Military Engineer Services Tender

M&L for rendering 10mm thick on brick or concrete surfaces or surface other than fair face of brickwork in cement mortar (1:6) and finished even and smooth without using extra cement.

M&L for rendering 15mm thick on brick or concrete surfaces or surface other than fair face of brickwork in cement mortar (1:4) and finished even and smooth without using extra cement.

M&L for applying two coat of oil bound distemper over one coat of primer on new surfaces including sand papering the puttied surfaces to form an even and smooth surface, using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note -: The work pertaining to periodical services shall be executed by authorized applicator of manufacturer of paints proposed to be used by the contractor and approved by Garrison Engineer.

M&L for applying two coats of weather proof exterior emulsion paint on old surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure.

Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing and removing rubbish off the premises (outside MD land)

M&L for light shade Vitrified ceramic coloured tiles 10mm thick(Square / rectangular ) polished area of each tile not exc 0.36 sqm in floors etc. set & jointed in neat cement slurry and pointed in white cement to match over 15mm thick screed bed in cement mortar (1:6), complete all as per specified.

M&L for light shade vitrified ceramic coloured tiles 10mm thick(square / rectangular ) polished area of each tile not exc 0.36 sqm in skirting or dado etc. set & jointed in neat cement slurry and pointed in white cement to match over 10mm thick rendering in cement mortar (1:4), complete all as per specified.

M&L for marble baroda green 18 to 20mm thick (table rubbed and polishing) as in skirting/dado/ window cills/ jambs, vertical surface over cement rendering and jointed with grey cement,over and including screed bed of 15mm thick in cement mortar (1:4) ,including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of marble and making nosing at right angle corner as directed.

Dismantling plain or corrugated steel sheeting/AC/ Fibre reinforced, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with screw as specified and as directed

S&F of pre-painted galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with screw as specified and as directed

S&F of 32 mm MS pipe powder coated as in curtain rod etc complete all as specified and as directed.

S&F of brackets ,knobes etc. for curtain rod complete all as specified and as directed.

Dismantling wall/celling board/ Aluminium Partition any thickness, including cover fillets.

S&F of Gl frame work for ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hanger 4mm dia (upto 1200mm lenth)made out of GI flat 40x3mm size of 60cm long with expansion hold fastener 12.5mm dia 40mm long complete all as specified and directed.

M&L for HSPC non asbestos fibre cement building boards 4mm thick, preprimed, self embossed fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and as directed.

S&F of solid PVC Wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specd and directed.

S&F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specd and directed.

Taking down chowkats exc 1.5sqm and n.exc 4 sqm each with shutters (without taking off shutters from the chowkats or frames)

-ditto- same as above item No-22 but n.exc 1.5 sqm

Providing and fixing factory made uPVC white colour sliding window three track (area exceeding 2.00 Sqm each) made of extruded profiles with wall thickness of 2.3mm (+ - 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm X 52mm), sliding sash 42mm x 67mm. Sliding mesh sash 42mm x 57mm sliding interlock one vertical length in each shutter 45.5mm x 28mm, Glazing bead 24.5mm x 16mm will be mitred cut and fusion welded at all corners including 5.5mm thick glass including drilling of holes fo fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket, 1.2 + -0.2mm thick galvanised steel frame 30mm x 18mm 2 nos, sliding sash 30mm x 18mm, sliding mesh sash 26mm x 10mm profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware touch lock of zink alloyed white powder coated steel roller system, stainless stee wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and required accessories.

S&F of powder coated aluminium door shutters, aluminium section weighting 0.55 kg/m including necessary jointing cleats, glazing clips, rebber neroprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as speciifed.

M&L for sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F of factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directed.

S&F of factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64mm & sash 67 x 110mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality including 6mm thick glass & wiremess complete all as specified and directed by Engineer-inCharge. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Dismantling wooden framed trusses N.exc 10mtr and over in section, in any required.

S&F of rolled ms work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc embedded in concrete and similar work con- forming to Fe.290.Gde-E-165 at any height including necessary scaffolding complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified incl all necessary scaffolding etc.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish out of Defence land complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type c-2 as in plinth protection.

M&L for PCC 1:2:4 (20mm graded stone aggregate) as in copings etc. incl necessary formwork complete all as specified and directed.