Irrigation And Flood Control Department Tender

Providing and fixing Hip Twister double/ Waist Twister (PGOFT-31V1B) of make Kompan/ Leo/ Koochie/ Hugo/ Arihant Item Descriptions • Product Area : 6.2 ft x 2 ft. Technical Specification: • Main Support: The main support of Hip twister consist of 100NB G.I Pipe. •Handle/Wheel: 25NB Galvanized pipe bend to form ring of wheel and spokes are made up of 15NB G.I. pipes that connect to each other to form a wheel. • Footrest: 40NB GI pipe is attached with main frame to form a foot rest having 130x50x5 thk plate •Standing or Rotating Disc : Standing Disc of 300mm Dia round size shall be made of HDPE/Metal. 15mm thick Sheet and Plate 10mm thick for base support. •Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI / FAG / NRB make shall be provided for smooth & trouble-free movement. • Foundation Stand: The foundation stand is made from 80NB/100NB GI Pipe having 10mm thk Plate. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 40-60micron. •Pipe Materials & Class: Heavy Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class/series of pipe used. •Powder coating:it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized and as per RAL Shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap.Complete equipment to be fix in C:C Block (1:1 ½ :3) of size 50 x 50 x50 cm after deep excavation in earth at site. (The fixing charges of C:C block shall be paid separately) TERMS & CONDITIONS: - GST included in the rates. Transportation also included in the rates.

Providing and fixing Aerial Stroller / Health Walker (PGOFTRV-06IHB) of make Kompan/ Leo/ Koochie/ Hugo/ Arihant Item Descriptions • Product Area : 1m x 0.5m (5ft x 2.6ft) Technical Specification: •Post Dia: The Aerial Stroller having Ergonomic design with 80NB GI main vertical support pipes of Aerial Stroller are fixed over 10mm thick base plate. Clamping plates are attached to main frame to hold the rest of assemblies. Bottom horizontal pipe is of 50NB GI pipe. An ergonomically designed Handle frame is connected to main frame. Footrest and Handles: Footrest bend and Handle having 40NB and 25NB Dia galvanized pipe respectively. The materials used for foorest is aluminum/LLDPE/HDPE/Nylon. •Specially designed mounting flange assembly having circular flange of 130mm dia with 16mm thickness is provided for footrest assembly. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. •Pipe Materials & Class: Heavy Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class/series of pipe used. •Powder coating:it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Bearing Housing shall be made from MS material. •Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI / FAG / NRB make shall be provided for smooth & trouble-free movement. •Pins and Circlips:Pins shall be made from EN8/ MS material & Circlips made from standard material. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized and as per RAL Shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Note: Images are only for references. Actual Product or color of the product may vary. Complete equipment to be fix in C:C Block (1:1 ½ :3) of size 50 x 50 x50 cm after deep excavation in earth at site. (The fixing charges of C:C block shall be paid separately). TERMS & CONDITIONS: - GST included in the rates. Transportation also included in the rates.

Providing and fixing Pedal Push (PGOFT70B_YG) of make Kompan/ Leo/ Koochie/ Hugo/ Arihant of size 1000x300x1200 mm with main post 114 mm made of hot roller tubular steel and hot dipped galvanized and powder welded coated using Akzo Nobel of 60-80 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmentally friendly. Bearing used shall be made maintenance free, duly oil sealed and self-lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with in welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. The seat made out 50 NB GI pipe and round Rib of 32NB with hand supporting pipe 25NB in appropriate shape & design. •Pipe Materials & Class: Heavy Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class/series of pipe used. Complete equipment to be fix in C:C Block (1:1 ½ :3) of size 50 x 50 x50 cm after deep excavation in earth at site. (The fixing charges of C:C block shall be paid separately) TERMS & CONDITIONS: - GST included in the rates. Transportation also included in the rates.

Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 15m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and fixing rubber tile flooring 25mm thick made of SBR ( styrene Butadiemce Rubber ) fixed with adhesivce all complete and size as approved by Engineer - in - Charge.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: All kinds of soil.

Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand).

Providing and laying interlocking tiles on smooth CC Base, Size 30.48 x 30.48 x 1.58 cm 10.75 Pcs = 1Sqm; material weather resistance PP, weight 320G/PC (+/- 3%), surface shape HEXAGONAL Grid, Double layer provide space for water Drain and dust through floor, staple 6 locker each side to interlock the flooring around , fire rating Ul94Hb UV resistance : NO fade and abrasion in 10 years Certified by ITF 5, FIBA Approved The company should be ISO9001 ISO14001 and OHSAS 18001, CE(EN14904:2006) Certified (Colours combination as approved by Engineer in charge) (Badmointon, Vollyball, Basket ball & Skating etc. )

Supply of multipurpose M.S pole for badminton/volleyball duly painted in a pair (two in one type) made out 50mm. dia heavy duty pipe along with base socket in a pair heavy duty type of size 450 X 450x3.0mm including all necessary fixtures fittings.easy moving on 2 Double PU Wheels which are non marking braned wheels to help protect floors.

Supply of cotton base badminton net of size 0.75 X 6.10mtr in required color and standard shape with all necessary fixtures.

Providing and fixing of HORSE RIDER/ PONY SPRING RIDER (PGKD 38) of make Kompan/ Leo/ Koochie/ Hugo/ Arihant Item Descriptions • Product Area : 1m x 0.5m (3.3ft X 1.6ft) • 1 Technical Specification:- •Pony :Pony is made up of rotational molding process. It has been provided with four bolts. Pony is bolted to the spring assembly. •Spring assembly :It consists of top plate, spring,footrest & square base plate suitably fixed to each other with U-Bolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance. •Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness upto 60micron. •Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C Block shall be paid separately) TERMS & CONDITIONS: - GST included in the rates. Transportation also included in the rates.

Providing and fixing of Two-seater see saw/ Standard see-saw (PGSS-12) of make Kompan/ Leo/ Koochie/ Hugo/ Arihant Item Descriptions • Product Area : 2.5m X 0.3m (8.2ft X 1ft) Technical Specification: •Frame:Frame of standard see-saw is designed using 15NB , 20NB & 25NB G.I. pipe and it has been given radius by suitable bending techniques Plates has been welded at places were seat has to be installed so that seats can be fixed to the frame with suitable bolting arrangement. •Roto Seat :Rotational molded seats of thickness 6mm areused in these see-saw , it has been provided with bolts to fix it too see-saw frame which has a plates of 200X150X5mm welded on to the frame. Handle has been provided on the frame made up of 20NB pipe and also conforming to EN standards.The Multi Seater See saw comprises four roto seats. •For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. •See-saw stand : 50NB Hot dip Galvanized Pipe with GI thickness of 60μ ,Pipe length 550mm Plate 150X150X5mm is used as a foundation plate for the vertical pipe. •Standard See-saw Clamp: Standard see saw clamp is used in see saw so as to provide required motion for the see saw. •Bearing:The bearing used in this item is heavy duty nylon bush type •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. •Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C Block shall be paid separately) TERMS & CONDITIONS: - GST included in the rates. Transportation also included in the rates.

Providing and fixing of Merry Go Round/ Four-Seater MGR (PGMR 05) of make Kompan/ Leo/ Koochie/ Hugo/ Arihant Item Descriptions • Product Area : 2.1m Dia (7 ft Dia.) Technical Specification: •MGR frame : MGR Frame made from 40NB pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting the ROTO/FRP Seats over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong structure. The GI plated bowl is used to cover the top of the bearing assembly. •Seat frame :20NB GI pipe bend and joint to form a frame structure with flat plate to mount seat. The frame is bolted to the MGR frame outer end. The frame is provided with spacers for foot rest. Hand Grip conforming to EN1176-1:1998. •Bearing assembly :Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI / FAG / NRB make shall be provided for smooth & trouble-free movement. The whole structure is mounted on heavy-duty bearing shaft. •Center suppor : 80NB hot dip galvanized center support pipe of length 500mm with GI thickness of 40-60μ .This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top for assembling the bearing. •Seat :MGR seat is made up of Fiber reinforced plastic(FRP)/LLDPE. Seat designed to accommodate one child per seat with backrest; The seat is bolted to the assembly with special structure. •FRP Product :All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 40-60micron. •Powder coating: it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO 9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C Block shall be paid separately) TERMS & CONDITIONS: - GST included in the rates. Transportation also included in the rates.

Providing and fixing of A Swing/ Double Arc Swing (PGSW02) of make Kompan/ Leo/ Koochie/ Hugo/ Arihant Item Descriptions • Product Area : 3.2m x 1.5m (10.5ft x 5ft) Technical Specification: •Arc swimg frame :6000mm long 80NB Pipe bent in Single Piece & welded together with a flange 5mm thick & ISA of 40x40x5mm to form a strong frame. The 80NB pipe is hot dip galvanized pipe with GI thickness of 60μ. Height of the frame is 2700mm. •Top pipe : 50NB Top Pipe with two Arc Swing Flanges welded at both its ends. Pipe can withstanding torsional stress created due to swinging motion. 50NB top pipe is hot dip galvanized pipe of length 2950mm with GI thickness of 60μ. •Seat assembly : 1) Swing clamp assembly :Swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin.The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are from injection molded Nylon-6 plastic. 2) Chain :Rubber dip molded swing chain of dia. 6mm & 1450mm Long. 3) Hook :S-Hook of dia 8mm & 145x130 Triangular hook of Grade SS 304. 4) Seat :Rubber Seat made by Natural Rubber with sufficient reinforcement. •Powder coating : It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Bearing: Bearing is self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. •Pins and Circlips: 12mm diameter pins shall be made from EN8 material & Circlip A10. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate:ISO9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C Block shall be paid separately) TERMS & CONDITIONS: - GST included in the rates. Transportation also included in the rates.

Providing and fixing of 90cm Slide/ Mini Wave Slide (PGSD34) of make Kompan/ Leo/ Koochie/ Hugo/ Arihant Item Descriptions • Product Area : 2.2m x 0.6m (7.2ft x 2ft) Technical Specification: •Landing support: It is made from 25NB anti corrosive Galvanized Pipe with GI coated Base Plates together with standard ISA Foundation Angles to provide strong support • Supports: It is made from 50NB of length 1350mm anti corrosive Galvanized Pipe with GI coated Circular Flange & bracket together with standard ISA Foundation •FRP Mini Wave Slide Chute:It is made up of Fiber einforced Plastic. •Ladder Step: It is Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176-1:1998 conforming to EN1176-1:1998 The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •Ladder Frame:The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 20 NB pipes respectively. •For FRP product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. •Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the echnical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions of engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder oating), and fixing of equipment etc. (The fixing charges of C:C Block shall be paid separately) TERMS & CONDITIONS: - GST included in the rates. Transportation also included in the rates.

Providing and fixing of Balancing Bridge (PGTH 03) of make Kompan/ Leo/ Koochie/ Hugo/ Arihant Item Descriptions • Product Area : 7.3m X 0.8m (24ft X 2.6ft) Technical Specification: •Side frame :40NB & 25NB hot dip galvanized pipe with GI thickness of 60μ fixed together with base plates at bottom end to form balancing bridge side frame •Top pipe : 50NB pipe is hot dip galvanized pipe of height 4830mm with GI thickness upto 60μ with an ISF conforming to IS 1730-1961 welded at its one ends pipe can withstand torsional stress created due to swinging motion •Support pipe :40NB hot dip galvanized pipe of length 2160mm with GI thickness of 60μ with base plates at bottom end to form balancing bridge support structure. •Floats :Eight Floats of dia 600mm dia is made from rotational molded LLDPE plastic suspended over two parallel MS wire of dia. 12mm 15.5ft. long. The material used is LLDPE plastic with UV stabilizers for prolong outdoor application. •Rope :Polypropylene (PP) braided Rope of dia 18mm suspended between two sides frames for children to hold grip for support against falling. Rope size conforming to standards minimum grip requirement EN 1176-1:1998. •Rotational Molded Products :The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C Block shall be paid separately) TERMS & CONDITIONS: - GST included in the rates.

Supply & installation of Automatic Boom Barrier / Gate Bariier 6.00m length (aluminium boom), Electromechanical (right / left version) from reputed companies like FAAC/CAME/MAGNATIC Auto Control/MOTION /TECH /BHARAT TRADE AUTOMATION or equivalant as approved by Enginner - in - charge with opening closing time - 5-6 Seceond, telescopic boom type - locking arrengment, Double PWR Balancing Piston Spring, inbuilt Chanel Receiver -433.92 MHz or control panel or PWR Safety through MCB, push button, 4 J hooks, foundation plate, Olive round boom push button, operating tempreture -20°/+50°, etc. including civil work like demolishing Cement concrete, excavation foundation work in cement concrete 1:1.5:3 including cabling (electrical work) including GST, other taxes, transportation at site etc. complete with following specification :- (a)Geared Power motor with .75HP Brushless DC motor. (b)Motor rating power -150W power consumption -100 Watt. (C)Type of Barrier - Electro mechanical Boom Barrier. (d)Boom rising and falling. 300 time/day. (e)Working Voltage AC- 220V, 50v =- 10% 50 Hz. (f)Motor working time-6 million times. (g)Protection IP-Protection IP-55 & weight of barrier approx. 45 kg. (h)Intelligent overheating protection system, solving the problem of heat-protection. (i)Interface: Safety as photocell & loop detector or inbuilt interface IC system. (j)Operated by: Radio Receiver with remote control & Pushbutton. Colours options available Yellow & Grey. (k)Optional extra Access features - always can be use in Advance features with UHF RFID access. (l)Controller - Microprocessor Based Controller. (m)Aluminium Boom Size Hollow Section 100*44mm). (n)Version optional - Version - Left / Right in Steel Housing box. (o)Dimension of barrier as per manufactures specification. (p)Durability - 8 -10 year Long life working Durability with on safe mode, Depend on Client with safety or caring Product). (q)Motor motion Control - Limit Switch & balanced Double spring system. (r)Including Items or accessories - bellow :- (i)One Pushbutton (ii)One Remote each barrier (iii)One boom rest (iv)Pair of Photocell (Safety Sensor) each (Rates are inclusive of fixing at site which includes excavation, foundation in cement concrete 1:1:5:3, Cabling as per requirement, transportation at site, GST & other Taxes applicable). The contractor has to procure boom barrier from FAAC/CAME/ MAGNETIC AUTO CONTROL/MOTION/TECH/BHARAT TRADE AUTOMATION Approved by engineer in charge.