Indian Institute Of Technology Tender
... More
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Indian Institute Of Technology - IIT Tender
Civil And Construction
Building Construction
Eprocure
Opening Date21 Feb 2025
Closing Date4 Mar 2025
Tender Amount₹ 2,28,74,416
Technical
Technical
Financial
Bid Capacity
... View More
The bid capacity required can be expressed in terms of the estimated cost of the tender and the specified percentages. The formulas are: - 40% of the estimated cost for three similar works.
- 60% of the estimated cost for two similar works.
- 80% of the estimated cost for one similar work.
Additionally, a specific bid capacity required is mentioned as 1,37,25,000.00, or three similar works each of value not less than Rs. 91,50,000.00 during the last 7 years.
Technical Capacity
... View More
The required prior work experience for the bidder includes having satisfactorily completed similar works of a specified magnitude. The criteria for eligibility include: - Three similar works each of value not less than 40% of the estimated cost, - Two similar works each of value not less than 60% of the estimated cost, - One similar work of value not less than 80% of the estimated cost, all of which should have been completed during the last 7 years. The value of executed works shall be brought to the current costing level by enhancing the actual value of work at a simple rate of 7% per annum. Specific values mentioned include Rs. 1,37,25,000.00 (for one similar work), Rs. 91,50,000.00 (for three similar works each). Additionally, for civil work valued between 1.5 to 5 Crore, a Graduate Engineer or Diploma Engineer with a minimum experience of 2 or 5 years, respectively, is required as a Project Manager Cum planning/ Quality/ Site/ billing Engineer. A Diploma Holder with a minimum of 10 years of relevant experience can be treated at par with a Graduate Engineer, provided they do not exceed 50% of the requirement of degree Engineers.
Costs
EMD
₹ 4,57,489Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
A.r. And M.o. To Buildings In Residential Area Of West Campus At Iit Delhi During The Year 2025-26
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_IIT_850450_1Tender No
IITD/WORKS(SP-4939)/2025Tender Authority
Indian Institute Of Technology ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
A.R. and M.O. to Buildings in Residential Area of West campus at IIT Delhi during the year 2025-26
BOQ Items
... More
REINFORCED CEMENT CONCRETE
-
-
-
... More
Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
1530
-
-
... More
FINISHING
-
-
-
... More
12 mm cement plaster of mix:
-
-
-
... More
1:6(1 cement: 6 fine sand)
200
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:
-
-
-
... More
1:6 (1 cement: 6 fine sand)
200
-
-
... More
6 mm cement plaster of mix :
-
-
-
... More
1:3 (1 cement : 3 fine sand)
902
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
10000
-
-
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour
-
-
-
... More
Old work (one or more coats)
78558
-
-
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
-
-
-
... More
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
10000
-
-
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
10000
-
-
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:
-
-
-
... More
One or more coats on old work
7828
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
... More
One or more coats on old work
17421
-
-
... More
French spirit polishing :
-
-
-
... More
One or more coats on old work
5310
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade
-
-
-
... More
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface
6000
-
-
... More
Old work (one or more coats applied @ 0.83 ltr/10 sqm).
20000
-
-
... More
REPAIRS TO BUILDING
-
-
-
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
-
-
-
... More
With cement mortar 1:4 (1cement: 4 coarse sand)
600
-
-
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
1200
-
-
... More
NEW TECHNOLOGIES AND MATERIALS
-
-
-
... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
-
-
-
... More
25 mm average thickness
902
-
-
... More
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
-
-
-
... More
Bars upto 12 mm diameter
18378
-
-
... More
Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.
-
-
-
... More
Upto and including 12mm dia.
19000
-
-
... More
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.
-
-
-
... More
Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make
902
-
-
... More
Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.)
-
-
-
... More
Epoxy injection grout in concrete/RCC work of approved make
450
-
-
... More
Providing and inserting 12 mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20 mm to 30 mm) up to depth from 30 mm to 80 mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer- In-Charge.
300
-
-
... More
Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. (weight should not be less then 7.75kg/sqm)
902
-
-
... More
Non Schedule Items
-
-
-
... More
Providing, mixing and applying one coat over reinforcement bars zinc anti rust agent as per specification and direction of Engineer-in-charge (Dosage/coverage as per the site requirement). FAIR MATE (SAFE CORE R) Chipped surface area of concrete shall be measured for payment.
902
-
-
... More
Providing mixing & applying pre-batched one component polymer modified dual shrinkage compensated thixotropic cementious patch repair mortar as per the manufacturer specifications and as per the direction the Engineer-in-charge. The comperessive strength of polymer modified mortar shall be ≥ 45 Mpa (28 Days) according to ASTM C109. ( Product :- Renderock S2 of Fosroc/ SikaTop® 122 HS of Sika / MasterEmaco S 348 of BASF or equivalent of Pidilite)For 20 mm thickness over slab, beams, columns and stair case slabs.
902
-
-
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour:
-
-
-
... More
Old/ New work (two or more coats)
10000
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%