Indian Institute Of Technology Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Indian Institute Of Technology - IIT Tender
Civil And Construction
Laboratory Equipment and Services
Road Construction
Electrical and Electronics
Electrical Works
Eprocure
Opening Date22 Jan 2025
Closing Date11 Feb 2025
Tender Amount₹ 13,21,18,730
Technical
Technical
Financial
Bid Capacity
... View More
The bid capacity required in the given tender to bid can be calculated using specific formulas and values provided. To determine the bid capacity, bidders must have completed works of certain values within the last 7 years. The required bid capacity can be met in three different ways:
(i) Three similar works each costing not less than 40% of the estimated cost, (ii) Two similar works each costing not less than 60% of the estimated cost, or (iii) One similar work costing not less than 80% of the estimated cost. Given the estimated cost of the work is Rs.13,21,18,730/-, the bid capacity required can be calculated as follows:
1. 40% of the estimated cost: 0.4 * 13,21,18,730 = 5,28,47,492
2. 60% of the estimated cost: 0.6 * 13,21,18,730 = 7,92,71,238
3. 80% of the estimated cost: 0.8 * 13,21,18,730 = 10,56,94,984 Additionally, another formula for calculating bidding capacity is: Bidding Capacity = {[AxNx1.5]-B} Where, A = Maximum turnover in construction works executed in any one year during the last seven years, N = Number of years prescribed for completion of work for which bids have been invited, B = Value of existing commitments of ongoing works during the period of execution of work for which bids have been invited. The value of completed works shall be brought to the current costing level by enhancing at a simple rate of 7% per annum. Therefore, the bid capacity required in the given tender to bid is:
- Three similar works each of value not less than Rs.5,28,47,492
- Or two similar works each of value not less than Rs.7,92,71,238
- Or one similar work of value not less than Rs.10,56,94,984.
Technical Capacity
... View More
The required prior work experience for the bidder includes completing similar works with specific values and percentages. For Civil Works, the criteria are: - Three similar works each costing not less than Rs.44.07 lacs, - Two similar works each costing not less than Rs.66.10 lacs, - One similar work costing not less than Rs.88.14 lacs. For Electrical Works, the criteria are: - Three similar works each costing not less than Rs.159.71 lacs, - Two similar works each costing not less than Rs.239.56 lacs, - One similar work costing not less than Rs.319.42 lacs. For Composite work: - One similar work of value not less than Rs.10,56,94,984, - Two similar works each of value not less than Rs.7,92,71,238, - Three similar works each of value not less than Rs.5,28,47,492. Additionally, the bidder should have an Average Annual Turnover certificate for at least 30% of the Estimated Cost, i.e., Rs.3.94 Crores, and a Solvency Certificate of 40% of the Estimated Cost, i.e., Rs.5.28 Crores. The value of executed similar work shall be brought to the current costing level by enhancing the actual value of work at a simple rate of 7% per annum. For specialized agencies, the bidder should have experience of: - 3 similar works of 40% value of the specialized work component of the tendered amount, - 2 similar works of 60% value of the specialized work component of the tendered amount, - 1 similar work of 80% value of the specialized work component of the tendered amount. The bidding capacity shall be worked out by the formula: Bidding Capacity = {[AxNx1.5]-B}, where A is the maximum turnover in construction works, N is the number of years prescribed for completion of work, and B is the value of existing commitments of ongoing works.
Costs
EMD
₹ 23,21,188Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Setting Up Dry Labs In Academic Complex East (99c) And Academic Complex West (99b) At Iit Delhi.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_IIT_845437_1Tender No
IITD/WORKS (SP-4893)/2025Tender Authority
Indian Institute Of Technology ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Setting up dry labs in Academic Complex East (99C) and Academic Complex West (99B) at IIT Delhi
BOQ Items
... More
Base storage Cabinet -1 Drawer & 1 Shutter, Size = 457mm(L) x 550mm(D) x 762mm (H)
112
-
-
... More
Base storage Cabinet -1 Drawer & 1 Shutter, Size = 457mm(L) x 550mm(D) x 914mm (H)
177
-
-
... More
Base storage Cabinet -1 Drawer & 1 Shutter, Size = 610mm(L) x 550mm(D) x 762mm (H)
311
-
-
... More
Base storage Cabinet -1 Drawer & 1 Shutter, Size = 610mm(L) x 550mm(D) x 914mm (H)
355
-
-
... More
Base storage Cabinet -1 Drawer & 1 Shutter, Size = 762mm(L) x 550mm(D) x 762mm (H)
2
-
-
... More
Base storage Cabinet -1 Drawer & 2 Shutter, Size = 762mm(L) x 550mm(D) x 762mm (H)
137
-
-
... More
Base storage Cabinet -1 Drawer & 2 Shutter, Size = 762mm(L) x 550mm(D) x 914mm (H)
9
-
-
... More
Base storage Cabinet -1 Drawer & 2 Shutters, Size = 914mm(L) x 550mm(D) x 914mm (H)
4
-
-
... More
Base storage Cabinet -1 Shutter, Size = 350mm(L) x 550mm(D) x 762mm (H)
2
-
-
... More
Base storage Cabinet -1 Shutter, Size = 350mm(L) x 550mm(D) x 914mm (H)
25
-
-
... More
Base storage Cabinet -1 Shutter, Size = 380mm(L) x 550mm(D) x 914mm (H)
3
-
-
... More
Base storage Cabinet -1 Shutter, Size = 457mm(L) x 550mm(D) x 762mm (H)
51
-
-
... More
Base storage Cabinet -1 Shutter, Size = 457mm(L) x 550mm(D) x 914mm (H)
2
-
-
... More
Base storage Cabinet -1 Shutter, Size = 610mm(L) x 550mm(D) x 762mm (H)
67
-
-
... More
Base storage Cabinet -1 Shutter, Size = 610mm(L) x 550mm(D) x 914mm (H)
6
-
-
... More
Base storage Cabinet -2 Shutter, Size = 457mm(L) x 550mm(D) x 914mm (H)
2
-
-
... More
Base storage Cabinet -2 Shutter, Size = 762mm(L) x 550mm(D) x 914mm (H)
4
-
-
... More
Base storage Cabinet -2 Shutters, Size = 750mm(L) x 550mm(D) x 914mm (H)
1
-
-
... More
Base storage Cabinet Sink , Size = 762mm(L) x 550mm(D) x 914mm (H)
95
-
-
... More
Base storage Cabinet Sink , Size = 900mm(L) x 550mm(D) x 914mm (H)
1
-
-
... More
Base storage unit 1 Door 1 Shutter - 457(L) x 550(D) x 914(H)
10
-
-
... More
Base storage unit 1 Door 1 Shutter - 610(L) x 550(D) x 914(H)
12
-
-
... More
Base storage unit 2 Door 1 Drawer - 762(L) x 550(D) x 914(H)
12
-
-
... More
Base unit Corner 1 Door Size = 355mm(L) x 550mm(D) x 762mm
44
-
-
... More
Base unit Corner 1 Door Size = 355mm(L) x 550mm(D) x 914mm(H)
69
-
-
... More
Base unit Corner Sink 1 Door Size = 355mm(L) x 550mm(D) x 762mm(H)
2
-
-
... More
Base unit Corner Sink 1 Door Size = 355mm(L) x 550mm(D) x 914mm(H)
5
-
-
... More
Base unit Sink 1 Shutter Size = 355mm(L) x 559mm(D) x 914mm(H)
2
-
-
... More
Base unit Sink 2 Door- 762(L) x 550(D) x 914(H)
3
-
-
... More
Wall Storage cabinet
Gauges of steel used in construction of cases shall be 18 gauge except as follows:
a. Levelling bolt reinforcements 12 gauge or 2 mm.
b. Case and drawer suspension channels, 14 gauge.
c. Top and intermediate front horizontal rails, apron rails, hinge reinforcements, and reinforcement gussets, 16 gauge or 1.2mm.
d. Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 20 gauge or 0.8mm.
Epoxy Powder Coating.
e. The thickness of the epoxy powder coating should be between 80 and 100 microns.
-
-
-
... More
Wall storage Cabinet -2 Glass Shutter, Size = 1200mm(L) x 300mm(D) x 600mm (H)
6
-
-
... More
Wall storage Cabinet -2 Glass Shutter, Size = 600mm(L) x 300mm(D) x 600mm (H)
348
-
-
... More
Wall storage Cabinet -2 Glass Shutter, Size = 750mm(L) x 300mm(D) x 600mm (H)
13
-
-
... More
Tall Storage Cabinet
Gauges of steel used in construction of cases shall be 18 gauge except as follows:
a. Levelling bolt reinforcements 12 gauge or 2 mm.
b. Case and drawer suspension channels, 14 gauge.
c. Top and intermediate front horizontal rails, apron rails, hinge reinforcements, and reinforcement gussets, 16 gauge or 1.2mm.
d. Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 20 gauge or 0.8mm.
Epoxy Powder Coating.
e. The thickness of the epoxy powder coating should be between 80 and 100 microns.
-
-
-
... More
Tall storage cabinet with Glazed door : 610(L) X 559(D) X 2100(H)
2
-
-
... More
Tall Storage Cabinet with Glazed door, Size = 762mm(L) x 550mm(D) x 2100mm (H)
2
-
-
... More
Tall storage unit With Lock: 900(L) X 550(D) X 2100(H)
3
-
-
... More
Apron Storage unit
-
-
-
... More
Apron storage cabinet : 610(L) X 559(D) X 2100(H)
3
-
-
... More
Knee Space
Knee space panels, where shown or specified, shall be 20 gauge, finished same as casework cabinets, and easily removable for access to mechanical service areas.
-
-
-
... More
Knee Space Panel with Accessorries - 610Lx00Dx762H
331
-
-
... More
Knee Space Panel with Accessorries - 610Lx00Dx908H
404
-
-
... More
Knee Space Panel with Accessorries - 750Lx00Dx908H
16
-
-
... More
Knee Space Panel with Accessorries - 762Lx00Dx762H
126
-
-
... More
Knee Space Panel with Accessorries - 762Lx00Dx908H
83
-
-
... More
Knee Space Panel with Accessorries - 900Lx00Dx762H
13
-
-
... More
Knee Space Panel with Accessorries - 914Lx00Dx762H
1
-
-
... More
Knee Space Panel with Accessorries - 914Lx00Dx908H
2
-
-
... More
Knee Space Support
272
-
-
... More
Reagent Racks
Reagent racks are designed to be fix on top of worktop. It will have 12"/9” Wide & 36”/24” Height vertical Uprights made of 1.2mm thick CRCA. Each Reagent rack will have 12” wide 10mm thick Glass shelves with shelf supports and will be designed to have 2 Tier at 12” gap between each shelf. Electrical raceway will be fixed b/w the two uprights OR Each Upright will have provision for fixing 2 Nos. Sockets with switch and it will be located between the bottom shelf & the worktop. Each Shelves will have SS316 Retaining Rod all around.
-
-
-
... More
2 Tier Reagent Rack Shelf 305x1050
4
-
-
... More
2 Tier Reagent Rack Shelf 305x1093
4
-
-
... More
2 Tier Reagent Rack Shelf 305x1160
2
-
-
... More
2 Tier Reagent Rack Shelf 305x1170
26
-
-
... More
2 Tier Reagent Rack Shelf 305x1200
14
-
-
... More
2 Tier Reagent Rack Shelf 305x1250
4
-
-
... More
2 Tier Reagent Rack Shelf 305x1274
2
-
-
... More
2 Tier Reagent Rack Shelf 305x1420
16
-
-
... More
2 Tier Reagent Rack Shelf 305x1474
2
-
-
... More
2 Tier Reagent Rack Shelf 305x1500
6
-
-
... More
2 Tier Reagent Rack Shelf 305x1520
16
-
-
... More
2 Tier Reagent Rack Shelf 305x1550
2
-
-
... More
2 Tier Reagent Rack Shelf 305x1575
14
-
-
... More
2 Tier Reagent Rack Shelf 305x1600
20
-
-
... More
2 Tier Reagent Rack Shelf 305x1630
58
-
-
... More
2 Tier Reagent Rack Shelf 305x1700
8
-
-
... More
2 Tier Reagent Rack Shelf 305x1729
2
-
-
... More
2 Tier Reagent Rack Shelf 305x1800
8
-
-
... More
2 Tier Reagent Rack Shelf 305x1900
2
-
-
... More
2 Tier Reagent Rack Shelf 305x2000
2
-
-
... More
2 Tier Reagent Rack Work Top 305x1050
4
-
-
... More
2 Tier Reagent Rack Work Top 305x1093
4
-
-
... More
2 Tier Reagent Rack Work Top 305x1160
2
-
-
... More
2 Tier Reagent Rack Work Top 305x1170
26
-
-
... More
2 Tier Reagent Rack Work Top 305x1200
14
-
-
... More
2 Tier Reagent Rack Work Top 305x1250
4
-
-
... More
2 Tier Reagent Rack Work Top 305x1274
2
-
-
... More
2 Tier Reagent Rack Work Top 305x1420
16
-
-
... More
2 Tier Reagent Rack Work Top 305x1474
2
-
-
... More
2 Tier Reagent Rack Work Top 305x1500
6
-
-
... More
2 Tier Reagent Rack Work Top 305x1520
16
-
-
... More
2 Tier Reagent Rack Work Top 305x1550
2
-
-
... More
2 Tier Reagent Rack Work Top 305x1575
14
-
-
... More
2 Tier Reagent Rack Work Top 305x1600
20
-
-
... More
2 Tier Reagent Rack Work Top 305x1630
58
-
-
... More
2 Tier Reagent Rack Work Top 305x1700
8
-
-
... More
2 Tier Reagent Rack Work Top 305x1729
2
-
-
... More
2 Tier Reagent Rack Work Top 305x1800
8
-
-
... More
2 Tier Reagent Rack Work Top 305x1900
2
-
-
... More
2 Tier Reagent Rack Work Top 305x2000
2
-
-
... More
Reagent Rack Support - 600H x 50D X 350L
212
-
-
... More
Worktop
-
-
-
... More
20 mm thick Jet Black Granite with Skirting.
The worktops shall be 18/19mm Jet black Granite of an even surface and the level. Tolerance less than 1 mm. The front edge of the granite shall be chamfered at an angle of 28 deg and smoothened. The back splash for the wall bench shall be granite 18/19mm thick material for an height of 4” from the finished table top level.
1061
-
-
... More
Laminate Work Top 25mm thick
Plastic laminate tops and back-splash shall be built up to a 1/16" thick plastic surface (of the colour and pattern selected), attached to the sub-top with a water-resistant adhesive. The substrate shall be 40-45 lbs. medium density particle board to make a finished top thickness of 1". All exposed edges shall be self-edge banded unless otherwise specified. All particle board edges, and underside of top shall be sealed.
68
-
-
... More
Rubber Base moulding
-
-
-
... More
Base moulding and accessories
2655
-
-
... More
Corner clip and accessories
2110
-
-
... More
Side panel
-
-
-
... More
Side, End, Rear & Support Panel with Acccessories
585
-
-
... More
Sinks and accessories
The sinks should be injection molded from Poly propylene co-polymer resin. Polypropylene to have very high resistance to attack from a wide range of chemicals and the ability to withstand temperatures up to 100 deg C. The impact resistance should be high which will minimize damage during and after installation. The sinks should be with self-draining base and should be suitable for mounting on top or underside of the work benches. The sinks should be compatible to a vast number of acids, alkalis and reagents. All gaskets and O-rings are made from Nitrile.
-
-
-
... More
PP Sink Size : 600Lx400Dx450Hmm
93
-
-
... More
PP Sink Size : 800Lx460Dx320Hmm
14
-
-
... More
Waste, 1 1/2 BSP X 76mm.
107
-
-
... More
Anti siphon bottle trap.
107
-
-
... More
Reducing coupler in PP 51 X 31mm + PP Pipe lengths - 5mtr length - Dia 38mm upto nearest Drain
107
-
-
... More
Acrylic Pegboard Board with 23 pegs with SS 316L Tray, 610L x 610mm(H) With 90 Degree bend tube upto sink
50
-
-
... More
Bench Fittings
-
-
-
... More
Bench fitting with 1 needle valve 90° for Vacuum Air
12
-
-
... More
Bench Fitting with 1Needle Valve 90 Degree for Argon
7
-
-
... More
Bench Fitting with 1Needle Valve 90 Degree for Compreesed Air
11
-
-
... More
Bench Fitting with 1Needle Valve 90 Degree for DM water
2
-
-
... More
Bench Fitting with 1Needle Valve 90 Degree for Nitrogen
27
-
-
... More
Bench Fitting with 1Needle Valve 90 Degree for portable water
3
-
-
... More
Bench Fitting with 1Needle Valve 90 Degree for Potable Water
3
-
-
... More
Bench mounted 3-way water fitting with 8" rigid/swing gooseneck with aerator for Potable water
35
-
-
... More
Bench mounted 3-way water fitting with 8" rigid/swing gooseneck with aerator for Raw water
23
-
-
... More
Wall Fitting with 1Needle Valve 90 Degree for Nitrogen
2
-
-
... More
Eye wash
-
-
-
... More
Eye Wash / Drench Hose - Providing and fixing emergency eye wash / Drench hose, table mounted with two gentle spray outlet heads with necessary accessories
34
-
-
... More
Service Pendent
-
-
-
... More
Service pendant with all its accessories with upto false ceiling - 350x150
404
-
-
... More
Electrical Raceway
-
-
-
... More
Metal Electrical Raceway, 125Hx75D
1139
-
-
... More
Metal Electrical Raceway(floor Mounted Equipments- 125Hx75D
9.5
-
-
... More
Worktop support
-
-
-
... More
Floor standing worktop support : 908Hx200L
4
-
-
... More
Cross over Bench
-
-
-
... More
SS 304 Cross Over Bench - Size ,1524L x 450D x 450H, with Shoe rack below
1
-
-
... More
Sitting Height Finished Back with Sliding Door- 1250Lx25Dx750H
24
-
-
... More
Electrical Sockets
-
-
-
... More
6/16A sockets with all accessories
2583
-
-
... More
32A sockets with all accessories
42
-
-
... More
20A sockets with all accessories
17
-
-
... More
63A sockets with all accessories
3
-
-
... More
Data Socket
-
-
-
... More
Data sockets with all accessories
451
-
-
... More
Anti Vibration Table
-
-
-
... More
Anti Vibration Table size - 908(H) x 610(D) x 914(L) , Made up of 80mm x 80mm Tubular frame with 80mm Thk Granite top (300 x 500) & Phenolic top, Vibration Pads, Accuracy level up to 4Decimalpoints with covering panel. 18 electrical metal raceway with 2nos, 6/16A Electrical Sockets with Switch, 1Mtr Length cabling with plug top.
1
-
-
... More
Anti Vibration Table size -750(H) x 610(D) x 914(L) , Made up of 80mm x 80mm Tubular frame with 80mm Thk Granite top (300 x 500) & Phenolic top, Vibration Pads, Accuracy level up to 4Decimalpoints with covering panel. 18 electrical metal raceway with 2nos, 6/16A Electrical Sockets with Switch, 1Mtr Length cabling with plug top.
1
-
-
... More
Frame Table
-
-
-
... More
H Frame with 20 mm Granite Worktop-1828(L)x1219LX900(H)
1
-
-
... More
H Frame with Worktop-1308(L)x1000LX900(H)
1
-
-
... More
H Frame with Worktop-1550(L)x900DX900(H)
8
-
-
... More
H Frame with Worktop-2050(L)x900DX900(H)
3
-
-
... More
Moveable H Frame with Worktop-1200(L)x1200DX762(H)-3 Side Barrier
8
-
-
... More
Moveable H Frame with Worktop-600(L)x650DX908(H)-3 Side Barrier
1
-
-
... More
Open Rack (Slotted angle Rack)
-
-
-
... More
Slotted Angle open rack with 5 Shelves, Size - 750L x 550D x 2100H with 4 Side Metal Lipping.
6
-
-
... More
Solvent unit
-
-
-
... More
Classical door technology (door handle) for the storage of flammable liquids type testing by, MPA/TÜV SÜD according to DIN EN 14470-1, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2014: 01 PAK mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD construction and colour:outer carcass sheet steel, RAL 7035
door sheet steel, RAL 1018
inner carcass of decor panels, RAL 7035 fittings and features:
door closes automatically in case of fire
door remains open in every position
cylinder lock for safe access
bottom tray sheet steel, RAL 7035
4 storage shelves sheet steel, RAL 7035
exhaust air connection socket on the cabinet roof
visual inspection of the ventilation opening
earthing connection on the cabinet roof
interior fittings conductively connected with carcass
adjustable foot for level adjustment
set-back base, RAL 7015
-
-
-
... More
Solvent Store Cupboard , Size - 1194L x 612D x 2045H (Duparthal)
1
-
-
... More
Chemical Storage Cupboard
-
-
-
... More
Supply and Installation of Tall storage cabinet of size 750W x 550D x 2100 H with Manual closing door, Equipped with a lockable, latching mechanism, CRCA, exterior phosphate coated with baked chemical resistant synthetic resin finish, with Glazed doors, approved quality hinge and operating hardware. Cabinet shall also have Adjustable levelling screws, galvanized steel shelves complete as per the detailed specification.
-
-
-
... More
Tall unit swinging panel door with bottom louvers & Vent hole, Phenoloic resin liner inside, With 5nos. 16mm Thick phenolic shelves - 750L x 550D x 2100H
1
-
-
... More
Floor Mounted Safety Station
-
-
-
... More
Providing and fixing in position Floor mounted emergency safety station powder coated finish on galvanized pipe and fittings includes ABS plastic shower head operated by a rigid pull rod, easy grip handle, complete with an elbow, connecting pipe and ball valve. The combination eyewash with eyewash bowl, valve, fittings and accessories.
-
-
-
... More
Floor mounted Safety Shower with Eye wash
1
-
-
... More
Sitting bench with Shoe Rack below MOC as CRCA , Powder Coated Finish
-
-
-
... More
SS 304 Cross Over Bench - Size ,1524L x 450D x 450H
1
-
-
... More
Lab Chair & Stools
-
-
-
... More
1. Lab chair constructed with foam or leather seat & Back rest with PU armrest.
2. Having chrome plated hydraulic height adjustable
3.Height adjustable from 700mm to 910mm
4. Having chrome plated 18” dia foot rest ring with chrome base, Castors wheels
6. Top seat dia 450mm
138
-
-
... More
1. SS Lab stool constructed with stainless steel (SS304) Material.
2.Stainless steel (SS 304) Top seat 3.Having chrome plated hydraulic height adjustable
4.Height adjustable from 460mm to 680mm.
5. Having chrome plated 16” dia foot rest ring With chrome base, Castors wheels
6. Top seat dia 450mm
337
-
-
... More
Civil Work
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
8661
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
1575
-
-
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
-
-
-
... More
Pre-laminated particle board with decorative lamination on both sides.
520
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
303
-
-
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
50
-
-
... More
Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge
-
-
-
... More
Powder coated minimum thickness 50 micron aluminium
100
-
-
... More
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete complying to ASTM C920, DIN 18540-F & ISO 11600.
-
-
-
... More
Upto 5mm depth and 5 mm width
709
-
-
... More
Upto 10 mm depth and 10 mm width
801
-
-
... More
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum).
-
-
-
... More
Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm.
-
-
-
... More
Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
-
-
-
... More
With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.
418
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
-
-
-
... More
shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
... More
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)
200
-
-
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
-
-
-
... More
Two coats.
6272
-
-
... More
Providing and fixing roller blinds, the fabric should be screen openness of 5% and composition of 75% PVC and 25% polyester with fabric weight of 465 GSM having fire resistance grade of NSPA 701, BS 586 part- II with anodized aluminium channel weight, bracket and hangers etc complete. The fabric will be approved colour and shed of approved manufacturer complete.
796
-
-
... More
Providing and fixing self adhesive frosted/decorative/sun control film on glass partition, glass door and windows of approved design and make 3M / Garware or equivalent all complete as per direction of Engineer-in-charge.
303
-
-
... More
Electrical Work
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group C
200
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1500
-
-
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1600
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
800
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
2000
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
1200
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
700
-
-
... More
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
700
-
-
... More
2 X 16 sq. mm + 1 X 6 sq. mm earth wire
500
-
-
... More
4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
700
-
-
... More
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
600
-
-
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
300
-
-
... More
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.
-
-
-
... More
Group C
400
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
3 x 1.5 sq. mm
800
-
-
... More
3 x 2.5 sq. mm
2100
-
-
... More
6 x 2.5 sq. mm
1200
-
-
... More
3 x 4 sq. mm
3000
-
-
... More
6 x 4 sq. mm
2000
-
-
... More
3 x 6 sq. mm
1500
-
-
... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm
800
-
-
... More
25 mm
800
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm
1000
-
-
... More
25 mm
1000
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
100
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
100
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
150
-
-
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
150
-
-
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
... More
100 A,30KA,FPMCCB
50
-
-
... More
125 A,36KA,FPMCCB
50
-
-
... More
200 A,36KA,FPMCCB
10
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
6 way , Double door
150
-
-
... More
8 way , Double door
150
-
-
... More
12 way , Double door
50
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MOB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MOB TPDB is normally used where 3 phase outlets are required.)
-
-
-
... More
4 way (4 + 12), Double door
15
-
-
... More
8 way (4 + 24), Double door
20
-
-
... More
12 way (4 + 36), Double door
15
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
3900
-
-
... More
Double pole
350
-
-
... More
Triple pole
200
-
-
... More
Supplying and fixing single pole blanking plate in the existing MOB DB complete etc. as required.
100
-
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40A
100
-
-
... More
63A
250
-
-
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40A
10
-
-
... More
63A
20
-
-
... More
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
200
-
-
... More
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.
200
-
-
... More
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
700
-
-
... More
Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
700
-
-
... More
Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
300
-
-
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
... More
For 10 way, Double door SPN MCBDB
200
-
-
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
50
-
-
... More
Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required.
-
-
-
... More
100 A TPN
10
-
-
... More
200 A TPN
10
-
-
... More
Supplying, installing, testing and commissioning of following capacity TPN distribution tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with HRC fuses, interconnections, earthing etc. as required.
-
-
-
... More
63 A TPN, 6 way
10
-
-
... More
63 A TPN, 8 way
10
-
-
... More
Supplying, installing, testing and commissioning of following capacity End Feed Unit made of 1.6mm thick sheet steel enclosure duly painted with powder coating to existing rising mains complete with TPN disconnector FSU and HRC fuses, mounting stands, cable end box, brass compression gland, connections, earthing etc. as required.
-
-
-
... More
200 A TPN
1
-
-
... More
300 A TPN
1
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
150
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
150
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
10
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
10
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
20
-
-
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
100
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
100
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
500
-
-
... More
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
500
-
-
... More
Jointing copper! G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
500
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
3.5X 35 sq. mm (32mm)
20
-
-
... More
3.5 X 50 sq. mm (35mm)
30
-
-
... More
3.5 X 70 sq. mm (38mm)
20
-
-
... More
3.5 X 150 sq. mm (50mm)
20
-
-
... More
4 X 16 sq. mm (28mm)
24
-
-
... More
Providing and fixing DLP plastic trunking of size 105 mm x 50 mm on surface as reqd.
-
-
-
... More
PVC trunking without cover of size 105 x 50 mm size
1000
-
-
... More
PVC trunking full cover of size 85 mm size
1000
-
-
... More
PVC trunking Left or right End cap
50
-
-
... More
PVC trunking Internal angle adjustable from 80°-100°
50
-
-
... More
PVC trunking External angle adjustable from 60°-120
50
-
-
... More
PVC trunking 90°Flat angle
50
-
-
... More
PVC trunking base/body joint
50
-
-
... More
6/8 Modules clip on frame with finishing plate for 85 mm cover
800
-
-
... More
Modular 16A/20 amps switch on the existing modular plate & switch box / channel including connection
1700
-
-
... More
Modular 6/16 amps multi socket on the existing moudular plate & switch box including connection.
1700
-
-
... More
Information data socket RJ45 with shutter with moudular plate
150
-
-
... More
Telephone socket RJ11 with shutter with moudular plate
150
-
-
... More
3 Modules clip on frame with finishing plate for 85 mm cover.
100
-
-
... More
Supplying, installation DLP mini- trunking 32mm x 20mm with independent cover etc. complete as reqd.
-
-
-
... More
PVC mini trunking with independent cover of size 32mm x 20mm size.
500
-
-
... More
PVC mini trunking End cap left or right.
50
-
-
... More
PVC mini trunking Internal/ External angle from 60°-120°
50
-
-
... More
PVC mini trunking Flat angle from 85°-95°
50
-
-
... More
PVC mini trunking Flat junction
50
-
-
... More
supplying and laying and Fixing of PVC insulated, PVC sheathed XLPE aluminium conductor armored cable of Following size, 1.1 KV grade on wall surface as required.Upto 35 sq. mm (clamped with 1 mm thick saddle)Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm [conforming to I.S-1554/1/8].
-
-
-
... More
4 X 16 sq. mm
500
-
-
... More
3½ X 35 sq. mm
600
-
-
... More
3½ X 50 sq. mm
400
-
-
... More
3½ X 70 sq. mm
300
-
-
... More
3½ X 150 sq. mm
250
-
-
... More
Supply and installation of SS enclosure duly powder Coated paint for housing incomming MCCB 4P, of appropiate size with incomming and outgoing opening, suitable to accommodate upto 70sqmm, 3.5 core aluminium armoured cable,with louvers for heat dissipation and mounting hole for easy wall mounting. (matter: AC / Normal / Emergency Power) etc. as required
20
-
-
... More
Supply and installation of SS enclosure duly powder Coated paint for housing incomming MCCB 4P, of appropiate size with incomming and outgoing opening, suitable to accommodate upto 300sqmm, 3.5 core aluminium armoured cable,with louvers for heat dissipation and mounting hole for easy wall mounting. (matter: AC / Normal / Emergency Power) etc. as required.
20
-
-
... More
Providing and fixing DLP plastic trunking of size 150 mm x 50 mm on surface as reqd.[Make Legrand]
-
-
-
... More
DLP plastic trunking of size 150 mm x 50 mm without cover
800
-
-
... More
PVC trunking full cover of size 85 mm size
800
-
-
... More
PVC trunking full cover of size 40 mm size
800
-
-
... More
Clip on Partition (Plastic)
800
-
-
... More
PVC trunking Left or right End cap
100
-
-
... More
PVC trunking Internal angle adjustable from 80°-100°
50
-
-
... More
PVC trunking External angle adjustable from 60°-120°
50
-
-
... More
PVC trunking 90°Flat angle
50
-
-
... More
PVC trunking Cover joint
50
-
-
... More
PVC trunking base/body joint
50
-
-
... More
6/8 Modules clip on frame with finishing plate for 85 mm cover
800
-
-
... More
1 Modules clip on frame with finishing plate for 40 mm cover
200
-
-
... More
Modular 16A/20 amps switch on the existing modular plate & switch box / channel including connection
1600
-
-
... More
Modular 6/16 amps multi socket on the existing moudular plate & switch box including connection.
1600
-
-
... More
Supply, Making, Testing & commissioning of Advance maintenance free Chemical Gel Earthing of single pipe Technology( copper) of 3 mtr. long 50 mm dia fiiled with highly conducting metallic compound with the permanent sealings at the both the ends with the lead terminal 32x10mm at the top along with 50kgs of chemical gel for (mixture of sulphate, Silica, Alumina, Iron Oxide, Titanium Oxide, Magnesium Oxide, Sodium Oxide, Zinc Oxide etc. ) Resitance lowering grounding Minerals. The loss on ignition by mass of the chemical compound should be tested and certified by any International accredited and BIS ( Bureau of Indian Standard) accredited laboratory. The Chemical earth electrode manufacturer shall be an ISO 9001:2008 & ISO 14001:2001 certified organization. The Testing laboratory should be ISO 14001 certified. The JK CHEMRODE shall be duly tested & certified by CPRI ( Central Power Research Institute) Govt. of India for a minimum short circuit current of 30 KA rms. The Chemical Earth electrode manufacturer shall be an ISO 9001:2008 & ISO 14001:2004 certified organisation. along with Heavy duty polyplastic weather proof earth pit/ chamber.
20
-
-
... More
Electrical Panel board
-
-
-
... More
Design, Fabrication, Supplying, testing & commissioning of front operated cubicle type compartmentalized, front access free standing, dust and vermin proof (IP 54) panel board of 1750x 1550x 400 mm size suitable for use at 415 volt, 3 phase, 4 wire, 50 hertz system suitable for fault level of required value symmetrical at 415 volts, made out of 2mm thick CRCA MS sheet with hinged, gasketed (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/ T/ Flat/ sections including 3 mm thick gland plates on top and bottom and lifting hooks and GI earth strip of required size with 2 nos. earthing terminal and powder coated paint finish of approved shade over metal surface cleaned and treated with seven tank process complete with frame duly erection in ground and interconnection with copper conductor etc. as specification, as complete as required confirming to IS8623:93 as below.
[Note:- The panel should be IS 8623:93, IEC 61439 part-1 and II manufacturer has to produces the relevant test certificate as per IEC code for the same failing which panel shall be rejected) and CPRI Approved.]
-
-
-
... More
Incoming
(a) 400 amp, 4P, 36KA, 50HZ, 415V, AC MCCB with thermal magnetic based releases for O/C & S/C protection = 01 Nos.
Bus Bar Electrolytic high conductivity aluminium, three phase and neutral busbars rated at 630 amps having a maximum current density of 120 A/sq cm suitable to with stand symmetrical fault level of 35 kA. at 415 Volts. The Neutral busbar is to be of 100% capacity. Outgoing
(a) 250 amps, 4P, 36KA, 50HZ, 415V, AC MCCB with thermal magnetic based releases for O/C & S/C protection = 01 Nos.
(b) 125 amps, 4P, 36KA, 50HZ, 415V, AC MCCB with thermal magnetic based releases for O/C & S/C protection = 04 Nos.
(c) 63 amps, 4P, 36KA, 50HZ, 415V, AC MCCB with thermal magnetic based releases for O/C & S/C protection = 04Nos.
(d) Earthing studs 2 Nos
(e) Danger plate – 01 Nos Metering
(a) Digital Ammeter - 01 Nos with accuracy class 1.0
(b) Digital Voltmeter - 01 Nos with accuracy class 1.0 (c) RYB indicating lamp (d) Suitable CT's
(e) Rotatory handle in each switch
10
-
-
... More
Design, Fabrication, Supplying, testing & commissioning of front operated cubicle type compartmentalized, front access free standing, dust and vermin proof (IP 54) panel board of 1650x 1200x 400 mm size suitable for use at 415 volt, 3 phase, 4 wire, 50 hertz system suitable for fault level of required value symmetrical at 415 volts, made out of 2mm thick CRCA MS sheet with hinged, gasketed (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/ T/ Flat/ sections including 3 mm thick gland plates on top and bottom and lifting hooks and GI earth strip of required size with 2 nos. earthing terminal and powder coated paint finish of approved shade over metal surface cleaned and treated with seven tank process complete with frame duly erection in ground and interconnection with copper conductor etc. as specification, as complete as required confirming to IS8623:93 as below. [Note:- The panel should be IS 8623:93, IEC 61439 part-1 and II manufacturer has to produces the relevant test certificate as per IEC code for the same failing which panel shall be rejected) and CPRI Approved.]
-
-
-
... More
Incoming
(a) 250 amp, 4P, 36KA, 50HZ, 415V, AC MCCB with thermal magnetic based releases for O/C & S/C protection = 01 Nos.
Bus Bar Electrolytic high conductivity aluminium, three phase and neutral busbars rated at 400 amps having a maximum current density of 120 A/sq cm suitable to with stand symmetrical fault level of 35 kA. at 415 Volts. The Neutral busbar is to be of 100% capacity. Outgoing
(a) 160 amps, 4P, 36KA, 50HZ, 415V, AC MCCB with thermal magnetic based releases for O/C & S/C protection = 01 Nos.
(b) 125 amps, 4P, 36KA, 50HZ, 415V, AC MCCB with thermal magnetic based releases for O/C & S/C protection = 02 Nos.
(c) 63 amps, 4P, 36KA, 50HZ, 415V, AC MCCB with thermal magnetic based releases for O/C & S/C protection = 04Nos.
(d) Earthing studs 2 Nos
(e) Danger plate – 01 Nos Metering
(a) Digital Ammeter - 01 Nos with accuracy class 1.0
(b) Digital Voltmeter - 01 Nos with accuracy class 1.0 (c) RYB indicating lamp (d) Suitable CT's
(e) Rotatory handle in each switch
10
-
-
... More
Supplying and laying of PVC innersheathed, XLPE insulated copper conductor armored cable of Following size, 1.1 KV grade, in the existing RCC/ HUME/ METAL pipe as required. [conforming to I.S-7098(Part 1) 1988.
-
-
-
... More
4 X 16 sq. mm
200
-
-
... More
4 X 25 sq. mm
200
-
-
... More
4 X 35 sq. mm
100
-
-
... More
Supplying and laying of PVC innersheathed, XLPE insulated copper conductor armored cable of Following size, 1.1 KV grade, on wall surface as required.Upto 35 sq. mm (clamped with 1 mm thick saddle) [conforming to I.S-7098(Part 1) 1988.
-
-
-
... More
4 X 16 sq. mm
500
-
-
... More
4 X 35 sq. mm
550
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%