India Trade Promotion Organisation Tender

Providing International Hangars Hard Pressed extruded aluminum structure make of Roder / Loser berger or IIT certified Indian Hangar of Feb India or equivalent in the form similar to air craft hangar covered with high gloss PVC flame retardant sheet according to DIN 4102 B-1, M-2, BS 5438/7837: USA NFPA 701 or equivalent with hot dripped galvanized steel connections to DIN 50976 or equivalent and applied weight should be strong to sustain the high speed wind pressure, centre height 20 feet to 40 feet with various span from 20M to 50M. as per requirement with a provision of front and back covered with same material complete with aluminum glass entry & exit doors of size 5.00m wide and above and sufficient numbers at required location as per drawing including general lighting as per the direction of Engg.-in-charge (on hire basis for duration of fair) a) Span of 20Mtr to 50 Mtr

Providing false wooden flooring of 4” to 6” ht or as per site requirement from ground level and made with 19mm thick hard board and bed supported with providing 2”x2” wooden battens in properly leveled having no undulation, create no sound on using and joints should be in required level complete as per the direction of Engg-in-charge (on hire basis for duration of fair). a) Using good condition used board on top of floor

P/F 12 mm commercial ply wood of approved make preferably ISI make with nails/screws on existing wooden platform of hanger etc. complete and as per direction of Engineer In charge (On hire basis)