Irrigation And Flood Control Department Tender

Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railingwith necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick almuninum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc as per IRC: 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure senstive adhesive bakcing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts@300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint of grey colour on the back side of aluminium sheet including appropriate priming coat. The rate include the cost of rounding off the corners, lowering down tjhe structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage.

Providing and fixing 36mm thick EPDM (Ethylene Propylene Deine Monomer) Rubber flooring on existing surface in required color and shape. The EPDM Rubber flooring should be laid at site in dual color and pattern as per the direction of the Engineer-in-charge. All complete fixing of equipment in foundation is to be done as per manufacturer specification.Engineer In-Charge

Supply of multipurpose M.S pole for Tennis duly painted in a pair (two in one type) made out 50mm. dia heavy duty pipe along with base socket in a pair heavy duty type of size 450 X 450x3.0mm including all necessary fixtures fittings.easy moving on 2 Double PU Wheels which are non marking braned wheels to help protect floors

Supply of cotton base Tennis net of size 0.75 X 6.10mtr in required color and standard shape with all necessary fixtures.

Supplying and providing chain link fencing 2.60 M height : Fabrication supply and fixing 50mm Dia B Class GI pipe at an interval of 2.00m c/c in foundation of 45x45x45 cm in cement concrete 1:4:8 using 40mm broken stone stone fabrication supply and fixing frame of over all size 2.00m x 2.60m made out of M.S. Angles 30x30x5mm, with one vertical support at middle (20 x 6 mm ms Flat ), fixing GI chain liink fabric fencing of 2.00M width and 2.60m Height in mesh size 50x50mm made of GI wire of 4mm, PVC coated to achive outer dia not less than 5mm in required colour and shade drilling holes on the angle and M.S. Flat @ 30Cm intervals fixing chain link to the frame using bolts, nut, washers at all sides including fixing of frame into GI posts, cost inclusive of all material, cutting angles and flats to required lenght, welding, drilling necessary holes on the angle iron and flat , labour and all other charges fabrication and fixing, applying coats os synthetic enamel paint of approval quality and colour after applying a coat of zich rich primer etc. complete ae per direction of engineer in charge and drawing,( earth work and concrete will be measured saparetely