Industrial Training Institute Tender

CATEGORY: Rule Steel , Rule Wooden 4 fold , Hacksaw Frame adjustable Lovely , Scriber , Centre punch , Chisel Cold, flat , Hammer ball peen , File flat rough JK , Level spirit wooden , Plumb bob , Trowel , Stillson wrench , Screw Driver , Wooden Mallet small , Cutting pliers 200mm , Steel tape , Surface plate , Marking Table , V Blocks with clamps , Combination set , Scribing Block Universal , Hand Vice, Jaw , File Flat, Smooth JK , File Half Round, Rough JK , File, Square, rough JK , File, Square, Smooth JK , File Triangular Rough JK , File Flat Rasp JK , File Triangular Smooth JK , Chisel Cold Flat , Chisel Cross Cut , Chisel Round Nose , Chisel Diamond Point , Tap and Die set B.S.F. , Tap and Die set B.S.W. , Tap and Die set metric threads , Screw Pitch gauge B.S.F. threads , Screw Pitch gauge B.S.W. threads , Screw Pitch gauge Metric threads , Punch , Letter set , Punch , Number set , Saw Plumber , Spanner monkey up to , Stove melting solder , Cutter ,Pipe, wheel type , Oil stone , Soldering Iron , Copper , Bit , Fire heated , Hatched , Straight , , Snip Straight , Snip bend , Try square , Inside Caliper , Caliper outside , Odd leg calliper , Pliers combination, Taparia , Blow lamp , Washer cutter , D. E. Spanners , Plumbers Laddle 8 , Pipe stock and dies complete with stocks , Pipe vice , Stillson pattern pipe wrenches , Adjustable spanner size 10 to 25mm , Pipe bender, manually operated , Hand drill 6mm capacity with drill chuck , Drill Twist straight shank , working bench steel , Wash Basin Equivalent metric , Water meter , Green Board with glass , Hammering drilling machine Bosch , Electric water pump, 1 HP 220V , Rachet pipe die , Bench drilling machine with chuck and key upto 15mm capacity , Double face hammers , Ring guage