Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Provn Of Certain Sanction Wk In The Area Of Age B/r-i And Age E/m Under Ge (central) Delhi Cantt-10 in New Delhi, Delhi, with an estimated contract value of Rs. 46,75,000. The bid opening date for this tender is 13-11-2026 and the last date for bid submission is 04-12-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - Delhi Tender
Opening Date13 Nov 2026
Closing Date4 Dec 2026
Tender Amount₹ 46,75,000
Costs
EMD
₹ 93,500Document Cost
₹ 500Tender Fee
Refer Documents
Description
Provn Of Certain Sanction Wk In The Area Of Age B/r-i And Age E/m Under Ge (central) Delhi Cantt-10
Contact
Tender Id
2026_MES_798519_1Tender No
GE/TOKEN-103/2026-27Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
M&L for preparation of newly plastered surfaces of walls and providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer
applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge.
250
-
-
... More
M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper complete all as specified.
200
-
-
... More
Dismantling water tanks and removing to store of 1000 Ltr Capacity
1
-
-
... More
M&L for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene balldescription including fitting and fixtures complete all as specified. (ISI Marked)
1
-
-
... More
Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc., all as directed.
10
-
-
... More
M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks, old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed.
12
-
-
... More
Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 complete all as specified and directed.
20
-
-
... More
Dismantling of wall and ceiling/cup board board fibre pulp AC boards etc any thickness including cover fillets removing the wiring
500
-
-
... More
M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles for temp buildings/PMT Bldgs of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners or 3 to 4 mm GI hanging wire for temp Bldg length/ht as per site req ,6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm.Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-incharge.
500
-
-
... More
Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame)
25
-
-
... More
S&F factory made uPVC white colour three track three panels sliding window with flyproof S.S. wiremesh ( Two nos. glazed & one no. wiremesh panels ) upto 1.50m ht made of big series frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 + 0.20mm and single glazing bead/ double glazing beading of appropriate dimension ( Area of window upto 2.0 sqmtr) comprising of uPVC multichambered frame and mullion (wherevr required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropraiate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame & sash shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass and SS wire mesh fixed and drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made
42
-
-
... More
Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame)
18
-
-
... More
S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed.
50
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type Skelton door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item). Note:- Contractor will provide manufacturer test certificate alognwith screw out test certificate.
50
-
-
... More
S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 105x60mm all as specified
20
-
-
... More
S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 165x60mm(double frame)
40
-
-
... More
S&F factory made uPVC white colour three track three panels sliding window with flyproof S.S. wiremesh ( Two nos. glazed & one no. wiremesh panels ) upto 1.50m ht made of big series frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 + 0.20mm and single glazing bead/ double glazing beading of appropriate dimension ( Area of window upto 2.0 sqmtr) comprising of uPVC multichambered frame and mullion (wherevr required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropraiate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame & sash shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass and SS wire mesh fixed and drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made
40
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge
30
-
-
... More
S & F mild steel framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work including aldrop and hinges holdfast etc conforming to Fe 290. Gde-E-165.
300
-
-
... More
S&F MS butt hinges medium weight 100 mm size fixed with MS screws.
60
-
-
... More
S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws.
40
-
-
... More
S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws.
40
-
-
... More
S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut.
40
-
-
... More
S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar all as directed.
18
-
-
... More
M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified
40
-
-
... More
M&L preparation of Old or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified
100
-
-
... More
M & L for preparation of Old or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified
100
-
-
... More
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.
50
-
-
... More
S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste coupling incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
S&F in repairs looking mirror of size 600mmx450mmx5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. Make- Atul/Swastik/Hindustan safety glass works Pvt Ltd.
5
-
-
... More
Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.
103
-
-
... More
S & F for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to 10mm thick (1:4) CM Screed bed
800
-
-
... More
All as per item no. 44 except on vertical surfaces as in skirting etc over 10mm thick backing coat in CM 1:4, set and jointed in white cement with pigment to match all as specified and directed.
70
-
-
... More
M&L for Glazed ceramic tiles in vertical surface 600x 300x 7 mm/ 450X 350X 7mm thick
set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.
100
-
-
... More
M&L for 18-20 mm Granite (any type) work (table rubbed and polished) in steps,jambs,pillars window-cill,cooking platforms and incl 15mm thick screed bed in CM 1:6 using marble dust with admixture in CM (1:4) with pointing and white cement (1:2) of pigment to match with shade of granite all as spd.
10
-
-
... More
M&L for machine cut polished Machine cut Kota stone 20-25mm thick as in floor, tread, riser, pillar fixed with neat cement slurry over backing coat of 20mm thick in CM (1:4) including rubbing and polishing complete all as specified.
50
-
-
... More
Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt
950
-
-
... More
S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
890
-
-
... More
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
100
-
-
... More
Demolition of cement concrete (un-reinforced) as path, paving and any position and any thickness complete all as specified and directed.
7
-
-
... More
M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth , complete all as specified.
100
-
-
... More
M & L for 40 mm thick cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggregate) as in floor & surfaces finished even and fair using extra cement, complete all as specified.
40
-
-
... More
Demolition of reinforced cement concrete in any position all as specified and as directed by Engineer -in-Charge.
2
-
-
... More
Material and labour for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof slabs, slab supported on walls, cooking platform, beams and columns, in floors roofs, landings, balconies, canopies and in chajjas, parapet, shelves and the like complete all as specified and directed.
2
-
-
... More
Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.
50
-
-
... More
S&F TMT steel bars of 10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to. complete all as specified and as directed.
200
-
-
... More
S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed
2
-
-
... More
S&F 25 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed
2
-
-
... More
Demolition and breaking up rain water pipes (CI, AC, PVC etc) set in any cement mortar of any diameter incl bends.
30
-
-
... More
S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears ,110mm bore complete.
20
-
-
... More
S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears 75 mm bore complete.
10
-
-
... More
Supply only for broken brick coarse aggregate n.exc 40mm deposited, spread and levelled in layers watered and rammed to a true surfaces complete all as specified.
20
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for roof trusses and purlins complete all as specified and as directed.
43
-
-
... More
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins , pillars, trusses , water tank stage , framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed
4300
-
-
... More
Surface dressing averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed by Enginer-in-Charge
100
-
-
... More
M&L cement concrete 1:4:8 type D- 2 (40mm graded stone aggregate) as in sub base, hard standing of 75 mm thick, complete all as specified.
100
-
-
... More
M&L for Sand filling (sand cushioning) under floors or in foundations including watering and consolidations complete all as specified and directed.
8
-
-
... More
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors all as directed.
100
-
-
... More
Excavating in post holes each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceedings 25cm watering and removing surplus soil to distance n exc 50 m and making good surfac in soft/loose soils
5
-
-
... More
M&L for PCC 1:3:6 type C-2 (40 mm graded agg) for post holes complete all as specified and dircted.
0.5
-
-
... More
Supply and fixing PVC sheet consisting of 5mm thick light colour PVC sheet inclusive of fixing on PVC frame /Aluminium frame at site etc complete all as specified and as directed by Engineer-in- charge.
15
-
-
... More
S&F powder coated not less than 50micron Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
10
-
-
... More
S&F 4.8 mm thick sheet glass, ordinary quality and glazing in Aluminium door with solar control files 50 micron in any size each pane.
5
-
-
... More
S&Fsteel work as in posts and struts , flats in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
400
-
-
... More
Dismantling and Re-Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standereds, rails, straining blots, etc. incl provn of binding wire.
50
-
-
... More
Supply & Fix chain link MS galvanised fencing any size (50x50mm)or any type complete.
50
-
-
... More
S&F 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with srew.
150
-
-
... More
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
60
-
-
... More
M&L hard core of broken stone of gauge n. exc. 63mm; deposited, spread and levelled in layers n. exc. 15cm thick watered and rammed to true surface complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
M&L 75mm thick PCC (1:3:6) C-1 using 20mm graded stone aggregate as in sub base of floor, plinth protection etc. finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
60
-
-
... More
M&L Endura chequered tiles 30cmx 30cmx 10mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 15mm thick screed in cement mortar 1:6
60
-
-
... More
M&L for Roof trusses (framed), trussed,purlins,post, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc.Fe 410 -W (GdeE- 250) quality A all as specified and directed.
100
-
-
... More
Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc to match the existing surface.
243
-
-
... More
Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed.
6
-
-
... More
Taking down old submain wiring of any size, including coduit and make from the site complete all as specified.
445
-
-
... More
Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified.
88
-
-
... More
M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLSH cable unsheathed 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLSH unsheathed as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified.
-
-
-
... More
All as per item No 80 here -in-before but one light/ fan point controlled by one switch.
145
-
-
... More
All as per item No 80 here -in-before but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board but not below the switch board of light points in same vertical plate..
52
-
-
... More
All as per item No 80 here -in-before but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board
32
-
-
... More
All as per item No 80 one power point controlled by one way switch with 4sqmm copper cable PVC insulated FRLS complete.
2
-
-
... More
M&L point wiring with PVC unsheathed multi stranded copper conductor cable 2.5 sqmm FRLSH 1100 Volts in New PVC concealed conduit medium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 2.5 sqmm FRLSH 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified
22
-
-
... More
M&L switch Modular type 6 Amps one way ISI marked 230V AC complete all as specified Make : Legrand Cat Part No 573400 / Schnider Cat No X1001WH / Wipro Cat No RF 110
221
-
-
... More
M&L Modular socket outlet 5 pin 6 Amp socket 2 module ISI marked complete all as specified Make : Legrand Cat Part No 573424/ /Schnider Cat No X2005WHNS/ Wipro Cat No R 1212
84
-
-
... More
M&L switch Modular type 16 Amps one way ISI marked 230V AC complete all as specified Make : Legrand Cat Part No 573410/ Schnider Cat No X11001WH/ Wipro Cat No RF 130
22
-
-
... More
M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified Make : Legrand Cat Part No 573471/ Schnider Cat No X2106WH/Wipro Cat No R 1332P
22
-
-
... More
M&L ceiling rose PVC polycorbonate,isolated body. complete all as specified.
83
-
-
... More
M&L for submain wiring with two single core PVC insulated FRLSH 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLSH 1100 volts unsheathed stranded copper conuctor cable of 6 Sqmm size stranded conductor as earthwire.Note:- for item No 87 & 88 : Two run of main wire PVC insulated FRLSH 1100 volts unsheathed stranded copper conductor and one run of earth wire with one run of PVC conduit will be measured and paid in one length.
180
-
-
... More
M&L for submain wiring with two single core PVC insulated FRLSH 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLSH 1100 volts unsheathed stranded copper conuctor cable of 4.0 Sqmm size stranded conductor as earthwire
265
-
-
... More
M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed
2
-
-
... More
Supply & fix in repair factory made epoxy powder coated Distribution Board VTPN-4 ways (IP-30 protection), mechanical impact strength IK - 07, with cement spill protector double door fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB 100 to 160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified Note :- MCCB & MCB will be measured & paid separately.
1
-
-
... More
M&L in replacement MCCB 100 Amps, 415 volts, 16 KA , 4P, optium 2.0 adjustable thermal setting Ics=100% Icu as per IEC 60947-II suitable for isolation , fixed over load and fixed short sircuit setting complete all as soecified & as directed
1
-
-
... More
S & F in replacement sheet metal enclosure distribution board confirming to IEC - 61439-3, single pole and neutral, AC 240 volts, 12 way witn 100 Amps rated copper bus bar and metal double door with IP-30 & IK 07 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete ( Note - MCB & DB shall be of same make)
4
-
-
... More
S & F in replacement MCB confirming to ISI/IEC -60898-1 (2002), SPN, AC, 240 volts, of 40 Amps capacity "B " curve, 10 kA breaking capacity & making connection by using using suitable copperr lugs complete all as specified.
4
-
-
... More
S & F in replacement MCB confirming to ISI/IEC -60898-1 (2002), SP, AC, 240 volts, of 6-32 Amps capacity "B " curve, 10 kA breaking capacity & making connection by using using suitable copperr lugs complete all as specified.
52
-
-
... More
Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.
30
-
-
... More
Supply and fix LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.
6
-
-
... More
Supply and fix 35/40 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the uminaire level > 100 Lumens/watt at L70. The color temperature is around 5700 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 150-270V, THD<20%, High and low protection along with a surge protection of 2.5 KV including provision of suitable dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on bldg fixed complete
8
-
-
... More
Supply and fix 10 watts bulkhead fitting including LED bulb 10 watts with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W at L70 criteria, Power Factor >0.90, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-5700K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete.
6
-
-
... More
Taking down carefully the existing ceiling fan of 1200mm from its position after disconnecting electric connection and deposits in MES Store all as specified and directed.
28
-
-
... More
Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by BLDC technology, BEE 5 star rating for energy saving, down rod, electonic regulators, fan canopy, remote of ceiling fan & all accessories, rated Air delivery >220 cum/min, service valve > 6, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed.
28
-
-
... More
S& F in replacement recessed mounting LED FLAT panel 2'x2' made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20, System level efficacy of the Luminary is > 100 lm/W at L70 criteria, Power Factor >0.90, driver with Voltage range 150-270V, Suitable for 36 watt, 230 volts, 50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed.
38
-
-
... More
Supply & Fixing in replacement modular mini AC box with MCB 20 Amp complete with metal box and 3 Pin, 15 Amps plug top complete all as specified and directed. Make : Indo Asian/Havells/Legrand/ABB Note : Rates are inclusive of cutting / chases for mounting Modular metal box concealed in wall and making good to the disturbed surfaces with OBD / colour wash / white wash and wall putty where ever is required.
12
-
-
... More
S&F exhaust fans AC single phase 230/240 V, 50 Hz of size 450 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with blade, frame & louvers for fixing of exhaust fan complete.
3
-
-
... More
S&F fresh air fan PVC body, air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete.
8
-
-
... More
Taking down carefully the existing Exhaust fan of any size from its position after disconnecting electric connection & deposited to MES store yard all as specified and directed.
3
-
-
... More
Taking down carefully the existing Wall fan & fresh air fan of any size from its position after disconnecting electric connection & deposited to MES store yard all as specified and directed.
18
-
-
... More
S & F wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Taking down carefully the existing waterr hrate of any size from its position after disconnecting electric connection & deposited to MES store yard all as specified and directed.
8
-
-
... More
S & F water heater storage type Geyser vertical type with suitable size of fastner and, copper inner tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braided pipe og size 15 x 60 mm long with brass adopter for inlet and outlet water connection having adjustable knob for temperature control , digitial display for showing the temperature of geysers and inner tank should be glass line coated, capacity 50 Ltrs, having heating element 2.0 KW with ISI marked suitable for hot and cold water and not less than 5 star rating, suitable for ,230 volt, 50 Hz electric supply complete all as specified and directed.
8
-
-
... More
Supply and fixing and connecting LED post top light die cast aluminium housing spigot, powder coated top cover opal PC diffuser having IP 65 protection complete of 45/50 watt LED 100Lm/watt including including PCC of suitable ratio for grouting/fixing of light fittings and making necessary electrical connections with suitable size copper multistranded cable of suitable size but not less than 1.5 sqmm copper multistranded cable and testing after completion upto entire satisfaction of Engr-in-Charge.
2
-
-
... More
Supply and fixing LED bollard light aluminium extrusion, opal, polycarbonate diffuser for spot and glare free lighting of suitable height not less than 1000mm having IP 65 protection complete not less than15 watt including PCC of suitable ratio for grouting/fixing of light fittings including necessarty excavation and earth work, returning, refilling of excavated soil and making necessary electrical connections with suitable size copper multistranded cable of suitable size but not less than 1.5 sqmm copper multistranded cable and testing after completion upto entire satisfaction of Engr-in-Charge.
16
-
-
... More
S&F in repair twin core cable 6 Sqmm PVC insulated heavy duty 1100 volts grade, aluminium conductor drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories including burial in ground as required depth as directed at site and returning ,filling and removal of surplus soil all as specified and directed.
250
-
-
... More
S&F switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge.
8
-
-
... More
S&F switch Modular type 16 Amps 1 Way,1 module, 230V AC complete all as specified and directed.
2
-
-
... More
S&F Modular socket outlet 6A/16 Amp 2/3 pin 2 module complete all as specified and directed.
2
-
-
... More
Supply and fix wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord (two) system complete all as specified and directed.
2
-
-
... More
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
4
-
-
... More
M&L for breaking old existing wall and making a provn for fixing of 1050 cum/hr Electric Chimany pipe including making good to the disturbed wall/ portion and matching with existing colour.all as specified and directed.
1
-
-
... More
Supply and Fixing wall mounted angular Electric chimney black colour of suction power not less than 1050 Cum/Hr,Al casette with stainless steel outer layer ,touch control panel,3 speed motor with 250 watt with decorative smart cooker hood SS and glass ,energy efficent Led light with digital display , including ducting not less than 12 feet as per site required complete all as specified and as directed.
1
-
-
... More
Supply,installation, testing and commissioning instant electric water heater with heating element of capacity 3 ltrs complete with all accessories such as safety valve, thermostat, NRV, connection piece etc and connecting with water mixture complete with all other accessories reqd including making necessary electric and water connectios from existing source including all materials required for the completion of job and testing on completion all as directed at site upto entire satisfaction of Engr-inCharge.
1
-
-
... More
M&L tube light grade galvanised with fittings complete to walls and ceiling or laid in floors 40mm dia.
10
-
-
... More
Schedule of Credit
-
-
-219404

