Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair/maint Of Lt Oh Line, Ug Line, Cables, Panels, Poles, Security Lights And Other E/m Items And Works At Manesar Camp, Dundahera Mil Stn And Indu Binola Under Age E/m Of Ge (south) Delhi Cantt-10 in New Delhi, Delhi, with an estimated contract value of Rs. 43,00,000. The bid opening date for this tender is 31-10-2026 and the last date for bid submission is 21-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Delhi Tender

Opening Date31 Oct 2026
Closing Soon21 Nov 2026
Tender Amount₹ 43,00,000 
Notes
Download

Costs

Description

Repair/maint Of Lt Oh Line, Ug Line, Cables, Panels, Poles, Security Lights And Other E/m Items And Works At Manesar Camp, Dundahera Mil Stn And Indu Binola Under Age E/m Of Ge (south) Delhi Cantt-10

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
REPAIR/MAINT OF LT OH LINE, UG LINE, CABLES, PANELS, POLES, SECURITY LIGHTS AND OTHER E/M ITEMS AND WORKS AT MANESAR CAMP, DUNDAHERA MIL STN AND INDU BINOLA UNDER AGE E/M OF GE (SOUTH) DELHI CANTT-10
Report Missing Document

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Removal of surplus excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

308

-

-

... More
M&L for Sand cushioning to under ground cable with dry sand locally available 8cm thick before laying the cable and 15 cm above the cable, stretching and testing of cable complete all as specified & as directed.

190

-

-

... More
Supply and laying sub class ‘B’ bricks well burnt for cable protections laid flat with length equal to width of brick over cable perpendicular to length of cable complete all as specified and as directed.

28.01

-

-

... More
M&L for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate for foundation of pole & stay complete all as specified and as directed.

1

-

-

... More
M&L PCC 1:3:6 type C 2 using 40 mm graded stone aggregate for filling of pole & stay complete all as specified and as directed.

1

-

-

... More
M&L PCC 1:2:4 type B-2 using 20 mm graded crushed stone aggregate for copining of pole complete all as specified and as directed.

0.5

-

-

... More
Taking down old unsv ACSR conductor of any size from poles incl aluminium binding wires,jumpering,bindings at insulators etc complete all as specified and as directed.

2

-

-

... More
M & L for ACSR conductor of any type including stringing on LT poles complete including aluminium binding wires, jumpering, bindings at insulators etc complete all as specified and as directed.

2

-

-

... More
M & L for galvanised steel wire 4 mm dia to be stringed as continuous earthing wire on over head LT lines complete all as specified and as directed.

20

-

-

... More
S & F mild steel cross arm, bracings, supports , clamps and back plate fabricated from structural steel section, including nut , bolts , washers, welding , bendings cold or hot, drilling hole for both in any shape or size as indicated or directed and inclusive of one prime coat, one under coat and one finishing coat of paint incl taking down the old unserviceable MS sections complete all as directed.

2

-

-

... More
M & L for galvanised stay strand size 7/4 mm complete all as specified and as directed incl taking down the old unserviceable stay wire.

0.3

-

-

... More
M & L for stay assembly complete with accessories as shown in electrical plate No 1 (Loop type insulator, stay clamps, excavation and concrete only measured separately) using diameter of stay rod 16 mm and MS stay plate 230 mm x 230 mm including taking down complete all as specified and as directed.

2

-

-

... More
Taking out old unserviceable ACSR conductor of any size from existing poles at various locations of OTM and perimeter of Manesar Army Camp tree distribued area incl aluminium binding wires,jumpering,bindings, insulators cross arms, bracings, supports , clamps and back plate stay wire etc complete all as specified and as directed.

5.5

-

-

... More
Supply and laying jointing and testing of XLPE insulated, armoured, heavy duty LT under ground cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area for following sizes, complete all as specified and as directed. (a) 10 Sqmm 2 Core.

240

-

-

... More
(b) 16 Sqmm 4 Core.

350

-

-

... More
(c) 25 Sqmm 3.5 Core.

680

-

-

... More
(d) 35 Sqmm 3.5 Core.

400

-

-

... More
(e) 50 Sqmm 3.5 Core.

420

-

-

... More
(f) 70 Sqmm 3.5 Core.

450

-

-

... More
(g) 95 Sqmm 3.5 Core.

540

-

-

... More
(h) 120 Sqmm 3.5 Core.

280

-

-

... More
(j) 150 Sqmm 3.5 Core.

300

-

-

... More
(k) 185 Sqmm 3.5 Core.

210

-

-

... More
(l) 240 Sqmm 3.5 Core.

280

-

-

... More
(m) 300 Sqmm 3.5 Core.

250

-

-

... More
(n) 400 Sqmm 3.5 Core.

320

-

-

... More
Taking out old unsv feeder pillar panel and Supply, install and testing of outdoor type, floor mounted, weather vermin proof factory made, CPRI approved, facricated of 3.15 mm thick CRCA sheet, on frame of mild steel angle iron 40 mm x 40 mm x 6 mm, 45 cms above the ground level duly supported with mild steel angle iron 50 mm x 50 mm x 6 mm thick in PCC foundation (1:2:4), type B-I, using 20 mm graded crushed stone aggregate, LT panel shall be totally enclosed with front double door and rear opening with IP-54 protection as per IS/8623 duly powder coated for 433 volts, 3 phase, 4 wire having TPN Aluminium bus bars suitable for 480 Amps to supply load and 1 Phase + Neutral SPN Aluminium bus bars suitable for 100 Amps to security lights load duly drilled holes for connections, RYB insulated with different colour code and sleeved insulators complete prewired and cable connection with copper conductor wire upto copper bus bars including all incoming and outgoing cable connection with suitable size of copper lugs and cable glands complete all as specified and as directed. and also comprissing of following:- Incoming:- (i) MCCB 400A 04 pole - 36 kA 01 Nos, ICS=100%=ICU Out going :- (i) MCCB 200 A 04 pole - 36 kA 01 Nos, ICS=100%=ICU (ii) MCCB 100A 04 pole - 25 kA 01 No, ICS=100%=ICU (iii) MCCB 63 A 04 pole - 25 K 01 No, ICS=100%=ICU (iv) Copper bus bar suitable of capacityas per above description. (v) Digital Voltmeter (v) Digital Ammeter. Make: HPL/SEIMENS/L&T- 01 No (vi) R-Y-B Neon indicator lamp panel mounting type (set of 03 ) = 01 Set (vii) CT's 200/5 A CL 1.0 Tape Wound- 01 Set. (Set of three) (viii) Control wiring of suitable 4/6 sqmm copper wire for connecting above accessories-each job (ix) PCC Work for Panel foundation -Each job

2

-

-

... More
Taking out old unsv feeder pillar panel and supply installation, commissioning and testing of LT panel, outdoor type, floor mounted, weather vermin proof factory made, CPRI approved, facricated out of 3.15 mm thick CRCA sheet, on frame of mild steel angle iron 40 mm x 40 mm x 6 mm, 45 cms above the ground level duly supported with mild steel angle iron 50 mm x 50 mm x 6 mm thick in PCC foundation (1:2:4), type B-I, using 20 mm graded crushed stone aggregate, LT panel shall be totally enclosed with front double door and rear opening with IP-54 protection as per IS/8623 duly powder coated for 433 volts, 3 phase, 4 wire having TPN Aluminium bus bars suitable for 400 Amps load duly drilled holes for connections, RYB insulated with different colour code and sleeved insulators complete prewired and cable connection with copper conductor wire upto copper bus bars including all incoming and outgoing cable connection with suitable size of copper lugs and cable glands complete all as specified and directed and also comprissing of following:- Incoming:- (i) MCCB 315 A 04 pole - 35 kA 01 Nos, ICS=100%=ICU Ougoing:-(ii) MCCB 100 A 04 pole - 25 kA, 02 Nos, ICS=100%=ICU (iii) MCCB 63 A 04 pole - 25 K 01 Nos, ICS=100%=ICU (iii) Copper bus bar suitable of capacity 480 A - set of 4 (iv) Digital Voltmeter (v) Digital Ammeter. Make: HPL/SEIMENS/L&T- 01 No (vi) R-Y-B Neon indicator lamp panel mounting type (set of 03 ) = 01 Set (vii) CT's 200/5 A CL 1.0 Tape Wound- 01 Set. (Set of three) (viii) Control wiring of suitable 4/6 sqmm copper wire for connecting above accessories-each job (ix) PCC Work for Panel foundation -Each job

3

-

-

... More
Supply and fixing Octogonal hot dip galvanised iron pole, 7 mtr long Top 70mm, bottom 135 mm,segment thickness 3 mm, base plate 225mmx 225mm x 16 mm, single arm of length 1000 mm, door height 420 mm long weather proof reinforced door opening with junction box mounting arrangements, inbuilt suitable junction box for for 4 Nos 100A aluminium busbar mounted on insulators, terminal and provision of din rail for fixing of MCB 10A capacity including nuts, bolts and washer, 'J' shape, EN8 foundation bolt with nuts template including RCC foundation as per manfacturer's design confirming to IS 1786. The foundation shall extended above surrounding levels by 300 mm complete all as specified and as directed. including surface clearance and including marking of pole number with black paint in yellow circle, complete all as specified and directed. Make of Pole: Utkarsh/Wipro/Surya/Bajaj Note:- (i) Foundation drawing as per OEM should be submitted for approval of GE before commencement of foundation work. (ii) Excavation/earthwork, removal and returning filling included in the quoted rate. (iii) The rate deemed to be included of taking out old unserviceable RCC/PCC poles 9 mtr long with all connected items.

38

-

-

... More
Disconnecting the windings of loose overhead conductors of LT lines from insulators and restringing the same for proper sag and rewinding incl aluminium winding wires, tapes etc and jumpering for any type of conductor complete of single run conductor complete all as specified and as directed. Note: Triming of tree branches upto 3 m from the conductor is deemed to be included in the rates quoted.

2490

-

-

... More
Supply and fix in replacement of insulator pin type porcelain vitereous , white brown or green insulator including one galvanised mild steel spindle, two galvinised washer and one GI nut 100 mm height and 65 mm dia for 1100 Volt grade complete all as specified and as directed.

12

-

-

... More
Supply and fix in replacement of insulator shackle type, porcelain, vitereous, white brown or green insulator including one galvanised mild steel straps, washers, insulator bolts, washer and nuts for working pressure 1100 Volts height 100mm, dia 115mm, section of strap (31x5) mm dia of bolt 14 mm complete all as specified and as directed.

14

-

-

... More
Supply and fix in replacement of loop type insulator vitreous white,brown or green insulator small size,with over all dimensions 65 x 90 mm,clearance of hole 16 mm complete all as specified and as directed.

10

-

-

... More
Supply and fixing of moulded case circuit breaker Four pole 630 Amp 36 KA capacity 415V 50Hz with adjustable thermal and magnetic relay, Ics=100% Icu, 75% Icu incl taking out the old unserviceable complete all as specified and as directed.

3

-

-

... More
Supply and fixing of moulded case circuit breaker Four pole 400 Amp 36 KA capacity 415V 50Hz with adjustable thermal and magnetic relay, Ics=100% Icu, 75% Icu incl taking out the old unserviceable complete all as specified and as directed.

3

-

-

... More
Supply and fixing of moulded case circuit breaker Four pole 250 Amp 36 KA capacity 415V 50Hz with adjustable thermal and magnetic relay incl taking out the old unserviceable complete all as specified and as directed.

3

-

-

... More
Supply and fixing of moulded case circuit breaker Four pole 200 Amp 36 KA capacity 415V 50Hz with adjustable thermal and magnetic relay incl taking out the old unserviceable complete all as specified and as directed.

4

-

-

... More
Supply and fixing of moulded case circuit breaker Four pole 160 Amp 25 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and as directed.

4

-

-

... More
Supply and fixing of moulded case circuit breaker Four pole 125 Amp 25 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and as directed.

4

-

-

... More
Supply and fixing of moulded case circuit breaker Four pole 100 Amp 25 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and as directed.

3

-

-

... More
Supply and fixing of moulded case circuit breaker Four pole 100 Amp 16 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and as directed.

3

-

-

... More
Supply and fixing of moulded case circuit breaker Four pole 63 Amp 16 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and as directed.

4

-

-

... More
Supply and fixing of digital voltmeter 0 to 500 volts 96 x96mm flush type in LT Panels incl taking out the old unserviceable complete all as specified and as directed.

3

-

-

... More
Supply and fixing of digital ammeter range as per existing 96 x96mm flush type in LT panels incl taking out the old unserviceable complete all as specified and as directed.

3

-

-

... More
Supply and fixing of LT current transformer ratio from 200/5 Amps or 100/5 or 400/5 in LT panels incl taking out the old unserviceable complete all as specified and as directed.

3

-

-

... More
Supply and fixing selector switch of voltmeter/ammeter in LT panel boards incl taking out the old unserviceable complete all as specified and as directed.

5

-

-

... More
Supply and fixing indicator assembly (RYB) LED type in LT panel boards incl taking out the old unserviceable complete all as specified and as directed.

5

-

-

... More
M & L for tube light grade galvanised with all fittings laid along the pole/in trenches / under road or floor of 40 mm bore including removing the rusted old one complete all as specified and as directed.

36

-

-

... More
M & L for tube light grade galvanised with all fittings laid along the pole/in trenches / under road or floor of 50 mm bore including removing the rusted old one complete all as specified and as directed.

36

-

-

... More
M & L for tube light grade galvanised with all fittings laid in trenches / under road or floor of 80 mm bore including removing the rusted old one complete all as specified and as directed.

18

-

-

... More
Supply and fixing in replacement of 1100 volts grade heavy duty cable PVC insulated aluminium conductor as service connections served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm dia GI suspension wire one twin core cable flat or circular stranded conductor of size 10 sqmm 2 core complete all as specified and as directed.

450

-

-

... More
M & L for trimming of tree branches touching or leaning over overhead power lines of one span 2 to 5 span in same pole will be measure as one unit) and removing of cut tree branches from the site complete all as specified and as directed.

350

-

-

... More
M & L for Earthing complete with GI earth plate 60x60cmx6mm thick electrode and 4mm dia GI wire as earthing lead.burried directly in ground ( earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level. connected to GI wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 15 mm dia light grade up to 7.5 mtr length of earth wire,charcoal dust and salt etc and connected to earthing test point including taking down of existing earthing complete all as specified and as directed.

5

-

-

... More
M & L for earth continuity conductor using GI strip 32 x 6 mm as earthing lead complete all as directed incl taking down the old unserviceable complete all as specified and as directed.

20

-

-

... More
M & L for house service bracket (hook type ) complete with 3.0M long GI pipe 40mm dia medium grade two nos 90 degree bends, MS Hook and stay or guy complete all as specified and as directed.

20

-

-

... More
Supply and installation of on load change over switch in sheet metal enclosure of capacity 63 Amps, 4 pole complete all as specified and as directed.

2

-

-

... More
Taking down existng unserviceable street/security light LED fittings fittinsgs of any capacity any type from pole/wall afte disconnection the connecting wires , carrying to store yard for necessry repair/replacement of spares etc complete all as specified and as directed. Note: (a) new spares required to be replaced shall be deemed in the quoted rate.(b) LED driver will be measured and separately.

40

-

-

... More
Refixing only the street light fittings after repair obtained from item No. 47 here in before incuding making connections with cables and testng complete all as specified and as directed. Note: Cable required for replacement shall be measred and paid separately.

40

-

-

... More
S&F in replacement of LED Street Light Fitting, 60 Watt, highly efficient, made of pressure die-cast aluminium housing with individual lenses and toughened glass cover, complete with fixing arrangements including MS clamp, nuts, bolts, anchor fasteners, washers, wiring connections, testing and commissioning, with the following features all as specified and directed by Engineer-in-Charge. i) Luminaire Housing: Pressure die-cast aluminium, corrosion resistant, powder coated. ii) Light Source: 60 Watt high-power LEDs, cool white (CCT ≥ 5700K). iii) Luminous Efficacy: ≥ 110 lm/W. iv) Lumen Output: ≥ 6600 lumens. v) CRI: ≥ 70. vi) LED Life: ≥ 50,000 burning hours (L70 at 25°C). vii) Optics: Secondary lens over individual LEDs with toughened glass protection. viii) Ingress Protection: IP65 or higher. ix) Electricals: Power factor ≥ 0.95, THD < 10%, system efficiency > 85%, operating voltage 140–270V AC, 50 Hz. x) Surge Protection: Minimum 4 kV built-in SPD. xi) Mounting: Supplied complete with MS clamp, nut, bolt, anchor fasteners, and washers for pole/surface fixing. xii) Compliance: As per IS/IEC standards.

32

-

-

... More
S&F in replacement of LED Street Light Fitting, 70 Watt, highly efficient, made of pressure die-cast aluminium housing with individual lenses and toughened glass cover, complete with fixing arrangements including MS clamp, nuts, bolts, anchor fasteners, washers, wiring connections, testing and commissioning, with the following features all as specified and directed by Engineer-in-Charge. i) Luminaire Housing: Pressure die-cast aluminium, corrosion resistant, powder coated. ii) Light Source: 70 Watt high-power LEDs, cool white (CCT ≥ 5700K). iii) Luminous Efficacy: ≥ 110 lm/W. iv) Lumen Output: ≥ 6600 lumens. v) CRI: ≥ 70. vi) LED Life: ≥ 50,000 burning hours (L70 at 25°C). vii) Optics: Secondary lens over individual LEDs with toughened glass protection. viii) Ingress Protection: IP66 or higher. ix) Electricals: Power factor ≥ 0.95, THD < 10%, system efficiency > 85%, operating voltage 140–270V AC, 50 Hz. x) Surge Protection: Minimum 4 kV built-in SPD. xi) Mounting: Supplied complete with MS clamp, nut, bolt, anchor fasteners, and washers for pole/surface fixing. xii) Compliance: As per IS/IEC standards.

38

-

-

... More
S&F in replacement of Post Top Lantern Light, LED 35 Watt, IP65 protection, with symmetric light distribution, suitable for outdoor lighting of gardens, pathways, and open areas, complete with fixing arrangements, connections, testing and commissioning, all as specified and directed by Engineer-in-Charge, with the following minimum features: i) Luminaire Housing: High-strength pressure die-cast aluminium/polycarbonate body, corrosion resistant, UV stabilized, powder coated, designed for pole top mounting. ii) Light Source: 35 Watt high-power LEDs, Cool White (CCT ≥ 5700K). iii) Luminous Efficacy: ≥ 110 lm/W. iv) Lumen Output: ≥ 3800 lumens. v) CRI: ≥ 70. vi) LED Life: ≥ 50,000 burning hours (L70 at 25°C). vii) Optics: Symmetric light distribution with clear/diffused polycarbonate diffuser for uniform illumination. viii) Ingress Protection: IP66 or higher. ix) Impact Resistance: IK07 or higher. x) Electricals: Power factor ≥ 0.95, THD < 10%, system efficiency > 85%, operating voltage 140–270V AC, 50 Hz. xi) Surge Protection: Minimum 4 kV built-in SPD. xii) Mounting: Suitable for post top mounting on poles of 2.5 m to 4 m height with supplied bracket/clamp. xiii) Compliance: As per IS/IEC standards.

10

-

-

... More
S&F in replacement of LED high mast light, 200 Watt, highly efficient, made of pressure die-cast aluminium housing with individual lenses and toughened glass cover, complete with fixing arrangements including MS clamp, nuts, bolts, anchor fasteners, washers, wiring connections, testing and commissioning, with the following features all as specified and directed by Engineer-in-Charge. i) Luminaire Housing: Pressure die-cast aluminium, corrosion resistant, powder coated. ii) Light Source: 200 Watt high-power LEDs, cool white (CCT ≥ 5700K). iii) Luminous Efficacy: ≥ 110 lm/W. iv) Lumen Output: ≥ 6600 lumens. v) CRI: ≥ 70. vi) LED Life: ≥ 50,000 burning hours (L70 at 25°C). vii) Optics: Secondary lens over individual LEDs with toughened glass protection. viii) Ingress Protection: IP66 or higher. ix) Electricals: Power factor ≥ 0.95, THD < 10%, system efficiency > 85%, operating voltage 140–270V AC, 50 Hz. x) Surge Protection: Minimum 4 kV built-in SPD. xi) Mounting: Supplied complete with MS clamp, nut, bolt, anchor fasteners, and washers for pole/surface fixing. xii) Compliance: As per IS/IEC standards.

4

-

-

... More
Supply and fixing in replacement of LED driver suitable for 45 W to 60 W complete all as specified and as directed.

20

-

-

... More
Supply and fixing in replacement of LED driver suitable for 72 W complete all as specified and as directed.

15

-

-

... More
Supply and fixing in replacement of LED driver suitable for 90W to 120 W complete all as specified and as directed.

5

-

-

... More
S & F in repair junction box of size 200x150x100 mm made out of 1.6mm thick MS sheet front openable, weather & vermin proof incl painting two coats of synthetic enamels paint over coat of red oxide primer. Connection box shall be suitable for housing & incl AI bus bar 25 Amps Cap 2 Nos. MCB SP6 Amps-01 No and having provision of cable hole in bottom for two to three cables of size 10 Sqmm 2 core armoured cable connection boxshall be fitted on street light pole and fixing arrangements i.e MS clamps etc deemed to be provided by the contractor, complete all as specified and as directed.

32

-

-

... More
M & L for Cutting out the burnt out cable end and reconnecting with providing new lugs,tapes etc for cable size 25 sqmm 3.5 core to 50 sqmm 3.5 core complete all as specified and as directed.

60

-

-

... More
M & L for Cutting out the burnt out cable end and reconnecting with providing new lugs,tapes etc for cable size 70 sqmm 3.5 core to 120 sqmm 3.5 core complete all as specified and as directed.

30

-

-

... More
Material and labour for replacement of panel control wiring in LT Panels and Feeder Pillar Boxes using solid copper conductor single core PVC insulated 2.5 sqmm cable for voltmeter, ammeter, starters, indicators and selector switches etc complete all as specified and as directed.

5

-

-

... More
S & F PVC Line spacer of superior quality of 4 Way spiral type complete all as specified and as directed.

100

-

-

... More
S & F PVC Line spacer of superior quality of 6 Way spiral type complete all as specified and as directed.

60

-

-

... More
M & L for earth continuity conductor /main earthing lead fixed to wall/batten or recess/chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.

30

-

-

... More
M & L for Painting of steel tubular pole 9.0 mtr long, by applying one coat of alluminium paint after scraping / brushing and cleaning the rust on pole and cross arms . Alluminium painting will be done on pole above 1.5 Mtr hight from ground level and balance 1.5 mtr from ground level will be painted by alternate layer of black and white enammelled paint ( 30 cms each) Pole Nos will be written on pole by black paint in yellow circle of 150mm dia complete all as specified and as directed.

12

-

-

... More
M/L for replacement of Earthing complete with GI earth plate 60x60cmx6mm thick electrode and 4mm dia GI wire as earthing lead.burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to GI wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 15 mm dia light grade up to 7.5 mtr length of earth wire,charcoal dust and salt etc and connected to earthing test point all as specified and as directed by Engr-in-charge.

10

-

-

... More
Supply, installing, testing and commissioning in replacement of factory made LT ( 415 Volts, 50 Hz , 3-phase, 4 wire supply ) CPRI approved, factory assembled Outdoor Feeder Pillar type, weather proof, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated Aluminium bus bars of 100 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, ingress protection class ( IP-54 ) and made of 3.15 mm thick CRCA mild steel sheet and mild steel, Angle iron frame work made out of 40 X 40 X 6 mm ), front and rear opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FR wire of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035. embedded in ground with and including bocks of PCC 1:2:4 type B1 of block size 30x30x30 cm comprising of the following:- BUS BAR CHAMBER :- (a) 100 Amps 3 Strips & Neutral Strip 50 Amps, Aluminium conductor, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INCOMING SUPPLY :- (i) MCCB 63 Amps 16 KA 3 Pole with Fixed thermal & magnetic release 415 volts , 50Hz,=01 No., Make of MCCB:-L&T/ Schneider / HPL/ Havells. INSTRUMENT FEEDER :- (a) Digital Volt Meter, 96X96mm, flush type rated 0-500 V, with Volt meter selector switch- 01 Set. (b) Digital Amp Meter, 96X96mm, flush type rated 0-100 A, with Amp meter Selector switch- 01 Set. (c) C.T's 100/5 A CL 1.0 Tape Wound- 01 Set. (Set of three)(d) Red, Yellow, Green Phase indicating Lights LED type 220 V AC- 1 Set. (Set of three).(e) Protection MCB 6 A SP C Series- 1 Set. (Set of three).

5

-

-

... More
Taking out old UNSV Transformer trolly and Material & Labour for fabrication of towing type transformer trolley suitable for 160 KVA to 400 KVA transformer step down, outdoor type 11 KV/433 V of capacity complete made out of MS 'I' beam of size 250mm x 125mm x 6.9mm (37.3 Kg/mtr) and MS sheet for platform 6mm thick, mounted on 4 wheels size of 7.50/OR 16 (including wheel drums, bearings) with rims mounted on 02 Nos front and rear axle wheel with leaf spring clamps cushioning arrangement, between platform and 02 Nos front and rear axles, complete with towing arrangement with tow hook to take full load of trolley and transformer, Jalli (XPM) around platform on angle iron frame of size 40x40x5mm opening arrangement from both side with locking arrangement for loading and unloading of transformer including welding, bending and drilling holes, spray painting with two coats of synthetic enamel paint over a coat of red oxide primer over all surface, complete all as specified and directed by Engineer-in-Charge. (a) Size of the transformer trolley platform shall be 4 Mtr x 2.5 Mtr and sufficient space all around after transformer installation for ventilattion/ maint purpose as recommended by OEM and accomodate HT/ LT connecting cables loops on the platform. (b) The trolley shall be provided with steel square net of suitable guage fixed on angle iron in all around the trolley body with opening arrangement as protection. (c) Necessary provision for PVC insulated heavy duty copper cable multistranded single core 95 sqmm with cable lugs to connect the earting as cut to required length - 50 mtrs. Notes :- (i) Any other works not mentioned in item above but required for smooth functioning of trolley shall be deemed to be included in the rates quoted by the contractor. Note :- The technical drawings and details of schedule 'A' item Nos 30, 31, 32, 78 & 79 shall be submitted for approval by GE before procurement/ fabrication from OEM factory/ workshop.

1

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.