Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair Maint Of External Water Supply System Incl Repair Replacement Of Unsv Pipe Lines Valves Valves Pit Chamber Various Motor Pump Sets Cleaning Of Sumps And Other Connected Work At Shakurbasti Under Ge North Delhi Cantt10 in New Delhi, Delhi, with an estimated contract value of Rs. 41,00,000. The bid opening date for this tender is 03-11-2026 and the last date for bid submission is 23-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - Delhi Tender
Opening Date3 Nov 2026
Closing Soon23 Nov 2026
Tender Amount₹ 41,00,000
Costs
EMD
₹ 82,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Repair Maint Of External Water Supply System Incl Repair Replacement Of Unsv Pipe Lines Valves Valves Pit Chamber Various Motor Pump Sets Cleaning Of Sumps And Other Connected Work At Shakurbasti Under Ge North Delhi Cantt10
Contact
Tender Id
2026_MES_797059_1Tender No
GE/NORTH-169/2026-27Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Taking up existing CI Pipe water mains incl fittings and relaying, jointing and testing of same in to trenches in position after cleaning and removal of scale/blockage complete for the following sizes (Note- Lead joint shall be measured and paid separately) :-
-
-
-
... More
80 mm bore
30
-
-
... More
100 mm bore
24
-
-
... More
Supply, laying, jointing and testing of CI Pipe with spigot & socketed end, centrifugally cast, Class LA, with rubber ring/ jointing material, push on joint laid in trenches in old/ new route as required at site including taking down the old/ unsv pipe line complete all as specified & directed of following sizes (Note : Excavation and earth work shall be measured and paid separately under respective items of schedule) :-
-
-
-
... More
80 mm dia
40
-
-
... More
100 mm dia
100
-
-
... More
150mm dia
40
-
-
... More
M&L for CI fittings, ISI marked, bends (any type, radius & angle) tapers any type (straight, bend, increasing decreasing or double socket etc) tee piees, single branch, 'Y' junction, double branch cross (socket & spigot or flanged) collars, caps & plugs for spigot socketed pipes upto 150 mm bore complete
50
-
-
... More
M&L for run lead joint incl jointing material for CI pipe for following sizes including burning & removing old lead joint complete :-
-
-
-
... More
80mm dia
4
-
-
... More
100mm dia
6
-
-
... More
150mm dia
2
-
-
... More
M&L for heavy duty CI Sluice Valve of pressure class PN-1.6 type flanged and drilled at both ends, conferming to ISI mark and having gun metal spindle and rings including wheel for operating all as specified including two numbers flanged socket and jointing materials such as bolts, nuts, washers, rubbers/ fibre board gasket including taking down old unserviceable valve from pipe line of both ends complete of following sizes :-
-
-
-
... More
80 mm dia
4
-
-
... More
100 mm dia
6
-
-
... More
150 mm dia
2
-
-
... More
Cutting of existing CI pipe for insertion of CI specials /valves etc. all as required including dewatering of leakage water etc complete for the following sizes :-
-
-
-
... More
80mm dia
4
-
-
... More
100mm dia
6
-
-
... More
150mm dia
2
-
-
... More
Refixing/ Relaying only GI pipe in position with all fittings after cleaning and removal of scale/blockages effectively incl taking out from trenches complete all as specified and directed for following sizes (Note : Excavation and earth work shall be measured and paid separately under respective items of schedule) :-
-
-
-
... More
15 mm bore
60
-
-
... More
20 mm bore
64
-
-
... More
25 mm bore
62
-
-
... More
40 mm bore
55
-
-
... More
50 mm bore
50
-
-
... More
80 mm bore
18
-
-
... More
Supply, laying, jointing & testing of GI Pipe, medium grade, including all fittings in old/new position, laid in trenches/ wall including taking down the old/unsv pipe line complete all as specified & directed of following sizes (Note : Excavation and earth work shall be measured and paid separately under respective items of schedule) :-
-
-
-
... More
80 mm dia
250
-
-
... More
50 mm dia
700
-
-
... More
40 mm dia
500
-
-
... More
25 mm dia
600
-
-
... More
20 mm dia
550
-
-
... More
15 mm dia
450
-
-
... More
Supply, laying, jointing & testing centrifugally cast (spun) Ductile Iron pressure pipes, 100mm Dia, socketed & spigot ends, class K-7 with push on joints ISI (IS:8329-2000) marked in any length, laid in trenches all as specified and directed by JE/Engr-in-charge
400
-
-
... More
M&L Ductile Iron fittings, IS-1538 marked viz bends, tapers, reducers, tee pieces (single or double branch) any type, angle/radius and straight connecting pieces, any type of end (flanged/socketed/spigot as reqd at site) but all ends flanged, size of pipe upto 150 mm bore, complete all as specified.
80
-
-
... More
M&L for Servicing of DG set, 3 phase, 30 KVA capacity, 415 volt, 50 Hz of Make-Ashok leyland with replacing the air filter, diesel filter, super by pass filter, lubricating filter,heavy duty coolant,15W40 lubricating oil (Make-HP/castrol/Valvoline/CAT), fuel pipe with bengo bolt, hose pipe complete set and vent housing with clamp incl servicing and cleaning of radiator & alternator assembly & diesel tank as per manufacturer instructions incl testing after repair & servicing all as specified and directed (Note:- Servicing of DG set shall be valid for 6 months or 250 Hrs which is earlier)
1
-
-
... More
All as per item No 51 but of DG set, 3 phase, 160 KVA capacity, 415 volt, 50 Hz of Make- Greaves Cotton
1
-
-
... More
S&F in repair maintenance free Lead Acid battery 180 AH,12 Volt including connection of following capacity complete.
2
-
-
... More
Drilling and tapping cast iron water mains (in position) for branch connections of 15 to 25 mm bore including necessary fittings and mild steel brackets complete
4
-
-
... More
S&F in repair heavy duty flanged GI pipe 100 mm bore including GI flanged bend with nut bolt and washer complete
24
-
-
... More
M&L for construction of brick masonary valve pit chamber including necessary excavation and earthwork, PCC, brick work,12 mm thick rendering in cement mortar 1:4 on internal surface of valve pit and mild steel sheet cover 3mm thick and mild steel angle iorn frame size 40 x 40 x 5 mm around of valve pit, locking arrangement with pad lock of size 50 mm brass, 6 leavers and key complete including two coat of synthetic enamel over a coat red oxide primer on steel surface with preparation of surface and including dismantling of existing valve pit complete all as specified & directed for following sizes :-
-
-
-
... More
Size 600 mm X 600 mm X 600 mm
8
-
-
... More
Size 900 mm X 900 mm X 900 mm
6
-
-
... More
Size 1200 mm X 1200 mm X 900 mm
5
-
-
... More
M&L for preparing the surfaces of wall of pump house/OH/UG sumps of size 600x450 mm and applying one coat of synthetic enamel paint (bule/Black) and written on it in white paint as 'Date of cleaning, Due date of cleaning, capacity of pump etc of letter not less than 35 mm height complete all as direceted
2
-
-
... More
M&L for writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high with synthetic enamel paint on existing steel/ RCC wall surface with synthetic enamelled paint complete
10
-
-
... More
S&F in repair heavy duty Brass forged Ball valve, screwed down high pressure 25 Kg/Cm2 with iron handle, screwed both ends complete for the following sizes of pipes :-
-
-
-
... More
50 mm dia
5
-
-
... More
40 mm dia
5
-
-
... More
25 mm dia
20
-
-
... More
20 mm dia
60
-
-
... More
15 mm dia
30
-
-
... More
S&F in repair direct on line starter 415 volt, 50 Hz with voltmeter, Ammeter, relay, timer and single phase preventor complete for following pump set capacity :-
-
-
-
... More
1/1.5 HP Pump Set
1
-
-
... More
3 HP Pump Set
1
-
-
... More
7.5 HP Pump Set
1
-
-
... More
S&F in repair CI non return valve 100 mm dia, heavy duty, class PN-1.6 flanged end complete
3
-
-
... More
Supply only Calcium hypochlorite 65% to 70% chlorine content in granual form(calcium based granular disinfect for water treatment) packed in 45 kgs each drum.
120
-
-
... More
Supply only bleaching powder Calcium Hypochloride minimum 32% cholorine as per IS-1065:1989 in 25 Kg Bag (Note :- Fresh lot of bleaching powder shall be supplied with in 45 Days from date of manufacturing as per monthy demand or as directed)
30
-
-
... More
Supply only MBBR-specific biological culture consisting of active aerobic and nitrifying microorganisms, suitable for sewage treatment in MBBR process complete as directed by Engineer-in-Charge.
80
-
-
... More
M&L for chlorine test kit with coloured sample complete with all testing fitment and OT solution in rexine finish box.
2
-
-
... More
M&L for replacement of industrial copper conductor submersible cable, PVC insulated and PVC sheathed cable, 1100 volt grade of size 4 sqmm x 3 core .
65
-
-
... More
Taking up submersible pump set upto 7.5 HP with MS column pipe from borewell and lowering the same after repairing with electric connection complete all as directed
2
-
-
... More
M&L for replacement of heavy duty MS column pipe, 50 mm dia, 3 m long flanged welded complete
4
-
-
... More
Cleaning of underground/semi underground sump by taking out all sludge, silt from bottom and cleaning all inside walls with wire brush and brooming the walls and top ceiling/roof including washing the walls with fresh water mixed with bleaching powder and draining out complete sludge, silt etc from bottom of the sump and applying one coat of lime wash for the UG sump of capacity 50,000 gallons complete all as directed.
1
-
-
... More
Cleaning of RCC OH tank, by taking out all sludge, silt from bottom and cleaning all side walls with wire brush and brooming the walls and ceiling/roof including washing the walls with fresh water with bleaching powder and draining out complete sludge, silt etc from bottom of the tank and applying one coat of lime wash inside complete for walls and roof/ceiling of 12 mtr approx staging for the following capacity :-
-
-
-
... More
1,00,000 gallons
1
-
-
... More
50,000 gallons
1
-
-
... More
M&L for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron strip of size 32 x 6 mm as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil complete all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) complete all as specified and directed
8
-
-
... More
Dismantling of pump set upto 7.5 HP from rusted base frame and refixing the same on new base frame complete (Note : MS base frame will be measured & paid seperately)
2
-
-
... More
M&L for replacement of PVC 100mm Heavy duty suction hose pipe for sewage well/sump of any size complete all as per directed
120
-
-
... More
S&F in repair of good quality tyre rubber coupling (No.TC/0/015-2913 DE) suitable for 40 HP / 30 HP pump set (Make-Unique/Form-Flex/HIC/Mahalaxmi/Metro)
1
-
-
... More
S &F in repair of good quality tyre rubber coupling (No. TC/P/014-2514-PX) suitable for 40 HP / 30 HP pump set
1
-
-
... More
Dismanlting and disconnection electrical and water connection of the pump and transport to work shop & opening carefully and servicing complete with replacing of bushes, gland packing, ball bearing, rubber gasket, nut and bolt and re-fixing it in original position and making out all electrical and water connection incl painting to two coats with synthetic enamell paint after necessary prepartion incl testing & commissioning complete for following capacity :- (Note :- Replacement of impellor rewinding of motor shall be measured and paid separately)
-
-
-
... More
7.5 HP
2
-
-
... More
30/40 HP
3
-
-
... More
M&L for rewinding of submersible motor with PVC insulated copper winding wire of existing gauge and size for following capacity. :-
-
-
-
... More
From 3 HP to 7.5 HP
2
-
-
... More
M&L for rewinding of electrical motor, 3 phase with super enamelled copper winding wire/ PVC insulated copper winding wire of existing gauge and size to get proper speed and load with removing burnt winding wire for following capacity of motor :-
-
-
-
... More
30/40 HP
2
-
-
... More
S&F in repair motor relay suitable for high pressure pump 3 HP, 230 volt
1
-
-
... More
S&F pump capacitor 50 MFD, 440 Volt
2
-
-
... More
S&F pump capacitor 25 MFD, 440 Volt
1
-
-
... More
M&L for stainless steel wire rope (ss-304) size 8 mm dia with 2 nos holding clamps suitable for hanging of sewage submersible pump complete all as directed
120
-
-
... More
M&L for cutting of road/path (width-25 cm x 40 cm) for laying of pipe line and making good to disturbed road/path including provision of PCC 1:2:4 type B-1 using 20 mm graded stone aggregate all as specified
94
-
-
... More
M&L for spray painting of complete water pumpset of cap 7.5 to 40 HP with two coats of synthetic enamelled paint of specified colour after preparation of surface
2
-
-
... More
M&L for painting of water supply pipes networks of 80/100/150 mm dia consisting of valves any type/ size at various pump houses inlcuding duly scrapping thoroughly the existing corroded paint / dirt/ dust / rust and preparing the surface and applying two coats of synthetic enamel paint over a coat of red oxide primer as per the colour code and marking the water flow directions on pipe lines as directed.
60
-
-
... More
Collecting water sample in clean bottle from borewell/ UG sump/service tank and getting Chemical, Boilogical, Potability Testing of water sample (as per IS 10500:2012) at Govt recognised/approved institute/Lab for potability and chemical analysis complete all as specified & directed
10
-
-
... More
S&F in repair 3 pole power contactor, type MNX-32 with coil voltage 230 Volt incl connection complete
1
-
-
... More
S&F in repair bolted fuse link type HG, 4 amp size F-1
2
-
-
... More
S&F in repair heavy duty electric motor terminal block 70 amp, 415 Volt for 40 HP/ 30 HP motor complete (Make-Elmex/Wago/Phoenix)
1
-
-
... More
S&F in repair heavy duty electric panel mounted terminal block 40 amp, 2 row, 4 way complete
1
-
-
... More
S&F in repair din type terminal block 16 amp, 2 row, 12 way complete
1
-
-
... More
S&F heavy duty GI pipe 40mm/50mm bore with heavy duty GI socket and taking up old pipe alongwith submersible pump set of any capacity from borewell and lowering the same complete all as directed
12
-
-
... More
Cleaning of sewage well/sump of size 3.50 mtr dia X 06 mtr depth, by taking out all sludge, silt from bottom and cleaning all inside walls with wire brush and brooming the walls and top ceiling/roof including washing the walls with fresh water mixed with bleaching powder and draining out complete sludge, silt etc from bottom of the sump and applying one coat of lime wash ar inside wall of sump complete all as directed (Note : All T&Ps shall be arranged by the contractor and cost of the same is deemed to be included in quoted rate)
1
-
-
... More
All as per above but for sewage well/sump of size 2.00 mtr dia X 06 mtr depth
1
-
-
... More
M&L for replacement of asbestos gland rope of required size for water pumps complete
2.5
-
-
... More
S&F in repair of GI strip size 25X4 mm thick incl shaddle, to be fixed on pillar/dome of OH tank as directed
25
-
-
... More
S&F in repair CI heavy duty high pressure double air release valve 100 mm dia flanged ends all as specified and directed
2
-
-
... More
S&F in repair rubber gasket 3mm thick with holes for flanged pipe/sluice valve of size 80 to 150 mm dia to avoid leakage all as specified and as directed
6
-
-
... More
S&F in repair of MS nut bolt of any size with washer complete all as specified and as directed
30
-
-
... More
S&F in repair & replacement Smart Digital water level indicator having 10-levels % Indicator to detect & display the Water level in an Underground/Overhead tank having maintenance free Magnetic sensors.Buzzer alarm sounds on Low & High Levels complete .(NOTE:-Price Includes Corrosion Free Magnetic Sensors with wire-10 nos.( each system) with 3 Core Tinned Copper Sensing Cable upto 50 Mtrs.). all as specified and as directed
2
-
-

