Land Ports Authority Of India Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Land Ports Authority Of India - LPAI Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date5 Jul 2019
Closing Date15 Jul 2019
Tender Amount₹ 1,50,00,00,000
Costs
EMD
₹ 1,50,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_LPAI_483209_1Bid Award Id
ViewTender No
07/Tender/LPAI/2019Tender Authority
Land Ports Authority Of India ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
1394.17
-
-
Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated or stacked materials.-- All kinds of soil
385
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
262.31
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
991.34
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
176.35
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
1748.7
-
-
Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).
167.35
-
-
1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)
174.87
-
-
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5 mm nominal size).
222.95
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.
1748
-
-
Reinforced Cement Concrete Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete.
900.72
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform.
4591.97
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
3621.83
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts.
2440.44
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases
147.02
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more
134000
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more
358084.4
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level.
1331.98
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level.
2027.07
-
-
Brick Work
-
-
-
Brick work with F.P.S. bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
763.82
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
1604.43
-
-
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
1604.43
-
-
Marble & Granite Work
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade-Area of slab over 0.50 sqm.
41.35
-
-
Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.
28.31
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
48
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps
633.76
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type- Fastener with threaded dia 10 mm
6467
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
10.08
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions ofthe building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
3627.95
-
-
Wood and PVC Work
-
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
101
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 300x10 mm
30
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 250x10 mm
101
-
-
Steel Work
-
-
-
Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes
31476.6
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
3708.36
-
-
Flooring
-
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
1357.86
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
2558.48
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
849.67
-
-
Roofing
-
-
-
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
372
-
-
Finishing
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
3793.64
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
4337.02
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
8130.65
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats
4271.97
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
275
-
-
Aluminium work
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
20522.07
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
5538.92
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
950.22
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
1233.53
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- charge. With stainless steel cover plate minimum 1.25 mm thickness
29
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
1034.8
-
-
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
61
-
-
Providing fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminium
127
-
-
Water Proofing
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
153.6
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
1909.51
-
-
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 110 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs
-
-
-
c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
-
-
-
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
New Technologies and Materials
-
-
-
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size
4604.97
-
-
600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto
-
-
-
1000 mm length and L shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6)
-
-
-
Non-Scheduled Items
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
1616.73
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
1781.65
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
964.5
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
311.28
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):Toughened glass 12 mm thickness
21.11
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
324
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
648
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
265.8
-
-
Finishing walls with textured interior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
1835.19
-
-
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in Charge) - The sheets shall have total coated thickness (TCT) of 0.50 mm with Zinc Aluminium Alloy of AZ- 150 (as per AS 1397-1993) yield strength of 550MPA. The sheets shall have a hot dip metallic Zinc- Aluminium Alloy coating of Zn- 45% and Al- 55% with total mass coating of 150 gsm/sqm on both sides. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge.The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
706.5
-
-
Cargo Terminal Building
-
-
-
Earth work
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil
1129.1
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
680.4
-
-
Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated or stacked materials.-- All kinds of soil
1640
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
144.33
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
551.52
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
150.76
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
962.2
-
-
Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).
72.1
-
-
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5 mm nominal size).
105.21
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as manufactures specification.
27
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.
105.21
-
-
Reinforced Cement Concrete Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete.
963
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform.
728
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
2379.58
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts.
1373.3
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases
1322.96
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more
31100
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more
115000
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level.
408
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level.
639
-
-
Brick Work
-
-
-
Brick work with F.P.S. bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
369.5
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
256.6
-
-
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
256.6
-
-
Marble & Granite Work
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade-Area of slab over 0.50 sqm.
11.4
-
-
Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.
18.96
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
11
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps
226
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type- Fastener with threaded dia 10 mm
2305
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
11
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions ofthe building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
710.2
-
-
Wood and PVC Work
-
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
41
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 300x10 mm
41
-
-
Steel Work
-
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
234
-
-
Flooring
-
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
256.5
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
1579.5
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
68
-
-
Roofing
-
-
-
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
243.4
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
14
-
-
Finishing
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
1096.6
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
1247.34
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
2343.93
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats
607
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
791.7
-
-
Aluminium work
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
5355.1
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
1943.9
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
171.2
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
428.7
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- charge. With stainless steel cover plate minimum 1.25 mm thickness
16
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
419
-
-
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
41
-
-
Providing fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminium
41
-
-
Water Proofing
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
46.85
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
1116.4
-
-
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 110 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs
-
-
-
c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
-
-
-
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
New Technologies and Materials
-
-
-
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm
1850.3
-
-
suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’.
-
-
-
The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6)
-
-
-
NON-SCHEDULED ITEMS
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
576.4
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
926.6
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
372.4
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
136.9
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):Toughened glass 12 mm thickness
30.6
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
172
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
342
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
89.8
-
-
QUARANTINE BUILDING
-
-
-
Earth work
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil
1129.1
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
680.4
-
-
Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated or stacked materials.-- All kinds of soil
1640
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
144.3
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
551.5
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
150.8
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
962.2
-
-
Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).
72.1
-
-
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5 mm nominal size).
105.2
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
27
-
-
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
105.2
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.
963
-
-
Reinforced Cement Concrete Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
728
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform.
2379.6
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
1373.3
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts.
1322.96
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights :Stairs, (excluding landings) except spiral-staircases
116
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more
31100
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more
115000
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level.
408.2
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level.
639
-
-
Brick Work
-
-
-
Brick work with F.P.S. bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
369.5
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
256.6
-
-
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
256.6
-
-
Marble & Granite Work
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade-Area of slab over 0.50 sqm.
11.38
-
-
Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.
18.96
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
11
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand),including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately ).Stainless steel cramps
225.94
-
-
Providing and fixing expansion hold fasteners on C.C./R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type Fastener with threaded dia 10 mm
2305
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
11
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
710.2
-
-
Wood and PVC Work
-
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 300x10 mm
41
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
41
-
-
Steel Work
-
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
234
-
-
Flooring
-
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
256.5
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
1579.45
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
68
-
-
Roofing
-
-
-
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
243.4
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
14
-
-
Finishing
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
1096.6
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
1247.34
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
2343.9
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats
607
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
791.7
-
-
Aluminium work
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
5355.1
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
1943.9
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
171.2
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
428.7
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- charge. With stainless steel cover plate minimum 1.25 mm thickness
16
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
419
-
-
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
41
-
-
Providing fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminium
41
-
-
Water Proofing
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
46.9
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
1116.4
-
-
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 110 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs
-
-
-
c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
-
-
-
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
New Technologies and Materials
-
-
-
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of
1850.3
-
-
size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’.
-
-
-
The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6)
-
-
-
NON-SCHEDULED ITEMS
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
576.4
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
926.6
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
372.4
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)
137
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):Toughened glass 12 mm thickness
30.6
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
171
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
342
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
89.8
-
-
WARE HOUSE EXPORT
-
-
-
Earth work
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
858.6
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
111
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
83.6
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
162.6
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
741.3
-
-
Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement: 4 coarse sand (zone III): 8 graded stone aggregate 40 mm nominal size
65.6
-
-
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5 mm nominal size).
39.3
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
370
-
-
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
39.3
-
-
Reinforced Cement Concrete Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
151
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights-Columns, Pillars, Piers, Abutments, Posts and Struts
698
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases.
13.2
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights: Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
62.2
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Edges of slabs and breaks in floors and walls. Under 20 cm wide
7.6
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights :Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
1358.62
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
73050
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
2280
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works upto plinth level
418.4
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level.
37
-
-
Brick Work
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
177.8
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
24.3
-
-
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
24.3
-
-
Marble & Granite Work
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade - Area of slab over 0.50 sqm.
0.7
-
-
Wood and PVC Work
-
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 300x10 mm
8
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
8
-
-
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. - Twin rubber stopper
8
-
-
Steel Work
-
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
24.3
-
-
Providing and fixing ball bearing for rolling shutters.
3
-
-
Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-charge.(area of grill to be measured).
24.3
-
-
Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
324.42
-
-
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
M.S Tube
413.2
-
-
Flooring
-
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
87.5
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
51.35
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
540.6
-
-
Finishing
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
507.3
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
694.7
-
-
15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand)
221.3
-
-
6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand)
54
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
1477
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
572
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
791
-
-
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats
20
-
-
Aluminium work
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of
630.1
-
-
Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately)--- for fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,
450.9
-
-
Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
-
-
-
(Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
-
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
22.6
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
14
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
224.2
-
-
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
10
-
-
Providing fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminium
10
-
-
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
179.6
-
-
Water Proofing
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
16.1
-
-
Non- Schedule Items
-
-
-
Providing and laying burnt clay face brick tiles (as per approved pattern 17-20 mm nominal thickness of 230x75 mm size & of approved make (like Jindal mechno bricks , Pioneer Bricks , Gee Tiles )) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
553.7
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
106.5
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
31.75
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
60
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
120
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
16.7
-
-
Providing & Spreading of Non Metal floor hardener as per BSCP 204,BS 3900 Part R - 4 BS-4204 @ 3 Kg/sqm in floor concrete. ( As per manufactured specification)
1060.7
-
-
Extra for in providing & fixing channel for preparing panels of required size and then vaccume dewatering fresh cement concrete work by levelling with screed vibrators dewatering of excess water through vaccume pump with bottom filter mat and top mat dually sealling the edges around finishes with power floter and power trowel to obtain hard surface with labour, materials,masonary,generator for power supply tools and plants with all lead and lift as per specifications and as directed by Engineer- in- Charge.
1060.7
-
-
Providing & laying polythene sheet below trimix
1060.7
-
-
Design,Manufacture, Supply & Erection of Pre Engineered Building as per following building descriptions :-
Building Descriptions : Building No.2 (Warehouse Export)
Building Type : TCMS (Tampered Column Multi Span) Double Slope
Width : 20.0m O/O of Steel Line
Width Module : 2 @ 10m
Length : 90.0m O/O of Steel Line
Clear Height : 8.0m
Bay Spacing : 12 @ 7.5m
Roof Slope : 1 : 10
Brick Wall : 5.0m high brick wall all around the buildiing by others.
1890
-
-
Mezzanine Floor : 1 No. Mezzanine of 7.5m (W) x 20.0m (L) of the building
considered with joist and decking sheet. Live Load: 400 kg/m2,
Dead Load: 100mm RCC slab
Staircase : 1 No considered.
Roofing : Supertech Single Skin Standing Seam Roof (SS-2000) made out of 0.55mm TCT Bare Galvalume profiled Panel.
Wall : Supertech Single Skin 0.50 mm TCT Hi-Rib Colour Coated Galvalume profiled panels above 5.0m high brick all around the building.
Eave Gutter / Flashing/Downpipe: Matching to roof and wall
Sky Light in roof : 2mm thick Polycarbonate Profiled sheet
Canopy : 1m projection canopy considered all around the building.
Roof Extension : 1m roof extension considered in both side of the building.
-
-
-
List of Inclusions
a) Main frame rafters & columns
b) Mezzanine Beam & Joist (For Building No. 1 & 2)
c) Purlin & girts - Galvanised
d) Steel Connectors
e) Structural hardware including Anchor bolts & templates. (Templates are Supertech’s property
and to be returned back after use)
f) Roofing panels (Single Skin as per description)
g) Wall Cladding / Canopy panels (Single Skin as per description)
h) Eave Gutters and down pipe for Building.
i) Matching flashing, Ridge Cap
j) Sheeting / fixing fasteners. Sealant
k) Skylight : 2mm thick FRP sheet.
l) Decking Sheet : 0.80mm TCT GI sheet considered.
m) Staircase (For Building No. 1 & 2)
n) Steel finish: Factory applied 1 coat of red oxide zinc chromate primer and factory
applied 1 coat of synthetic enamel paint and one coat at site.
-
-
-
charges for getting the building/structural designs approved by RITES for proof checking/vetting by IIT.
1987.7
-
-
WARE HOUSE IMPORT
-
-
-
Earth work
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
1105
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
150
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
107
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
133
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
950.5
-
-
Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement: 4 coarse sand (zone III): 8 graded stone aggregate 40 mm nominal size
84.43
-
-
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5 mm nominal size).
38.5
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
500
-
-
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
38.5
-
-
Reinforced Cement Concrete Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
232.5
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights-Columns, Pillars, Piers, Abutments, Posts and Struts
996.45
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases.
12.5
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights: Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
84.8
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Edges of slabs and breaks in floors and walls. Under 20 cm wide
9.8
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
1745
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
98717
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
2520.5
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works upto plinth level
584.3
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). all work above plinth level upto V level.
59.4
-
-
Add for using extra cement in the items of design mix over and above the specified cement content therein.
106.6
-
-
Brick Work
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
241
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
13.6
-
-
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
13.6
-
-
Marble & Granite Work
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade - Area of slab over 0.50 sqm.
0.7
-
-
Wood and PVC Work
-
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading
73.5
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 300x10 mm
8
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
8
-
-
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. - Twin rubber stopper
8
-
-
Steel Work
-
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
89
-
-
Providing and fixing ball bearing for rolling shutters.
11
-
-
Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-charge.(area of grill to be measured).
88.9
-
-
Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
156
-
-
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
M.S Tube
1160.6
-
-
Flooring
-
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
377.3
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
34.6
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
263.8
-
-
Finishing
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
480.45
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
737.65
-
-
15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand)
271.34
-
-
6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand)
143.2
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
1358.6
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
1153.7
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
177.1
-
-
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats
23.2
-
-
Aluminium work
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of
614.5
-
-
Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately)--- for fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,
415
-
-
Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
-
-
-
(Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
-
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
20
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
73.5
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
321
-
-
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
7
-
-
Providing fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminium
7
-
-
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
183.8
-
-
Water Proofing
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
10.9
-
-
Non-Scheduled Items
-
-
-
Providing and laying burnt clay face brick tiles (as per approved pattern 17-20 mm nominal thickness of 230x75 mm size & of approved make (like Jindal mechno bricks , Pioneer Bricks , Gee Tiles )) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
675
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
147.7
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
32.9
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
63
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
126
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
11
-
-
Providing & Spreading of Non Metal floor hardener as per BSCP 204,BS 3900 Part R - 4 BS-4204 @ 3 Kg/sqm in floor concrete.( As per manufactured specification)
1810.44
-
-
Extra for in providing & fixing channel for preparing panels of required size and then vaccume dewatering fresh cement concrete work by levelling with screed vibrators dewatering of excess water through vaccume pump with bottom filter mat and top mat dually sealling the edges around finishes with power floter and power trowel to obtain hard surface with labour, materials,masonary,generator for power supply tools and plants with all lead and lift as per specifications and as directed by Engineer- in- Charge.
1810.44
-
-
Providing & laying polythene sheet below trimix
1810.44
-
-
Design,Manufacture, Supply & Erection of Pre Engineered Building as per following building descriptions :-
Building Descriptions : Building No.1 (Warehouse Import)
Building Type : TCMS (Tampered Column Multi Span) Double Slope
Width : 20.0m O/O of Steel Line
Width Module : 2 @ 10m
Length : 90.0m O/O of Steel Line
Clear Height : 8.0m
Bay Spacing : 12 @ 7.5m
Roof Slope : 1 : 10
Brick Wall : 5.0m high brick wall all around the buildiing by others.
2181.12
-
-
Mezzanine Floor : 1 No. Mezzanine of 7.5m (W) x 20.0m (L) of the building considered with joist and decking sheet. Live Load: 400 kg/m2,
Dead Load: 100mm RCC slab
Staircase : 1 No considered.
Roofing : Supertech Single Skin Standing Seam Roof (SS-2000) made out of 0.55mm TCT Bare Galvalume profiled Panel.
Wall : Supertech Single Skin 0.50 mm TCT Hi-Rib Colour Coated Galvalume profiled panels above 5.0m high brick all around the building.
Eave Gutter / Flashing/Downpipe: Matching to roof and wall
Sky Light in roof : 2mm thick Polycarbonate Profiled sheet
Canopy : 1m projection canopy considered all around the building.
Roof Extension : 1m roof extension considered in both side of the building.
-
-
-
List of Inclusions
a) Main frame rafters & columns
b) Mezzanine Beam & Joist (For Building No. 1 & 2)
c) Purlin & girts - Galvanised
d) Steel Connectors
e) Structural hardware including Anchor bolts & templates. (Templates are Supertech’s property and to be returned back after use)
f) Roofing panels (Single Skin as per description)
g) Wall Cladding / Canopy panels (Single Skin as per description)
h) Eave Gutters and down pipe for Building.
i) Matching flashing, Ridge Cap
j) Sheeting / fixing fasteners. Sealant
k) Skylight : 2mm thick FRP sheet.
l) Decking Sheet : 0.80mm TCT GI sheet considered.
m) Staircase (For Building No. 1 & 2)
n) Steel finish: Factory applied 1 coat of red oxide zinc chromate primer and factory applied 1 coat of synthetic enamel paint and one coat at site.
-
-
-
charges for getting the building/structural designs approved by RITES for proof checking/vetting by IIT.
2181.12
-
-
PORTER REST AREA
-
-
-
EARTHWORK
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
640
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
314.3
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. - All kinds of soil
40
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
96
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
367
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
107
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
639
-
-
CONCRETE WORK
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).
40
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
43.13
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
11
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
43.13
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
80.25
-
-
REINFORCED CEMENT CONCRETE
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
174.6
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
359
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts.
243.65
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
42720
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
835.31
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
285.3
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level.
3.04
-
-
BRICK WORK
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
70.3
-
-
MARBLE & GRANITE WORK
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade-Area of slab over 0.50 sqm.
18.63
-
-
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
34.5
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps
110
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type- Fastener with threaded dia 10 mm
1118
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
855.43
-
-
STEEL WORKS
-
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
143.7
-
-
FLOORING
-
-
-
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
31.2
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
38.4
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
60.26
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
89.32
-
-
FINISHING
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
332.8
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
332.8
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
129.2
-
-
ALUMINIUM WORK
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately)--- for fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
140
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
130.4
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
20
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
9.2
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
23.5
-
-
Providing fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminium
3
-
-
Non-Scheduled Items
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
280
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
99
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
144.2
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
4.9
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
9
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
18
-
-
Design,manufacture,supply & errection of pre-engineered building as per Building Descriptions : Building No. 3 (Porters rest area)
Building Type : TCCS (Tampered Column Clear Span)Double Slope Width : 17.54m O/O of Steel Line
Length : 37.5m O/O of Steel Line
Clear Height : 4.5m
Bay Spacing : 4 @ 7.5m
Roof Slope : 1 : 10
Brick Wall : N/A, Open all around the building.
Roofing : Supertech Single Skin Standing Seam Roof (SS-2000) made out of
0.55mm TCT Bare Galvalume profiled Panel.
Wall : Supertech Single Skin 0.50 mm TCT Hi-Rib Colour Coated Galvalume profiled panels above 4.5m open all around the building.
Eave Gutter / Flashing/ Downpipe: Matching to roof and wall
Note ;
1. All sides open to remain open.
2. Only rafter depth considered.
3. 1m wide roof projection considered.
750
-
-
Applicable Codes : Indian
Design Loads:-
Roof Live Load : 0.75 kN/m2
Dead Load : 0.15 kN/m2
Wind Speed : 47 m/s
Deflection in Rafter (Vertical) : Span/180
Deflection to Column (Horizontal) : Height/150
Deflection to Purlin (Vertical) : Span/150
-
-
-
List of Inclusions
a) Main frame rafters & columns
b) Mezzanine Beam & Joist (For Building No. 1 & 2)
c) Purlin & girts - Galvanised
d) Steel Connectors
e) Structural hardware including Anchor bolts & templates. (Templates are Supertech’s property and to be returned back after use)
f) Roofing panels (Single Skin as per description)
g) Wall Cladding / Canopy panels (Single Skin as per description)
h) Eave Gutters and down pipe for Building.
i) Matching flashing, Ridge Cap
j) Sheeting / fixing fasteners. Sealant
k) Skylight : 2mm thick FRP sheet.
l) Decking Sheet : 0.80mm TCT GI sheet considered.
m) Staircase (For Building No. 1 & 2)
n) Steel finish: Factory applied 1 coat of red oxide zinc chromate primer and factory applied 1 coat of synthetic enamel paint and one coat at site.
-
-
-
charges for getting the building/structural designs approved by RITES for proof checking/vetting by IIT.
750
-
-
FUMIGATION SHED
-
-
-
EARTH WORK
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by Engineer-in-charge. - All kinds of soil
259
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth,including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kind of soil
-
-
-
Pipes, cables etc, not exceeding 80 mm dia.
50
-
-
Pipes,cables etc.exceeding 80mm dia.but not exceeding 300mm dia.
50
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
150.86
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
60.12
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
28
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. - Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
105
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
24.8
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
184
-
-
CONCRETE WORK
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).
41
-
-
REINFORCED CEMENT CONCRETE WORK
-
-
-
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
62
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
50
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Shelves (Cast in situ)
50
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
156
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts.
85
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
11100
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
368
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).- All works upto plinth level.
92.5
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).- All works above plinth level upto floor V level.
1.5
-
-
Extra for providing richer mixes at all floor levels. Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum) Note:- Excess/less cement over the specified cement content used is payable /recoverable separately
94
-
-
Add for using extra cement in the items of design mix over and above the specified cement content therein.
15
-
-
BRICKWORK
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
2.44
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
28.7
-
-
Marble & Granite Work
-
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately).Stainless steel cramps
100
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Wedge expansion type Fastener with threaded dia 10 mm
400
-
-
STEEL WORK
-
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
40
-
-
Providing and fixing ball bearing for rolling shutters.
8
-
-
Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-charge.(area of grill to be measured).
8
-
-
Extra for providing mechanical device chain and crank operation for operating rolling shutters.
-
-
-
Exceeding 16.80 sqm in area
40
-
-
FLOORING
-
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
82.5
-
-
ROAD & PAVEMENT
-
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin-Charge.60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern.
43.5
-
-
FINISHING
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
136.5
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)
136.5
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
136.5
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
136.5
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats
136.5
-
-
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats
96
-
-
NON-SCHEDULED ITEMS
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
68.25
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
32.8
-
-
Providing and laying 100mm thick factory made cement concrete interlocking paver block of M-50 grade by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer - in - charge.
184
-
-
Design, manufacture, supply & errection of pre-engineered buildings as follow:-
Building Descriptions : Building No. 4 (Fumigation Shed)
Building Type : TCCS (Tampered Column Clear Span) Double Slope
Width : 11.50m O/O of Steel Line
Length : 16.0m O/O of Steel Line
Clear Height : 6.0m
Bay Spacing : 1 @ 5.34m + 1 @ 5.09m + 1 @ 5.34m
Roof Slope : 1 : 10
Brick Wall : 3.0m high brick wall all around the buildiing by others.
Roofing : Supertech Single Skin Standing Seam Roof (SS-2000) made out of 0.55mm TCT Bare Galvalume profiled Panel.
Wall : Supertech Single Skin 0.50 mm TCT Hi-Rib Colour Coated Galvalume profiled panels above 3.0m high brick all around the building.
Eave Gutter / Flashing/Downpipe : Matching to roof and wall
200.74
-
-
Applicable Codes : Indian
Design Loads:-
Roof Live Load : 0.75 kN/m2
Dead Load : 0.15 kN/m2
Wind Speed : 47 m/s
Deflection in Rafter (Vertical) : Span/180
Deflection to Column (Horizontal) : Height/150
Deflection to Purlin (Vertical) : Span/150
-
-
-
List of Inclusions
a) Main frame rafters & columns
b) Mezzanine Beam & Joist (For Building No. 1 & 2)
c) Purlin & girts - Galvanised
d) Steel Connectors
e) Structural hardware including Anchor bolts & templates. (Templates are Supertech’s property and to be returned back after use)
f) Roofing panels (Single Skin as per description)
g) Wall Cladding / Canopy panels (Single Skin as per description)
h) Eave Gutters and down pipe for Building.
i) Matching flashing, Ridge Cap
j) Sheeting / fixing fasteners. Sealant
k) Skylight : 2mm thick FRP sheet.
l) Decking Sheet : 0.80mm TCT GI sheet considered.
m) Staircase (For Building No. 1 & 2)
n) Steel finish: Factory applied 1 coat of red oxide zinc chromate primer and factory applied 1 coat of synthetic enamel paint and one coat at site.
-
-
-
charges for getting the building/structural designs approved by RITES for proof checking/vetting by IIT.
184
-
-
JAWAN BARRACK
-
-
-
Earth work
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil
2711
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
2533
-
-
Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated or stacked materials.-- All kinds of soil
343
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
325
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
1255.5
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1%concentration
463.4
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
2166
-
-
Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement: 4 coarse sand (zone III): 8 graded stone aggregate 40 mm nominal size
178
-
-
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5 mm nominal size).
193
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.
3064
-
-
Reinforced Cement Concrete Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
2454
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform.
5158
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
3854.58
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights-Columns, Pillars, Piers, Abutments, Posts and Struts
2925
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases.
176
-
-
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing with cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.
277
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
88450
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
255243.36
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
1368.77
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
All work above plinth level upto V level
1682.06
-
-
Add for using extra cement in the items of design mix over and above the specified cement content therein.
320.34
-
-
Brick Work
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
3700
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
2115
-
-
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
2115
-
-
Marble & Granite Work
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade-Area of slab over 0.50 sqm.
111.5
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
156.46
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
15
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps
184
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type- Fastener with threaded dia 10 mm
1873
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions ofthe building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
1872.6
-
-
Wood and PVC Work
-
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
178
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 300x10 mm
178
-
-
Steel Work
-
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
826
-
-
Flooring
-
-
-
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
123.3
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
162
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
1505
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
3240
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
161.29
-
-
Roofing
-
-
-
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
570
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete
18
-
-
Finishing
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
725
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
6294
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
7019
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
6294
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
725.4
-
-
Aluminium work
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
6600
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
7450
-
-
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
-
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
238.3
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
868
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- charge. With stainless steel cover plate minimum 1.25 mm thickness
153
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
3681
-
-
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
87
-
-
Providing fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminium
149
-
-
Water Proofing
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
447
-
-
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry
-
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
2058
-
-
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 110 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c)
-
-
-
After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
-
-
-
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
NS ITEMS
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
808
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
2994
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
857.5
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
308
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):Toughened glass 12 mm thickness
68.9
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
760
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
1512
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
487.2
-
-
BARRACKS FOR OFFICERS
-
-
-
Earth work
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil
641
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
682
-
-
Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated or stacked materials.-- All kinds of soil
80
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
81
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
313
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1%concentration
114
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
540
-
-
Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement: 4 coarse sand (zone III): 8 graded stone aggregate 40 mm nominal size
41
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)
54
-
-
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5 mm nominal size).
13
-
-
Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
45
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
18.7
-
-
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
61.01
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.
540
-
-
Reinforced Cement Concrete Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
527
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform.
941.34
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
743.92
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights-Columns, Pillars, Piers, Abutments, Posts and Struts
771
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases.
76
-
-
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing with cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.
95
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
18750
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
65920
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works upto plinth level
230
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
All work above plinth level upto floor V level
303
-
-
Add for using extra cement in the items of design mix over and above the specified cement content therein.
31
-
-
Brick Work
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
411
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
534
-
-
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
534
-
-
Marble & Granite Work
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade-Area of slab over 0.50 sqm.
46
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
14
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps
19
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type- Fastener with threaded dia 10 mm
195
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions ofthe building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
306
-
-
Wood and PVC Work
-
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
44
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 300x10 mm
44
-
-
Steel Work
-
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
135
-
-
Flooring
-
-
-
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
9.2
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
15.88
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
170
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
498
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
42
-
-
Roofing
-
-
-
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
158
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete
9
-
-
Finishing
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
920
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
2220
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
3650
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
2570
-
-
Aluminium work
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
1320
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
1905
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
74
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
95
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
568
-
-
Water Proofing
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
155
-
-
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry
-
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
470
-
-
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 110 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c)
-
-
-
After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
-
-
-
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
NS ITEMS
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
291.54
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
920
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
200
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
47
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):Toughened glass 12 mm thickness
21
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
90
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
180
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
177
-
-
BARRACK FOR SUB ORDINATE OFFICERS
(Earth work)
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by Engineer-in-charge. - All kinds of soil
604
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
570
-
-
Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated or stacked materials.-- All kinds of soil
81
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
51
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
200
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1%concentration
105
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
339
-
-
Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement: 4 coarse sand (zone III): 8 graded stone aggregate 40 mm nominal size
37
-
-
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5 mm nominal size).
55
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
14.8
-
-
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
55
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.
356
-
-
Reinforced Cement Concrete Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
253
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform.
636
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
577
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights-Columns, Pillars, Piers, Abutments, Posts and Struts
660
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases.
35
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
20510
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
49649.71
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
216
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
All work above plinth level upto V level
252
-
-
Brick Work
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
424
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
194
-
-
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
194
-
-
Marble & Granite Work
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade-Area of slab over 0.50 sqm.
10.74
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
17
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps
70
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type- Fastener with threaded dia 10 mm
712
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions ofthe building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
126
-
-
Wood and PVC Work
-
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
57
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 300x10 mm
55
-
-
Steel Work
-
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
218
-
-
Flooring
-
-
-
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
40
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
71
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
280
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
420
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
87
-
-
Roofing
-
-
-
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
154
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete
5
-
-
Finishing
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
1065
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
1990
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
3051
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
1990
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
387
-
-
Aluminium work
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
1017
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
1033
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
91
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
55.5
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- charge. With stainless steel cover plate minimum 1.25 mm thickness
38
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
469
-
-
Water Proofing
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
47
-
-
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry
-
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
427
-
-
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 110 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c)
-
-
-
After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
-
-
-
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
NON-SCHEDULED ITEMS
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
257
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
704
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
201.5
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
24
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):Toughened glass 12 mm thickness
11
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
61
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
125
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
68.63
-
-
SUB-ORDINATE OFFICERS BARRACK
-
-
-
Earth work
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by Engineer-in-charge. - All kinds of soil
604
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
570
-
-
Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated or stacked materials.-- All kinds of soil
81
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
51
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
200
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1%concentration
105
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
339
-
-
Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement: 4 coarse sand (zone III): 8 graded stone aggregate 40 mm nominal size
37
-
-
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5 mm nominal size).
55
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
14.75
-
-
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
55
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.
355.68
-
-
Reinforced Cement Concrete Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
253
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform.
636
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
577
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights-Columns, Pillars, Piers, Abutments, Posts and Struts
660
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases.
35
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
20510
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
49650
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
216
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
All work above plinth level upto V level
252
-
-
Brick Work
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
424
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
194
-
-
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
194
-
-
Marble & Granite Work
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade-Area of slab over 0.50 sqm.
10.74
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
18
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps
70
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type- Fastener with threaded dia 10 mm
712
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions ofthe building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
126
-
-
Wood and PVC Work
-
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
55
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 300x10 mm
55
-
-
Steel Work
-
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
218
-
-
Flooring
-
-
-
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
41.23
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
71
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
280
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
420
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
87
-
-
Roofing
-
-
-
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
154
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete
5
-
-
Finishing
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
1065
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
1990
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
3051
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
1990
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
387
-
-
Aluminium work
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
1017
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
1033
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
91
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
55.5
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- charge. With stainless steel cover plate minimum 1.25 mm thickness
38
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
469
-
-
Water Proofing
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
47
-
-
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry
-
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
427
-
-
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 110 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c)
-
-
-
After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
-
-
-
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
NON-SCHEDULED ITEMS
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
257
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
704
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
201.5
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
24
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):Toughened glass 12 mm thickness
11.25
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
61
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
125
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
68.63
-
-
MAHILLA BARRACK
-
-
-
Earth work
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by Engineer-in-charge. - All kinds of soil
241
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
165.36
-
-
Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated or stacked materials.-- All kinds of soil
31.04
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
28.17
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
108
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1%concentration
77
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
357
-
-
Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement: 4 coarse sand (zone III): 8 graded stone aggregate 40 mm nominal size
15.5
-
-
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5 mm nominal size).
25
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
6.8
-
-
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
26.14
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.
190.66
-
-
Reinforced Cement Concrete Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
115
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform.
361
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
297
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights-Columns, Pillars, Piers, Abutments, Posts and Struts
388
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases.
33
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
7180
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
20246
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
68
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
All work above plinth level upto V level
131
-
-
Brick Work
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
193
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
94
-
-
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
94
-
-
Marble & Granite Work
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade-Area of slab over 0.50 sqm.
9.87
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
14
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps
54.85
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type- Fastener with threaded dia 10 mm
533
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions ofthe building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
82.4
-
-
Wood and PVC Work
-
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
21
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 300x10 mm
17
-
-
Steel Work
-
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
154
-
-
Flooring
-
-
-
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
8.93
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
14.72
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
146
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
57
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
10.55
-
-
Roofing
-
-
-
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
99
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete
5
-
-
Finishing
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
490
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
1236
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
1725
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
1240
-
-
Aluminium work
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
982
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
710
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
25.5
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
94
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- charge. With stainless steel cover plate minimum 1.25 mm thickness
8
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
352
-
-
Water Proofing
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
2.27
-
-
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry
-
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
275
-
-
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 110 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c)
-
-
-
After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
-
-
-
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
NON-SCHEDULED ITEMS
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
191
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
261
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
74
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
40
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):Toughened glass 12 mm thickness
11
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
267
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
535
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
35
-
-
RESTROOM
-
-
-
EARTHWORK
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by Engineer-in-charge. - All kinds of soil
112
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth,including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc, not exceeding 80 mm dia.
70
-
-
Pipes,cables etc.exceeding 80mm dia.but not exceeding 300mm dia.
70
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. All kinds of soil
13
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
19
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. - Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
77
-
-
Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
47.04
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
128.31
-
-
CONCRETE WORK
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).
10.6
-
-
1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).
17.4
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
17.4
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
4.52
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
17.4
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
122
-
-
Reinforced Cement Concrete Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
104
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform.
230.19
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
73.74
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts.
96
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
2900
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
5110
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).- All works upto plinth level.
29
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).- All works above plinth level upto floor V level.
50
-
-
Extra for providing richer mixes at all floor levels. Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum) Note:- Excess/less cement over the specified cement content used is payable /recoverable separately
105
-
-
Add for using extra cement in the items of design mix over and above the specified cement content therein.
11
-
-
BRICK WORK
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
40
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floorV level. Cement mortar 1:4 (1 cement :4 coarse sand)
90
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
90
-
-
MARBLE & GRANITE WORK
-
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
8.4
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
11.55
-
-
WOOD & PVC WORK
-
-
-
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors,windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
7.94
-
-
FLOORING
-
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
204
-
-
ROOFING
-
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
3.15
-
-
FINISHING
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
117
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)
81
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
295.04
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
200
-
-
Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm)
81
-
-
ALUMINIUM WORK
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extrude built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
148
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
159
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass /stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
14.7
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
6.3
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
102
-
-
WATER PROOFING
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
13.86
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed Code Description Unit Rate No. SUB HEAD : 22.0 WATER PROOFING 383 with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
123
-
-
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
Non-Schedule Items
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
21.17
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
139
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
31
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)
6.95
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
122.5
-
-
ELECTRIC SUBSTATION.
-
-
-
EARTHWORK
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by Engineer-in-charge. - All kinds of soil
221
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth,including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc, not exceeding 80 mm dia.
100
-
-
Pipes,cables etc.exceeding 80mm dia.but not exceeding 300mm dia.
100
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. All kinds of soil
26
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
36
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. - Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
139
-
-
Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
62
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
237
-
-
CONCRETE WORK
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).
14.3
-
-
1:5:10 (1 Cement : 5 coarse sand (zone-III) : 10 graded stone aggregate 40 mm nominal size).
24
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
23.1
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
6
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
23.1
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
46.3
-
-
Reinforced Cement Concrete Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
54
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform.
247
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
270
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts.
270
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
5870
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
14362
-
-
Providing and fixing sheet covering over expansion joints with iron screws as per design. -Fibre cement board 6 mm thick as per IS:14862 :200mm wide
250
-
-
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
60
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).- All works upto plinth level.
73
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).- All works above plinth level upto floor V level.
96
-
-
Extra for providing richer mixes at all floor levels.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum) Note:- Excess/less cement over the specified cement content used is payable /recoverable separately
81
-
-
Add for using extra cement in the items of design mix over and above the specified cement content therein.
18
-
-
BRICK WORK
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
11.3
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
82
-
-
MARBLE & GRANITE WORK
-
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand),including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps
16.5
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type Fastener with threaded dia 10 mm
166
-
-
WOOD & PVC WORK
-
-
-
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors,windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
20
-
-
STEEL WORK
-
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
32.5
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.- In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
2852
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
280
-
-
FLOORING
-
-
-
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
221
-
-
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement.
18 mm thick
8.25
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
22.7
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
10.7
-
-
ROOFING
-
-
-
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
24
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
6
-
-
FINISHING
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
676
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)
124
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
800
-
-
Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm)
374
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
574
-
-
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats
33
-
-
ALUMINIUM WORK
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extrude built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
143
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass /stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge.
Pre-laminated particle board with decorative lamination on both sides
8
-
-
WATER PROOFING
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
6.3
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs,
balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed Code Description Unit Rate
No. SUB HEAD : 22.0 WATER PROOFING 383
with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
238
-
-
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
Non-Schedule Items
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
55.5
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
250
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
112
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
8.5
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
21
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
42
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
6.3
-
-
PUMP HOUSE
-
-
-
Earth work
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by Engineer-in-charge. - All kinds of soil
174.78
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
5.83
-
-
Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre
44.06
-
-
Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
36.75
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
68.5
-
-
Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
12.27
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).
5.33
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
1.39
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
5.33
-
-
Reinforced Concrete Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
287
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.
145
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers
48
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts
56
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
6592
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
9714
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
49.44
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level
70
-
-
Brick Work
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
41.57
-
-
Steel Work
-
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
80x1.25 mm M.S. laths with 1.25 mm thick top cover
8.51
-
-
Flooring
-
-
-
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
67
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. -Size of Tile 600x600 mm
70
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
64
-
-
ROOFING
-
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
8.4
-
-
Finishing
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
128
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)
10.36
-
-
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
10.36
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
140
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
187
-
-
DRAINAGE
-
-
-
Supplying and fixing C.I. cover without frame for manholes : 455 x 610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg
6.3
-
-
Aluminium Work
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
49
-
-
Water Proofing
-
-
-
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of :
(i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement :3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound.
(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions.
(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. Using rough kota stone.
71.87
-
-
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge :
Using rough Kota stone
64
-
-
Non-Scheduled Items
-
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
130
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
8.58
-
-
WATCH TOWER
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
54
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
39
-
-
Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated or stacked materials.-- All kinds of soil
7.39
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
4.04
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement: 4 coarse sand (zone III): 8 graded stone aggregate 40 mm nominal size
3.17
-
-
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5 mm nominal size).
5.86
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.
26.9
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
54
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
29.95
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform.
56.87
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
59.25
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights-Columns, Pillars, Piers, Abutments, Posts and Struts
150.37
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases.
16.63
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights: Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
1.58
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Edges of slabs and breaks in floors and walls. Under 20 cm wide
2.36
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
2058
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
4700
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level.
15.6
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level.
30.88
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
16.97
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
146.88
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
23.1
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
16.6
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
74
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
154.92
-
-
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
77.46
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
74
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
74
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size,
65
-
-
including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing
55
-
-
and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
-
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
4.33
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
-
-
-
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
6.8
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
-
-
-
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 110 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c)
12.47
-
-
After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
-
-
-
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
Non-Scheduled Items
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
11.07
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
139
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
18.43
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
2.81
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
6
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
12
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
4.63
-
-
ENTRANCE GATE
-
-
-
Earthwork
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by Engineer-in-charge. - All kinds of soil
494
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
227
-
-
Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated or stacked materials.-- All kinds of soil
62
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
23.1
-
-
Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre
96
-
-
Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
93.5
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
154
-
-
Cement Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).
28.5
-
-
1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).
15.5
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
37
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
5.25
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
37
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.
360
-
-
Reinforced Cement Concrete
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
298
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform.
236
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
339
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts.
628
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights :Stairs, (excluding landings) except spiral-staircases
58
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
18570
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
44980
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).- All works upto plinth level.
239
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).- All works above plinth level upto floor V level.
224
-
-
Brick Work
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
178
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floorV level. Cement mortar 1:4 (1 cement :4 coarse sand)
164
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
164
-
-
Marble & Granite
-
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps
44
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type- Fastener with threaded dia 10 mm
392
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions ofthe building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
38
-
-
Steel works
-
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
6220
-
-
Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes
6160
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
99
-
-
Flooring
-
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
37
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
309
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm
15.35
-
-
Finishing
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
971
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
971
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
971
-
-
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats
224
-
-
Aluminium Work
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately)--- for fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
1472
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
945
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
32
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
157
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
380
-
-
Providing fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminium
17
-
-
Water Proofing
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
96
-
-
NON-SCHEDULED ITEMS
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
140
-
-
Providing and laying brick tiles (as per approved pattern 17-20 mm nominal thickness of approved size & of approved brand like jindal mechno bricks , pioneer bricks, gee tiles ) on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.
263
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).
154
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
80
-
-
Providing and fixing locking arrangement in aluminium sliding window.(Lock- Zinc body, hook & brackets matching with window colour)
78
-
-
Providing and fixing bearing with brackets in aluminium sliding windows with crack proof wheel heavy duty.
156
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
54
-
-
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in Charge) - The sheets shall have total coated thickness (TCT) of 0.50 mm with Zinc Aluminium Alloy of AZ- 150 (as per AS 1397-1993) yield strength of 550MPA. The sheets shall have a hot dip metallic Zinc- Aluminium Alloy coating of Zn- 45% and Al- 55% with total mass coating of 150 gsm/sqm on both sides. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
350
-
-
OVER HEAD WATER TANK
-
-
-
Earth work
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
-
-
-
All kinds of soil
268
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
137
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
All kinds of soil
48
-
-
Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).
15
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
1155
-
-
RCC WORK
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
38.4
-
-
Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.
231
-
-
Suspended floors, roofs, landings, balconies and access platform
42
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
194.6
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
232.4
-
-
Stairs, (excluding landings) except spiral-staircases
15.4
-
-
Arches, domes, vaults up to 6 m span
71.4
-
-
Extra for arches, domes, vaults exceeding 6 m span
71.4
-
-
Extra for shuttering in circular work (20% of respective centering and shuttering items)
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
7.7
-
-
Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.
231
-
-
Suspended floors, roofs, landings, balconies and access platform
42
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
194.6
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
232.4
-
-
Stairs, (excluding landings) except spiral-staircases
15.4
-
-
Arches, domes, vaults up to 6 m span
71.4
-
-
Edges of slabs and breaks in floors and walls
-
-
-
Under 20 cm wide
77.7
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
-
-
-
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
700
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
14040
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
34000
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).
-
-
-
All works upto plinth level
117
-
-
All works above plinth level upto floor V level
170
-
-
Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof.
90
-
-
STEEL WORK
-
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
3115
-
-
FLOORING WORK
-
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete
-
-
-
40 mm thick with 20 mm nominal size stone aggregate
21
-
-
FINISHING
-
-
-
20 mm cement plaster of mix :
-
-
-
1:4 (1 cement: 4 coarse sand)
910
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
-
-
-
Water thinnable cement primer
700
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
-
-
-
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
700
-
-
WATER SUPPLY
-
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
40
-
-
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :
-
-
-
150 mm dia Ductile Iron Class K-7 pipes
90
-
-
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 :
-
-
-
Up to 600 mm dia
20
-
-
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket :
-
-
-
150 mm dia pipes
60
-
-
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :
-
-
-
150 mm diameter
-
-
-
Class II
3
-
-
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
-
Disinfecting C.I. water mains by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory.
-
-
-
150 mm diameter C.I. pipe
0.9
-
-
ELECTRICAL WORK
-
-
-
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required
1
-
-
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/sweating and soldering etc. as required
150
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For horizontal run)
55
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet oron surface of wall for lightning conductor complete as required.(For vertical run)
60
-
-
Providing and fixing testing joint, made of 20 mm X 3 mm thickG.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chucknuts and spring washers etc. complete as required.
1
-
-
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in caseof surface conduit, or cutting the wall and making good the samein case of recessed conduit as required.
-
-
-
32mm
130
-
-
50mm
6
-
-
Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired.
-
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
130
-
-
Providing and laying G.I. tape 32 mm X 6 mm from earth electrodedirectly in ground as required.
20
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mmthick including accessories, and providing masonry enclosurewith cover plate having locking arrangement and watering pipeof 2.7 meter long etc. with charcoal/ coke and salt as required.
1
-
-
Providing and fixing 25 mm X 5 mm copper strip in 40 mm diaG.I. pipe from earth electrode including connection with brassnut, bolt, spring, washer excavation and re-filling etc. as required.
15
-
-
Providing and fixing 25 mm X 5 mm copper strip on surface orin recess for connections etc. as required.
20
-
-
Supplying and fixing DP sheet steel enclosure on surface/recess along with 25/32 A, 240 V “C” curve DP MCB completewith connections, testing and commissioning etc. as required
1
-
-
NON SCHEDULE ITEM
-
-
-
Supply, installation, testing and commissioning of 60Watt single LED aviation light fixtureat over head tank as shown in the drawing and making connection interconnection as required.
3
-
-
Supply, installation, testing and commissioning of 60Watt double GLS aviation light fixtureat over head tank as shown in the drawing andmaking connection interconnection as required.
1
-
-
Providing and installing water level indicator gauge duly painted & marking of level with pulley and rope suitable height arrangement, etc complete job
1
-
-
URINAL BLOCK
-
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
5.1
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement: 4 coarse sand (zone III): 8 graded stone aggregate 40 mm nominal size
3.4
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
6.6
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
28.6
-
-
Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
34
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
28.6
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
28.6
-
-
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
28.6
-
-
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
68
-
-
Supplying and stacking at site. Good earth
68
-
-
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls
and floors wherever required :
2
-
-
CHAIN-LINK FENCING
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
337
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cvement: 2 coarse sand (zone III): 4 graded stone aggregate 40 mm nominal size
337
-
-
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
55270
-
-
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats
2020
-
-
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
2990
-
-
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.Made of G.I. wire of dia 4 mm
5970
-
-
NS ITEM
-
-
-
Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 60x60x 75 cm of mix 1:2:4(1 cement:2 fine sand : 4 graded stone aggregate 40 mm nominal size), every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 60x60x75 cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded steel wire fabric, painting, earth work in excavation and concrete to be paid for separately).
5970
-
-
INTERNAL PLUMBING WORK
-
-
-
SANITARY INSTALLATION
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
105
-
-
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
69
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : (For Rest Room)
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
27
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
Kitchen sink with drain board
-
-
-
510x1040 mm bowl depth 225 mm
14
-
-
Kitchen sink without drain board
-
-
-
470x420 mm bowl depth 178 mm
13
-
-
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :
-
-
-
Size 600x450x200 mm
2
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
15 mm nominal bore
238
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931:
-
-
-
15 mm nominal bore
676
-
-
Providing and fixing toilet paper holder :
-
-
-
C.P. brass
87
-
-
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer- in-charge.
422
-
-
Total of DSR Items C/f to Summary
-
-
-
Providing & Fixing white glazed vitreous china wash basin with, 32mm C.P. brass waste of standard pattern complete including cutting and making good the wall and sealing the sleeves as required including fixing on brackets.
-
-
-
Ovel wash basin
45
-
-
Under Counter wash basin
194
-
-
Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
70
-
-
Providivg and Fixing of 15mm dia. Self closing type C.P. brass pillar tap for wash basin, including cutting and making good the walls wherever required.
224
-
-
Providivg and Fixing of 15mm dia. Self closing type C.P. brass bib cocks with wall flanges for washing area, including cutting and making good the walls wherever required.
33
-
-
Providing and fixing counter mounting/basin mounting CP brass single lever basin mixer Swivel spout pop-up waste including 450mm long copper pipes and brass nuts.
21
-
-
Providing, fixing & testing and commissioning of white viterous china large half stall urinal including providing & fixing CI / MS bracket (duly painted with 2 coats of paints over a coat of primer), including 32mm dia CP brass waste with dome type grating complete including cutting and making good the wall and sealing the sleeves as required including fixing on brackets.
150
-
-
Providing, fixing & testing and commissioning of glazed vitreous china flat back urinals partition complete with fixing on wall with dash fasteners complete in all respects with cuttiing of wall and making good the same as directed.
128
-
-
Prividing and Fixing 15mm C.P. brass self closing urinal valve complete with CP brass flush pipe with CP brass elbow, CP brass spreader, CP wall flange including cutting and making good the walls wherever required.
150
-
-
Providing & fixing adjustable type wash basin for handicap toilet with, 32mm C.P. brass waste of standard pattern complete including cutting and making good the wall and sealing the sleeves as required including fixing on brackets.
6
-
-
Providing & fixing raised toilet seat for handicap toilet of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
6
-
-
Providing and fixing CP brass Health faucet with 8mm dia 1 mtr. Long PVC tube and wall hook fixed to wall with rawl plugs and CP brass screws complete.
102
-
-
Providing and fixing (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2-way Bib Cock.
102
-
-
Providing and fixing CP brass soap dish 113 mm dia and 43mm deep with fixing handles and concealed fitting arrangement fixed in position by rawl plugs and CP brass screws weighing not less than 300gms.
52
-
-
Providing & fixing CP brass liquid soap dispenser with stainles steel lid and brackets fixed to wooden cleats with C.P. brass screws.
145
-
-
Prividing and Fixing 1.5 feet long connecting hose with CP brass nuts at both ends complete.
676
-
-
Providing and fixing CP brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality. 600 mm long towel rail with total length of 620 mm, 66 mm wide and effective height of 88 mm, weighing not less than 900gms.
53
-
-
Providing and fixing CP brass towel ring half circular shape 206 mm long, 132 mm wide with minimum distances of 57 mm from wall face with concealed fittings arrangement of approved quality, weighing not less than 500 gms.
115
-
-
Supplying automatic 'NO-Touch' ABS electric hand-driers complete with all accessories & fittings.
60
-
-
Providing & Fixing 300mm long SS grab bars fixed to wall with rawl plugs and CP brass screws complete.
24
-
-
Providing and fixing Chiller cum Water Dispenser with an inbuilt RO water purifier, fan cooled condenser for fast cooling, double purification by RO + UF with TDS controller suitable to remove even dissolved impurities while retaining essential minerals. Dispenser shall be floor standing design, suitable for water from all sources such as bore-wells, tanks or tap-water. Dispenser shall have water storage capacity of 20 litres and should have corporates Filmtec RO membrane, filter change alarm, Auto-start and Auto-off, Inbuilt Auto-Flushing System, Built-in SMPS that supports wide range of input voltage (200-240V AC) also Corrosion free stainless steel body and Food grade, non-breakable, ABS plastic construction complete with following specifications.
-
-
-
Type: Water Purifier
-
-
-
Purification Capacity: 25 litres/ hour
-
-
-
Max. Duty Cycle: 150 Liters / Day
-
-
-
Input Voltage: 200-240 v AC
-
-
-
Operating Voltage: 24V DC
40
-
-
WATER SUPPLY
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
Internal work - Exposed on wall
-
-
-
15 mm nominal outer dia Pipes
1
-
-
20 mm nominal outer dia Pipes
150
-
-
25 mm nominal outer dia Pipes
105
-
-
32 mm nominal outer dia Pipes
55
-
-
40 mm nominal outer dia Pipes
30
-
-
50 mm nominal outer dia Pipes
120
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
External work
-
-
-
62.50 mm nominal inner dia Pipes
120
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
Concealed work, including cutting chases and making good the walls etc.
-
-
-
15 mm nominal outer dia Pipes
675
-
-
20 mm nominal outer dia Pipes
940
-
-
25 mm nominal outer dia Pipes
640
-
-
32 mm nominal outer dia Pipes
612
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
20 mm nominal bore
23
-
-
25 mm nominal bore
16
-
-
32 mm nominal bore
12
-
-
40 mm nominal bore
5
-
-
50 mm nominal bore
16
-
-
65 mm nominal bore
7
-
-
80 mm nominal bore
1
-
-
SOIL, WASTE, VENT & RAIN WATER PIPES
-
-
-
Providing and fixing soil, waste and vent pipes.
-
-
-
100 mm dia
-
-
-
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
6340
-
-
75 mm diameter :
-
-
-
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
583
-
-
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
100 mm dia
-
-
-
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
185
-
-
75 mm dia
-
-
-
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
1
-
-
Providing and fixing plain bend of required degree
-
-
-
100 mm dia
-
-
-
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
81
-
-
75 mm dia
-
-
-
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
1
-
-
Providing and fixing double equal plain junction of required degree.
-
-
-
100x100x100x100 mm
-
-
-
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
35
-
-
Providing and fixing single equal plain junction of required degree.
-
-
-
100x100x100 mm
-
-
-
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
853
-
-
75x75x75 mm
-
-
-
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
124
-
-
Providing and fixing single unequal plain junction of required degree :
-
-
-
100x100x75 mm
-
-
-
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
67
-
-
Providing and fixing terminal guard.
-
-
-
100 mm
-
-
-
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
231
-
-
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe
-
-
-
100mm dia
-
-
-
SS 304 grade coupling with EPDM rubber gasket
5940
-
-
75mm dia
-
-
-
SS 304 grade coupling with EPDM rubber gasket
598
-
-
Providing and fixing M.S stays and clamps for sand cast Iron / centrifugally cast (spun) iron pipes of diameter :
-
-
-
100 mm
550
-
-
75 mm
50
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
100 mm inlet and 100 mm outlet
-
-
-
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
391
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
102
-
-
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe.
-
-
-
Total bracket length 580 mm of approved shape and design(For Single 100mm dia pipe)
45
-
-
Total bracket length 810 mm of approved shape and design(For Two 100mm dia pipe)
40
-
-
Total bracket length 1040 mm of approved shape and design(For Three 100mm dia pipe)
50
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
-
-
-
Internal work - Exposed on wall
-
-
-
32 mm dia nominal bore
1030
-
-
50 mm dia nominal bore
267
-
-
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
-
-
-
32 mm diameter pipe
1030
-
-
50 mm diameter pipe
267
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
100x100 mm size P type
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
60
-
-
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
100 mm diameter
100
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
-
-
-
100 mm diameter S.W. pipe
100
-
-
Providing & fixing cast brass floor clean out plug with suitable insert keys for opening, male threaded joint with connection of soil/waste pipe with GI., sockets lubricated with grease.
158
-
-
Providing and fixing GI inlet fitting approximately 450 mm long with one or more 32/40/50mm dia.. GI Sockets welded and dipped in hot bitumen complete.
391
-
-
Providing and fixing 100mm dia. GI pipe approximately 450 mm long with one reducer elbow 100x50 mm and dipped in hot bitumen complete.
175
-
-
Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works.
-
-
-
125mm
391
-
-
100mm
175
-
-
EXTERNAL PLUMBING WORK
-
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
All Kind of Soil
-
-
-
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
2764
-
-
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre).
1052
-
-
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 3.0 m, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth upto 1.5 metre).
764
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, as directed by Engineer -in-charge.
-
-
-
All Kind of Soil
1250
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials.
-
-
-
All Kind of Soil
900
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
250
-
-
12mm cement plaster of mix :
-
-
-
1:4(1 cement: 4 coarse sand)
900
-
-
Extra for plastering on circular work not exceeding 6 m in radius :
-
-
-
In one coat
900
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round RCC pipes including bed concrete as per standard design :
-
-
-
150 mm diameter
100
-
-
200 mm diameter
1874
-
-
250 mm diameter
502
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of RCC pipes including bed concrete as per standard design
-
-
-
300 mm diameter
388
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
1584
-
-
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
-
Providing and laying non-pressure NP3 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete with bed concrete 1:4:8(1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size as per standard design.
-
-
-
150 mm diameter
100
-
-
200 mm diameter
1874
-
-
250 mm diameter
502
-
-
300 mm diameter
388
-
-
Constructing Solid blocks masonry circular type manhole 0.91 m internal dia at bottom and 0.60m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
-
-
-
0.91 m deep with FRP. cover and frame (Load bearing 20 Ton) 600 mm internal diameter conforming to EN 124 fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.
71
-
-
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m
-
-
-
Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.
14
-
-
Constructing Solid blocks masonry circular manhole 1.22 m internal dia at bottom and 0.60 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
-
-
-
1.68 m deep with FRP. cover and frame (Load bearing 20 Ton) 600 mm internal diameter conforming to EN 124 fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.
21
-
-
Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :
-
-
-
Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.
5
-
-
Constructing Solid blocks masonry circular manhole 1.52 m internal dia at bottom and 0.60 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
-
-
-
2.30 m deep with FRP. cover and frame (Load bearing 20 Ton) 600 mm internal diameter conforming to EN 124 fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.
40
-
-
Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m.
-
-
-
Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.
51
-
-
Procuring and installing LDPE septic tank with provision of sludge chamber and clear water chamber complete in all respects with following user provisions :
-
-
-
25 Users
3
-
-
Exacavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms , depth upto 1.5 m including getting out the exacavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed within a lead of 50 m :
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc, not exceeding 80 mm dia.
4001
-
-
Pipes, cables etc, exceeding 80 mm dia, but not exceeding 300 mm dia
3768
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including, trenching and refilling etc.
-
-
-
External works
-
-
-
25 mm dia nominal bore
250
-
-
32 mm dia nominal bore
50
-
-
40 mm dia nominal bore
30
-
-
50 mm dia nominal bore
20
-
-
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
25 mm diameter pipe
250
-
-
32 mm diameter pipe
50
-
-
40 mm diameter pipe
30
-
-
50 mm diameter pipe
20
-
-
Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work :
-
-
-
25 mm diameter pipe
250
-
-
32 mm diameter pipe
50
-
-
40 mm diameter pipe
30
-
-
50 mm diameter pipe
20
-
-
Providing and fixing CI sluice valve (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :
-
-
-
100 mm diameter
-
-
-
Class-II
17
-
-
150 mm diameter
-
-
-
Class-II
2
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
20 mm nominal bore
14
-
-
25 mm nominal bore
96
-
-
32 mm nominal bore
6
-
-
40 mm nominal bore
6
-
-
50 mm nominal bore
9
-
-
65 mm nominal bore
5
-
-
80 mm nominal bore
1
-
-
Constructing Solid blocks masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with FRP cover with frame 600x600mm internal dimensions (20 ton load bearing) i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
-
-
-
Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.
68
-
-
Constructing Solid blocks masonary chamber 90 cm X 90 cm X 100 cm inside with 75 class designation brick work in cement mortar 1: 4 ( 1 cement : 4 coarse sand ) for sluice valve with 600x600mm internal dimension(20 Ton load bearing) FRP cover with frame and RCC top slab 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3(1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design.
-
-
-
Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.
3
-
-
Constructing Solid blocks masonary chamber 30 cm X 30 cm X 50 cm inside with 75 class designation brick work in cement mortar 1: 4 ( 1 cement : 4 coarse sand ) for sluice valve with 300x300mm internal dimension(2.5 Ton load bearing) FRP cover with frame and RCC top slab 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3(1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design.
-
-
-
Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.
80
-
-
Providing and fixing G.I. pipes (I.S. 1239 heavy duty class) complete with all necessary G.I. Fittings including all necessary fittings like bends, elbows, tees etc., either welded or screwed or flanged joints as per requirements, including all anchor blocks, anchor fasteners, couplings in all respects including enamel painting of required shade, cutting holes and chases in RCC wall and making good complete.
-
-
-
150 mm dia
40
-
-
Providing and making connection of garden hydrant with MDPE pipe including saddle of pipe diax25mm dia and fixing on pipe complete in all respects.
80
-
-
Providing and fixing Blue Coloured MDPE pipes of PE 80 Grade stabilized including all MDPE electrofusion fittings i/c support at 1.0mm c/c & testing of joints complete as per direction of Engineer in Charge
-
-
-
PN - 16 Pipe, 20 mm OD PE80 ISO : 4427
158
-
-
PN - 12.5 Pipe, 25 mm OD PE80 ISO : 4427
1838
-
-
PN - 12.5 Pipe, 32 mm OD PE80 ISO : 4427
659
-
-
PN - 12.5 Pipe, 40 mm OD PE80 ISO : 4427
320
-
-
PN - 10 Pipe, 50 mm OD PE80 ISO : 4427
740
-
-
PN - 6 Pipe, 63 mm OD PE80 ISO : 4427
286
-
-
PN - 8 Pipe, 90 mm OD PE80 ISO : 4427
1414
-
-
PN - 8 Pipe, 110 mm OD PE80 ISO : 4427
255
-
-
PN - 8 Pipe, 160 mm OD PE80 ISO : 4427
2099
-
-
TUBE WELL
-
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.
-
-
-
All types of soil
-
-
-
300 mm dia
180
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
-
-
-
200 mm nominal size dia
120
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conformingto IS: 12818, including hire & labour charges, fittings & accessories etc.all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
200 mm nominal size dia
60
-
-
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge.
8
-
-
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mmmm x 1.6 mm complete, all as per direction of Engineer-in-charge.
2
-
-
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
120
-
-
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
-
-
-
200 mm dia
2
-
-
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
-
-
-
200 mm clamp
2
-
-
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
-
-
-
200 mm dia
2
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
80 mm nominal bore
2
-
-
Providing and fixing gun metal non- return valve of approved quality
(screwed end) :
-
-
-
80 mm nominal bore
-
-
-
Vertical
2
-
-
Supplying & installation of submersible pump set directly coupled with 7.5 HP motor nominal speed 2900 RPM suitable for operation on 3-phase, 50 cycles, 400 + 5% volts A.C. power supply to give yield of 30000/24000 LPH at a head of 50/70 mtrs.
-
-
-
Total head = 50/70 Mt
-
-
-
Flow rate = 36000/30000 LPH
-
-
-
H P = Minimum 7.5 HP
2
-
-
(Or as per site condition)
-
-
-
Supply, installation and commissioning of panel board duly wired made of 16/18 SWG sheet including fixing of the same in wall/floor on angle iron frame as per site conditions, and fitted with the following:
-
-
-
1 No. L & T make DOL starter.
2
-
-
1 No A/E make suitable range voltmeter size 96 mm.
2
-
-
1 No A/E make suitable range ammeter size 96 mm.
2
-
-
1 No. minilec make single phase preventer.
2
-
-
3 Nos MCB for lamps, ammeter and voltmeter.
2
-
-
3 Nos. indicating lamps (Essen/Rishab make).
2
-
-
1 No MCB of suitable range (MDS/Standard make).
2
-
-
Voltage selector switch- 1No.
2
-
-
Push button ON/ OFF switch L & T make - 1 No.
2
-
-
Supply & installation of 80 mm dia column pipe made out of 80 mm dia GI including the cost of fittings complete in all respect 'B' class pipe.
150
-
-
Providing & fixing heavy duty PVC sheathed copper conductor 1100 volts grade cables with clamps complete in all respect.
-
-
-
Control cable for low water level guard 2 core 2.5 Sq.mm.
60
-
-
Power cable 3 core 4 Sq.mm.
60
-
-
STORM WATER DRAINAGE SYSTEM
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, as directed by Engineer -in-charge.
-
-
-
All Kind of Soil
14141
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level.
-
-
-
1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
387
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
1742
-
-
1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
1453
-
-
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement, with 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
156
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
1096
-
-
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
All works upto plinth level
-
-
-
Steel Reinforcement for R.C.C work including straightening, cutting, bending placing in position and binding all complete upto plinth level.
-
-
-
Thermo - Mechanically treated bars of grade Fe-50 OD or more
187340
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights.
-
-
-
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. for mass concrete.
14109
-
-
Suspended floors, roofs, landings, balconies and access platform
4703
-
-
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
50
-
-
EARTHWORK FOR SHIFTING OF NALA.
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, as directed by Engineer -in-charge.
-
-
-
All Kind of Soil
59103
-
-
PUMPS & TREATEMENTS PLANTS
-
-
-
Providing, fixing and testing of skid mounted pumping system comprising of :-
-
-
-
Horizontal centrifugal pumping set with CI body and bronze impeller with stainless steel SS 304 shafts connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply.
-
-
-
GI Suction and delivery header with Ball valves Hot Pressed brass OT-58 with stainless steel ball and P.T.F.E seal and O-Ring. NRVs to be used should be with Springs and O-Ring arrangement.
-
-
-
Complete set system to be mounted on a common base frame and shall follow following duty.
-
-
-
Domestic Water Transfer Pump
-
-
-
No. of Pumps: 2 (1 Working + 1 Stand by )
-
-
-
Capacity : app.400 lpm
-
-
-
Head : 50m
1
-
-
Filter/Softener Feed Pump
-
-
-
No. of Pumps: 2 (1 Working + 1 Stand by )
-
-
-
Capacity : app.400 lpm
-
-
-
Head : 25m
1
-
-
Pressure Filter (Domestic Water)
-
-
-
Providing and fixing vertical pressure filter with dual media filter (comprising of 1050mm bed depth of graded sand gravel and 1050mm bed depth of Anthracite) fabricated from high performance M.S plate of minimum 6mm thick for shell & 8mm thick for dished ends with top and bottom flanged openings including top and bottom hub and lateral distribution and collection system complete with initial charge of filter media, face piping, valves, accessories, painting, testing and commissioning complete.(Tested to 6 Kg/m2)
-
-
-
Discharge : 24000 lph
-
-
-
Filtration Rate : 15000 lit./m2/h
-
-
-
Suggested dia app. : 1.500 m
1
-
-
Activated carbon Filter (Domestic Water)
-
-
-
Providing and fixing vertical activated carbon filter comprising of activated carbon filter media fabricated from high performance M.S plate of minimum 6mm thick for shell & 8mm thick for dished ends with top and bottom flanged openings including top and bottom hub and lateral distribution and collection system complete with initial charge of filter media, face piping, valves, accessories, painting, testing and commissioning complete.(Tested to 6 Kg/m2)
-
-
-
Discharge : 24000 lph
-
-
-
Filtration Rate : 15000 lit./m2/h
-
-
-
Suggested dia app. : 1.500 m
1
-
-
Water Softener
-
-
-
Providing and fixing ‘Cation’ ION exchange water softener fabricated from minimum 8mm thick M.S. plate on shell and 10mm thick M.S. plate on dished ends complete with initial charge of filter media and ION exchange resins, face piping accessories, piping testing and commissioning complete with resins of approved quality and make and brine tank of required capacity. (Bidder must indicate type and quantity of resin used and quantity of salt required per regeneration).
-
-
-
Minimum expected rate of flow: 24000 lph
-
-
-
Total soft water to be produced between two regeneration: app. 180 Cu.m
-
-
-
Expected raw water hardness : app. 250-300 ppm(Hardness values are assumed. Please get it tested before execution)
-
-
-
Expected treated water hardness: less than 100 ppm
-
-
-
Max. working pressure : 4 Kg/cm2
-
-
-
Total soft water to be produced between two regeneration: app. 180 Cu.m
1
-
-
Providing and fixing M.S salt saturator, internally rubber lined as per requirement and externally painted with suitable anti-corrosive paint, with all required accessories for holding and supplying salt for softener complete in all respects, with electrically operated stirrer and of capacity 500 litres.
1
-
-
Design, Fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre fabricated out of 14 gauge CRCA sheet steel. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Quoted rates shall be inclusive of cables (from this panel to panel of Domestic water transfer pump, filter feed pumps & sump pumps in accordance to specification) with earthing from panel to earthing pit.
-
-
-
Panel shall be supplied with P&I based online MIMIC display with LED's at all specific drive /operation to enable Visual Display of Complete pumps activity on Panel front.
-
-
-
For domestic water transfer pumps, filter feed pumps, auto chemical doser and sump pumps etc. in plant room.
-
-
-
One incoming main isolation 160A TPN MCCB (25ka).
-
-
-
200 A TPN Fully taped copper bus bar in a separate bus bar chamber.
-
-
-
2 Nos. 40 A TPN MCB outgoing for domestic water transfer pumps with 2 Nos. DOL starter.
-
-
-
Motor controller with float swich and controll wiring for switch on and swich off the pumps. Relay for cyclic operation of domestic water transfer pumps. Pump working sequence should change after every operation.Contractor overload relays and MCBs should confirm to IEC 898 – 1995/ specifications. Blinking indications for pumps start, trip, low level trip, health supply should be provided in the panel along with the ammeter & voltmeter also consist of Single phase preventors complete with auto manual swiches, Voltmeter/Ameter, Indication lights.
-
-
-
2 Nos. 40 A TPN MCB outgoing for filter feed pumps with 2 Nos. DOL starter.
-
-
-
Motor controller with float swich and controll wiring for switch on and swich off the pumps. Relay for cyclic operation of filter feed pumps. Pump working sequence should change after every operation. Contractor overload relays and MCBs should confirm to IEC 898 – 1995/ specifications. Blinking indications for pumps start, trip, low level trip, health supply should be provided in the panel along with the ammeter & voltmeter also consist of Single phase preventors complete with auto manual swiches, Voltmeter/Ameter, Indication lights.
-
-
-
1 Nos. 32 A TP MCB of for each sump pumps
-
-
-
Motor controller with float swich and controll wiring for switch on and swich off the pumps. Relay for cyclic operation of sump pumps. Pump working sequence should change after every operation.Contractor overload relays and MCBs should confirm to IEC 898 – 1995/ specifications. Blinking indications for pumps start, trip, low level trip, health supply should be provided in the panel along with the ammeter & voltmeter also consist of Single phase preventors complete with auto manual swiches, Voltmeter/Ameter, Indication lights.
-
-
-
Panel type voltmeter 150mm with rotary selector switch for reading voltage between phases.
-
-
-
Panel type Ammeter 150mm with rotary selector switch for reading currents between phases.
-
-
-
Neon phases indicating lights on the incoming mains.
-
-
-
All internal wiring colour coded from incoming mains to various switchgear, starter, meter, indicating lamp and bus bar. All the cable entry to the panel shall be from the top.
-
-
-
(All for above from item (a) to (l) complete set). (The shop drawing to be prepared and approved before fabrication)
1
-
-
Providing and fixing motor pump controller cum water level indicating panel in powder coated sheet metal box in 16 gauges M.S including the following:
-
-
-
Electronic water level controller working on magnetic type sensing probes with necessary length of armored cable up to control panel.
-
-
-
Electronic minimum 4-level indicator with magnetic type sensing probes and necessary length of armored cable upto control panel.
-
-
-
Arrangement of alternate switching mechanism for operational and standby pumps.
-
-
-
For Water level indicators with following details:
-
-
-
Underground water tanks
-
-
-
Minimum 4 level Multi level indicators with magnetic type sensor probes complete.
4
-
-
Centralized overhead water tank
-
-
-
Minimum 4 level Multi level indicators with magnetic type sensor probes complete.
1
-
-
For water level controllers with electronic sensing probe complete in all respect for following functions.
-
-
-
i) Tubewell Water Pumps
-
-
-
To cut off at low level in raw water U.G tanks. And cut off at high level in U.G raw water tank.
1
-
-
Providing and fixing G.I. pipes (I.S. 1239 heavy duty class) complete with all necessary G.I. Fittings including all necessary fittings like bends, elbows, tees etc., either welded or screwed or flanged joints as per requirements, including all anchor blocks, anchor fasteners, couplings in all respects including enamel painting of required shade, cutting holes and chases in RCC wall and making good complete (The cost of flanges will be paid separately).
-
-
-
65mm dia
10
-
-
80mm dia
20
-
-
100mm dia
45
-
-
Providing and fixing C.I double flanges suction strainer bucket type/ “Y” type including, nuts, bolts and 3mm thick rubber insertion complete.
-
-
-
100mm dia
2
-
-
Providing and fixing butterfly valves, wafer end type class PN 1.0 as per I.S:13095 - 1991 or BS:5155, including necessary nuts, bolts, gaskets etc. complete (without gear box)
-
-
-
100mm dia nominal bore.
4
-
-
Providing and fixing M.S. slotted cable tray supported from ceiling at intervals of 60cms on both ends including cable clips with nuts and bolts welding of support rods with ceiling inserts or through dash fasteners cutting and making good complete.
-
-
-
300mm wide
25
-
-
150mm wide
30
-
-
Providing and fixing M.S. structural work fabricated from standard section e.g. M.S rounds, angles, channels, plates including cutting to size, drilling, welding fixing and welding to insert plates in RCC structural members or through dash fasteners as per site conditions as directed by Engineer-in-charge including cutting and making good the walls, ceilings and floors (for pipe supports, clamps etc.)
100
-
-
Submersible pumps
-
-
-
Submersible single stage single entry pumps with C.I.body and C.I. two vane enclosed type impeller connected to TEFC submersible motor for 415 volts, 3 phase, 50 cycles including MCC panel with level controllers, auto control, sequential change over facility with one proper working at low level & two proper working at high level with an audible alarm including all interconnectivity cables, with both pumps connected to common outlet header including valves, non return valves, lifting chains etc. complete in all respect.
-
-
-
(one working+One Standby)
-
-
-
(Solid handiling capacity 12mm)
-
-
-
Capacity : 225 lpm (Each)
-
-
-
Head : 12 m
-
-
-
HP (Approx) - 1.0 HP
1
-
-
UV Treatment:
-
-
-
Providing and fixing automatic uV Treatment system consisting of electronic system, suitable to doze UV to a flow of water of maximum 24000 lph. against a pressure of 40-50psi complete with all standard accessories.
1
-
-
STP
-
-
-
Design, supplying, installing, testing & commissioning of MBR based Sewage Treatment Plant (excluding excavation, back filling & disposal of surplus earth MS/Civil construction work) for the following duty:
-
-
-
Nature of effluent - Domestic Sewage from toilets, canteen kitchen waste water.
-
-
-
Daily average flow - 150 KLD
-
-
-
Owners Scope- All Civil related activities, Power, Water and all plant room requirements like Treated water disposal, Drain trench, Ventilation, Lightining etc
-
-
-
The STP shall be designed based on the following parameters:
-
-
-
Flow Rate - 150 KLD
-
-
-
pH - 7-9
-
-
-
BOD - 250 - 350 mg/lt.
-
-
-
COD - 400 - 500 mg/lt.
-
-
-
SS - 250 - 350 mg/lt.
-
-
-
Oil & Grease - 50 - 100 mg/lt.
-
-
-
The treated sewage shall have following characteristics:
-
-
-
pH - 7.0 - 7.5
-
-
-
BOD - less than 10 mg/lt.
-
-
-
COD - less than 50 mg/lt.
-
-
-
SS - Less than 10 mg/lt.
-
-
-
Oil & Grease - less then 10 mg/lt.
-
-
-
Supply, installation, testing & commissioning of 2 Nos. Stainless Steel Suitable Sized Manually operated Bar Screen made of SS 304 in RCC screen channel with Belt Conveyor, Aluminium Chute, Wheel Barrow.
1
-
-
Supply, installation, testing & commissioning of Non clogging type submersible pumps capable of handling solids up to 35 mm having CI. casing impeller complete with all accessories, valves, headers etc motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically. Pumps shall have following duty:
-
-
-
Raw Sewage Transfer Pumps
-
-
-
Flow rate (each) = 7 m3/hr
-
-
-
Qty = 3 Nos (2W + 1SB)
1
-
-
Equalization Tank Transfer Pump
-
-
-
Flow rate (each) = 40 m3/hr
-
-
-
Qty = 2 Nos (1W + 1SB)
2
-
-
Supply, installation, testing & commissioning of Waste Activated Sludge Pumps -Non clogging type centrifugal pumps capable of handling solids up to 7-8 mm having C.I. casing & CI impeller complete with all accessories, motor of required capacity, Pumps shall have following duty:
-
-
-
Flow rate (each) = 16 m3/hr
-
-
-
Head = 6 mtr
-
-
-
Qty = 02 Nos (1W + 1SB)
2
-
-
Supply, Installation, Testing & Commissioning of 2 nos. Jet Aeration System consisting of a Submersible pump connected to an injector type venturi assembly for aeration in Equalization Tank. Submersible Pump shall be Single Phase 1.5 kw motor rating.
2
-
-
Supply, Installation, Testing & Commissioning of 2 nos. Self Aspirating Unidirectional Jet Aeration System consisting of a jet motive pump connected to an injector type venturi assembly for aeration in SBR Tank. Jet motive pump shall be capable of maintaing 5.0 kg/hr SOR in the tank with 3 phase 5.9 kw motor rating.
2
-
-
Supply, Installation, Testing & Commissioning of Centrifugal pumps having C.I. casing & CI impeller complete with all accessories, valves, headers motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) Pumps shall have following duty:
-
-
-
Irrigation Pumps
-
-
-
Flow rate (each) = 6 m3/hr
-
-
-
Head = 30-35 Mtr
-
-
-
Quantity = 02 Nos (1W + 1S)
1
-
-
Supply, installation, testing & commissioning of MBR Package, Automated system which shall include MS Tank size of diameter 3.657 meter, 20.50 meter length, 6 mm thick. This tank will have three partitions. Each partition will represent one treatment unit namely – primary settler, equalization tank, and MBR, Surface Floating type Decanter with solid exclusive and all time scum free features to efficiently and uniformly withdraw clear supertant, consisting of Submersible Pump mounted to a float system. The decanter shall be free to move vertically while being guided horizontally through its hinged connection to allow free vertical displacement during the operation. Inlet of sewage water decantation and aeration shall be automatic and PLC controlled with the help of suitable equipment arrangement. MBR cycle shall be auto controlled with feedback of various equipments. Human Machine Interface shall be provided with PLC to make the system complete. 3 nos. Float Switches are provided in Equalization Tank & 4 nos. Float Switches are provided in MBR Tank for measuring level.
2
-
-
Electrical wiring for electrical connection of equipments.with cable tras ets.complete.
1
-
-
Supply, Installation, Testing & Commissioning of UV Disnfection System with required accessories.
2
-
-
EXTERNAL & INTERNAL FIRE FIGHTING WORKS
-
-
-
PIPING & VALVES
-
-
-
Providing and fixing M.S. pipe to I.S. 1239 (Heavy class) complete with all supports & fittings like, unions, couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. to complete the work as per the requirement at site including painting with one coat of primer after surface preparartion and two coats of synthetic enamel paint, cutting and making good the walls good complete. Pipe upto 40 mm dia threaded joints using Cast Steel fittings with holdtite, 50 mm dia and above should be welded joint ( all type ) ( internal works/External Works)
-
-
-
25 mm dia.
670
-
-
32 mm dia.
140
-
-
40 mm dia.
45
-
-
50 mm dia.
245
-
-
65 mm dia.
160
-
-
80 mm dia.
615
-
-
100mm dia
400
-
-
150mm dia
3125
-
-
200 mm dia (7.35mm thick) IS:3589
30
-
-
250 mm dia (7.35mm thick) IS:3589
30
-
-
Providing and fixing one coat of 4 mm thick PYPKOTE/ COATAK anti-rust pipe protection including primer and lap of 25mm on external buried pipe including surface preparation, complete in all respects.
-
-
-
80mm dia
350
-
-
100mm dia
210
-
-
150mm dia
3000
-
-
Excavating trenches of required width for pipes cables etc. in any type of soil including excavation for sockets and dressing of sides ramming of bottom, depth upto 1.5 M including getting out the excavated soil, and then returning the soil as required in layers not exceeding 20cms in depth including consolidating Sets deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m.
-
-
-
80 mm dia. but not exceeding 300 mm dia
3560
-
-
Providing and fixing cast iron dual plate wafer type non return valves of PN1.6 including nuts, bolts,1.5mm thick compressed asbestos gasket including matching flanges as per table "E" complete
-
-
-
65 mm dia
1
-
-
80 mm dia
1
-
-
100 mm dia
1
-
-
150 mm dia
4
-
-
Providing and fixing cast iron double flanged horizontal/vertical non return valves of PN1.6 including nuts, bolts, 3mm thick compressed asbestos gasket including matching flanges as per table "E" complete as per IS:5312 swing type.(For Pumps Only)
-
-
-
80 mm dia.
1
-
-
100 mm dia.
1
-
-
150 mm dia.
2
-
-
Providing and fixing C.I. butterfly valves PN 1.6 complete with bolts, nuts 1.5mm thick compressed asbestos gasket companion flanges as per table "E" complete.
-
-
-
150 mm dia with lever
24
-
-
100 mm dia with lever
10
-
-
80 mm dia with lever
8
-
-
65 mm dia with lever
3
-
-
Providing and fixing C.I. foot valves including nuts, bolts,1.5mm thick compressed asbestos gasket complete and companion flange as per table " E "in all respects
2
-
-
150 mm dia.
2
-
-
Providing and fixing brass ball valve (full bore type) with plastic coated lever and screwed female ends tested to 20 Kg/ cm2 of approved quality as specified.
-
-
-
25 mm dia.
81
-
-
50 mm dia.
10
-
-
Providing and fixing dial type pressure gauge with isolation cock and copper pipe at hydrant station.
-
-
-
Dial diameter 100 mm calibration 0-15 kg/ sq.cm.
25
-
-
Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia..
17
-
-
Providing and fixing blank flanges as per table 'E' with asbestos gasket, nut, bolts, washers complete
-
-
-
150 mm dia.
10
-
-
FIRE HYDRANT ACCESSORIES
-
-
-
Providing and fixing SS304 Single headed landing valve conforming to IS -5290 (Type-A) with 63 mm dia. single instantaneous female coupling on the outlet SS304 metal blank cap and chain, necessary companion flanges, nuts, bolts, washer and gasket complete as per specification. (ISI marked). All parts and body shall be of SS304 as per IS:5290.
-
-
-
Single outlet
46
-
-
Providing and fixing first aid fire hose reel drum wall mounting, swinging type(Powder coated finish in fire red) fitted with 20 mm dia. 30 m long high pressure hose(IS:12585, Type-2) with 5 mm outlet SS nozzle with shut off valve (IS:8090). Name of Manufacturer should be embossed on the drum and complete hose reel drum shall be conforming to IS:884)
30
-
-
Providing and fixing 63 mm dia. 15m long rubberized lined hose including SS304 male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects. Hose shall conform to IS 636 Type-A and coupling to IS 903 -1975 ( ISI marked)
92
-
-
Providing and fixing standard short size SS304 branch pipe with gunmetal nozzle 16 mm dia. outlet with standard instantaneous type 63 mm dia. coupling. (ISI marked, IS:903)
46
-
-
Providing and fixing door with frame for all internal fire hydrants fabricated from 20x20x3 mm and 40x20x3 mm aluminium hollow box sections mounted with 3 no. of 100 mm Aluminium butt hinge on Aluminium angle frame of 45x45x5 mm size with hold fasts fixed to wall with P.C.C. (1:2:4) blocks 100x100x100 mm including 2 nos allen key lock for locking along with padlock arrangement & fully glazed with 4 mm thick float glass approved by local Fire Authority, powder coated fire red finish with " fire hose' written on front suitable to house 15 mm long two length of canvas hose with couplings, one no of branch pipe, one fire mans axe and two numbers of portable extinguishers, first aid fire hose and supports for hoses, branch pipes, Axe and hose reel. Size 2100x 900 mm complete as per approved design including necessary fixing arrangement for hoses & axe and branch pipe.)
14
-
-
Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. Sheet with single or double glazed front door and locking arrangement, painted "Fire Red" with powder coated paint "Fire Hose" written on front including suitable supports to place 900 mm above ground level, approximately size 750x600x250 mm deep (to house two lengths of canvas hose with couplings, branch pipe and nozzle for external hydrants)
32
-
-
Providing and fixing gunmetal fire brigade inlet head as per IS:904 Specification tested for 20 Kg/cm2 with 63 mm dia. instantaneous type inlet and 100/150mm dia.. flanged outlet with built-in check valve for fire brigade connection to under ground tanks and fire risers including companion flanges as portable " E" including nuts, bolts & washers etc.
-
-
-
Four way
2
-
-
Two way
1
-
-
Providing and fixing gunmetal fire brigade suction 150 mm dia. for fire tank complete with PVC Cap companion flange as per table "E" nuts, bolts, gasket etc
-
-
-
150 mm
1
-
-
Supplying and fixing of Fire Man's Axe with heavy insulated rubber tested upto 20 KV and confirming to IS :926.
14
-
-
Air Cushion Tank for Risers
-
-
-
Providing and fixing of air vessel of the following specifications fabricated with MS Pipe of thickness specified specifications.
-
-
-
a. Diameter : 200 mm
-
-
-
b. Shell Thickness: 6.35 mm
-
-
-
c. Dish Ends : 10 mm
-
-
-
d. Height : 1000 mm
-
-
-
e. Finishing: Two coats of red enamal
-
-
-
paint over primer out side and two
-
-
-
coats of epoxy coating inside.
-
-
-
f. Material of construction: M.S
-
-
-
g. Test Pressure: 20 Kg/Sq.Cm.
-
-
-
h. Height of supporting legs: 400 mm
-
-
-
i. Quantity
17
-
-
Note: Contractor should submit general arrangement drawings before fabrication of vessel and ultrosonic test report to be submitted on supply of vessel and test to be conducted at the presence of Plumbing-In-Charge. Also cost shall include two nos. Gunmetal NRV(ISI Marked)
-
-
-
Providing and fixing "Y" suction strainer with flanged connection 150 mm dia. suitable for 2280 lpm discharge with stainless steel 20 mesh complete including companion flanges etc. suitable for 150 dia. inlet and 150 dia. outlet including inside with rubberized paint and outside with two coats of enamel paint of approved shade after surface preparation necessary stainless steel nuts, bolts, washers etc.
2
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
30
-
-
Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set to operate at specified temperature pendent/ upright/ side wall /quick response as per instruction fixed with loctite. Temperature of operation 68 deg.C K-80
-
-
-
Normal response Pendent type/ upright type
245
-
-
Normal response Side wall type
5
-
-
Extended throw normal response Up right type
5
-
-
Providing & fixing 25mm dia. UL listed gunmetal inspector test and drain valve with integral sight glass connected to drain line complete in all respects.
6
-
-
Providing and fixing electrically operated flow indicating switches model System Sensor in sprinkler branch line on each floor with necessary junction box installed in accessible place (Wiring from switches to panel and stair case pressurization not included)
-
-
-
100/65/80/50 mm dia.
6
-
-
Providing and fixing gunmetal installation valve with turbine type automatic alarm to be connected with control valve , drain valve, test valve and piping as per manufacturer's specifications complete in all respects.
-
-
-
150 mm dia.
1
-
-
Providing and fixing UL/Fm listed powder coated finish Escutcheon plate complete including fixing in position on pipe and ceiling complete in all respects. (Size=15NB)
245
-
-
Providing and fixing UL/Fm listed SS braided flexible pipe with accessories complete with all accessories specified in technical specifications(Size=15B)
-
-
-
780mm long
50
-
-
1000mm long
50
-
-
FIRE PUMPS & ACCESSORIES
-
-
-
( All pumps will be supplied with wearing ring ,mechanical seal and coupling guard and Base Frame. Rates Quoted for pumps shall include making of foundation, supply and fixing of base frame, foot valve on suction side, butterfly valve and NRV on delivery side complete in all respects)
-
-
-
Wet Riser Pump and Sprinkler Pump(Single stage) Providing and fixing Factory fitted horizontal split casing pumping set with volute bronze impeller connected to a TEFC induction motor suitable for 410/440 volts, 3 phase , 50 cycles AC supply as per the details given below:
-
-
-
a. Capacity : 2280 lpm
-
-
-
b. Head : 70 meter
-
-
-
c. HP : As per Approved performance curve
-
-
-
d. No of stages : single
-
-
-
e. RPM : 1450
-
-
-
f. Mover : Electric Motor driven.
-
-
-
g. Material of Construction/Specification
-
-
-
h. Shaft & Sleeve: S.S. 410
-
-
-
i. Impeller : Bronze
-
-
-
j. Casing : CI
-
-
-
k. Bearing : Grease lubricated
-
-
-
l. Seal : Mechanical Seal
-
-
-
Quantity :
1
-
-
Note: Pump and Motor should meet the additional requirements as specified in the Specifications
-
-
-
Jockey Pump:(Multi stage)Providing and fixing factory fitted multi stage horizontal centrifugal pump with volute brozne impeller conntected to TEFC induction motor suitable for 400/410 Volts, 3 Phase, 50 Cycles , AC supply with the following specifications:
-
-
-
a. Capacity : 180 lpm
-
-
-
b. Head : 70 m.
-
-
-
c. HP : As per Approved performance curve
-
-
-
d. RPM : 2900
-
-
-
e. Mover : Electric Motor driven
-
-
-
f. Material of Construction:
-
-
-
g.Shaft & Sleeve : S.S. 410
-
-
-
h.Impeller : Bronze
-
-
-
i. Bearing : Grease lubricated
-
-
-
j. Seal : Mechanical Seal
-
-
-
Quantity :
1
-
-
Diesel Engine Driven Fire Pump
-
-
-
Supplying and fixing factory fitted single stage horizontal split casing pumping set of the following specifications including vibration elimination pads.
-
-
-
Capacity : 2280 LPM
-
-
-
Head : 70m
-
-
-
HP : As per approved performance curve
-
-
-
RPM : 1500 (pump and engine)
-
-
-
Material of Construction:
-
-
-
Shaft & Sleeve : S.S. 410
-
-
-
Impeller : Bronze
-
-
-
Bearing : Grease, lubricated
-
-
-
Seal - Mechanical seal.
-
-
-
Pump foundation as per manufacturer.
-
-
-
Quantity :
1
-
-
Note: Pump and motor should meet the additional requirement as specified on the specifications and rates will be inclusive of everything as mentioned in the specifications.
-
-
-
Supplying, installing, testing & commissioning of electric driven automatic pressurisation pump set with motor control panel with DOL starter, MCB, cabling etc. consisting of the following :
-
-
-
Horizontally mounted centrifugal split casing type Terrace pump complete for delivery of 900 ltrs/minute against a total head of 20 metres approx complete with arrangement for testing of the working of the pumping set as required. Rate shall also include Mechanical Seal.
-
-
-
Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable 10 HP rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type such as confirming to IPL55 and flexible coupling and coupling guard with the pump.
-
-
-
Common bed plate of fabricated mild steel channel or cast iron type.
-
-
-
Suitable cement concrete pump foundation with cushy foot, MS bolts, washers as requiried.
1
-
-
Air Vessel for Fire Pump:
-
-
-
Providing and fixing of air vessel of the following specifications fabricated with MS sheets.
-
-
-
a. Diameter : 400 mm
-
-
-
b. Shell Thickness: 8 mm
-
-
-
c. Dish Ends : 10 mm
-
-
-
d. Height : 1500 mm
-
-
-
e. Finishing: Two coats of red enamal
-
-
-
paint over primer out side and two
-
-
-
coats of epoxy coating inside.
-
-
-
f. Material of construction: M.S
-
-
-
g. Test Pressure: 22 Kg/Sq.Cm.
-
-
-
h. Height of supporting legs: 400 mm
-
-
-
i. Quantity
1
-
-
Note: Contractor should submit general arrangement drawings before fabrication of vessel and ultrosonic test report to be submitted on supply of vessel and test to be conducted at the presence of Plumbing-In-Charge.
-
-
-
Providing and fixing liquid level controller for fire pump to stop fire pump in case of low level of water in tank , cost of conduit, cable and panel including making connection to pump panel and commissioning complete.
-
-
-
Float type Sensor with panel
3
-
-
Installation
3
-
-
Providing and fixing dual type pressure switch suitable for 1-20 Kg/cm2 including electrical connections setting of Cut-In and cut-Off pressure complete in all respects.
3
-
-
Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and /or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved postal red color shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Cadmium Plated hardware shall be used in fabrication of panels.
-
-
-
Incomer:
-
-
-
One incoming main isolation TPN MCCB of 250A rating
-
-
-
One fully taped copper bus bar of 300A capacity in separate bus bar chamber.
-
-
-
One square panel type Voltmeter reading 0-500 V with rotary selector switch for reading voltage between phases.
-
-
-
One panel type Amperemeter (0-630A) with selector switch and CT
-
-
-
3 phase indication lights
-
-
-
Outgoing
-
-
-
1 no. 200A TPN MCCB for main pump/Sprinkler Pumps
-
-
-
1 no. 20A TPN MCB one for jockey pump
-
-
-
1 no. Star-Delta starter, one no. DOL Starter of suitable capacity.
-
-
-
2 nos. single phase preventors of suitable rating one for each motor
-
-
-
2 nos. rotary types auto/manual off selector switch.
-
-
-
Space for 3 Nos. liquid level controller
-
-
-
Providing and fixing 1 No. auto start panel activated with pressure switchfor diesel engine complete with all accessories, batteries, battery charger of suitable rating, MCB timers, push buttons, microprocessor based alarm annunciator, wiring and cabling including connection to diesel engine complete as required ready for working
-
-
-
Appropriate etched aluminium identification plate for each starter/switch.
-
-
-
Colour coded internal wiring from main to bus bar, switchgear, starters, indicating lamps complete in all respects.
1
-
-
Supplying & laying of following 1100 volt grade PVC insulated sheathed copper conductor armoured cable as per specification in cable trays, clamped includes anchor fastners to wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning. (For Jockey Pump 2 Runs)
-
-
-
3 core 4 sqmm
40
-
-
Supplying & laying of following 1100 volt grade PVC insulated sheathed XLPE aluminium conductor armoured cables as per specification in cable trays, ducts, clamped includes anchor fastners to wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning.(For Main Hydrant/Sprinkler Pumps 2 Runs)
-
-
-
3 core 35 sqmm
40
-
-
Cable end termination of the following PVC insulated sheathed PVC/XLPE aluminium conductor armoured cables of 1100 volt grade including supplying and fixing of crimping aluminium lugs, double compression glands with earthing facility at both ends of cables etc. complete as required
-
-
-
3 core 35 sqmm Alumnium conductor cable
4
-
-
3 core 4 sqmm Copper conductor cable
4
-
-
Supply and fixing of perforated type GI cable trays of the following sizes as per specifications
-
-
-
150 mm x 40 x 40 x 2 mm thick
35
-
-
300 mm x 40 x 40 x 2 mm thick
25
-
-
Supply, Testing & Commissioning, fixing of following bare GI/Copper tapes / wires including all necessary fixing accessories and effecting connections as per specifications.
-
-
-
4mm dia Copper wire
20
-
-
25 x 3 mm thick Copper tape
45
-
-
Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels ,slotted angle, etc.) including cutting to size, drilling ,welding or insert plates including cost of (Hilti) fasteners, clamp in RCC structural members as directed, including two or more coats of synthetic enamel paint over one coat of primer after surface preparation including cutting and making good walls.
200
-
-
Providing and fixing diesel engine exhaust pipe with M.S. pipe to I.S. 1239 (Heavy Class) complete with all supports & fittings like, unions, couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. to complete the work as per the requirement at site including insulating the pipe with 12 mm thick supercera ceramic fibre rope over two coats of primer after surface preparartion and two coats of bitumastic paint, cutting and making good the walls good complete)
20
-
-
Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 4.5 kg. ISI Marked.( Contractor should submit test certificate form manufacturer along with serial number of every extinguishers supplied.)
50
-
-
Providing and fixing mechanical foam type (ISI marked) fire extinguishers consisting of welded M.S. cylindrical body squeeze lever discharge valve 30 cm long high pressure discharge hose, discharge nozzle suspension bracket ISI marked finished externally with red enamel paint and fixed to wall with brackets complete with internal charger.
-
-
-
9 liters capacity. (IS. 15683)
20
-
-
Providing and fixing water Co2(ISI marked) extinguishers including all accessories as per IS specification with wall bracket with rawl plug
-
-
-
Capacity 9 liters.(IS:15683)
40
-
-
Providing and fixing ABC powder type fire extinguishers consisting of welded M.S. cylindrical body automatic modular ABC powder type extinguisher actuated through a sprinkler head mounted on The extinguisher body finished externally with red enamel paint and fixed to ceiling with brackets complete with internal charge. [For Transformer/DG/LT panel room]
-
-
-
Capacity 5 Kg.(IS:15683)
20
-
-
Providing and fixing of self illuminated / auto glow "EXIT" signs printed on photoluminescent sheet containing self illuminated base chemical, of appropriate size not less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories as required and as directed at site.
15
-
-
Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, trolly mounted, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 22.5 kg. ISI Marked.( Contractor should submit test certificate form manufacturer along with serial number of every extinguishers supplied.)
3
-
-
Providing and fixing mechanical foam type (ISI marked) fire extinguishers consisting of welded M.S. cylindrical body squeeze lever discharge valve 30 cm long high pressure discharge hose, discharge nozzle, trolly mounted ISI marked finished externally with red enamel paint and fixed to wall with brackets complete with internal charger.
-
-
-
50 liters capacity. (IS. 15683)
3
-
-
PAVEMENT WORK
-
-
-
Clearing and grubbing road land including uprooting rank vegetation, grass, brushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of treees cut earlier and disposal of unserviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness.
26.27
-
-
Construction of sub-grade with approved material (non plastic soil with CBR 6) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required to slope and compacting to meet requirement of Table 300- 2 and clause No. 305 of MoRTH specifications.
68723
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 of MoRTH specifications (Table:- 400-1 : For Grading-V Material).
22172
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 of MoRTH specifications (Table:- 400-1 : For Grading-II Material).
17964
-
-
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406 of MoRTH specifications.
38926
-
-
Providing and laying 100mm thick factory made cement concrete interlocking paver block of M-45 grade by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer - in - charge.
119754
-
-
Earth work in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m, as directed by Engineer-in-charge in all kinds of soil
5000
-
-
Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, with sprinkler and maintenance for 30 days or more till the grass established properly as per direction of officer in charge.
68800
-
-
Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade / colour using hot thermoplastic material by fully/ semi automatic shade / colour using hot thermoplastic material by fully / semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road/paved surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer -in-charge and accordance with applicable specifications.
11976
-
-
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
403
-
-
Painting of Kerb stone / road surface marking with adequate no. of coats to give uniform finish with ready mixed road marking paint conforming to IS: 164, on bituminous / kerb stone surface in white / yellow / black shade including clearing the surface of all dirt, scales, oil, grease and foreign material etc. complete New Work (Two or more coats)
3334
-
-
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete
7326
-
-
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of course sand, filling the joints with line sand etc. all complete as per the direction of Engineer - in - charge.
13576
-
-
Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 120 cm girth upto and including 240 cm girth each
10
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km, also including ramming and watering of the earth in layers not exceding 20 cm in trenches, plimnth, sides of foundation, embankment, etc. complete
204561
-
-
ELECTRICAL WORK
-
-
-
WIRING
-
-
-
Wiring for light point/fan point / exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable G.I. box and earthing the point with 1.5 sq.mm FRLS PVC insulated single core cable as required.
-
-
-
Group C
5583
-
-
Wiring for light/power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
11103
-
-
Wiring for light/power plug with 4 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit alongwith 2 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
7486
-
-
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. earth wire
4046
-
-
2 x 4 sq. mm +1 x 4 sq. mm earth wire
40
-
-
2 x 6 sq. mm +1 x 6 sq. mm earth wire
2157
-
-
2 x 10 sq.mm. + 1 x 10 sq.mm. earth wire
100
-
-
4 x 4 sq.mm. + 2 x 4 sq.mm. earth wire
200
-
-
4 x 6 sq.mm. + 2 x 6 sq.mm. earth wire
2478
-
-
4 x 10 sq.mm. + 2 x 6 sq.mm. earth wire
1120
-
-
4 x 16 sq.mm. + 2 x 6 sq.mm. earth wire
300
-
-
Supplying and drawing following sizes of FRLS PVC Insulated copper conductor , single core cable in the existing surface/ recessed steel / PVC conduit as required.
-
-
-
3 X 1.5 sq.mm
1400
-
-
6 X1.5 sq.mm
1812
-
-
9 X1.5 sq.mm
1073
-
-
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required.
1635
-
-
Supplying and fixing of following sizes of Steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. (for TV & Computer Point)
-
-
-
20 mm
4380
-
-
25 mm.
4200
-
-
Supplying and fixing metal box of the following sizes (nominal size) on surface or in reccess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
-
-
-
180 mm X 100 mm X 60 mm deep
36
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
TV antenna socket outlet
81
-
-
Bell Push
4
-
-
Suplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
953
-
-
Supplying and fixing followling size/ modules, G.I. Box alongwith modular base & cover plate for modular switches in recess etc as required :
-
-
-
1 or 2 module (75 x 75 mm)
85
-
-
Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
948
-
-
Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps. modular socket outlet and 15/16 amps. modular switch, connections etc. as required.
708
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel / PVC conduit as required.
-
-
-
1 run of cable
2279
-
-
2 run of cable
1497
-
-
3 run of cable
791
-
-
Wiring for group controlled (looped) light point/fan point/exhaust fan point / call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit, and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
1405
-
-
Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
30
-
-
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 amps 240 volts ''C'' curve DP MCB complete with connections, testing and commissioning etc. as required.
111
-
-
Supplying and fixing 20A, 240 V, SPN industrial type socket outlet with 2 pole and earth, metal enclosed plug top alongwith 20A, ''C'' curve, SP,MCB, in sheet steel enclosure , on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as requred.
44
-
-
Supply of 30A, TPN industrial scoket type outlet, with plug top and metal chained cover in sheet steel enclosure.
4
-
-
Installation, testing and commissioning of ceiling fan , including wiring the down rods of standard length (upto 30cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable,including providing & fixing phenolic laminated sheet cover on the fan box etc. as required.
1067
-
-
Supplying and fixing extra down rod of 10 cm length G.I pipe, 15 mm dia, heavy guage including painting etc. as required. (Not: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored).
782
-
-
Supplying and fixing extra down rod of 20 cm length G.I pipe, 15 mm dia, heavy guage including painting etc. as required. (Not: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
862
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
Upto 450 mm sweep
269
-
-
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
269
-
-
(Distribution Board & MCB)
-
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copperbusbar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator)
-
-
-
4 way (4+12), Double door
52
-
-
6 way (4+18), Double door
34
-
-
8 way (4+24), Double door
44
-
-
Supplying and fixing 5 amps to 32 Amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single Pole
1797
-
-
Triple pole and Neutral
130
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
616
-
-
Sub Head - 04 (Earthing)
-
-
-
Earthing with G.I earth pipe 4.5 meter long, 40mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.
47
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
32
-
-
Earthing with copper earth plate 600mm x 600mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
6
-
-
Supplying and laying 6 SWG G.I wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with G.I thimble etc. as required
137
-
-
Supplying and laying 25mm x 5mm Copper strip at 0.50 meter below ground as strip earth electrode, including connection / terminationg with G.I nut , bolt , spring , washer etc. as required . (Jointing shall be done by overlapping and with 2 sets of G.I nut bolt & spring washer spaced at 50 mm)
30
-
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
458
-
-
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
30
-
-
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with GI nut, bolt, spring, washer excavation and re-filling etc. as required.
354
-
-
Providing and laying earth connection from earth electrode with 6 SWG dia G.I wire in 15 mm dia G.I pipe FRLS on earth electrode including connection with G.I thimble excavation and re-felling as required.
131
-
-
Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required.
60
-
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
877
-
-
Providing and fixing 6 SWG dai G.I wire on surface or in recess for loop earthing as required.
13018
-
-
(Cable laying and Cable Trays)
-
-
-
Supplying and installing following size of preforated painted with powder coating M.S cable trays with perforation not more than 17.5%, in convenient section, joined with connectors, suspended fron ceiling with M.S suspenders including bolts & nuts, painting suspenders etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
370
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
120
-
-
300 mm width X 62.5 mm depth X 2.0 mm thickness
80
-
-
375 mm width X 62.5 mm depth X 2.0 mm thickness
10
-
-
Supplying and installing following size of perforated painted with powder coating M.S cable tray bends with perforation not more than 17.5%, joined with connectors, suspended fron ceiling with M.S suspenders including bolts & nuts, painting suspenders etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
349
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
112
-
-
300 mm width X 62.5 mm depth X 2.0 mm thickness
60
-
-
375 mm width X 62.5 mm depth X 2.0 mm thickness
10
-
-
Supplying and installing following size of perforated painted with powder coating M.S cable tray Tee with perforation not more than 17.5%, joined with connectors, suspended from ceiling with M.S suspenders including bolts & nuts, painting suspenders etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
91
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
32
-
-
300 mm width X 62.5 mm depth X 2.0 mm thickness
20
-
-
375 mm width X 62.5 mm depth X 2.0 mm thickness
2
-
-
Supplying and installing following size of perforated painted with powder coating M.S cable trays Cross Member with perforation not more than 17.5%, joined with connectors, suspended from ceiling with M.S suspenders including bolts & nuts, painting suspenders etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
10
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
4
-
-
Supplying and installing following size of perforated painted with powder coating M.S cable trays Reducers with perforation not more than 17.5%, joined with connectors, suspended from ceiling with M.S suspenders including bolts & nuts, painting suspenders etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
5
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
4
-
-
300 mm width X 62.5 mm depth X 2.0 mm thickness
3
-
-
375 mm width X 62.5 mm depth X 2.0 mm thickness
1
-
-
Laying of one number PVC insulated & PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation, sand cushioning, protective covering & refilling the trench etc. as required.
-
-
-
Upto 35 sqmm
9900
-
-
Above 35 sqmm and upto 95 sqmm
1100
-
-
Above 95 sqmm and upto 185 sqmm
314
-
-
Above 185 sqmm and upto 400 sqmm
6473
-
-
Laying of one number additional PVC insulated & PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering & refilling the trench etc. as required.
-
-
-
Upto 35 sqmm
5275
-
-
Above 35 sqmm and upto 95 sqmm
836
-
-
Laying of one number additional PVC insulated & PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering & refilling the trench etc. as required.
-
-
-
Above 185 sqmm and upto 400 sqmm
3550
-
-
Laying of one number PVC insulated & PVC sheathed /XLPE power cable of 1.1 KV grade of following size in the existing RCC Hume / Stoneware / Metal pipe as required.
-
-
-
Upto 35 sqmm
1500
-
-
Above 35 sqmm and upto 95 sqmm
530
-
-
Above 95 sqmm and upto 185 sqmm
380
-
-
Above 185 sqmm and upto 400 sqmm
1020
-
-
Laying of one number PVC insulated & PVC sheathed /XLPE power cable of 1.1 KV grade of following the existing masonary open duct as required.
-
-
-
Upto 35 sqmm
500
-
-
Above 35 sqmm and upto 95 sqmm
300
-
-
Above 95 sqmm and upto 185 sqmm
530
-
-
Above 185 sqmm and upto 400 sqmm
460
-
-
Laying of one number PVC insulated & PVC sheathed / XLPE power cable of 1.1 KV grade of following sizes on cable tray as required.
-
-
-
Upto 35 sqmm
404
-
-
Above 35 sqmm and upto 95 sqmm
220
-
-
Above 95 sqmm and upto 185 sqmm
130
-
-
Above 185 sqmm and upto 400 sqmm
70
-
-
Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 11 KV grade of following size direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc as required
-
-
-
Above 120 sq.mm and upto 400sq.mm
400
-
-
Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 11KV grade of following size in the existing RCC / HUME / METAL pipe as required.
-
-
-
Above 120 sq.mm and upto 400 sq.mm
50
-
-
Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 11KV grade of following size in the existing masonry open duct as required.
-
-
-
Above 120 sq.mm and upto 400 sq.mm
50
-
-
Supply and making end termination with brass compression gland and aluminium lugs forfollowing size PVC insulated & PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as requred.
-
-
-
4 X 10 Sqmm (25 mm)
16
-
-
4 X 16 Sqmm (28 mm)
62
-
-
4 X 35 Sqmm (32 mm)
6
-
-
3.5 X 25 sq mm (28 mm)
10
-
-
3.5 X 35 sq mm (32 mm)
4
-
-
3.5 X 70 sq mm (38 mm)
2
-
-
3.5 X 95 sq mm (45 mm)
26
-
-
3.5 X 150 sq. mm (50 mm)
4
-
-
3.5 X 185 sq mm (57 mm)
12
-
-
3.5 X 240 sq mm (62 mm)
24
-
-
3.5 x 400 sq.mm (82 mm)
24
-
-
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core , XLPE aluminium conductor cable of 11 KV grade as requred.
-
-
-
240 sq. mm
2
-
-
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) inclding trenching (75 cm deep) and refilling etc. as required.
-
-
-
100 mm dia
1110
-
-
150 mm dia
660
-
-
250 mm dia
270
-
-
300 mm dia
830
-
-
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : coarse sand :4 graaded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per stnadard design:
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions , total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)
-
-
-
With common burnt clay F.P.S ( non modular) bricks of class designation 7.5
26
-
-
Suppling, Installing by suspension on ceiling / along the wall, testing and commissioning of 4000 A, Isc=50kA for 1 second sandwich type Rising Mains for use on 3 phase 4 wire , 415 volt , 50 hz AC supply with metal clad enclouser having IP-54 rating with all accessiories made of 1.6 mm thick steel sheet duly powder coated in convient sections complete with four no aluminium bus bar having current density of 130A/ sq.cm at nomainal current rating , neccessary joints , elbow joints & expension joints and bends , fire barrierat , adopter box and copper flexible for joints, continuous earthing with 2 Nos. aluminium strip of suitable size ( one on each side ) including , G.I clamping brackets , suspenders , angle iron bracket, steel fastners , connecting to earthing system etc as required.
20
-
-
Providing and fixing M.V. danger notice plate of 200mmx150mm made of mild steel, atleast 2mm thick and vitreous enamelled white on both sides and with inscription single red colour on front side as required.
4
-
-
Providing and fixing H.T. danger notice plate of 250mm x 200mm made of mild steel, atleast 2mm thick and vitreous enamelled white on both sides and with inscription single red colour on front side as required.
4
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A 6 pin modular socket outlet including connections, painting etc. as required.( for AC )
127
-
-
Supplying and fixing of 25 A , 3 Pin Power Plug Including Connections as required etc.
127
-
-
Supply and fixing RJ-45 modular type computer socket outlet Cat-6-I module alongwith modular plate & modular hot dip G.I. Box in recess/surface etc., as required.
197
-
-
Supplying and fixing suitable size G.I Box with Modular plate and cover in front on surface or in recess including providing and fixing 2 Nos. 6A 5 Pin modular socket outlet with 1 Nos. 5A Switch & 1 No.blanking plate including connections, painting etc. as required.
236
-
-
Installation , testing and commissioning of 30A, TPN industrial scoket type outlet, with plug top and metal chained cover in sheet steel enclosure on surface or in recess as required in all respect (Tapping point for refrigerator of Warehouse Import.)
4
-
-
Supplying and fixing 63 amps rating, 240 / 415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
(a) Triple pole and Neutral
50
-
-
Supply, Installation, testing and commissioning of Surface mounted LED fixture in 2' x 2' luminaire to give 3500 lumens or more made out of CRCA sheet steel housing comprising of LED`s with acrylic diffuser, minimum correleated colour temperature is 5700K, CRI 80, Ingrees protection-IP 20, minimum internal surge protection /= 2.5 KV, constant current output driver, LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory with all accesories including connection etc. complete in all respect.
351
-
-
Supply, Installation, testing and commissioning of Recessed mounted LED fixture in 2' x 2' luminaire to give 3500 lumens or more made out of CRCA sheet steel housing comprising of LED`s with acrylic diffuser, minimum correleated colour temperature is 5700K, CRI 80, Ingrees protection-IP 20, minimum internal surge protection /= 2.5 KV, constant current output driver, LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory with all accesories including connection etc. complete in all respect.
1072
-
-
Supply , Installation , testing and commissioning of Recessed Mounted LED Downlighter to give 1000 lumens or more made out of pressure die cast aluminium with a high efficiency diffuser, minimum correleated colour temperature is 5700K, CRI 80, Ingrees protection-IP 20,constant current output driver, LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory with all accesories including connection etc. complete in all respect.
303
-
-
Supply , Installation , testing and commissioning of Surface Mounted LED Downlighter to give 1000 lumens or more made out of pressure die cast aluminium with a high efficiency diffuser, minimum correleated colour temperature is 5700K, CRI 80, Ingrees protection-IP 20,constant current output driver, LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory with all accesories including connection etc. complete in all respect.
848
-
-
Supply, Installation, testing and commissioning of Surface Mounted LED Downlighter to give 600 lumens or more made out of pressure die cast aluminium with a high efficiency diffuser, minimum correleated colour temperature is 5700K, CRI 80, Ingrees protection-IP 20,constant current output driver, LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory with all accesories including connection etc. complete in all respect.
729
-
-
Supply, installation, testing and commissioning of LED highbay suspended type luminaire madeup of pressure die cast aluminium housing to give 9500 lumens or more, minimum correlated color temperature is 5700K, CRI 80, Ingrees protection-IP 65 , LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory with all accesories including connection etc. complete in all respect.
142
-
-
Supply, installation, testing and commissioning of LED highbay suspended type luminaire madeup of pressure die cast aluminium housing to give 18000 lumens or more, minimum correlated color temperature is 5700K, CRI 80, Ingrees protection-IP 65 , LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory with all accesories including connection etc. complete in all respect.
16
-
-
Supply, Installation, testing and commissioning of Linear Recess Mounted Light to give 2500 lumens or more made out of CRCA sheet steel with acrylic diffuser, minimum correleated colour temperature is 5700K, CRI 80, Ingrees protection-IP 20, constant current output driver, LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory, with all accesories including connection etc. complete in all respect.
114
-
-
Supply, Installation, testing and commissioning of 2 feet LED batten to give 1200 lumen or more made out of extruded aluminium with diffuser and powder coated CRCA back plate, minimum correleated colour temperature is 5700K, CRI 80, Ingrees protection - IP 20, constant current output driver, LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory, with all accesories including connection etc. complete in all respect.
93
-
-
Supply, Installation, testing and commissioning of Spherical type LED Post Top to give 1800 lumens or more made out of polycarbonate diffuser suitable for Gate Pillars having highly efficient constant current electronic driver and operating voltage range from 140-280 V AC, correleated colour temperature should be 3000k, Ingress protection: IP 65, suitable for pipe entry with fixing bolt, with all accesories including connection etc. complete in all respect.
16
-
-
Supply, Installation, testing and commissioning of 4 feet LED batten to give 2000 lumen or more made out of CRCA sheet steel housing comprising of LED`s with diffuser, minimum correleated colour temperature is 5700K, CRI 80, Ingrees protection- IP 20, constant current output driver, LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory, with all accesories including connection etc. complete in all respect.
216
-
-
Supply, Installation, testing and commissioning of 4 feet LED batten to give 4000 lumen or more made out of CRCA sheet steel housing comprising of LED`s with diffuser, minimum correleated colour temperature is 5700K, CRI 80, Ingrees protection- IP 20, constant current output driver, LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory, with all accesories including connection etc. complete in all respect.
488
-
-
Supply, Installation, testing and commissioning of surface decorative wall mounting LED bulkhead fittings to give 600 lumen or more made out of High pressure die cast aluminium with polycarbonate front diffuser, minimum correleated colour temperature is 5700K, CRI 80, Ingrees protection- IP 66, constant current output driver, LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory, with all accesories including connection etc. complete in all respect.
493
-
-
Supplying of white colour blades ceiling fans of following sizes capacitor type complete with down rod canopies, hanging shackles, blades, without requlator suitable for use on 220/240 volts 50 Hz. Single Phase A.C. supply conforming to IS-374/1979 class I as desired.
-
-
-
1400 mm sweep
184
-
-
1200 mm sweep
842
-
-
600 mm sweep
41
-
-
Supply and installation of wall bracket fan of 400 mm sweep fitted with inbuilt regulator complete with fan motor, blades & fixing arrangement on wall with all accessories etc. as required.
25
-
-
Supply and installation of wall mounting Heavy duty bracket fan metal type of 600 mm sweep fitted with inbuilt regulator complete with fan motor, blades & fixing arrangement on wall with all accessories etc. as required.
64
-
-
Supply of Fiber Type Exhaust fan 250 mm dia ,900 RPM 220/230 V complete with louvers ,shutter , blades etc as required.
101
-
-
Supply of Fiber Type Exhaust fan 300 mm dia ,900 RPM 220/230 V complete with louvers ,shutter , blades etc as required.
35
-
-
Supply of 380 mm dia, 900 RPM Heavy Duty exhaust fan metal type suitable for 220/240 Volts 50 Hz., single Phase AC supply complete with shutter etc. as required.
86
-
-
Supply of 450 mm dia, 1400 RPM H.D exhaust fan metal type suitable for 220/240 Volts 50 Hz., single Phase AC supply complete with shutter etc. as required.
31
-
-
Supply, Installation, testing and commissioning of 25 Litres Water Heater geyzer having copper tank complete with pre-set thermal cut out , heating element etc. complete as required.
10
-
-
Supply, Installation, testing and commissioning of automatic hand dryer 1100 watt or more upto 1650 watt , ABS plastic body white colour complete with pre-set thermal etc. as required.
10
-
-
Main L.T panel for PTB Barrack (G.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 800 Amp TPN, complete with Termaination Box for incomer, interconnection, Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required. (Note :- Provsion should be made in Incomer for 2 Nos. 3.5 X 400 sq mm cable)
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
800 A 4P MCCB 37 KA- 1 no.
-
-
-
Outgoing
-
-
-
300 A 4P MCCB 25 KA -2 nos.
-
-
-
400 A 4P MCCB 18 KA - 2 nos.
-
-
-
150 A 4P MCCB 25 KA - 1 nos.
-
-
-
Sub panel for PTB Barrack(G.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415V electrolitic Aluminium Bus Bar 300 Amp TPN, complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
300 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
150 A 4P MCCB 25 KA - 3 nos.
-
-
-
Sub panel for PTB Barrack(F.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 500 Amp TPN, complete with Termaination Box for incomer,interconnection, Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required. (Note :- Provsion should be made in Incomer for 2 Nos. 3.5 X 240 sq mm cable)
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
500 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
250 A 4P MCCB 25 KA - 3 nos.
-
-
-
Sub panel for PTB Barrack(S.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 200 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
150 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
100 A 4P MCCB 25 KA - 3 nos.
-
-
-
Sub Board for PTB (G.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 200 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
2
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
150 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
40 A 4P MCCB 18 KA - 5 nos.
-
-
-
32 A DP MCB 10KA - 9 Nos.
-
-
-
Sub Board for PTB (F.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 300 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
2
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
250 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
40 A 4P MCCB 18 KA - 3 nos.
-
-
-
60 A 4P MCCB 18 KA - 3 nos.
-
-
-
32 A DP MCB 10KA - 20 Nos.
-
-
-
Sub Board for PTB (S.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 100 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
2
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
100 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
40 A 4P MCCB 18 KA - 5 nos.
-
-
-
32 A DP MCB 10KA - 4 Nos.
-
-
-
Main L.T panel for Cargo Building (G.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415V electrolitic Aluminium Bus Bar 500 Amp TPN, complete with Termaination Box for incomer, interconnection, Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required. (Note :- Provsion should be made in Incomer for 2 Nos. 3.5 X 400 sq mm cable)
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
500 A 4P MCCB 37 KA- 1 no.
-
-
-
Outgoing
-
-
-
250 A 4P MCCB 25 KA -3 nos.
-
-
-
Sub panel for Cargo Terminal (G.F &F.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 300 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
2
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
250 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
150 A 4P MCCB 25 KA - 3 nos.
-
-
-
Sub Board for Cargo terminal (G.F&F.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 200 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
4
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
150 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
30 A 4P MCCB 18 KA - 3 nos.
-
-
-
60 A 4P MCCB 18 KA - 2 nos.
-
-
-
32 A DP MCB 10KA - 9 Nos.
-
-
-
Main L.T panel for Quarantine Building (G.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 500 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
500 A 4P MCCB 37 KA- 1 no.
-
-
-
Outgoing
-
-
-
250 A 4P MCCB 25 KA -3 nos.
-
-
-
Sub panel for Quarantine Building (G.F &F.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 300 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
2
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
250 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
150 A 4P MCCB 25 KA - 3 nos.
-
-
-
Sub Board for Quarantine Building (G.F&F.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 200 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
4
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
150 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
30 A 4P MCCB 18 KA - 2 nos.
-
-
-
60 A 4P MCCB 18 KA - 2 nos.
-
-
-
32 A DP MCB 10KA - 11 Nos.
-
-
-
L.T panel for Officer Barrack (G.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 300 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:- (Note - Make provision in Incomer for looping of the First floor Officer's Barrack)
-
-
-
Incomer
-
-
-
100 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
25 A 4P MCCB 18 KA -3 nos.
-
-
-
40 A 4P MCCB 18 KA -3 nos.
-
-
-
32 A DP MCB 10KA - 7 Nos.
-
-
-
L.T panel for Officer Barrack (F.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 200 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
150 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
25 A 4P MCCB 18 KA -3 nos.
-
-
-
40 A 4P MCCB 18 KA -3 nos.
-
-
-
32 A DP MCB 10KA - 10 Nos.
-
-
-
Main L.T panel for Jawan Barrack (Block -I & II ) (G.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 500 Amp TPN, complete with Termaination Box for incomer,interconnection, Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required. (Note :- Provsion should be made in Incomer for 2 Nos. 3.5 X 400 sq mm cable)
2
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
500 A 4P MCCB 37 KA- 1 no.
-
-
-
Outgoing
-
-
-
250 A 4P MCCB 25 KA -3 nos.
-
-
-
Sub panel for Jawan Barrack
(Block -I & II) (G.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 200 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
2
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
175 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
75 A 4P MCCB 25 KA - 3 nos.
-
-
-
Sub panel for Jawan Barrack
(Block - I & II) (F.F & S.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 200 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
4
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
150 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
100 A 4P MCCB 25 KA - 3 nos.
-
-
-
Sub Board for Jawan Barrack
(Block - I & II) (G.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 100 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
4
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
75 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
30 A 4P MCCB 18 KA - 2 nos.
-
-
-
40 A 4P MCCB 18 KA - 2 nos.
-
-
-
32 A DP MCB 10KA - 5 Nos.
-
-
-
Sub Board for Jawan Barrack
(Block - I & II) (F.F & S.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 150 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
8
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
100 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
30 A 4P MCCB 18 KA - 2 nos.
-
-
-
60 A 4P MCCB 18 KA - 2 nos.
-
-
-
32 A DP MCB 10KA - 3 Nos.
-
-
-
Sub Panel for Subordinate Barrack (G.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 200 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:- (Note - Make provision in Incomer for looping of the First floor Subordinate Barrack)
-
-
-
Incomer
-
-
-
100 A 4P MCCB 25 KA- 1 Nos.
-
-
-
Outgoing
-
-
-
25 A 4P MCCB 18 KA - 3 Nos.
-
-
-
40 A 4P MCCB 18 KA - 3 Nos.
-
-
-
32 A DP MCB 10KA - 7 Nos.
-
-
-
Sub Panel for Subordinate Barrack (F.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 100 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
75 A 4P MCCB 25 KA- 1 Nos.
-
-
-
Outgoing
-
-
-
25 A 4P MCCB 18 KA - 3 Nos.
-
-
-
40 A 4P MCCB 18 KA - 3 Nos.
-
-
-
32 A DP MCB 10KA - 2 Nos.
-
-
-
L.T panel for Mahila Barrack (G.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 150 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:- (Note - Make provision in Incomer for looping of the First floor Mahila Barrack)
-
-
-
Incomer
-
-
-
75 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
25 A DP MCB 10 KA -3 nos.
-
-
-
40 A DP MCB 10 KA -3 nos.
-
-
-
32 A DP MCB 10KA - 3 Nos.
-
-
-
L.T panel for Mahila Barrack (F.F)
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 100 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
60 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
25 A DP MCB 10 KA -3 nos.
-
-
-
40 A DP MCB 10 KA -3 nos.
-
-
-
32 A DP MCB 10KA - 2 Nos.
-
-
-
Panel for WareHouse EXPORT
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 100 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
100 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
40 A 4P MCCB 18 KA - 2 nos.
-
-
-
30 A 4P MCCB 18 KA - 4 nos.
-
-
-
Panel for WareHouse IMPORT
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 400 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
1
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
300 A 4P MCCB 37 KA- 1 no.
-
-
-
Outgoing
-
-
-
250 A 4P MCCB 25 KA- 2 no.
-
-
-
40 A 4P MCCB 18 KA - 2 nos.
-
-
-
30 A 4P MCCB 18 KA - 4 nos.
-
-
-
Sub Board for Gate Complex
-
-
-
Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 100 Amp TPN , complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required.
2
-
-
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires following mounting as:-
-
-
-
Incomer
-
-
-
75 A 4P MCCB 25 KA- 1 no.
-
-
-
Outgoing
-
-
-
40 A 4P MCCB 18 KA - 3 nos.
-
-
-
20 A 4P MCCB 18 KA - 3 nos.
-
-
-
FEEDER PILLARS
-
-
-
Supply,installation, testing & commissioning of External Lighting Panels double door, compartmentalised & slanting roof (300mm extended), suitable for 3 phase, 4 wire, 415Volt, 50Hz, AC supply, totally enclosed free standing , weather and vermin proof outdoor type fabricated from 2 mm thick CRCA sheet steel with aluminium busbars ,earth bus, lockiing arrangement, cable alley, gland plate complete as required including associated civil works like excavation, brick work, plaster and providing & fixing below noted accessories and with following incoming & outgoings:
-
-
-
Feeder Pillar No.-1
-
-
-
Supplying, installing, testing & commissioning of compartmentalised floor mounted cubicle board made from 2 mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 200 A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:
1
-
-
Incomer
-
-
-
1 No. 175 A, TP MCCB 25 kA thermal magnetic O/L & S/C release, handle & equipped with phase indicating lights, on/off indicating light, start/stop push bottom & control circuit MCBs.
-
-
-
Outgoing
-
-
-
100 A 4P MCCB 18 kA - 2 nos.
-
-
-
16 A 4P MCB 10 kA - 5 nos.
-
-
-
32 A 4P MCB 10 kA - 2 nos.
-
-
-
Feeder Pillar No.-2
-
-
-
Supplying, installing, testing & commissioning of compartmentalised floor mounted cubicle board made from 2 mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 150 A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:
1
-
-
Incomer
-
-
-
1 No. 100 A, TP MCCB 25 kA thermal magnetic O/L & S/C release, handle & equipped with phase indicating lights, on/off indicating light, start/stop push bottom & control circuit MCBs.
-
-
-
Outgoing
-
-
-
16 A 4P MCB 10 kA - 5 nos.
-
-
-
32 A 4P MCB 10 kA - 2 nos.
-
-
-
Feeder Pillar No.-3
-
-
-
Supplying, installing, testing & commissioning of compartmentalised floor mounted cubicle board made from 2 mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 300 A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:
1
-
-
Incomer
-
-
-
1 No. 250 A, TP MCCB 25 kA thermal magnetic O/L & S/C release, handle & equipped with phase indicating lights, on/off indicating light, start/stop push bottom & control circuit MCBs.
-
-
-
Outgoing
-
-
-
150 A 4P MCCB 18 kA - 2 nos.
-
-
-
60 4P MCCB 18 kA - 2 nos.
-
-
-
16 A 4P MCB 10 kA - 2 nos.
-
-
-
Feeder Pillar No. - 4
-
-
-
Supplying, installing, testing & commissioning of compartmentalised floor mounted cubicle board made from 2 mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 150 A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:
1
-
-
Incomer
-
-
-
1 No. 100 A, TP MCCB 25 kA thermal magnetic O/L & S/C release, handle & equipped with phase indicating lights, on/off indicating light, start/stop push bottom & control circuit MCBs.
-
-
-
Outgoing
-
-
-
75 A 4P MCCB 18 kA - 2 nos.
-
-
-
16 A 4P MCB 10 kA - 8 nos.
-
-
-
Feeder Pillar No. - 5 & 7
-
-
-
Supplying, installing, testing & commissioning of compartmentalised floor mounted cubicle board made from 2 mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 150 A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:
2
-
-
Incomer
-
-
-
1 No. 100 A, TP MCCB 25 kA thermal magnetic O/L & S/C release, handle & equipped with phase indicating lights, on/off indicating light, start/stop push bottom & control circuit MCBs.
-
-
-
Outgoing
-
-
-
16 A 4P MCB 10 kA - 8 nos.
-
-
-
32 A 4P MCB 10 kA - 3 nos.
-
-
-
Feeder Pillar No. - 6
-
-
-
Supplying, installing, testing & commissioning of compartmentalised floor mounted cubicle board made from 2 mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 150 A 4 strip Al. Busbar complete with termination Box, interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required: (Note :- Provsion should be made in Incomer for 2 Nos. 3.5 X 240 sq mm cable)
1
-
-
Incomer
-
-
-
1 No. 100 A, TP MCCB 25 kA thermal magnetic O/L & S/C release, handle & equipped with phase indicating lights, on/off indicating light, start/stop push bottom & control circuit MCBs.
-
-
-
Outgoing
-
-
-
75 A 4P MCCB 18 kA - 2 nos.
-
-
-
16 A 4P MCB 10 kA - 8 nos.
-
-
-
Sub Head - 06 (Sub-station)
-
-
-
Supply, installation, testing & commissioning of two pole structure for receiving 11KV supply SEB meter with 11 KV , 3 pole gang operated switch along with drop out fuse and L A etc. complete as required
1
-
-
HT Panel
-
-
-
Supply, installation, testing & commissioning of indoor type floor mounted metal clad, 11 KV VCBs,panel with 3 nos VCB, totally enclosed & fully interlocked, horizontal drawout, horizontal isolation type breaker as per IS 13118, as amended up to date having capacity as mentioned below, single break, trip free mechanism, manual charged and auto/manually closing breaker suitable for use on 11 KV, 3 Phase, 50Hz A.C. supply with short circuit fault level of 350 MVA complete with self contained, fully interlocked ,rack in and rack out mechanism, air insulated but encapsulated copper bus bars of 630 Amps capacity, breaker featured with mechnical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4 NO+4 NC and equipped with following switchgears and accessories i/e connections suitable for 3 x 240 sqmm. XLPE 11 KV aluminium cable(cable entry from bottom / top as per site condition), end termination with heat shrinkable jointing material etc. as required.
1
-
-
Incoming - 1No. 630 Amp VCB with the following
-
-
-
1 No. -11 KV /110 Volts PT class 0.5 accuracy and 100 VA burden with 1 No. volmeter (0-15KV), digital type, selector switch for volmeter and protection fuses /MCB for HT metering upto 12 KV on incomer.
-
-
-
1 No. -(0-300A) dual scale Ammeter, digital type, selector switches for ammeters.
-
-
-
1 No -Microprocessor based numerical relay with O/L, E/F and S/C protection.
-
-
-
2 Nos. -set of dual core dual ratio 3 CT's 300/150/5/5 A of 15 VA burden and accuracy class -0.5 for metering and class 5P10 for protection.
-
-
-
Outgoing -2 Nos 630 A VCB extendable type with the following
-
-
-
2 nos -(0-100A) Ammeters, dual scale digital type & selector switches for Ammeters.
-
-
-
2 Nos - Microprocessor based numerical relays with O/L, E/F & S/C protections.
-
-
-
1 No. -set of dual core dual ratio 3 CTs 100/50/5/5 A of 15 VA burden and accuracy class-1.0 for metering an class 5P10 for protection.
-
-
-
Supplying, Installation, testing and commissioning of the following for metering and protection
-
-
-
Lead acid 24V storage battery of suitable ampere hour capacity suitable for 11 KV panels in HT panel room.
-
-
-
Float trick charger suitable for above items for 30 volts DC
-
-
-
DC distribution board suitable for above application including tripping, closing and indication etc.,
-
-
-
Control cabling between DC distribution panel to HT panel with cable size 4 core 2.5 sq. mm copper cable
-
-
-
control cabling between transformer and panel using armoured PVC insulated copper conductor of appropriate cores for indication and alarm etc.,as required.
-
-
-
Transformer
-
-
-
Supplying, installation, testing and commissioning of Cast Rasin Dry type 2000 kVA, 11/0.433 KV,3 Phase, 50 Hz Dyn 11 vector group , copper wound , class F insulation associated with winding temperature indicator , controller actuated by means of resistance tempertature detector embedded in LV winding , Indoor type transformer with approximately 5 % impedence tapping for off load operation on HV side , +5% to - 10 % having steps of 2.5 %, having cable end boxes on HV side suitable for 3 x 240 sqmm XLPE cable of 11 KV grade and 4000 amp bus trunking arrangement on LV side with neutral brought out separetly including supplying and laying of copper conductor multicore control cable from transformer to HT breaker for safety , tripping , suitably mounted on M.S canneli/c supplying and groutning of suitable M.S cannel with all accessories and confirming to IS 2026 / 11171 : 1985 with latest amendement and as per specification complete in all respects as required.
1
-
-
Automatic Power Factor Correction PanelL (APFC) (TTA Type)
-
-
-
Design, manufacture, supply, storing, inspection, handling, assembling, installation in correct alignment, position, affecting proper connections, testing and commissioning of 14 SWG CRCA sheet steel fabricated cubical type 600 KVAR APFC Panel APP/MDXL type consisting of, 3 nos. 100 KVAR, 3 nos. 50 KVAR 4 nos. 25 KVAR and 4 nos. 12.5 KVAR complete with 1 no 12 step APFC relay etc., in tier formation, housed in an integrated cubicle type automatic switching ON and OFF control panel, floor mounting, dust & virmin proof, front operated construction, enclosure class - IP 52, Painting by one coat of red oxide primer with two coats of approved synthetic enamel paint complete with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2,5 sq. mm. copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 440 Volts, 3 phase 50 Hz, suitable capacitor duty contineous to be used for switching etc., as required.
1
-
-
DG Set
-
-
-
Supply, Installing, Testing and Commissioning of ‘Silent Type’ Diesel Generating set complying to CPCB -2 Norm alongwith having Prime Power Rating of 750 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system with controller for auto synchronizing & load sharing facility and consisting of the followings:
1
-
-
Diesel Engine:
-
-
-
Diesel engine 4 stroke water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories
-
-
-
Engine mounted Instrument Panel fitted with and having digital display for following:
-
-
-
Start- Stop switch with key
-
-
-
Water temperature indication
-
-
-
Lubrication oil pressure indication
-
-
-
Lubrication oil temperature indication
-
-
-
Battery charging indication
-
-
-
RPM indication
-
-
-
Over speed indication
-
-
-
Low lub. Oil trip indication
-
-
-
Engine Hours indication
-
-
-
Alternator :
-
-
-
Synchronous alternator rated at 750 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class- F/H insulation.
-
-
-
Base Frame & Foundation:
-
-
-
Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer.
-
-
-
Fuel Tank:
-
-
-
Daily service fuel tank of 990 liters capacity fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications.
-
-
-
Exhaust System:
-
-
-
Dry exhaust mainfold with hospital exhaust silencer.
-
-
-
Starting System:
-
-
-
12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (25 plates, 180 Amp. Hour capacity lead acid type) as required as per specifications.
-
-
-
Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications
-
-
-
PCC controller for Synchronization of DG set
-
-
-
Supply, Installing, Testing and Commissioning of ‘Silent Type’ Diesel Generating set complying to CPCB -2 Norm alongwith having Prime Power Rating of 500 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system with controller for auto synchronizing & load sharing facility and consisting of the followings:
1
-
-
Diesel Engine:
-
-
-
Diesel engine 4 stroke water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories.
-
-
-
Engine mounted Instrument Panel fitted with and having digital display for following:
-
-
-
Start- Stop switch with key
-
-
-
Water temperature indication
-
-
-
Lubrication oil pressure indication
-
-
-
Lubrication oil temperature indication
-
-
-
Battery charging indication
-
-
-
RPM indication
-
-
-
Over speed indication
-
-
-
Low lub. Oil trip indication
-
-
-
Engine Hours indication
-
-
-
Alternator :
-
-
-
Synchronous alternator rated at 500 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class- F/H insulation.
-
-
-
Base Frame & Foundation:
-
-
-
Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer.
-
-
-
Fuel Tank:
-
-
-
Daily service fuel tank of 690 liters capacity fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications.
-
-
-
Exhaust System:
-
-
-
Dry exhaust mainfold with hospital exhaust silencer.
-
-
-
Starting System:
-
-
-
12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (25 plates, 180 Amp. Hour capacity lead acid type) as required as per specifications.
-
-
-
Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications
-
-
-
PCC controller for Synchronization of DG set
-
-
-
Supply, Installing, Testing and Commissioning of ‘Silent Type’ Diesel Generating set complying to CPCB -2 Norm alongwith having Prime Power Rating of 250 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system with controller for auto synchronizing & load sharing facility and consisting of the followings:
1
-
-
Diesel engine 4 stroke water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories
-
-
-
Engine mounted Instrument Panel fitted with and having digital display for following:
-
-
-
Start- Stop switch with key
-
-
-
Water temperature indication
-
-
-
Lubrication oil pressure indication
-
-
-
Lubrication oil temperature indication
-
-
-
Battery charging indication
-
-
-
RPM indication
-
-
-
Over speed indication
-
-
-
Low lub. Oil trip indication
-
-
-
Engine Hours indication
-
-
-
Alternator :
-
-
-
Synchronous alternator rated at 250 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class- F/H insulation.
-
-
-
Base Frame & Foundation:
-
-
-
Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer.
-
-
-
Fuel Tank:
-
-
-
Daily service fuel tank of 300 liters capacity fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications.
-
-
-
Exhaust System:
-
-
-
Dry exhaust mainfold with hospital exhaust silencer.
-
-
-
Starting System:
-
-
-
12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (25 plates, 180 Amp. Hour capacity lead acid type) as required as per specifications.
-
-
-
Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications
-
-
-
PCC controller for Synchronization of DG set
-
-
-
LT Panel for Sub - station (TTA Type)
-
-
-
Supplying, installation, testing and commissioning of cubicle type LT cum D G Auto / Manual Synchronization PLC based panel for synchronization of DG Set suitable for 415 V, 3 Phase, 4 wire 50 HZ AC supply system having front surface area as per approved drawing fabricated in comparmentalized design from CRCA sheet steel of 2 mm thick , 3 mm thick for gland, plates including cleaning and finishing complete with 7 tank process for powder coating in approved shade, having 4000 Amp capacity extensible type TPN aluminium alloy bus bars of high conductivity, DMC/SMC bus bars of high conductivity, DMC/SMC bus bar supports, with short circuit withstand capacity of 31 MVA for 1 sec, bottom base channel of MS section not less than 100 mm x 50 mm x5 mm at the rear with 2 nos. earth stud, solid connectons from main bus bar to switch gears with required size of Al. bus bars and control wiring with 1.5 sq. mm. PVC insulated copper conductor S/C cable, cable alleys, cable gland plated in two half, including providing following switch gears:-
1
-
-
(I) Incoming :
-
-
-
2 Nos. 4000 Amp , 1 Nos. 1600 Amp & 1 Nos. 1000 Amp each four pole horizontal drawout type air circuit breaker of fault breaking capacity 65 kA respectively and 1 Nos. 500 Amp four pole MCCB of fault breaking capacity 65 kA ( Ics= Icu upto 433V manually operated , fitted with interlocked door , automatic safety shutters, mechanical ON/ OFF and service / test / isolated position indicators and frame earthing contact , conforming to IS 1397-2 :1993 as amended up-to-date complete with following accessories for each ACB / MCCB.
-
-
-
(A) Independent manual spring closing mechanism -1 No.
-
-
-
(B) microprocessor release (EMI & EMC certified) for over current , earth fault & short circuit protection - 1 set .
-
-
-
(C) analog 96mm square flush pattern/ digital type voltmeter (0-500V), with selector switch & back up HRC fuses/MCB-1 set .
-
-
-
(D) Analog 96mm square flush pattern/ digital type ammeter (0-4000 Amp) , with selector switch and one set of 3 Nos. CT`s of ratio 4000 /5A Class I accuracy and 15 VA burden - 1set (ratio to be filled up )
-
-
-
(E) 3Nos. phase indication LED lamps with 2Amp back up HRC fuse , breaker `On` indicating light with 2A HRC fuse , test terminal block set, fuses, circuits as per standard practice , auxilliary contacts for positive interlocking of the breakers as required .
-
-
-
(F) Shunt trip coil 220V A.C
-
-
-
(II) Bus Couplers :
-
-
-
2 Nos 4000 Amps horizontal four pole drawout type , air circuit breaker of fault breaking capacity 65 kA ( Ics=Icu upto 433V ) manually operated , with interlocked door , automatic safety shutters , mechanical ON/OFF and service /test/isolated position indicators and frame earthing contact conforming to IS 13947-2:1993 as amended upto date complete with following accessories.
-
-
-
(A) Independent manual spring closing mechanism -1 No.
-
-
-
(B) Breaker `ON` indicating light with back up 2A HRc fuse test termina block , fuses , circuits contactors for positive electrical interlocking of breaker , etc as required - 1 set
-
-
-
(III) Bus Bars:
-
-
-
TPN aluminium bus bars of minimum of 4000 Amps capacity with heat shrinkabe coloured sleeves and including DMC/SMC bus bar cross section, size supports & their spacing etc. for withstanding fault level of 31 MVA for 1 sec.
-
-
-
(IV) Interlocking:
-
-
-
Electrical throuth advance contacts in MCCB/ACB's (incomers & bus couplers) and mechanical ( castel key) interloking should be provided to ensure that only one supply is available at a time on each section of bus and to eliminated any possibility of accidentally approaching two supplies at one bus section.
-
-
-
1. Outgoing :
-
-
-
1000A 4P 50 kA Draw Out Type ACB-2 Nos.
-
-
-
800 A 4P 50 kA Draw OutType ACB - 2 Nos.
-
-
-
500A 4P 50 kA MCCB - 5 Nos
-
-
-
300A 4P 50 kA MCCB - 2 Nos.
-
-
-
250A 4P 50 kA MCCB - 3 Nos.
-
-
-
200A 4P 50 kA MCCB - 2 Nos.
-
-
-
125A 4P 50 kA MCCB - 3 Nos.
-
-
-
100A 4P 50 kA MCCB - 4 Nos.
-
-
-
40A 4P 50 kA MCCB - 1 Nos.
-
-
-
(Weigh Bridge)
-
-
-
Supply, installation, testing & commissioning of Weigh bridge 100 T capacity including control panel, cabling & Remote display complete in all respect ( Pitless Type).
4
-
-
(External Electrification)
-
-
-
Supply, installation, testing and commissioning of LED street light to give 7000 lumens or more suitable for 7 meter high existing pole & made out of Pressure die cast aluminium housing with weather proof gasket for lamp and control gear, ingress protection of IP 65/66,CRI /=70, minimum correleated colour temperature is 5700K, suitable for installation on 7 meter high existing pole complete with control gear with extruded aluminium painted housing, a toughened glass cover with constant current driver. LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory with all accesories including connection etc. complete in all respect
86
-
-
Supply, installation, testing and commissioning of LED street light to give 1400 lumens or more suitable for 3 meter high existing pole & made out of Pressure die cast aluminium housing with weather proof gasket for lamp and control gear, ingress protection of IP 65/66,CRI /=70, minimum correleated colour temperature is 5700K, suitable for installation on 3 meter high existing pole complete with control gear with extruded aluminium painted housing, a toughened glass cover with constant current driver. LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory with all accesories including connection etc. complete in all respect
160
-
-
Supply , Installation , testing and commissioning of LED Flood Light to give 11000 lumens or more suitable for 5 meter high existing pole & made out of Pressure die cast aluminium housing designed to act as heat sink for efficient dissipation of heat. Heat resistant toughened glass is provided with gasket and SS clips to ensure ingress protection of IP 65, CRI /=70, minimum correleated colour temperature is 5700K with constant current output driver, LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory with all accesories including connection etc. complete in all respect.
8
-
-
Supply , Installation , testing and commissioning of Hexagonal Type LED Post Top to give 3300 lumens or more suitable for 3 meter high existing pole & made out of acrylic clear diffuser having highly efficient constant current driver and operating voltage range from 140-280 V AC, correleated colour temperature should be 3000k, Ingress protection: IP 65, suitable for pipe entry with fixing bolt, with all accesories including connection etc. complete in all respect.
78
-
-
Supply, installation, testing and commissioning of base mounted above ground 7 meter long Hot Dip Galvanized Octagonal Poles with a galvanizing thickness of minimum 65 micron (Internally & Externally) with 500 mm single side bracket suitable for installing LED street light fitting . 130 mm dia at the bottom and 70 mm dia at top with 3 mm sheet thickness with base plate of 220 mm x 220 mm x 12 mm thickness fitted with minimum 20 mm dia & 700 mm length anchor bolt, cable entry pipe, pole shall be provided integral service connection box consisting 1 Nos. 6 Amp SPMCB , Neutral link and 16 Amp heavy dulty brass connector and suitable size 6 mm thick backelite plate including connection from fitting to MCB with 1.5 sqmm wire and suitable foundation complete in all respect including all necessary item etc. as required.
86
-
-
Supply, installation, testing and commissioning of base mounted above ground 5 meter long Hot Dip Galvanized Octagonal Poles with a galvanizing thickness of minimum 65 micron (Internally & Externally) suitable for installing LED Flood Light .130 mm dia at the bottom and 70 mm dia at top with 3 mm sheet thickness with base plate of 200 mm x 200 mm x 12 mm thickness fitted with minimum 16 mm dia & 600 mm length anchor bolt, cable entry pipe, pole shall be provided integral service connection box consisting 1 Nos. 6 Amp SPMCB , Neutral link and 16 Amp heavy dulty brass connector and suitable size 6 mm thick backelite plate including connection from fitting to MCB with 1.5 sqmm wire and suitable foundation complete in all respect including all necessary item etc. as required.
8
-
-
Supply, installation, testing and commissioning of base mounted above ground 3 meter long Hot Dip Galvanized Octagonal Poles with a galvanizing thickness of minimum 65 micron (Internally & Externally) with 500 mm single side bracket suitable for installing LED street light fitting for Boundary wall. 130 mm dia at the bottom and 70 mm dia at top with 3 mm sheet thickness with base plate of 200 mm x 200 mm x 12 mm thickness fitted with minimum 16 mm dia & 450 mm length anchor bolt, cable entry pipe, pole shall be provided integral service connection box consisting 1 Nos. 6 Amp SPMCB , Neutral link and 16 Amp heavy dulty brass connector and suitable size 6 mm thick backelite plate including connection from fitting to MCB with 1.5 sqmm wire and suitable foundation complete in all respect including all necessary item etc. as required.
160
-
-
Supply, installation, testing and commissioning of base mounted above ground 3 meter long Hot Dip Galvanized Octagonal Poles with a galvanizing thickness of minimum 65 micron (Internally & Externally) suitable for installing LED Post Top fitting. 130 mm dia at the bottom and 70 mm dia at top with 3 mm sheet thickness with base plate of 200 mm x 200 mm x 12 mm thickness fitted with minimum 16 mm dia & 450 mm length anchor bolt, cable entry pipe, pole shall be provided integral service connection box consisting 1 Nos. 6 Amp SPMCB , Neutral link and 16 Amp heavy dulty brass connector and suitable size 6 mm thick backelite plate including connection from fitting to MCB with 1.5 sqmm wire and suitable foundation complete in all respect including all necessary item etc. as required.
78
-
-
Supply , Installation , testing and commissioning of LED Flood Light to give 35500 lumens or more suitable for 30 Meter High Mast made out of Pressure die cast aluminium housing designed to act as heat sink for efficient dissipation of heat. Heat resistant toughened glass is provided with gasket and SS clips to ensure ingress protection of IP 65,CRI/=70, minimum correleated colour temperature is 5700K, constant current output driver, LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory with all accesories including connection etc. complete in all respect.
63
-
-
Design, Supply, Installation, testing & commissioning of 30 Meter High Mast raising and lowering type complete with R.C.C foundation to suit the existing soil condition complete in all respect with the followings
7
-
-
Lantern carriage for holding required no. of LED flood fight fitting and control gear.
-
-
-
Mechanical Arrangement with winch top pully, stainless steel wire rope for installation and maintenance of Lantern carriage assembly
-
-
-
Power cable , Pulg sockets, Terminal boxes and earth terminals etc.
-
-
-
Fixing of required no. of 9 nos. LED Flood lights and control gear, (minimum fittings required : 9 nos. LED Flood Light fittings to give 35500 lumens or more) including aiming & setting right the aiming angle complete as required but excluding fittings and fixtures.
-
-
-
Supply and fixing of lightning arrestor and double neon type aviation obstruction light.
-
-
-
Design,Supply, Installation, Testing & commissioning of control panel for above all including auto manual operation of the High Mast as required.
-
-
-
Fabrication and supplying of winch driving power tool with electronic motor, remote switch, manual handle for operating winch with torque limiter etc. complete as required.
2
-
-
Supply , Installation , testing and commissioning of LED Flood Light to give 24500 lumens or more suitable for 16 Meter High Mast made out of Pressure die cast aluminium housing designed to act as heat sink for efficient dissipation of heat. Heat resistant toughened glass is provided with gasket and SS clips to ensure ingress protection of IP 65,CRI/=70,minimum correleated colour temperature is 5700K, constant current output driver, LM 79 & LM 80 reports needs to be submitted from a NABL/UL approved laboratory with all accesories including connection etc. complete in all respect.
45
-
-
Design, Supply, Installation, testing & commissioning of 16 Meter High Mast raising and lowering type complete with R.C.C foundation to suit the existing soil condition complete in all respect with the followings
5
-
-
Lantern carriage for holding required no. of LED flood fight fitting and control gear.
-
-
-
Mechanical Arrangement with winch top pully, stainless steel wire rope for installation and maintenance of Lantern carriage assembly
-
-
-
Power cable , Pulg sockets, Terminal boxes and earth terminals etc.
-
-
-
Fixing of required no. of 9 nos. LED Flood lights and control gear, (minimum fittings required : 9 nos. LED Flood Light fittings to give 24500 lumens or more) including aiming & setting right the aiming angle complete as required but excluding fittings and fixtures.
-
-
-
Supply and fixing of lightning arrestor and double neon type aviation obstruction light.
-
-
-
Design, Supply, Installation, Testing & commissioning of control panel for above all including auto manual operation of the High Mast as required.
-
-
-
Providing and fixing carbon dioxide (CO2) type fire extinguishers conforming to IS 2878 - 1976 and cylinders fully charged of following capacity.
-
-
-
4.5 Kg.
7
-
-
Supply and fixing of foam fire extinguishers, Portable type 9 litre capacity hanged on wall with bracket complete as required.
7
-
-
Supply and fixing safety instruction chart in word duly framed with 5 mm thick glass as required. (approx. front area 1.20 sq.mt.)
4
-
-
Providing of set of 4 nos. 9.5 litre capacity GI bucket painted in post office red colour with prior coat of red-oxide paint and written with white paint 'FIRE' and mounted on M.S. angle iron frame with bracket of appropriate size and capacity including filling sand etc.
4
-
-
Providing First Aid Box as approved by St. John Ambulance Brigade / Indian Red Cross conforming to IS 2217-1963.
2
-
-
Supply and fixing shock treatment chart duly mounted on a wooden frame with 5 mm thick glass as required (approximate front area 1.20 sq.mt.)
2
-
-
Providing of rubber mat 1 mtr. wide and 12 mm thick to withstand 11 KV dielectric strength as per IS 5424-1969.
50
-
-
Providing of rubber mat 1 mtr. wide and 6 mm thick to withstand 3.3 KV dielectric strength as per IS 5424-1969.
100
-
-
Supplying 11KV grade rubber gloves as per IS.
2
-
-
Providing and fixing of Air Cooled 3 star Split air conditioner of following capacity compriising with indoor and outdoor unit having hermetically sheild rotary compressor air cooled condensing unit , condensor fan with motor , indoor fan coil unit , filtter , drain pump , power panel with remote control , inter connected insulated copper refrigent pipe , drain pipe , cabling and wiring , full charged of refrigent gas and oil , M.S base frame etc for outdoor unit complete as required
-
-
-
1.5 TR (4500 KCL) Nominal Capacity of Outdoor unit (with single Rotary Compressor) & indoor Units
61
-
-
2.0/2.2 TR (6000 KCL) Nominal Capacity of Outdoor unit (with single Rotary Compressor) & indoor Units
66
-
-
Supply, Installation, testing and commissioning of Automatic Voltage stabilizer complete with HI‐LOW voltage cut out , TDR and Power wiring from Stabilizer to Unit as per specifications, complete in all respect as required.
-
-
-
4 KVA
61
-
-
5 KVA
66
-
-
Supply, Installation, testing and commissioning of Interconnected Copper Piping (Beyond 3 mtr) (Soft/Hard both) (5/8" ,1/4" & 1/2" ,1/4") For Cassette /Ductable / Split Air conditioners, the piping duly insulated with Nitrile insulation tubes of respective sizes and control cabling from Indoor to Outdoor units including all necessary item etc. as required.
2010
-
-
Supply, Installation, testing and commissioning of 12 mm PVC flexible drain pipe beyond 3 meter above including clamping on surface including all necessary item etc. as required.
1500
-
-
Supply of Aluminium conductor PVC insulated , Unarmoured cable as per IS 1554 (Part -1 with latest amendments) 1100 volts grade as required. (Indoor Works)
-
-
-
3.5 X 25 sq mm
520
-
-
3.5 X 35 sq mm
470
-
-
3.5 X 95 sq mm
480
-
-
3.5 X 185 sq mm
110
-
-
3.5 X 240 sq mm
40
-
-
Supply of Aluminium conductor XLPE insulated cable as per IS 7098 (Part-I with latest amendment) armoured sheathed 1100 volts grade as required. (Outdoor Works)
-
-
-
4x10 Sqmm
10750
-
-
4x16 Sqmm
6240
-
-
4x35 Sqmm
910
-
-
3.5 x 95 sq.mm
1386
-
-
3.5 x 150 sq.mm
548
-
-
3.5 x 240 sq.mm
4800
-
-
3.5 x 400 sq.mm
2936
-
-
Suppy of 3 core 240 sq.mm standard aluminium conductor 11 KV grade XLPE Insulated PVC sheathed galvanised flat steel sheet armoured cable conforming to IS 7098 (Part - II with latest amendment).
500
-
-
Supply, Installation, Testing & commissionning of 43 inch Led display for 24X7 Operation with 400 NITS brightness.
10
-
-
Supply, Installation, Testing & commissionning of Client Workstation PC with dual monitor output provision as per specs.
10
-
-
Supply, Installaiton, Testing & commissioning of Layer 2, POE+ switch 24 GigE PoE 370W, 4 x 1G SFP, LAN Base with stacking cable & module, all accessories as per specs.
17
-
-
Supply, Installaiton, Testing & commissioning of Layer 2, POE+ switch 24 port GE with PoE, 4 x 1G SFP, LAN Base all accessories as per specs.
2
-
-
Supply, Installaiton, Testing & commissioning of Layer 3, 12 port Fiber Core Switch equivalent to 12 Port GE SFP IP Services with stacking cable & stacking module as per specs.
2
-
-
Supply Installation, Testing & commissioning of 1000 BASE-LX/LH SFP transceiver module, MMF /S MF, 1310nm, DOM.
24
-
-
Supply Installation, Testing & commissioning of 1000 BASE-T SFP transceiver module for Category 5 copper wire.
8
-
-
Supply, Installation, testing and commissioning of UTP 4 pair 23 AWG CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. 4 Pair CAT6 Unshielded, Twisted Pair (U/UTP) Cable 305 mtr per Box. Blue/Orange/White/Green in colour conforming to the following standards like ANSI EIA/TIA 568 C.2, EN50173, IEC 11801 3rd ED, frequency tested upto 700Mhz with Third Party Certificate etc. Cable Dia 6.1 ± 0.3, Cross-member (+) fluted Spine/isolator for uniform separation for all pairs.
45
-
-
Supply, installation, testing & commissioning of CAT6 UTP 24 AWG Patch Cord - 2 mtr with cross separator Factory crimped multistranded copper patch cord with tensile strength of 50N. Conforming to the following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL VW-1 with tensile strength 50N, number of insertion is 750.
1002
-
-
Supply, Installation, testing and commissioning of Cat6 Tool less Information outlet for Data & Voice. Cat6 U/UTP RJ45 socket with built in crimping mechanism with capability of retermination without refreshing the wires. Toolless RJ45 Information outlet with insertion cycle (in & out) should be 2500 times (I/O) along with front side Label holder and transparent shutter. The Information Outlet connector shall be of gold/nickel, thickness of gold 0.8 μm. The connectors shall be compatible as per IEEE 802.3bt standard for POE++ application.
406
-
-
Supply, installation, testing & commissioning of Single port Face Plate : Flush & surface mount. Polycarbonate Hi-Grade Plastic FR Grade with ABS underplate & CRCA metal fram & UV Resistant 850 degree C/ Glow Wire Test. The face plate should be compatible for Cat5e, Cat6 range of RJ45 and different types of AV connectors.The face plate Size should be of minimum 86x86mm.
144
-
-
Supply, installation, testing & commissioning of Double port Face Plate : Flush & surface mount. Polycarbonate Hi-Grade Plastic FR Grade with ABS underplate & CRCA metal fram & UV Resistant 850 degree C/ Glow Wire Test. The face plate should be compatible for Cat5e, Cat6 range of RJ45 and different types of AV connectors.The face plate Size should be of minimum 86x86mm.
131
-
-
Supply, Installation, testing and commissioning of 24 port Cat 6 19" Modular Toolless Patch Panel (loaded) enable all possible combinations of the various types of cable (UTP, FTP, SFTP) mounted on the same panel by using various toolless connector blocks/modules. Have a metal structure enabling them to be durably fixed to the uprights of the 19” chassis and assuring automatic grounding between toolless RJ-45 connectors, the panel, and the 19” uprights of the enclosure. Include rear cable support with plastic cable guides to hold cable without need for cable ties. Include quick mounting system to mount the panel into the 19” rails without use of cage-nuts. These may be used to secure the connections of wifi access points, IP cameras, servers, or other critical devices. Front Removal IO's option for maintenance and trouble shooting with 6 Different Colours Labels for Labelling & Identification of Individual Ports. Tested and guaranteed under dual circuit IEEE PoE++ up to 90W for up to 2500 on-load connections / disconnections.
39
-
-
Supply and fixing of 6 core indoor/outdoor Armoured OS1/OS2 Singlemode Optical Fiber of size 9/125μm. Central loose tube with jelly construction with embeded strength member (sttel wire) with antibuckling properties. Permanent tensile strength minimum 500N, Maximum installation load 1500N, Impact resistance 20Nm, Crush resistance 2000N/100mm,complying to for IEC 60793-2-50 class B.1.3,EN 60793-2-50: class B1.3, ITU Recommendation G.652.Dand confirming to EN 50 173-1:2007, cat. OS2; also OS1, ISO/IEC 11801:2002, cat.OS1, ISO/IEC 24702:2006, cat. OS2, IEEE 802.3-2002 incl. amendment 802.3ae - 2002. through existing GI/HDPE/ Hume pipe or on cable trays inside the cable duct including all necessary fixing accessories e.g. cable ties, hardware etc.
35152
-
-
Supply, Installation, testing and commissioning of 24 port LIU of 19" slide-in modular optic drawers with galvanised steel accommodates up to 4 fibre optic units, 4 cables, accommodates up to 24 ST and SC connectors and 48 LC connectors. Should meet EN50173 and ISO/IEC 11801 operating specifications.
31
-
-
Supply, Installation, testing and commissioning of 10 GB - 9/125μm OS1/OS2 SC LSZH Pigtails SM 9/125mm confirming to ITU-G651 and TIA/EIA 492AAAA standards .
744
-
-
Supply, Installation, testing and commissioning of 6 port LCS2 Adapter plate, loaded with 6 nos. of SC unit for 6 Single mode fibers of size 9/125 μm .Adapters to be compatible to fit in 19" U/UTP 24 port modular patch panel or 24 port LIU.
124
-
-
Supply, Installation, testing and commissioning of fibre stackable splicetray - 24 fibre capacity.
31
-
-
Supply, Installation, testing and commissioning of 10 GB - 9/125μm SM -SC-LC Duplex Fiber Patch Cord - 3 mtrs. Conform to IEC 61754-20,61300-2-1,61300-2-2,61300-2-4,61300-2-5 ANSI-TIA, and Telecordia performances requirements.
24
-
-
Supply, Installation, testing and commissioning of 10 GB - 9/125μm SM -SC-SC Duplex Fiber Patch Cord - 3 mtrs. Conform to IEC 61754-20,61300-2-1,61300-2-2,61300-2-4,61300-2-5 ANSI-TIA, and Telecordia performances requirements.
190
-
-
Supplying, installing, testing and commissioning of 10/100Mbps Single-Mode Media Converter
190
-
-
Supplying, installing, testing and commissioning of PoE Injector
95
-
-
Supplying, installing, testing and commissioning of 6 core Outdoor Optical Fibre Termination Box with enclosure
95
-
-
Supplying, installing, testing and commissioning of 2 Core X 1.5 Sq. mm armoured power cable
7000
-
-
Supplying, installing, testing and commissioning of 50mm outdoor HDPE Pipe.
9000
-
-
Supplying, installing, testing and commissioning of 24U cabinets with all standard accessories. Width (mm) 600, Depth (mm) - 500, Approx.Net Wt (kg) - 32, CRCA 'D' Grade thickness (mm) - 1.2, RAL 9017 (Matt Black), Glass - 4mm Toughened Tinted Glass Door, Accessories:, Cooling Fan (230V A/C 90 CFM) - 2 Nos, PDU 230VAC - 1 No, Cable Manager Metal - 3 Nos, Earthling Strips 150mm H - 1 No, Mounting Hardware (20 sets of M6 screws, washer, cage nuts (nickel coated)) - 1 No, Wall Screws (4 sets of 2'' screws, washer,rubber grommet (nickel coated)) -
1 No, Door Lock - 1 No, Front Metal Band -1 No. In the rack there must be maintained1 U = 1.75 inches space. Nos. 20 etc. complete as required.
4
-
-
Supplying, installing, testing and commissioning of 42U Cabinet. Size 2026 X 800 X 800 mm (HXWXD) following accessories, Width (mm) 800, Depth (mm) 800, Approx.Net Wt (kg) 150, CRCA 'D' Grade thickness (mm) 1.2, RAL 9017 (Matt Black), Glass: 4mm Toughened Tinted Glass Door, Injected one piece polyurethane gasket on frame, Accessories: Cooling Fan (230V A/C 90 CFM) - 4 Nos, Cable Manager Metal- 4 Nos, PDU 230VAC - 1 No (12 nos. 6A/16A sockets with plugs 6A/16A - 1/1pc & MCB 16A/32A - 0/1 Pc), Cable Channel 100mm wide 42U- 2 Nos, Heavy Duty Stationary Shelf 600mmW x 475mmD - 1 No., Mounting Hardware (20 sets of M6 screws, washer, cage nuts (nickel coated)) - 3 Nos., Earthling Strips 150mm H - 1 No, Door Lock - 1 No, Castor Wheels (with Brake) - 2 Nos, Castor Wheels (without Brake) - 2 Nos, Front Metal Band - 1 No. Packing: 5 ply cardboard & Inside 28 ply EP foam. In the rack there must be maintained 1 U = 1.75 inches space. Nos. 1 etc complete as required.
4
-
-
Supply, installation, testing and commissioning of cables, Connectors, interfaces, Mounting hardware, tags, identifiers, fixures, clamps, screws, nut - bolts etc as required for the installation and commissioning of the Systems.
1
-
-
Supply, Installation, Testing & commissionning of IP-PBX with at least 50 IP extenstions, 150 analog extensions, 6 analogue Trunk lines, 1 PRI (30 ch) card.
1
-
-
Supply, Installation, Testing & commissionning of Dual-band 802.11abgn/ac Wireless Access Point, dual ports, 802.3af PoE support, Ceiling Mount.
20
-
-
Supply, Installation, Testing & commissionning of Wireless access point management controller.
1
-
-
Supply, Installation, Testing & commissionning of Dual Ethernet port SIP telephone with graphical display, Caller ID and full duplex speaker phone.
10
-
-
Supply, Installation, Testing & commissionning of analog phone with graphical display, Caller ID and full duplex speaker phone.
113
-
-
Supply, Installation, Testing & commissionning of 100 pair Tag Block.
2
-
-
Supply, Installation, Testing & commissionning of 20 pair armoured riser cable for Telephone.
3000
-
-
Supply, installation, testing & commissioning of 3 meter GI pole for perimeter camera's.
91
-
-
Supply, installation, testing & commissioning of Penta Scanning for UTP.
501
-
-
Supply, installation, testing & commissioning of OTDR Scanning for Fiber.
462
-
-
Supply, installation, testing & commissioning of IR VERIFOCAL VANDAL DOME CAMERA - Network TDN Low-Light, 120 dB Wide Dynamic, IR Rugged Dome Camera, 1/2.7" Imager, 2 MP, 2.7-12 mm MFZ Lens, 3 IR LEDs, PoE, H.264.
32
-
-
Supply, installation, testing & commissioning of IR VARIFOCAL BULLET CAMERA (2.7-12mm) - Network TDN Low-Light, 120 dB Wide Dynamic, IR Bullet Camera, 1/2.7" Imager, 2 MP, 2.7-12 mm MFZ Lens, 4 IR LEDs, PoE, H.264.
24
-
-
Supply, installation, testing & commissioning of IR VARIFOCAL BULLET CAMERA (5-50mm) - Network TDN Low-Light, 120 dB Wide Dynamic, IR Bullet Camera, 1/2.7" Imager, 2 MP, 5-50 mm MFZ Lens, 4 IR LEDs, PoE, H.264.
24
-
-
Supply, installation, testing & commissioning of OUTDOOR PTZ CAMERA - Network TDN IR PTZ Dome, 1080p Resolution, 30 x Zoom, WDR, H.264, NTSC/PAL, IK10.
12
-
-
Supply, installation, testing & commissioning of Enterprise VMS Server - Central Management Master Server: Includes Server, Windows Server 2008 Standard 64bit, SQL Server 2008 Standard 64bit, Software License covers 300 video channels and 20 user clients.
1
-
-
Supply, installation, testing & commissioning of Network Video Recorder - "128CH @ 1080P / 256CH @ 720P HUS NVR, 24 HDDs max 144TB, RAID, Hot Swap, 1 SAS, 2 1000M Ports, ONVIF, N+1 Redundancy, NFR with Camera, Dual Power".
2
-
-
Supply, installation, testing & commissioning of PTZ Joystick.
2
-
-
Supply, installation, testing & commissioning of 4TB Enterprise Hard Disks for recording of CCTV footage.
3
-
-
Supply, Installation, Testing & commissioning of Microprocessor based 8 loop capacity , Networkable analogue addressable type fire alarm control panel with min 600 character LCD display integrated with Digital voice eveacuation system. The panel should be equipped with sufficient numbers of loop with 20% spare capacity with each loop shall have a capacity of min 128 addressable devices and 128 analog addressable devices in one loop.The panel should be fully field programmable using Qwerty key pad without use PC.Panel should operate with 240 volts addressable AC power supply, with 4000 event logs to be stored locally automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 30 min during an emergency conditions as required.The panel should have port to connect online printer. (UL 9th Edition Approved)
2
-
-
Supply, Installation, Testing & commissioning of Microprocessor based 8 loop capacity , Networkable analogue addressable type fire alarm control panel with min 600 character LCD display integrated with Digital voice eveacuation system. The panel should be equipped with sufficient numbers of loop with 20% spare capacity with each loop shall have a capacity of min 128 addressable devices and 128 analog addressable devices in one loop.The panel should be fully field programmable using Qwerty key pad without use PC.Panel should operate with 240 volts addressable AC power supply, with 4000 event logs to be stored locally automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 30 min during an emergency conditions as required.The panel should have port to connect online printer. (UL 9th Edition Approved)
2
-
-
Supplying, installing, testing and commissioning of fully featured digital voice comand station with Keypad for local annunciation and controls; status LEDs and 24 user- programmable buttons, push to talk microphone etc. The system shall be capable to supports a dedicated audio network with up to eight channels of audio, five channels of firefighter telephone communications, and control and supervision for up to 32 DAL devices. The two way communication system shall be seamlessly integrated with the main fire alarm panel and also work in stand alone mode in case of panel failure. The system shall be compatible with the fire alarm system and shall integrate directly with the fire alarm panel. The quoted rate shall also include with all necessary hardwares and accessories.
1
-
-
Supply, Installation, Testing & commissioning of High-Speed Network Communications module for connecting nodes with single-mode fiber-optic cable for connecting panels over network for greater distance having 100 Mb baud transmission rate or better. The card shall support NFPA Style 4 (Class B) operation or NFPA Style 7 (Class A) operation.
4
-
-
Supply, Installation, Testing & commissioning of Intelligent Addressable Microprocessor based Multicreteria smoke-heat detector with Base with 360 degree viewing Alarm LEDs.The detector should be intelligent to automaticly self optimise its sensitivity & can be programmed as heat mode.Code dial addressing (UL Listed and FM Listed).
866
-
-
Supply, Installation, Testing & commissioning of Intelligent Addressable Microprocessor based ROR heat detector with Base with 360 degree viewing Alarm LEDs.Code dial addressing (UL Listed).
14
-
-
Supply, Installation, Testing & commissioning of Intelligent Addressable Laser detector low profile with base with 360 degree viewing Alarm LEDs.
4
-
-
Supply, Installation, Testing & commissioning of Inteligent Addressable Dual action pull type Manual call point with key & lock aggangement to activate manual alarm.
42
-
-
Supply, Installation, Testing & commissioning of Addressable Beam Detector 70m range.
7
-
-
Supply, Installation, Testing & commissioning of Long Range Accessory Kit for beam detector for over 70m range.
2
-
-
Supply, Installation, Testing & commissioning of Directional sound speaker with voice and integral audio amplifier. 24 Volt 4 field selectable sound pulse patterns.
42
-
-
Supply, Installation, Testing & commissioning of addressable Electronic strobe with 110 Cd output at 10m. The strobe shall be addressed via additional module are also acceptable. ( UL Listed)
42
-
-
Supply, Installation, Testing & commissioning of Conventional Horn cum Strobe wired as a primary-signaling notification appliance and complying with the Americans with Disabilities Act requirements for visible signaling appliances.
3
-
-
Supply, Installation, Testing & commissioning of Addressable control module for the notification device. The module should monitor the cables for open & short circuit. (UL Listed).
42
-
-
Supply, Installation, Testing & commissioning of Addressable Relay module with form-C contact to provid fire signal for lift, AHU, Dampers, Pressurisation & Smoke extract fans.
15
-
-
Supply, Installation, Testing & commissioning of Fault Isolator module to isolate shorted dewired and loose circuits between two successive fault isolators with automatic resetting arrangment (UL listed).
72
-
-
Supply, Installation, Testing & commissioning of Addressable monitor modules to monitor NO contacts at Sprinkler Flow Switch and Door Holders. (UL Listed).
23
-
-
Supply, Installation, Testing & commissioning of PC base Graphical Repeater station for monitoring & controling of all components of fire detection system.The Application shall allow the attachment of text (TXT) files sound (WAV) files image (BMP) files and video (AVI) files to each system or sensore icon allowing additional information to be provided to the system operator for responding to the off normal.
1
-
-
Supply, Installation, Testing & commissioning of Network Repeater Panel.
1
-
-
Supply, Installation, Testing & commissioning of 2CX1.5 Sq. mm armoured FRLS cable.
10000
-
-
Supply, Installation, Testing & commissioning of 24V, 4A DC power supplies to power the Hooters / Sounders.
4
-
-
Supply, installation, testing & commissioning of EN54-16 compliant IP Based Digital Public Address & Voice Alarm system. The selected system devices like controllers and Paging Microphones, should use the TCP/IP technologies and build on the standard network platform to ensure expandability.
-
-
-
Supply, installation, testing & commissioning of 8 zone IP based, digital Voice Alarm controller expandable upto 128 zones. The voice alarm controller should be able to connect directly over Ethernet. It should have functions like the audio playing, zone control, fault monitoring, log recording, volume control and amplifier switchover. The Voice alarm controller should also have the following functions: • 255 Priorities • Time schedule broadcasts • Capable of amplifier redundancy • 8 trigger inputs/outputs
5
-
-
Supply, installation, testing & commissioning of IP based Networkable touch screen paging station for selection of zones, supervision of system status, setting of scheduled broadcasts with the following functions:
• Built-in monitoring loudspeaker
• Detachable goose-neck microphone
• LCD touchscreen display
• Audio input
2
-
-
Supply, installation, testing & commissioning of Configurable Push to talk handset, Suitable for Desktop Flush Mount.
5
-
-
Supply, installation, testing & commissioning of integrated Audio source with the following features :
• Two single CD\USB\SD and DAB\FM line outputs can play music applications in two areas. • The volumes of the two line outputs can be adjusted separately.
• CD\USB\SD has three play modes: single play, all play and repeated play.
• DAB\FM can preset 10 channels of programs.
• RS485 remote control interface.
1
-
-
Supply, installation, testing & commissioning of 1X500W Class-D Amplifier with 2 independent channels and can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection.
12
-
-
Supply, installation, testing & commissioning of 6W Ceiling Speaker with max SPL1M/1W 96dB. Frequency response of 80Hz-20KHz with a dispersion angle of 160 deg. The speaker should have tappings at 6W / 3W / 1.5W.
287
-
-
Supply, installation, testing & commissioning of 6W Wall mount with max SPL1M/1W 96 dB. Frequency response of 160Hz-20KHz. The speaker shoud have tappings at 6W/3W.
44
-
-
Supply, installation, testing & commissioning of Network Resource Interface for external control access and audio extension. Suitable to the needs of central interfaces management required by middle-to-large applications.The device should provide 4 external audio source interfaces and 1 built-in audio source. These audio sources are network audio source which can be shared in the Ethernet.
1
-
-
Supply, installation, testing & commissioning of GUI Software for Medium to Small Project System Management Software Package (Include 1 sever and 1 client interface).
1
-
-
Supply, Installation, Testing & commissioning of 2CX1.5 Sq. mm armoured FRLS cable.
3000
-
-
Providing and fixing of G.I Trunking with 275 GSM metal ducting made up of 1.6 mm thick with a standard length of 2.5 mtrs. continuously Hot Dipped , Pre galvanised metal with zinc coated steel sheet double folded and arc welded with all acessories . the trunking is compartmentalised for provision of data , power and voice cables and has a depth of 38 mm complete as required. : Raceways as per BS:2989 (Indian standards IS 277:2003).
-
-
-
(a) 150 mm x38 mm 1.6 mm (3 compartment) (MK cat No. UMDX or superior quality)
200
-
-
(b) Jointing sleeves for connecting raceways
50
-
-
(c) Vertical access unit for 90 degree (L) bend
24
-
-
Supply, installation, testing and comissioning of following sizes cross over box, suitable for 38 mm depth tripple compartment metal ducting made out of high pressure die cast zinc alloy complete with all accessories such as top cover bare support frame, bore support studs etc. complete as required. trap cover is reinforced. Steel plate to withstand upto 3.6 tons of load on the trap. as per IEC 61084 standards.
-
-
-
(a) 250 mm x250 mmx50mm-65 mm (similar to MK Cat No JB 250 or superior quality)
8
-
-
Supply and fixing of floor access outlet manufactured from high pressure cast die cast material . The system is CAT 6 complaint . The trap frame is made of strong nylon material for added resistance. The system has the provision to accommodate three compartment trunking to run Mains Voltage & Extra Low voltage cables. The system also has positive Earthing connections in all the 3 compartments, the system has the provision to accomodate 25/38 mm deep trunking with a knockout of upto 225 mm.the floor box consist of inbuilt staggered accessory plates to relieve the strain relief, even when international moulded plug tops are used. self closing lid mechanism for safety in accordance with new standard IEC 61534 . the system has a unique on/off locking mechanism for height adjustment , making it more user friendly. load bearing capacity :5000N as per EN 50085-2-2 material coating:275 GSM.
-
-
-
(a) 265 mmx265 mmx53 mm-80 mm (3 compartment) (Similar to MK Cat No CUB265-3GRY or superior quality).
21
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements