast concrete interlocking paver block glossy finish any shape and size,with grey cement and pigment to match, confirming to IS 15658-2006 of 60mm thick M-35 grade laid over sand cushioning complete all as specified and as directed.
200
-
-
... More
S&F 150 mm long SS handle for WPC door all as specified and directed.
936
-
-
... More
Dismantling of brick/PCC tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar.
2700
-
-
... More
S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed by Engr-In-Charge.
20
-
-
... More
S&F Providing 35mm thick FACTORY MADE B/S PRELAM WIRE MESH SOLID WPC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15mm x 15mm for top, lock & bottom rails. M.S. frame shall have a coat of metal primer of approved make and manufacturer. 19mm x 19mm M.S. square tubes shall be covered with heat moulded Prelam sheet 'C' channel made from 5mm (±0.25) thick PVC Sheet of Density 600 Kg /Cum Manufactured by an ISO-9001-2015 certified Company, of size 35mm thickness, 115mm width out of which 100mm shall be flat and 15mm shall be bent in 90° angle on either side forming stiles,one of the 90° bend edge is cut from stiles as well as rails to nail from inner side of door to hide wire mesh fixing steel screws. 5mm (±0.25) thick 140mm wide PVC sheet out of which 125mm shall be flat and 15mm shall be bent in 90° on the inner side to form top and bottom rail and 155 mm wide PVC sheet out of which 100 mm shall be flat and 15mm shall be bent in 90° on both side to form lock rail. An additional 5mm (±0.25) thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive. Panel will be of GI /SS wire mesh of 24 gauge to be fitted inside area of stiles & rails. The wire mesh in top, bottom & lock rail is sealed with 15mm x15mm tube with steel screw of size 13/6 mm.10mm (5mm x 2nos) thick PVC strip of 25mm width is to be stuck & nails on both side of G.I. wire mesh interior at the top, bottom & lock rail. 10mm thick (5mm x 2nos) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardware’s should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.
310
-
-
... More
Area exceeding 2.00 sqm each
3
-
-
... More
S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
140
-
-
... More
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store
250
-
-
... More
Supplying and laying of 20mm CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
250
-
-
... More
M&L RCC Slabs (design mix M-25) supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
39.6
-
-
... More
Providing, mixing and applying apoxy bonding cost of approved adheslve on chipped portion of plaster as per manufacturers specifications and direction of Enginee-In-Charge complete in all respects including carriage of materials in all leads and lifts.
2325
-
-
... More
S&F in repair Water closet (Squatt pattern) ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding, Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor
13
-
-
... More
S&F 75mm Cast iron Nanhi/multi floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-In-Charge.
50
-
-
... More
M&L for 75 mm thick cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate as in sub base, to be finished even and fair complete including demolition and use of necessary form work complete all as specified and as directed.
200
-
-
... More
M&L preparation of undecorated new steel Surfaces and apply two coat of synthetic enamel paint over a coat of red oxide zinc crome of any description, over 10cm in width or girth complete all as specified and directed by Engineer-in-Charge.
900
-
-
... More
M&L 25 mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as secified and directed by Engr-In-Charge.
800
-
-
... More
Material supply onlyLiquid water proofing compound
413
-
-
... More
M&L for preparation undecorated plastered surface on ceiling and applying two coats of oil bond distemper with Graco spray machine over a coat of primer over a coat of 1mm thick wall care putty complete all as specified and directed. Make Asian or equivalent
805
-
-
... More
Sacrifical anode cathodic protection (SACP) for distressed RCC mambers provide and install sacrificial zinc anodes to prevent initiation of corrosing of steel reinforcement in chlorideconteminated or corbonated concrete
3387
-
-
... More
Demolition of mud in roof, any thickness, including plastering,membrane and leeping upto three storey bldg incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or as directed by Engr in Charge.
540
-
-
... More
S&F 100mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed to wall
55
-
-
... More
Disposal of moorum/ building rubbish/malbar/similar unserviceable, dismantled or waste material by mecanical transport including loading, transporting unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-Charge
280
-
-
... More
S&F 50mm Magnatic catches complete and fixed all as specified and directed by Engr-In-Charge.
40
-
-
... More
S&F PVC connections 15mm size with PTMT nuts of length 300mm and fixed with CPVC / GI pipe /fittings complete all as secified and directed by Engr-In-Charge.
171
-
-
... More
Sand filling under floors or in foundations/ under paver block including watering and consolidation and Spreading and levelling in layers 25 cm thick.
200
-
-
... More
Providing, mixing and applying over reinforcement bars zinc anti rust agent as per specification and direction of Engineer-in-Charge (Dosage/ coverage as per the recommendation of manufacturer). Surface area of concrete shall be measured for payment.
2258
-
-
... More
S&F in repair 20mm SS towel rail 600 mm long rail all as per specified and directed.
51
-
-
... More
M&L cement concrete type B0 (1:2:4) 12.5mm graded aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
1.13
-
-
... More
Provindig and inserting grouting GI nipple 30mm to 40mm depth or half the thickness of the member which ever is less into honeycombed concrete/ normal concrete including drilling of holes, inserting nipples and sealing the gap around nipples with epoxy putty etc complete as per direction of Engineer-in-Charge
9031
-
-
... More
M&L for complete removal of existing loose treatment by scraping with mechanical grinder from wall/ceiling by vacuum based sanding machine (wall sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 ich/ 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology/auto roller
16314
-
-
... More
S&F in repair SS curtain rod 20mm dia grade S.304, wall thickness 1.65mm complete all as specified and directed by Engr-In-Charge.
700
-
-
... More
Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by engineer-in-charge.
4965
-
-
... More
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sq m but n. exc 4 sqm each, all as specified.
295
-
-
... More
M&L Cement concrete in surface channels and drains type B0 (1:2:4) 12.5mm graded aggregate all as specified and directed
0.14
-
-
... More
Making arrangement for cutting core of 75 mm dia and depth of 200 mm (200mm deep reinforced concrete slab) by mechanical means and sealing the core after pourning the microconcrete for repair of slab, all as per the direction of the Engineer-in-Charge.
280
-
-
... More
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
68
-
-
... More
16 MM Dia
200
-
-
... More
S&F 75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-In-Carge.
100
-
-
... More
12 MM Dia
450
-
-
... More
S&F Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane of 4.8 mm thickness all as specified and directed.
50
-
-
... More
S&F CP( brass) Hat pegs, solid body,125mm to 175 mm
98
-
-
... More
S&f in repair brass chromium plated 15mm dia central hole mixer for Wash hand basins, fitting comlete with CPVC/GI fitting all as specified and directed by Engr-In-Charge.
82
-
-
... More
M&L for 15mm thick rendering with CM (1:4) on faces of brick or concrete wall surface, finished even and smooth waith out using extra cement complete all as specified and as directed.
40
-
-
... More
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
410
-
-
... More
Area exceeding 1.00 sqm but not exceeding 2.00 sqm each
4
-
-
... More
Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work
42.12
-
-
... More
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.
22.8
-
-
... More
S&F in repair jet spray (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube including making connections and fixed in position complete in all respect as specified.
51
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%