Irrigation And Flood Control Department Tender

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate.

Providing and fixing of AERIAL STROLLER/ HD HEALTH WALKER make ARIHANT/KOMPAN/LANDSCAPE /GRAND SLAM/KOOCHIE(HUGO) or equivalent as approved by engineer-in- charge. HD Health walker of size 1070x615x1509mm fabricated withmain post of 114m and 4mm thick pipes made of hot rolled tubular steel and hot dipped galvanized and powder coated using akzoNobel or equivalent of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removingsharp edges and burrs.Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made from virgin LLDPE manufactured by rotationalmoulding with minimum thickness of plastic of 8mm,colorful and UV resistant and environmental friendly, bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with in welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint are applied at all welded points prior to finishing. All complete as per technical specifications of manufacturer. The installation requires the poles to be fitted using Anchor fasteners on a concrete foundation.

Providing and fixing of ABS Board/HD Sit up station make ARIHANT/KOMPAN/LANDSCAPE /GRAND SLAM/KOOCHIE(HUGO) or equivalent as approved by engineer- in charge: HD sit up station of size 1400x1356x650 mm fabricated with main post of 114mm and 4mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removingsharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Sit up boards and base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm, colorful and UV resistant and environmental friendly. All open ends of pipe to be closed by LLDPE caps for user friendly. The equipment to be fixed on ground with concrete us set, fix the equipment on to it and cover nuts and bolts with technical specification.

Providing and fixing of Aero Rider/HD Horse Rider Station make ARIHANT/KOMPAN/LANDSCAPE /GRAND SLAM/KOOCHIE(HUGO) or equivalent as per approved by Engineer- in Charge: HD Horse Rider Station of size 1417x668x1425mm fabricated with main post of 114mm and 4mm thick made hot rolled tubular steel and hot dipped galvanized and powder coated using akzo Nobel or equivalent of 80-120mm micron thick. All Joints of pipe are robotic welded with joints scalloped as necessary and dressed off removingsharp edges and burrs. zinc primer paint are applied at all welding points prior to finishing. pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury. Seat and base plate cover to be made from virgin LLDPE manufacturered by rotational moulding with minimum thickness of plastic of 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer -in charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLDPE caps for user friendly.The equipment to be fixed on ground with concrete of minimum strength M-25 and j Shaped weldedbolt and ones the concrete is set, fix the equipment on it and cover nuts and bolts with the base plate cover.

Providing and fixing of SHOULDER EXECISER/PULL DOWN CHALLANGER make ARIHANT/KOMPAN/LANDSCAPE /GRAND SLAM/KOOCHIE(HUGO) or equivalent as approved by engineer- in charge:pull down challenger of size 2572x805x2187 mm fabricated with main post of 114mm and 4mm made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removingsharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. seat and base plate cover to be made from virgin LLDPE manufactured rotational moudlling with minimum thickness of plastic of 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, dully oil sealed and self lubricated made by reputed company to be approved by Engineer- in Charge. Equipment to fitted with inbuilt limiter to prevent unwanted movement . All open ends of pipe to be closed by LLDPE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J Shaped welded bolt and ones the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of LEG EXTENTION/LEG STRETCH make ARIHANT/KOMPAN/LANDSCAPE /GRAND SLAM/KOOCHIE(HUGO) or equivalent as approved by engineer- in charge LEG STRETCH of size 932X811X1163 mm fabricated with main post of 114mm and 4mm thick and rails made from 32 mm dia pipes and thickness of 2.4mm pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120mm micron thick. All Joints of pipe are robotic welded with joints scalloped as necessary and dressed off removingsharp edges and burrs. zinc primer paint are applied at all welding points prior to finishing. Seat anfd base plate cover to be made from virgin LLDPE manufacturered by rotational moulding with minimum thickness of plastic of 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer -in charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLDPE caps for user friendly. the equipment to be fixed on ground with concrete of minimum strength M-25 and j Shaped welded bolt and ones the concrete is set, fix the equipment on it and cover nuts and bolts with the base plate cover.

Providing and fixing of FOREARM TWRIL/TAI CHI SPINNERS make ARIHANT/KOMPAN/LANDSCAPE /GRAND SLAM/KOOCHIE(HUGO) or equivalent as approved by engineer- in chargeFOREARM TWRIL/TAI CHI SPINNERS: TAI CHI SPINNERS of size 1150x1150x1650mm fabricated with main post of 114mm and 4 mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 mm micron thick.The circular spinners made from 32mmdia hot dipped galvanized steel rods and welded on to the post using a 6mm dia necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing.Pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer- in Charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. The equipment to fixed on ground with concrete of minimum strength M-25 And J- Shaped welded bolt and ones the concrete is set,fix the equipment on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of CHEST PRESS/SEATED CHEST PRESS Make ARIHANT/KOMPAN/LANDSCAPE /GRAND SLAM/KOOCHIE(Hugo) or equivalent as approved by Engineer-in charge: SEATED CHEST PRESS of size 1957x733x2058mm fabricated with main post of 114mm and 4mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges burrs.Zinc primer paint are applied at all welding points prior to finishing.Seats and base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm,colorful and UV resistant and environmentalfriendly, handgrip to be made from high quality rubber. Bearing used shall be made maintenance free,duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in Charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement.All open ends of pipe to be closed by LLDPE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of SHOULDER TWRIL/BIG SHOULDER WHEEL make ARIHANT/KOMPAN/LANDSCAPE /GRAND SLAM/KOOCHIE(Hugo) or equivalent as approved by Engineer-in charge: BIG SHOULDER WHEEL of size 857x850x1815mm fabricated with main post of 114mm made of hot rolled tubular steel and hot dipped galvanized and powder coated using AkzoNobel or equivalent of 80-120mm micron thick.All joints of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges burrs.Zinc primer paint are applied at all welding points prior to finishing.Seats and base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm,colorful and UV resistant and environmentalfriendly, handgrip to be made from high quality rubber. Bearing used shall be made maintenance free,duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in Charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement.All open ends of pipe to be closed by LLDPE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of OVALTE STEPPER/HD ELLIPTICAL CROSS TRAINERS make ARIHANT/KOMPAN/LANDSCAPE /GRAND SLAM/KOOCHIE(Hugo) or equivalent as approved by Engineer-in charge HD ELLIPTICAL CROSS TRAINER OF SIZE 1148X585X1486MM fabricated with main post of 114mm and 4mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120mm micron thick. All Joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be made maintenance free,duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement , All open ends of pipe to be closed by LLDPE caps for user friendly. the Equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete is set,fix the equipment on it and cover nuts and bolts with the base plate cover.

Providing and fixing of HIP TWISTER/HD WAIST TWISTER make ARIHANT/KOMPAN/LANDSCAPE /GRAND SLAM/KOOCHIE(Hugo) or equivalent as approved by Engineer-in charge HD WAIST TWISTER OF SIZE 1463x1310x1258mm fabricated with main post of 114mm and 4mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120mm micron thick. All Joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Rotating base and base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm,colorful and UV resistant and environmental friendly. Bearing used shall to be made maintenancefree, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLDPE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equipment on it and cover nuts and bolts with the base plate cover.

Providing and fixing rubber tile flooring 25mm thick made of SBR (Styrene Butadiene Rubber) with interlocking arrangement and adhesive all complete and size as approved by the Engineer-in-charge.