Irrigation And Flood Control Department Tender

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)

12mm cement plaster of mix 1:4(1 cement: 4 fine sand).

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

Providing and fixing rubber tile flooring 25mm thick made of SBR(Styrene Butadiene Rubber) with interlocking arrangement and adhesive all complete and size as approved by the Engineer-in-Charge.

Providing and fixing of CHEST PRESS SINGLE make ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM SEATED CHEST PRESS of size 1500x550x1825mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Seat and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Handgrip to be made from high quality rubber. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- 60x60x60cm after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc.

Providing and fixing of FOREARM TWIRL (Small Two wheels) make ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM FOREARM TWIRL/TAI CHI SPINNERS TAI CHI SPINNERS of size 1150x1150x1650mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. The circular spinners made from 32mm dia hot dipped galvanized steel rods and welded on to the post using a 6mm dia hot dipped galvanized steel supports. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury. Bearing used shall be made maintenance free duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. on ground with concrete of minimum strength M-25 and J shaped The equipment to be fixed on ground with concrete of strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- 60x60x60cm after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc.

Providing and fixing of SHOULDER TWIRL SINGLE make ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM BIG SHOULDER WHEEL of size 857x850x1815mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- 60x60x60cm after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc.

Providing and fixing of ABS BOARD (Single) make ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM ABS Board of size 1400x1366x650mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-100 micron thick. All joints of pipe are4 robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Sit up boards and Base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm, colourful and UV resistant and environmental friendly. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of strength M-25 and J shaped welded bolt and ones the concrete us set, fix the equipment on to it and cover nuts and bolts with technical specifications. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- 60x60x60cm after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineerin- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc.

Providing and Installation of PULL UP STATION of make ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM. Providing, designing and fixing of pull up station, The total frame is made with main post of 114mm dia And 4 mm thick G.I. Pipe as per IS-1239with help of connecting links. It is a combination of two exercises. Pull up section has handle made up of 25 NB G.I. pipes. PVC handgrips are provided at both ends of handle. Back section has hand rest of rectangular pipes. Small 25 NB G.I. pipes are provided for back rest. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps if required for user safety against entrapment. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- 60x60x60cm after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc.

Providing and fixing of OVATE STEPPER make ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM Ovate stepper of size 1148x585x1486mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- 60x60x60cm after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc.

Providing and Installation of SURF BOARD Double of make ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM. Surf board in pair of size 1150 x 900 x 1250mm fabricated with main post of 114mm dia and 4 mm thick G.I. Pipe as per IS-1239 and rest of the pipe 40mm dia and 4 mm thick G.I. Pipe as per IS-1239 and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm colorful and UV resistant and environmental friendly or FRP Material of same specification, Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE/ FRP caps for user safety. The equipment to be fixed on Ground with concrete after deep excavation work of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- 60x60x60cm after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer in- charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc

Providing and Installation of LEG LIFT POST of make ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM. Surf board in pair of size 1050 x 800 x 1150mm fabricated with main post of 114mm dia and 4 mm thick G.I. Pipe as per IS-1239 and 6 no of spacer pipes made by 25 NB G.I. pipes are arranged parallel at equidistance to form a back rest of product. The paired handle pipe consists of 25NB galvanized pipe fixed at the top and bottom of 80NB support pipe main frame. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- 60x60x60cm after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipments etc.

Providing & Installation of SKY WALKER of make ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM. Providing, designing and fixing double cross walker of size 1600 x 600 x 1600 mm fabricated with main post of 114mm dia and 4 mm thick G.I. Pipe as per IS-1239 and rest of the pipe 40mm dia and 4 mm G.I. Pipe as per IS-1239 and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm colorful and UV resistant and environmental friendly or FRP Material of same specification, Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE/ FRP caps for user safety. The equipment to be fixed on Ground with concrete after deep excavation work of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- 60x60x60cm after deep excavation/earth work at site as required. All complete as per direction and Pre approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipments etc.