Irrigation And Flood Control Department Tender

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth inCement mortar 1:4 (1 cement : 4 coarse sand)

Providing & Fixing Red Sand Stone Slab 30 mm thick (undressed) in cement mortar 1:6 (1 Cement : 6 Fine Sand) over drains

Centering and shuttering including strutting, propping etc. and removalof form for all heights: Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

Providing and fixing factory made 100 mm thick perforated precast RCC drain covers, having concrete of strength not less than M-25, of size as per site requirement , reinforced with 8 mm dia bar @ 100 mm centre to centre in both directions,T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 100 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more

Supply & Carriage of C&D waste screened soil up to site of work by mechanical transport including cost of Screen soil at ILFS and loading, unloading and banking the same in layers not exceeding 20cm in depth , breaking clods, watering, rolling each layer with 1/2 tonne roller or steel rammers and rolling every 3rd layer with power rollet of minimum 8 tonne capacity and dressing up in embankments, roads, flood marginal banks and guide banks or filling up in ground depressions all complete as per site conditions.

Providing and laying cement concrete pavement of M-10 with ready mixed concrete from batching plant of reputed cement manufacture and transported to the site of work in transit mixer having continuous agitated mixer, manufactured as per mixed design of M-10 grade of cement concrete work including pumping of R.M.C from transit mixer to site. Placing in required camber compulsory with plate / screed vibrator, with wire brush etc. and curing including cost admixture in recommended proportions as per I.S. 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per specifications and direction of Engineer-in-charge Note : 1) Less cement used than specified in this item is recoverable separately. M-10 grade plain cement concrete by using 220Kg of cement per cum of concrete.

Providing and laying 100 mm thick C& D waste product cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of C & D waste manufactured sand, filling the joints with C & D waste manufactured sand etc. all complete as per the direction of Engineer-in-charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20