Irrigation And Flood Control Department Tender

Half brick masonary with common burnt F.P.S (non modular) bricks of class designation 7.5 in foundations and plinth in: cement mortar 1:4 ( 1 cement: 4 coarse sand)

12 mm cement plaster :1:4 (1 cement : 4 coarse sand)with a floating coat of Neat cement punning.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Providing and laying in position ready mixed plain cement concrete with cement content as per approved design mix ;and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing including cost of curing admixtures in recommended proportions as per IS: 9103 accelerate/retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge Note: 1 Excess/less used than specified in this item is payable recoverable separately. All works up to plinth level M-10 grade plain cement concrete (cement content consider @ 220 kg./cum).

Providing and laying (RMC) of M-30 grade by using minimum 400 kg of cement (43 grade, OPC) per cum of concrete in roads/streets manufactured in automatic RMC plant using coarse sand and graded stone aggregate of 20 mm nominal size in appropriate proportion as per approved design criteria including transportation to site in transit mixer, including cost of admixture in recommended proportion as per IS 9103 to accelerate/ retard setting of concrete to improve workability with out impairing strength and durability as per specification including spreading and compacting mechanically by using needle and surface vibratos, leveling to required slope & camber, finishing by floating &brooming with wire brushes etc. and curing including making provision for contraction.expansion, construction of cross/longitudinal joints of size 10 mm wide 50 mm deep by groove cutting machine, providing and filling joints with approved joint filler and sealants, etc. complete, as per direction of Engineer-in-charge.(Cost of joint filler & sealants shall be paid for separately under relevant items). Note:- Cement content considered in M-30 is @ 400 kg/cum less cement used as per design mix is recoverable @ Rs. 10/- P. kg. separately M-30 RMC by using minimum cement @ 400 kg/cum. cement concrete manufactured in automatic batching plant (RMC Plant) including transportation to site in transit mixer.

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering,shuttering,reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat Cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Disposal of building rubbish/malba /similar unservicable, dismantled waste material by mechanical means, including loading, transporting ,unloading to within to the TajpurPhari for all leads including all lifts involved.