Irrigation Department Tender
... More
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Irrigation Department Tender
Civil And Construction
Eprocure
Opening Date20 Feb 2025
Closing DateCancelled
Tender Amount₹ 2,75,51,000
Technical
Technical
Bid Capacity
... View More
To determine the bid capacity required, we look for specific details related to financial requirements or qualifications that bidders must meet. The information includes various clauses and conditions but does not directly state a formula for calculating bid capacity in all cases. However, aspects related to the bidder's financial capabilities and experience, such as turnover, are mentioned. Given the details, the bidders should have an average annual financial turnover in Civil works of not less than 30% of the estimated value of the work during the last 3 years. This implies a formula for the minimum average annual turnover required: Minimum Average Annual Turnover = 0.3 × Estimated Value of the Work. Another formula provided is: (2AN-B) > Estimated Value of the work, where A = Maximum Value of Civil Engineering works executed in any one year during the last Five years, N = Number of years prescribed for completion of the works, and B = Value of existing commitments. Since specific estimated values or costs are not provided in the query, exact figures cannot be calculated. However, the formulas indicate that the bidder's average annual turnover in civil works should be at least 30% of the project's estimated value over the last three years, and the assessed available bid capacity should be greater than the estimated value of the work as per the given formula. Therefore, the bid capacity required, in terms of formulas based on the provided information, includes:
1. Minimum Average Annual Turnover = 0.3 × Estimated Value of the Work
2. (2AN-B) > Estimated Value of the work These formulas suggest that the bid capacity is directly related to the estimated value of the work and the bidder's past performance and commitments.
Technical Capacity
... View More
The required prior work experience for the bidder includes having successfully completed similar nature of civil works during the last 7 years. The specific requirements are as follows:
- Three similar completed works costing not less than 40% of the estimated cost.
- Two similar completed works costing not less than 50% of the estimated cost.
- One similar completed work costing not less than 80% of the estimated cost.
The experience will be updated by giving 8% simple weightage per year to bring them to the current financial year price level. Additionally, the bidder must have completed similar works with a value of not less than the estimated value of the work in any one year during the last 5 financial years. The bidder should also have average annual financial turnover in Civil works of not less than 30% of the estimated value of work during the last 3 years.
Costs
EMD
₹ 55,10,000Document Cost
₹ 3,540Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPIDC_1008666_2Tender No
16/SE/2024-25Tender Authority
Irrigation Department ViewPurchaser Address
-Website
http://http://idup.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dismantling old damaged existing plaster including disposal of refuse within distance of 60 meters i/c. cost of labour and T&P etc.
2864.58
-
-
... More
Disposal of malba or scrap material i/c. of all lifts and leads upto 5.00 km. by power transport with cost of labour & T&P etc. required for proper completion of works.
641.57
-
-
... More
Cement concrete 1:3:6(1cement:2coarse sand:4stone grit size 20-40mm.) in foundation & base conc.including cost of all materials,labour and T&P etc. required for proper completion of work.
268.14
-
-
... More
Centering & shuttering of C.C. Work Including rent of shuttering material,labour and T&P etc. required for proper completion of work.
622.2
-
-
... More
Brick work in 1:4(1cement:4coarse sand) cement coarse sand mortar including cost of all materials,labour and T&P etc. required for proper completion of work.
558.89
-
-
... More
Centering & shuttering of R.C.C. Work Including rent of shuttering material,labour and T&P etc. required for proper completion of work.
2430.66
-
-
... More
Reinforcement steel (Sail/Jindal/Essar/Tata brand) it's straightening, cutting, bending, placing in position and binding with binding wire including cost of all materials,labour and T&P etc. required for proper completion of work.
35.04
-
-
... More
R.C.C. work in (M20) 1:1.5:3 (1cement:1.5coarse sand:stone grit 12-20mm. size) including cost of all materials,labour and T&P etc. but excluding cost of steel reinforcement .
304.89
-
-
... More
Cement Concrete in (M15) 1:2:4 (1cement:1.5coarse sand:stone grit 12-20mm. size) including cost of all materials,labour and T&P etc. but excluding cost of steel reinforcement .
21
-
-
... More
20 mm. thick Cement plastering in 1:2(1cement:4coarse sand) cement mortar including cost of all materials ,labour and T&P etc. required for proper completion of work.
827.28
-
-
... More
12.5 mm. thick Cement plastering in 1:4(1cement:4coarse sand) cement mortar including cost of all materials ,labour and T&P etc. required for proper completion of work.
7297.13
-
-
... More
Sal wood work in chaukhat frame with M.S. hold fast i/c. cost of all materials,labour and T&P etc. required for proper completion of work.
9.61
-
-
... More
Providing & fixing 32mm. Thick commercial flush door shutters conforming of I.S. 2202 Part-1(1983)i/c. fixing and adjustment of hinges,bolts,locks,handles and springs (excluding cost of fittings) including cost of all materials,labour and T&P etc. required for proper completion of work.
270.9
-
-
... More
Supply and fixing of 4.5 cm. thick C.P. teak wood glazed shutter in window including all necessary fittings including cost of all materials,labour and T&P etc. required for proper completion of work.
135.9
-
-
... More
Supply & fixing fly & mosquitos proof stainless steel grade 304 wire mesh gauge with 0.5mm dia. And 1.4mm wire aperature shutters in door,window and ventilator including necessary screws all materials,labour and T&P etc. required for proper completion of work.
207.9
-
-
... More
Providing wall putty on new surface with approved quality material of berger/J.K./Birla or similar make two coat over plastered surface to prepare the surface even and smooth including cost of all materials,labour and T&P etc. required for proper completion of work.
7297.13
-
-
... More
Providing & laying vitrified floor tiles size 600X600mm with water absorption less than 0.8% and conforming to to IS:15622,of approved make in all colour and shades,laid on 20mm. Thick cement mortor 1:4 (1cement : 4 coarse sand) jointing with grey cement slurry@3.3 kg/sqm i/c. grouting the joints with cement and matching pigment etc. including cost of all materials,labour and T&P etc. required for proper completion of work.
653.89
-
-
... More
Supply & fixing 6 mm. (1/4") china glazed tiles in flooring or skirting/dado laid with 1:3 cement and coarse sand mortar and polishing including cost of all materials,labour and T&P etc. required for proper completion of work.
85.05
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. including cost of all materials,labour and T&P etc. required for proper completion of work.
25.2
-
-
... More
Finishing walls with Acrylic smooth exterior paint two coat of approved make of required shade on old surface by engineer-in-charge to give even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered material including cost of all materials,labour and T&P etc. required for proper completion of work.
3620.27
-
-
... More
Distempering two coats with oil bound distemper i/c. cost of all materials,labour and T&P etc. complete.
3676.86
-
-
... More
Painting two coat over primming coat on steel and other metal surface including cleaning the surface of all dirt,dust and other foreign matter,sand papering and stopping including cost of all materials,labour and T&P etc. required for proper completion of work.
1128.17
-
-
... More
Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)-Medium Point including cost of all materials,labour and T&P etc. required for proper completion of work.
460
-
-
... More
Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)- Medium Point including cost of all materials,labour and T&P etc. required for proper completion of work.
100
-
-
... More
Supplying & fixing DP sheet steel enclosure on surface/recess along with 25/32 A 240 V "C" Curve DP MCB complete with connections, testing and commissioning etcincluding cost of all materials,labour and T&P etc. required for proper completion of work. .
20
-
-
... More
Providing & fixing white vitereous china pedestal type water closet ueropean W.C. Pan with seat and lid, 10 letre low level white PVC flushing cistern including flush pipe with manualy controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures including cutting and making good the wall and floors wherever required . W. C. pan with IS marked white solide plastic seat and lid.including cost of all materials,labour and T&P etc. required for proper completion of work.
20
-
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.including cost of all materials,labour and T&P etc. required for proper completion of work.
20
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap including cost of all materials,labour and T&P etc. required for proper completion of work.
20
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board size 510x1040 mm bowl depth 250 mm including cost of all materials,labour and T&P etc. required for proper completion of work.
20
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia including cost of all materials,labour and T&P etc. required for proper completion of work.
40
-
-
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap. including cost of all materials,labour and T&P etc. required for proper completion of work.
60
-
-
... More
Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 including cost of all materials,labour and T&P etc. required for proper completion of work.
400
-
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.including cost of all materials,labour and T&P etc. required for proper completion of work.
20
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions including cost of all materials,labour and T&P etc. required for proper completion of work.
60
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including cost of all materials,labour and T&P etc. required for proper completion of work.
10000
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. including cost of all materials,labour and T&P etc. required for proper completion of work.
40
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : including cost of all materials,labour and T&P etc. required for proper completion of work.
40
-
-
... More
Providing and fixing C.P. brass angle valve for Wash basin mixer and geyser points of approved quality conforming to IS:8931 including cost of all materials,labour and T&P etc. required for proper completion of work.
60
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore including cost of all materials,labour and T&P etc. required for proper completion of work.
20
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 15 mm nominal dia Pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. including cost of all materials,labour and T&P etc. required for proper completion of work.
400
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20 mm nominal dia pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall including cost of all materials,labour and T&P etc. required for proper completion of work.
200
-
-
... More
Providing & fixing M.S. or iron work of small and section such as M.S. grills & railling etc.including rivetting or welding where necessary with cost of all materials,labour and T&P etc. required for proper completion of work.
6452
-
-
... More
Providing beldar for nali cleaning,jungle/jhaari clarance and safaai works including cost of labour and T&P etc. required for proper completion of work.
150
-
-
... More
Providing & laying 80 mm. thick factory made C.C. Interlocking tiles/paver including 50mm. Thick compacted bed of fine sand proper embedding/laying of interlocking tiles leveling and dressing of surface to required level and slope,filling joints with fine sand and below it laying 0.10m. thick base concrete in 1:3:6 with cost of all materials,labour and T&P etc required for proper completion of work.
624.6
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 80mm. Dia. Nominal bore , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. including cost of all materials,labour and T&P etc. required for proper completion of work.
1445
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 50mm. Dia. Nominal bore , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. including cost of all materials,labour and T&P etc. required for proper completion of work.
792
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 32mm. Dia. Nominal bore , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.including cost of all materials,labour and T&P etc. required for proper completion of work.
1860
-
-
... More
Providing and fixing Gun Metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm. Dia. Nominal bore including cost of all materials,labour and T&P etc. required for proper completion of Work.
125
-
-
... More
Providing and fixing Gun Metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm. Dia. Nominal bore including cost of all materials,labour and T&P etc. required for proper completion of Work.
125
-
-
... More
Constructing masonary chamber 60x60x75 cm. inside in brick work in cement mortar 1:4 (1cement : 4 coarse sand )for the hydrants with C.I. surface box 350x350 mm. top and 165 mm. deep (inside) with chained lid and RCC top slab 1:2:4 mix i/c. necessary excavation,foundation concrete 1:5:10 and inside plastering with cement mortar 1:3 12 mm. thick, finished with a floating coat of neat cement complete i/c. cost of all materials,labour,T&P etc. required for proper completion of work.
76
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements