Irrigation And Flood Control Department Tender

Supply of earth inclduding royality, and carriage of earth by mechanical transport excavated earth, breaking clods, watering, in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depression with all lead & lifts.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Randon rubble masonry with hard stone in superstructure above plinth level upto floor II level including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone agg. 20 mm nominal size) at with cement mortar 1:6(1 cement : 6 coarse sand). Window sills ceiling level and the like.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor III level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form work for small lintels not exceeding 1.50 m clear span, moulding as in cornices, window sills, string courses, bands, coping, bed plates anchor blocks and like.

Providing and laying cement concrete in retaining walls, return walls, walls(any thickness) including attached pilasters, columns piers, abutments, pilIers, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks plain window sills fillets etc. upto floor II level, excluding the cost of centering, shuttering and finishing 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Pointing on stone work with cement mortar 1:3(1 cement : 3 fine sand): raised and cut pointing.

Centering and shuttering including strutting, propping etc. and removal of form work for : .3.1 Foundations, footings, bases for columns

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :4.1.2 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor II level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.Granite of any colour and shade

Supplying & stacking rubbish/malba by mechianical transport including filling up ground despression & consolidation and watering the same upto a lead 5 K.M. and lift upto 1.5 M.

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : 2.14.1 Holes 1.2 m dia and 1.2 m deep

Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.

Supply and stacking of Jacaranda mimosifolia plant of height 4-5 m. as per direction of the officer-in-charge.

Grassing with english lawn grass including Surface dressing of the ground and good earth and manure, sowing watering and maintenance of the lawn for 30 days or more till the grass forms a thickm lawn, free from weeds and fit for mowing including supplying good earth, if needed including the grass seeds,Manure and pesticides etc complete, In rows 5 cm apart in both directions as per direction and satisfaction of Engineer in charge( good earth shall be paid for separately)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Supplying, installation, Testing and commissioning of continuously tapered multifaceted and polygonal cross section 16mtr high mast system hot dip(galvanized) with wind velocity as per IS 875 part-3 as per detailed specification attached with following Make Bajaj, Philips, G.E., Volmont. a) 2 sections having suitable sectional length with slip joints between various sections without any circumpherial welding. b) Double drum winch with separate handle for manual operation of winch with a torgue limiting device for safe checking of carriage. c) Raising/lowering type lantern carriage designed to carry 9 Nos. luminaries control gear box, junction box and top pulley assembly with weather proof cover. d) Necessary suitable length for lowering and raising of lantern carriage of stainless steel wire ropes of 7/19 construction and with suitable size of multi core flexible copper power cable.e) Hinged service door in base section base plate earthing terminal. f) Lightening conductor final made of 25mm dia 300mm long G.I. tube having single prong. g) Integral single power tool (electrical) for lowering & raising of high mast.

Providing and laying the RCC foundation suitable for erection of 16mtr high mast as per manufacturers recommendation including excavation, casting of foundation anchor plate, templates and foundation bolt manufacturer from special steel along with nuts, washers etc. R.C.C. work 1:1.5:3 (1 cement” 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) with material, labour and reinforcement with size of footing 2.10x2.10x0.20m laid over 1:4:8(1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) and foundation pedestal of size 0.90x0.90x2.00m or as per approved drawing complete as required.

Supplying and laying double walled corrugated (DWC) High Density Poly ethylene (HDPE) pipe of 50/38 size having corrugation on the outer wall and plain surface on inner wall confirming to IS 14930 (Part II) below the ground level excluding excavation refilling the trench etc. as per specification etc. as required

Providing and fixing of 200 watt LED flood light (IP66) with aluminium housing and heavy heat sink, including toughned glass (Surya).

Supplying, installation, testing and commissioning of feeder pillar of suitable size made from 2mm thick CRCA sheet dust and varmin proof duly phosphatized and painted inclusive of suitable size 4 strip Bus bar complete with inter connection, inter earthing and providing and fixing below noted accessories.(M/R) Timer 24 hours = 1 No. TPN MCCB – 63 Amp = 1 No. MCB- 6 to 32 Amp = 10 Nos. Power contactor = 1 No. Indicator light = 3 Nos.

Supplying of PVC insulated and PVC sheathed (General purpose) XLPE/armored multi core cable with standard aluminum conductor suitable for working voltage upto and including 1100 volts confirming to IS 7098/Part/1988 with amendment slips upto date. Size 4x25sqmm. (M/R)

Laying and fixing of one number PVC insulated & PVC sheathed /XLPE power cable of 1.1 KV grade of size not exceeding 35sq. mm clamped with 1mm thick saddle on wall surface, as required.

Laying and fixing of one number PVC insulated & PVC sheathed /XLPE power cable of 1.1 KV grade of size direct in ground including excavation and refilling the trench etc. as required but excluding sand cushioning and protective covering upto 35mm.(7.3.1)

Supplying and laying 6 SWG G.I. wire at 0.50metre below ground level for conductor earth electrode including connection, termination with G.I. thimble etc. as required. 5.7

Providing and fixing of ANIMAL MGR make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE. The main frame of the animal merry go round is made up of 25 NB & 40 NB GI pipes. The GI pipes are powder coated. The stand is made in 80 NB GI pipes. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. The animal seats are made out of molded plastic in rotational molding process (LLDPE). It accommodates four children at a time. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Providing and fixing of MULTI SEATER SEE SAW make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE. The Multi Seater See saw comprises four Rotational seats. The lever consists of 20 NB and 80 NB powder coated GI pipes. The bearing used in this product is heavy duty nylon bush type. The stand for see saw is made using 50 NB GI pipe. All complete as per the direction ofengineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Providing and fixing of TODDLER SWING make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE. In the toddler swing the center support is made up of 100 NB GI pipes. The horizontal bars are made up of 50 NB powder coated GI pipes. The bucket seats of the toddler swing are made of rubber with anti-skid. The ball bearings are mounted inside specially designed nylon balls. The rubber seat is affixed on 6 mm thick GI chain. The seats are made with full care so that the child does not fall from it while swinging. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Providing and fixing of ROTO WAVE SLIDE 1.5 MTR. make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE. The Platform support pipe: It is 80NB hot dip galvanized center support pipe of length 1980mm conforming to IS 1239 with GI thickness of 60µ. The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 20 NB pipes respectively. •Landing support: It is made from 25NB anti corrosive Galvanized Pipe of length 1500mm with GI coated Base Plates together with standard ISA Foundation Angles to provide strong support •Ladder Step: It is Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176-1:1998 conforming to EN1176-1:1998 The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. •Pipe Materials or Class: Medium Duty ('B' Class) & Light Duty ('A' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Platform: It is 16 SWG GI Plated Platform of size - 500x450x60mm. . All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Providing & fixing of S-BRIDGE LADDER SCRAMBLER make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE, The ‘S’ bridge ladder is fabricated from 25 NB and 20 NB GI pipes. The vertical supports are made from 40 NB GI pipes with a total height of 2.1 mtrs from the ground. It has two ladders made from 40 NB GI pipes each on the vertical support pipes itself. The steps of the ladder are made from 20 NB GI pipes. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Providing and fixing of SPIRAL SLIDE 2.1 MTR make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE. The spiral slide is made up of fiber reinforced plastic in one piece having shell thickness of 3‐4 mm. The slide is supported on a center support of 80 NB GI pipe. The landing supports of the slide are supported by two 20 NB pipes. The slide ladder is made up of 25 NB GI pipe. The spiral slide railing is made up of 15 NB and 20 NB pipes respectively. The triangular steps of the ladder are made up of 16 SWG GI sheets. The safety railing of the ladder is made up of LLDPE in Roto molding process. The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Providing & fixing of FOUR SEATER MGR of make ARIHANT/KOMPAN/ LANDSCAPE STRUCTURE with the covering area MGR of 2.1mtr. the main frame of the four seater merry go round is made up of powder coated 20mm dia nominal bore Galvanized iron (Class-A) pipes. The center stand is made in 80 mm dia nominal bore Galvanized iron (Class-A) pipes. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. The seats are made out of roto molded plastic Linear Low Density Polyethylene (LLDP) in rotational molding process. It accommodates 4 children at a time. All installation complete as per the given technical specifications to manufacture the item. The Complete item to fixed in C:C (1:2:4) block after deep excavation/earth work at site as required

Providing and fixing of TURBO TOWER make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE. In this interesting turbo tower the center support is made up of 80 NB powder coated GI pipe. The loops given to the turbo tower are made up of 15 GI powder coated GI pipe. The rings of the turbo tower are made up of 20 NB powder coated GI pipes. The bend pipes are made in 25 NB GI pipes. There is a sufficient distance between the rings for the children climbing on it. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Providing and fixing of DOUBLE ARCH SWING make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE. The arch shaped side frame of the double arch swing is made up of 80 NB GI pipe and top pipe is made up of 50 NB GI pipe. The frame is powder coated to give an esthetic look. The two swings are made up of 10 mm thick anti-skid chequered reinforced rubber top. The belt seat is suspended on 6 mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Multifunction Play System AE 103 Area-12 mt.x 6 mt. Safety Area-14 mt.x 8 mt. Capacity-20-25 Children Standing Pipes-75 mm. Fibre -Slides Spiral,C-tube & Straight Slide.Deck-5 ft. x 3 ft. Canopy Fibre.

Providing and fixing Victorians type of Garden bench both side of arm of Garden bench made of flora cast iron and having of back height of minimum 700 mm seating height of 375 mm (approx) and both side of garden bench is connected with M.S tube of 65 x 25 mm sheet angular tube having 15-20mm in 12 Nos. for seating purpose with extra support 25 x 5 mm . M.S flat for stability all sharp and rough edges of benches are to be grinded with grinder and all fillup with MS seal where is it required necessary. This bench having the provision of hold fast system of for growing bench complete with a cutting of 1st class quality paint. finally bench is assembled with nuts and bolts including all tax. The length of bench be 1500mm and minimum overall weight is not less than 90KGS.

Providing and fixing precast reinforced cement concrete bench of over all size 1500 mm x 450 mm x 1000 mm, the bench consist of 02 nos. L-shape base sport in cement, thickness 100 mm back height 1000 mm front height 450 mm base width 620 mm as per sketch and 05 nos. reinforced concrete planks in red colour of sized 1500 mm x 100 mm x 50 mm and 01 nos. RCC planks of size 1500 mm x 200 mm x 50 mm by using M-30 grade of concrete using vibro compaction process, bench top and back planks are treated with special anti-corrosive water proof coating so as to make surface glossy and water proof including transportation, erection all part are jointed to gather with galvanized nuts and bolts of suitable size. All bolts are sealed after assembly.

Providing and fixing 3 Seater Stainless Steel benches with backrest made out of SS 304 Grade materials, overall dimension 1450x890x450 mm, sheet thickness will be 1.5mm and pipe thickness will be 2.0mm and dia. 38 mm. Turret punching or Laser cutting will be used for perforation.(weight approx. 40 Kg)