Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Special Repair Replacement Of Lt Xlpe Cable Lt Panel Bus Bar Chamber Street Light Poles And Connected E/m Items In Int Officer Mess Surrounding Area Of Age U E S No Ii Under Ge U Elect Supply Delhi Cantt in New Delhi, Delhi, with an estimated contract value of Rs. 32,50,000. The bid opening date for this tender is 06-11-2026 and the last date for bid submission is 27-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - Delhi Tender
Opening Date6 Nov 2026
Closing Date27 Nov 2026
Tender Amount₹ 32,50,000
Costs
EMD
₹ 65,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Special Repair Replacement Of Lt Xlpe Cable Lt Panel Bus Bar Chamber Street Light Poles And Connected E/m Items In Int Officer Mess Surrounding Area Of Age U E S No Ii Under Ge U Elect Supply Delhi Cantt
Contact
Tender Id
2026_MES_797736_1Tender No
GE ELECT/TOKEN-86/2026-2027Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc, complete all as specified and directed by Engineer- in- Charge. Note : Measurement shall be taken after punning down.
180
1
-
... More
S&F sub class B bricks having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc complete all as specified and directed by Engineer- in- Charge.
12
1
-
... More
All as per sr item No 5 here in before but using old bricks obtained under srl item No 1 here in before complete all as specified and directed by Engineer- in- Charge.
5
-
-
... More
Supplying, laying, jointing and testing of underground cables, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, IS 7098 marked, suitable for LT 1100 Volt system, laid in trenches including jointing & testing complete all as specified and directed of following sizes:-
Note :- Excavation, earth work ,cable protection, sand fillings, cable joint shall be measured and paid separately under respective items of schedule.
-
-
-
... More
16 Sqmm 4 core
800
1
-
... More
50 Sqmm 3.5 core
200
1
-
... More
70 Sqmm 3.5 core
400
2
-
... More
120 Sq mm 3.5 core.
500
1
-
... More
185 Sq mm 3.5 core.
1400
2
-
... More
Material and labour for boring of hole under road/pavement/hard standing or any other situation by manual means and suitable for passing of GI pipe 40 to 100 mm bore and making good both ends complete all as specified and directed by Engineer- in- Charge.
120
1
-
... More
M&L for boring of holes under road/pavement/hard standing by trenchless technology using ultra sound technique and neccesasry machine including material and labour for HDPE pipe of 160 mm dia suitable for 04 kg/sqcm working pressure. Wall thickness of pipe not lersss than 6.5 mmm for 11 KV cable complete all as specified and directed by Engineer- in- Charge. NOTES :- (i) The contractor will be responsible for taking permission from appropriate authority i.e. NHAI/IGL/ if needed units, needed for above said work.
(ii) Trenchless depth shall not be less than 2 mtr from ground level until or otherwise required due to site requirement and contractor has to maintain the trenchless depth upto 4 mtrs from ground level all quoted rates shall deemed to be included to maintain the trench less depth as directed during excavation to avoid damages to the existing services. (iii) The quoted rate shall deemed to be included for repairs/rectification for damaged done to the existing/ communication and water supply system /sewage system during excavation of work.
40
2
-
... More
M&L in replacement for GI tubes of size 150mm dia (light grade) with necessary accessories/ fittings for cable protections/pole for crossing of culverts/nallah complete all as specified and directed by Engineer- in- Charge.
30
3
-
... More
M&L in replacement for GI tubes of size 100mm dia (light grade) with necessary accessories/ fittings for cable protections/pole for crossing of culverts/nallah complete all as specified and directed by Engineer- in- Charge.
60
4
-
... More
M&L in replacement for GI tubes of size 50 mm dia (light grade) with necessary accessories/ fittings for cable protections/pole for crossing of culverts/nallah complete all as specified and directed by Engineer- in- Charge.
100
5
-
... More
Supply, installing, testing and commissioning in replacement of factory made and tested Bus bar chamber outdoor type with canopy made out of 3.15 mm CRCA MS sheet, and 40x40x5mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, front opening type, with apron for cable entry closing locking arrangement ,of size 450mm x 450mm x 300mm with 4 Nos 500 Amps aluminium bus bar and with 250 Amp MCCB, 4 pole, 36 KA, 415 Volt 50 Hz including excavation, earth work and platform for the Bus bar chamber with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class 'B', old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed sotne aggregate on top and grouting bolts etc for Bus bar chamber. The platform shall be such that it is of a height 45 cm above the nearest road level.
2
1
-
... More
Material & Labour for earthing complete with galvanized Steel earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 meters below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and incl galvanized iron strip 25X4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by GI protection pipe light grade 15mm dia connected to main earth wire on pole or controll board GI pipe light grade 20mm bore for watering funnel with wire mesh PCC chamber pit in PCC 1:3:6 type C-1 40mm yhick Precast RCC -25 cover reincorced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle, excavation and earth work in any type of soil and removal upto 50m complete all as sprecified and shown in electrical plate No. 3 connected to earthing test point complete all as specified and directed by Engineer- in- Charge including testing on completion. Note : (a) The unit rates quoted against this item shall be deemed to include the cost of excavation and earth work in any type of soil, common salt & charcoal dust in alternate layers, PCC 1:3:6 as in pit, precast RCC 1:2:4 type B-1 with necessary reinforcement as in cover & frame for pit, funnel, watering pipe 20 mm bore GI pipe light grade, protection pipe 15 mm bore GI pipe medium grade etc.
(b) The quoted rates shall also deemed to include the cost of earth test point and earth strip/GI lead wire and protection pipe up to 7.5 meter beyond the earth plates electrode.
8
1
-
... More
Supplying & fixing of LED street light Fitting 60 watt LED, IP-66 protection, single piece pressure die cast aluminium housing high grade powder coated finish with heat resistant toughened clear glass cover for lamp and control gear compartment with high voltage surge protection device up to 4.5 KV, prewired conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified and directed by Engineer- in- Charge.
10
1
-
... More
S&F in replacement KIOSK box weather proof including made out of one piece mounted SMC base and door pole mounted hinged door size 333x233x120mm outside and 300x200x105mm inside dimensions comprising of aluminium bus bar 4 strips for 3 phase and neutral 63 Amps including embossing/painting of danger notice of size not less than 10cm x 7.5cm with letters, figures and conventional skull and bones in signal red colour on front face of KIOSK box body including MS clamp of size 25x3 mm with suitable size nut, bolts & washer complete all as specified and directed by Engineer- in- Charge.
10
1
-
... More
Taking down unservicable RCC/ steel tubular poles of any type and supply & installing of steel tubular swaged poles type 410 SP-31 (9 mtr long) of approx wt.147 kg conforming to IS 2713 (Part-II) including excavation, earth work, PCC foundation, base plate,PCC coping,GI pipe for cable protection etc. and GI bracket for fitting mounting, complete all as per manufacturer's instructions complete all as specified and directed by Engr-in-charge. NOTE:- The unit rate in this item is deemed to be included the cost of exacavation and earth work in any type of soil, PCC foundation 1:4:8 type D-2 , PCC coping 1:2:4 type B-1 as in steel tubular pole and GI bracket made of GI pipe medium grade 40 mm bore, 1.5 mtr long for fixing of street light fitings. The steel pole shall be painted by bituminious paint total length inside and up to planting depth outside and remaining portion of pole painted with two coat of aluminium paint over a coat of red oxide complete all as specified and directed.
12
1
-
... More
Supply, drawing, connecting & testing of 3 core, 1.5 Sqmm PVC insulated and PVC rounded sheathed, copper conductor (flexible) industrial cable 1100 Volts grade conforming to IS-694 on steel tubular pole/PCC Pole from KIOSK box to light fittings including PVC conduit and providing suitable copper lugs complete all as specified and directed by Engr-in-charge. Note : Steel tubular pole shall be measured and paid separetely.
100
1
-
... More
Supply, installing, testing and commissioning in replacement of factory made and tested (including CPRI type tested certified panel) LT Panel board, cubical compartmentalized, outdoor type double door, platform mounted, suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with insulated aluminium bus bars four pole installed on porcelain/SMC insulator. The panel shall be dust and vermin proof. IP-65 class protection and shell be made of 3.15 mm CRCA MS sheet, and 50x50x6mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, front and rear opening type, with apron for cable entry closing locking arrangement including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade of appropriate size ( but not less than 2.5 Sqmm) and comprising of the following :- (a) Incoming :-
(i) MCCB 4 pole , 630 Amps,50 Hz,415 Volts, 50 KA, with microprocessor release - 01 Nos
(ii) Voltmeter 0-500 volts digital type with 4 way rotary selector swicth -01No (iii) Ammeter digital type with 4 way rotary selector switch-01No (iv) CTs ratio 600/5 A ,class 1, ISI marked -01 sets of three (v) ON LOAD Change over switch 400 amps 4 pole-1 Nos
(vi) Indicating lamp- 01 set of three.
(vii) Aluminium bus bar of rating 800 Amps- set of four (b) Outgoing
(i) MCCB 4 pole, 250 Amps, 50 Hz, 415 Volts, 36 KA with thermal magnetic release - 04 Nos
(i) MCCB 4 pole, 160 Amps, 50 Hz, 415 Volts, 25 KA with thermal magnetic release - 02 Nos (c) Platform of Panel. Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class 'B', old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. The platform shall be such that it is of a height 45 cm above the nearest road level. Note :-
(i) All outgoing feeder shall be connected by cable through suitable size gland plate / glands. (ii) The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint. (iii) All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947/IS 13947/Pt.II/1993 (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer.
1
1
-
... More
All as in item No 19.00 here-in-before but comprising of the following :- (a) Incoming :-
(i) MCCB 4 pole, 250 Amps, 50 Hz, 415 Volts, 36 KA with microprocessor release - 01 No (ii) Voltmeter 0-500 volts digital type with 4 way rotary selector swicth -01No (iii) Ammeter digital type with 4 way rotary selector switch-01No (iv) CTs ratio 250/5 A ,class 1, ISI marked -01 sets of three (v) Indicating lamp- 01 set of three
(vi) Aluminium bus bar of rating 500 Amps- set of four (b) Outgoing
(i) MCCB TP, 100 Amps, 50 Hz, 415 Volts, 25 KA with thermal magnetic release - 02 Nos
(ii) MCCB TP, 63 Amps, 50 Hz, 415 Volts, 25 KA with thermal magnetic release - 01 No
2
1
-
... More
Supplying & fixing of LED flood light Fitting 120 watt LED, IP-66 protection, single piece pressure die cast aluminium housing high grade powder coated finish with heat resistant toughened clear glass cover for lamp and control gear compartment with high voltage surge protection device up to 4.5 KV, prewired conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified and directed by Engr-in-charge.
12
2
-
... More
Supplying and installation in replacement factory made and tested (including CPRI type tested certified panel) Timer Panel board, cubical, outdoor type, platform mounted, suitable for 415 volts, 3 phase, 4 wire, 50 Hz AC supply system. The panel shall be dust and vermin proof. IP-65 class protection and shall be made of 3.15 mm CRCA MS sheet, and minimum 32x32x5mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, front opening type, closing locking arrangement including power wiring with 10 Sqmm PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade and internal wiring with 1.5 Sqmm copper conductor and comprising of the following :-
(i) MCCB 3 pole, 32 Amps, 50 Hz, 415 Volts, 16 KA with thermal magnetic release - 01 No (ii) 3 Pole power contractor, type MNX 110 having 2 NO +2 NC contacts - 01 ( iii) Analog Time switch , 240 Volt AC , 50 Hz - 01 No
(iv) Auto /manual selector switch - 01 No
(v) Aluminium bus bar 100 Amps, 4 strip 3 phase and neutral 415 volts, 50 Hz, duly insulated with heat shrinkable PVC sleeves - 01 Set
Platform for the timer panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class 'B', old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. The platform shall be such that it is of a height 45 cm above the nearest road level.
6
3
-
... More
Note 1 : Contractor should procure and provide 50 % of the material as listed above within 15 days of the placing of work order and shall be verified by the Engr-in-charge. Note 2 : The quoted rate shall be deemed to be include making good of any damage caused during the execution of work.
-
-
-

