Irrigation And Flood Control Department Tender

Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size).

Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make Health Walker: The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably. The Foot rest and Base plate covers are manufactured from Virgin LLDPE. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H)1064×520×1250mm . Capacity 1 persons. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make SIT UP: The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. The Seat and Base plate cover are manufactured from Virgin LLDPE. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1480×1200×630mm . Capacity 2 persons. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make SELF WEIGHTED ROWER: The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. The Seat, backrest and Base plate cover are manufactured from Virgin LLDPE. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1260×800×920mm. Capacity 2 persons. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make Rider: The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. The Seat and Base plate cover is manufactured from Virgin LLDPE. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1263×558×1267mm . Capacity 1 persons. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make Pulldown Challenger: The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. The Seat, backrest and Base plate cover are manufactured from Virgin LLDPE. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 2310×700×1880mm . Capacity 2 persons. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make Squat Pusher: The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. The Seat, backrest and Base plate cover are manufactured from Virgin LLDPE. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1800×698×1884mm. Capacity 2 persons. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make Arm and pedal bike. The products must tested and certified to meet EN16630 safety standards with GS test mark. All Tubular steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using AKZO Nobel - Great Wall Powder to the thickness of 80 – 120 microns. All metal parts are tested in a 5% NaCL solution in accordance to ISO7227 to speed up corrosion for 3000 hrs. The seat is made from Rotomoulded LLDPE. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 830 MM x 500 MM x 1450 MM . Capacity 1 person. A cycling and upper arm exercise rolled into one. Co-ordination between leg and arm movement encourages balance whilst exercising too. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines..

Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make TAI CHI spinners: The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H)1245×1070×1500mm . Capacity 2 persons. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make Seated Chest Press: The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. The Seat, backrest and Base plate cover are manufactured from Virgin LLDPE. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1800×698×1880mm. Capacity 2 persons. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make BIG SHOULDER WHEEL: The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H)870×767×1940mm . Capacity 2 persons. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make Elliptical Cross Trainer: The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal limiter is fitted inside to prevent the equipment from moving uncontrollably. The Foot restand Base plate covers are manufactured from Virgin LLDPE. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1100x550×1510mm . Capacity 1 persons. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make WAIST TWISTER: The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. The Base plate cover is manufactured from Virgin LLDPE. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) Ø1400×1350mm.Capacity 3 persons. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Providing and fixing 36mm thick EPDM (Ethylene Propylene Deine Monomer) Rubber flooring on existing surface in required color and shape. The EPDM Rubber flooring should be laid at site in dual color and pattern as per the direction of the Engineer-in-charge. All complete as per manufacturer specification.