Military Engineer Services Tender

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed by Engr In Charge.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed by Engr In Charge.

S&F fabricating coloured powder coated aluminium frame work,door shutter ,windows , ventilators, partitions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.

Providing and fixing factory made uPVC white colour casement (openable) Door made of extruded profiles with wall thickness of 2.3mm (+/0.2mm). Window profile with hollow section with multi chamber, frame (60mmx58mm), sash (60mmx78mm),T profile (One vertical length in between two shutters) (60mmx74mm) Glazing bead(35mmx20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drianage of water etc. making arrangement for fixing of hardware EPDM gasket 1.2 + -0.2 mm thick galvanised steel frame (28mmx21.5mm) sash (31mmx27.5mm) 'T' profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fastners. Hardware : [ casement handle made of zinc alloyed (white powder coated) Butt hinges of zinc alloyed (white powder coated) transmission gear made of mild steel with multi point locking system) and 5mm thick glazing with selected quality glass. (Note : The unit rate quoated by contractor excluding cost of 5.5mm glass and including cuttings, grooves etc. (d) membrane bonded completely to the substrate & the over laps are them sealed/fused complete all as specified and directed.

Providing and fixing factory made uPVC white colour sliding window. three track made of extruded profiles with wall thickness of 2.3mm (+/0.2mm). Window profile with hollow section with multi chamber, frame (88mmx52mm), sliding sash (42mmx67mm), sliding mesh sash (42mm x 57 mm) sliding interlock (One vertical length in each shutters) (45.5mmx28mm) Glazing bead(24.5mm x 16mm ) will be mitered cut and fusion welded at all corners, including railing of holes for fixing hardware and drianage of water etc. making arrangement for fixing of hardware EPDM gasket 1.2 + 0.2 mm thick galvanised steel frame (30mmx18 mm) 2 Nos , sliding sash (30mmx18 mm), sliding mesh sash (26mm x 10 mm ) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners. Hardware [Touch lock of zinc alloyed (white powder coated) steel roller system stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apreature 1.40mm and required accessories] Note the unit rate quoted by contractor including cost of 5.5mm glass and all other connected accessories. Net opening will be measured for payment purpose) area n. exceeding 2.00 sqm each complete all as specified and directed.

S&F 12mm thick particle board prelaminated on both sides as in panel of door shutters partition wall, work stations including beading etc.complete all as specified and directed by Engr-in-Charge.

S&F Aluminium( extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as directed and specified.

S&F for double action floor spring hydraulically regulated mode lap of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to shutter complete all as specified and directed by Engr-in-Charge.

S&F brass body Mortice lock, vertical type,size 100 mm 4 lever, incl escutche on plate and two No keys fixed complete all as specified and directed by Engr-in-Charge.

S&F 5.5 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition incl necessary cutting / moulding and chamferring of edges for service window/counters complete all as specified and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on Bk surfaces on fair face of brick work and finished even and smooth w/o using extra cement complete all as specified.

M&L for preparation of new plastered surfaces of walls, and applying two coats of 1st quality oil emulsion distemper over a coat of primer incl 3mm thick wall care putty on walls complete all as specified and directed by Engineer-in-Charge.

M & L for rendering 5mm thick on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed by Engr In Charge.

M&L for preparation of new plastered or unplastered surface and applying three coats of white wash on ceiling complete all as specified and directed by engr-in -charge.

M&L for scratch free vitrified ceramic tiles 10mm thick (square or rectangular) polished area of each tile exceeding 0.42 sqm but n. exc 1.00 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

All as per item No 19 above but as in skirting/ dado etc with and including 10mm thick backing coat in cement mortar 1:4 on wall complete all as specified and as directed.

S&F in repair vertical roller blinds made out of nylon cloth of any colour as approved including hanging arrangement rollers etc complete as specified and directed by Engineer in charge.

M &L for PVC profile for wall panelling colour / shade as approved size 250mm wide, 08 mm over all thick with 1 mm wall thickness fixed with screw to mild steel square ( size 20mmx 20mmx 1mm thick) tubler frame work including one coat of red oxide primer, fixed to walls complete all as specified and directed by Engr-in-Charge.

M&L for PVC profile corner beading L/T type for wall panelling, colour/shade matching with wall panelling complete all as specified and directed by Engineer-in-Charge.

Material and labour for false ceilings using GI snap grid system with roll-formed out of hot dip galvanised steel caping (powder coated) main runner 38 x 24 mm , cross Tee 29 x 24 mm and wall angle 24 x 24 mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board , pre painted Gypsum Board 12mm thick in ceiling fixed with screw as Per manufacturers instructions size 595 x 595mmx 4mm thick any texture (Lake and Hill, oceaniccascade or Electra) as approved by GE all as at any height all as specified and as directed by Engr-In-Charge.

M & L for collapsible steel gates, as in repair consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc: as specified erected in position and securing runners with holdfasts and brackets including taking down existing old steel gates complete all as specified and directed.

S&F in repair colour powder coated aluminium deco grills confirming to DG-104 grade all as specified and directed by Engr-In-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as Per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 1.5 sqmm single core PVC insulated, unsheathed FRLS 1100 Volt grade multistranded copper conductor cable drawing through rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete including all acessories concealed wiring in wall and surface of ceiling terminated in and including ms sunken box covered with 3 mm thick laminated top sheet cover along with provn of earth wire PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS, ISI markd copper conductor of size 1.5 sqmm all as specified and directed by Engr-in-Charge. (Note : Cost for cutting chaising and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.) of the following (a) One light point controlled by one switch

All as Per item No 28 above but One C/ fan/Exhaust fan/wall fan point controlled by one switch.

All as Per item No 28 above but for one 3 pin 5 amps socket outlet on independent board.

All as Per item No 28 above but for one 3 pin 5 amps socket outlet on the same board

All as Per item No 28 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor as earth wire.

Supply and fix MCB DB SPN with two pin and earth plug and socket 20 Amps compete with one SP MCB 20 Amps fixed flush in wall including cutting chases in wall for fixing DB and making good the disturbed wall surface to match with existing specification.

S&F switch piano, flush type single pole, one way, 5 Amps, 240 volts all as specified.

S&F switch piano, flush type single pole, one way, 15 Amps, 240 volts all as specified and directed bu Engr-in-Charge.

S&F socket outlet 2 in 1, 3 pin 5 Amps all as specified and directed at Engr-in-Charge.

S&F socket 16 Amps, 2 in 1, flush type all as specified and directed.

Supply and fixing ceiling roses, surface bakelite 65x50mm ,3 terminals 3 phase, PVC/ Polycarbonate, isolated body all as specified and directed.

Taking down C/Fan, Exhaust fan of any size dismantling blades and removing fan and blades to and deposit to MES store after making serviceable Complete all as specified and directed by Engineer-in-Charge.

S&F Exhaust fan steel body AC single 300 mm sweep 230 Volt, 1400 RPM with louver including necessary fixing arrangement for proper fixing in wall as Per site requirement complete all as specified and as directed by Engineer-in-Charge.

S&F ceiling fan heavy duty 1200 mm sweep, 230 Volt including necessary fixing arrangement for proper fixing/hanging as Per site requirement complete all as specified and as directed by Engineer-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copPer conductor cases of suitable size complete.

Supply and fixing in repair LED lights fitting 1x 20W 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copPer conductor cable of suitable size from ceiling rose complete.

M & L in replacement submain wiring with two run of single core 10.0 sqmm PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 10.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified - 2 Runs of 10.0 Sqmm single core and one run of 10.0 sqmm single core cable included PVC conduit will be measured as one unit length.

M & L in replacement submain wiring with two run of 4.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 4.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductordrawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified - 2 Runs of 4.0 Sqmm single core and one run of 4.0 sqmm single core cable included PVC conduit will be measured as one unit length..

Supply and fixing in replacement load line vertical distribution board 'A' frame made out of CRCA sheet,double door, surface mounting TPN 4 way 415 volts 250 Amps rated bus bar and stove enamels dust and vermin proof suitable for FP 'A' frame MCCB of 250 Amps =01 No and MCB for outgoing complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of fixed thermal and fixed magnetic settings, 4 pole MCCB 100 Amps, 50 HZ, 415 volts with rupturing capacity 36 KA complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 volts double door type regal gray horizontal type complete all as specified and as directed by Engineer-in-Charge. Note :- MCB shall be measured and paid seperately.

Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN12 way 230 volts double door type regal gray horizontal type complete all as specified and as directed by Engineer-in-Charge. Note :- MCB shall be measured and paid seperately.

Taking down unserviceable SP/SPN MCBs of any capacities from the existing DBs after disconnecting the electric supply,complete all as specified.

S&F MCB SP 5 to 32 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge.

S&F MCB SP 40 Amps 10 KA, 240 volt 'B' Series all as specified and directed by engineer-in-charge.

S&F MCB SPN 40 Amps 10 KA, 240 volt 50 Hz 'C' Series all as specified and directed by engineer-in-charge.