India Tourism Development Corporation Limited Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
India Tourism Development Corporation Limited - ITDC Tender
Eprocure
Opening Date1 Mar 2021
Closing Date17 Mar 2021
Tender AmountRefer Documents
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_ITDC_71678_1Bid Award Id
ViewTender No
ITDC/Engg/Kunnumpara/2021Tender Authority
India Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://http://itdc.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction of Tourist Facilitation Center, Open Air theatre, Entrance Gate, View Deck Point and Public Conveniences at Kunnumpara Temple, Kerala
Construction of Tourist Facilitation Center, Open Air theatre, Entrance Gate, View Deck Point and Public Conveniences at Kunnumpara Temple, Kerala
BOQ Items
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m.
176.49
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
668.77
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
668.77
-
-
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
1000
-
-
Concrete Works & solid block work
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement 4 coarse sand (zone-III) 8 graded stone aggregate 40mm nominal size) for foundation
29.32
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:- 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40mm nominal size)
71.51
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
62.16
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size
116.57
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size
197.92
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns etc. for mass concrete
177.58
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
664.22
-
-
Walls (any thickness) including attached pilasters, butteresses, Plinth and string courses etc.
116.5
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
221.94
-
-
Suspended floors, roofs, landings, shade balconies and access platform. with water proof ply 12 mm thick
1294.9
-
-
Edges of slabs and breaks in floors and walls Under 20 cm wide
317.42
-
-
Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
7461.18
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
23955.73
-
-
Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
94.82
-
-
PLASTERING
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
1645.9
-
-
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
1746.42
-
-
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
743
-
-
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections
792
-
-
Extra for plastering done on moulding, cornices or architraves including neat finish to line and level: In two coats
98
-
-
JOINERY
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
2.22
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately Second class teak wood 35 mm thick
23.52
-
-
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick
60.09
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
238
-
-
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 125x70x4 mm (ordinary type)
60
-
-
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 100x70x4 mm (ordinary type)
140
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm
28
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150 x10 mm for windows
140
-
-
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete
14
-
-
Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 250 mm weighing not less than 280 gms
140
-
-
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete
16
-
-
Providing and fixing bright finished brass hard drawn hooks and eye 250 mm with necessary screws, etc. complete.
140
-
-
Supplying and fixing Sliding wheels and channels , blades etc. for sliding door of basic rate of Rs. 1500.00/Each as per the instruction of Engineer in charge.
1
-
-
GRILL
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc
1177.37
-
-
FLOORING Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1cement : 4 coarse sand) : 25 mm thick
214.43
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
7.58
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
551.48
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
97.48
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigment etc., complete.
12.01
-
-
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
30.03
-
-
Wall cladding Providing and fixing 1st quality Laterite Stone wall cladding tiles of design, size & colour as approved by Engr.-in-Charge, in skirting risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete.
139.95
-
-
PAINTING
Providing and applying white cement based putty of average thickness 1mm,of approved brand & manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
3437.75
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
3437.75
-
-
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
448.77
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour Two coats
2987.15
-
-
Painting with oil type wood preservative of approved brand and manufacture : New work (two or more coats)
218.89
-
-
Melamine polishing on wood work (one or more coat).
218.89
-
-
Clear coat Painting on tile / stone wall cladding area with 2 clear coats of paint approved by Engr.-in-Charge including applying additional coats of paint wherever required, to colour, cost and conveyance of all materials and labour charges etc.
139.95
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters 80x1.25 mm M.S. laths with 1.25 mm thick top cover
7.42
-
-
Providing and fixing ball bearing for rolling shutters
8
-
-
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured)
4.37
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
424.21
-
-
Mangalore pattern tiles on RCC work Providing & fixing on roof pressed clay tile (Mangalore tile) of 20mm nominal thickness and of approved size and as per approved pattern on RCC slab / reapers with 20 mm thick average cement mortar 1:4 (1 cement : 4 coarse sand).
534.09
-
-
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on RCC slab with 20 mm thick average cement mortar 1:4 (1 cement : 4 coarse sand).
75
-
-
Providing and fixing bolts including nuts and washers complete.
3189.54
-
-
Mangalore pattern tiles on steel frame Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)
354
-
-
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately)
55
-
-
Water proofing
Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat ofself-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engg-in- charge.
743
-
-
SS top rail for ramp area Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
75
-
-
Supplying and fixing 12mm thick toughened glass with suitable GI frame work etc. as per the Architectural drawing, including cost and conveyance of all materials and labour charges, scaffolding charges etc. complete.
35
-
-
Anti-termite treatment Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos / Lindane emulsifiable concentrate of 20%
2041.17
-
-
Diluting and injecting chemical emulsion for Post constructional anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
120
-
-
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
500
-
-
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.
31.4
-
-
Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.
180
-
-
PLUMBING WORKS Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete.
1
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash Basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
1
-
-
Supplying and fixing Under counter Oval shape 560X470mm or nearest size wash hand basin, white glazed earthenware (Indian make best quality) counter sunk of basic rate of Rs. 900.00/Each including supplying and fixing brass waste coupling, pillar tap (Heavy, best quality) 1 no., 32mm PVC waste pipe and 15mm heavy duty PVC connection - 1 no 15mm CP Brass angle valve -1 no including cutting and making good the walls etc. complete as per directions of Engr.-in-Charge.
7
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen Sink without drain board 610x510 mm bowl depth 200 mm
4
-
-
Supplying and fixing CP brass health faucet with 8mm dia, 1.2 m long flexible tube and wall hook as per direction of Engr.-in-Charge.
1
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore
8
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
10
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15mm nominal bore
2
-
-
Providing and fixing square mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
3
-
-
Supplying and fixing multi floor trap with jalli 110 mm dia including cost of cutting and making floors & walls.
5
-
-
Providing and fixing PTMT grating of approved quality and colour Rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating
5
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) (a) 25 mm nominal bore
2
-
-
(b) 32 mm nominal bore.
2
-
-
(c ) 40 mm nominal bore.
2
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (a) 20 mm nominal outer dia Pipes
20
-
-
(b) 25mm nominal outer dia Pipes
20
-
-
(c ) 32 mm nominal outer dia Pipes
20
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work (a) 20 mm nominal inner dia Pipes
25
-
-
(b)25 mm nominal inner dia Pipes
20
-
-
(c)32 mm nominal inner dia Pipes
20
-
-
(d)40 mm nominal inner dia Pipes
20
-
-
(e)75 mm nominal inner dia Pipes
20
-
-
(f) 100 mm nominal inner dia Pipes
60
-
-
Constructing masonry Chamber 30x30x50 cm inside in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design . With common burnt clay F.P.S.(non-modular) bricks of class designation 7.5
3
-
-
Soakpit for waste water harvesting - Digging well of inner dia 90 cm and depth 3 m , supplying and erecting 90 cm ring solling with 40 mm metal and brick jelly for full depth , covering with 15 mm thick RCC cover slab etc., including cost and conveyance of all materials like steel, shuttering and all labour charges etc. complete.
1
-
-
P/f 18mm thick gang saw cut mirror polished pre-moulded and pre-polished machine cut for kitchen platforms vanity counters window sills facias and similar locations of required size approved shade colour and texture laid over 20mm thick base cement mortar 1:4 (1cement:4 coarse sand) joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab above 0.5sqm
48.33
-
-
Open AIR Theatre- Kunnumpara (Civil Work)Earth work excavation + Filing & Surface dressing Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
174.22
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Hard rock (Blasting prohibited)
138.9
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m.
170
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc complete
335.06
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
335.06
-
-
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
600
-
-
Random Rubble foundation &retaining wall Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand)
21.89
-
-
Concrete Works & solid block work
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement 4 coarse sand (zone-III) 8 graded stone aggregate 40mm nominal size) for foundation
3.86
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40mm nominal size)
69.15
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement:1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size
0.86
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size
1.45
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights: Lintels, beams, plinth beams, girders, bressumers and cantilevers
17.17
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
120.66
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
148.87
-
-
Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
32.57
-
-
PLASTERING
12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand)
267.66
-
-
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
980.89
-
-
PAINTING
Providing and applying white cement based putty of average thickness 1mm,of approved brand & manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
267.22
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
267.22
-
-
Finishing walls (Exterior walls ) with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Anti-termite treatment
267.22
-
-
SS Rail on parapet Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
415.09
-
-
Part:- F- Entrance Gate,Kunnumpara (Civil works) Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
3
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III): 8 graded stone aggregate 40mm nominal size)
1.37
-
-
Supplying and fixing entrance gate made of Krishna Shila Single stone with ornamental works as per drawing, Height of 6.52 Mtr, Base width is 68cm and Middle width is 56cm and top width of 77cm and design as per the detailed drawing, fixing the pillar with plain cement concrete (PCC will be paid separately) complete as per the instruction of Engineer in Charge
26.08
-
-
Clear coat Painting on Krishna Shila pillar with 2 coats clear coat Indigo paint of brand approved by Engr.-in-Charge including applying additional coats wherever required, to achieve even shade and colour,cost and conveyance of all materials and labour charges etc complete.
72.93
-
-
Public Convenience - 2no Earth work excavation + Filing & Surface dressing Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m. all kinds of soil.
33.26
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Hard rock (Blasting prohibited) .
13.88
-
-
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc.in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.
20
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc complete
11.52
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
11.52
-
-
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
60
-
-
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand)
48.64
-
-
Concrete Works & solid block work Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cemen 4 coarse sand (zone-III) 8 graded stone aggregate 40mm nominal size) .
6.54
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40mm nominal size) .
4.26
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement:1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size
2.52
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size
10.64
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :- (a) Lintels, beams,plinth beams, girders, bressumers and cantilevers
59.92
-
-
(b) Suspended floors, roofs, landings, shade balconies and access platform. with water proof ply 12 mm thick
73.52
-
-
Edges of slabs and breaks in floors and walls Under 20 cm wide
71.66
-
-
Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
252.36
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
926.26
-
-
Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) .
31.3
-
-
PLASTERING :- 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
47.3
-
-
Inside & Outside walls plastering 12 mm cement plaster of Mix :1:4 (1 cement: 4 coarse sand)
394.44
-
-
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections
150
-
-
JOINERY Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
0.78
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately Second class teak wood 35 mm thick
20.14
-
-
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick
3.68
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
148
-
-
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 125x70x4 mm (ordinary type).
56
-
-
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 100x70x4 mm (ordinary type) .
32
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm .
28
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150 x10 mm
32
-
-
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete
4
-
-
Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 250 mm weighing not less than 280 gms
32
-
-
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete
4
-
-
Providing and fixing bright finished brass hard drawn hooks and eye 250mm with necessary screws, etc. complete.
32
-
-
GRILL:- Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc
73.72
-
-
FLOORING :- Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
10.7
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
20.62
-
-
Providing and laying rectified glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete .
50.68
-
-
Providing and fixing Ist quality ceramic glazed wall tiles of size 30 cm x 60 cm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including grauting in white cement mixed with pigment of matching shade complete.
169.84
-
-
Wall cladding: Providing and fixing 1st quality Laterite stone wall cladding tiles of design, size & Colour as approved by Engr-in-charge, in skirting risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 Course Sand) and jointing with greay cement slurry @3.3 kg per sqm, including poining in while cement mixed with pigment of matching shade complete.
25.2
-
-
PAINTING Providing and applying white cement based putty of average thickness 1mm,of approved brand & manufacturer, over the plastered wall surface to prepare the surface even and smooth complete .
242.02
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
242.02
-
-
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
134.68
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour Two coats
107.34
-
-
Painting with oil type wood preservative of approved brand and manufacture : New work (two or more coats)
68.74
-
-
Melamine polishing on wood work (one or more coat).
68.74
-
-
Clear coat Painting on tile /stone wall front wall cladding area with 2 coats clear coat of paint approved by the Engg-in-charge, including applying additional coats , to achieve even shade and colour, cost and conveyance of all materials and labour charges etc.
25.2
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work .
131.46
-
-
Structural steel work Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
1133.16
-
-
Mangalore pattern tiles on steel frame Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately
113.32
-
-
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately)
36.12
-
-
Anti termite treatmant Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
641.84
-
-
Diluting and injecting chemical emulsion for Post constructional antitermite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 m m including excavation channel along the wall & rodding etc. complete:With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
46
-
-
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
150
-
-
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.
11.5
-
-
Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.
18
-
-
PLUMBING WORKS Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete
10
-
-
Supplying and fixing Under counter Oval shape 560X470mm or nearest size wash hand basin of white glazed earthenware (Indian make best quality) counter sunk of basic rate of 900 /each including supplying and fixing brass waste coupling, pillar tap (Heavy, best quality) 1 no., 32mm PVC waste pipe and 15mm heavy duty PVC connection - 1 no 15mm CP Brass angle valve -1 no including cutting and making good the walls etc. complete as per direction of Engr-in-charge.
6
-
-
Supplying and fixing CP Brass health faucet of 8mm dia,1.2 m long flexible tube and wall hook as per directions of Engg-in- charge.
10
-
-
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
6
-
-
Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore,80 mm long,42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms
6
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore
10
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
10
-
-
Providing and fixing squaremouth S.W.gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I.cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
4
-
-
Supplying and fixing multi floor trap with jalli 110 mm dai including cost of cutting and making good floors & walls.
16
-
-
Providing and fixing PTMT grating of approved quality and colour Rectangular type with openable circular lid
16
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) (a) 25 mm nominal bore
2
-
-
(b) 20 mm nominal bore
2
-
-
(c )32 mm nominal bore.
2
-
-
(d) 40 mm nominal bore.
2
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
(a) 20 mm nominal outer dia Pipes
40
-
-
(b)25 mm nominal outer dia Pipes
30
-
-
(c)32 mm nominal outer dia Pipes
30
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work (a) 20 mm nominal inner dia Pipes
30
-
-
(b) 25 mm nominal inner dia Pipes
30
-
-
(c )32 mm nominal inner dia Pipes
20
-
-
( d)40 mm nominal inner dia Pipes
20
-
-
( e)75 mm nominal inner dia Pipes
20
-
-
( f)100 mm nominal inner dia Pipes
50
-
-
Constructing masonry Chamber 30x30x50 cm inside in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 Mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
-
-
Soakpit for waste water harvesting - Digging well of inner dia 90 cm and depth 3 m , supplying and erecting 90 cm ring , solling with 40 mm metal and brick jelly for full depth , covering with 15 mm thick rcc cover slab etc , including cost and conveyance of all materials like steel , shuttering and all labour charges etc compelete.
2
-
-
Septic tank - Constructing RCC septic tank of capacity 10500 Ltrs ( inner Size 3.44 x1.94 x 1.50m with RCC cover slab including earthwork in excavation PCC 1:5:10 15 cm thick for foundation , 150mm thick sand filling,Reinforced cement concrete 1:1.5:3 for base slab of thick 20 cm & cover slab 15 cm thick , Brick wall of thick 23cm in cement mortar 1:4 , inner wall plasteing with cement mortar 1:3 12 mm thick finished with a floating coat of neat cement complete as per standard design/drawings including , cost and conveyance of all materials and labour charges etc and directions Engg-in charge.
2
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
40000
-
-
VIEWING DECK (Earth work excavation +Filling &Surface dressing) Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m. All kinds of soil
11.09
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Hard rock (Blasting prohibited) .
14.87
-
-
Inserting 16mm dia Anchor bar in to the hard rock up to a depth of 45cm on both ways etc. complete as per direction of Engr-in-charge.
70
-
-
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc.in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.
10
-
-
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
55
-
-
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand)
9.45
-
-
Concrete Works & solid block work Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement :4 coarse sand (zone-III) 8 graded stone aggregate 40mm nominal size) .
2.77
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
2.11
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size
0.57
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size
13.81
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : (a) Foundations,footings, bases of columns etc. for mass concrete
10.8
-
-
(b)Lintels, beams, plinth beams, girders, bressumers and cantilevers
39.33
-
-
(c)Columns, Pillars, Piers, Abutments, Posts and Struts
10.26
-
-
Suspended floors, roofs, landings, shade balconies and access platform. with water proof ply 12 mm thick
51
-
-
Edges of slabs and breaks in floors and walls Under 20 cm wide
20
-
-
Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
169.4
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
1288.7
-
-
Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) . For 20 cm & 10 cm thick
0.68
-
-
PLASTERING :- Inside & Outside walls plastering 12mm cement plaster of Mix:- 1:4 (1 cement: 4 fine sand)
3
-
-
FLOORING Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1cement : 4 coarse sand) : 25 mm thick
51
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.For steps
2.93
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
8
-
-
PAINTING : Providing and applying white cement based putty of average thickness 1mm,of approved brand & manufacturer, over the plastered wall surface to prepare the surface even and smooth complete .
3
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content or inside wall ,outside wall & ceiling With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
3
-
-
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm
3
-
-
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railling and similar works , including applying priming coat of approved steel primer. GI Pipe
592
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
23.19
-
-
(E&M Work) TFC Kunnupara Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group- C
150
-
-
Twin control point wiring in PVC conduit ,with modular type switch:Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, 2 way modular switch,modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
2
-
-
Group control point wiring in PVC conduit : Wiring for group controlled (looped) light point/fan point/exhaustfan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
85
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed Medium class pvc conduit conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
200
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
150
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
100
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
50
-
-
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
50
-
-
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
50
-
-
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
40
-
-
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
35
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
20
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing type 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch, connection, painting etc.as required. (For raw power outlets)
20
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6amps modular socket outlet (3 module type) and 15/16 amps modular switch, connection, painting etc.as required.
15
-
-
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
35
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/ 6 A modular switch, connections etc. as required.
5
-
-
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required.
5
-
-
Supply,fixing and wiring of 25 A modular switch socket .grade PVC conduit concealed in ceiling,or floor,or wall,or column including fixing of 20 A DP modular switch and covered with modular switch plate interconnections, supply of fixing materials, complete as required.
15
-
-
Supplying and fixing of following sizes of medium gauge PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
2500
-
-
25 mm
250
-
-
32 mm
75
-
-
SF SP/TP MCB DB's & VDB's : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
12 way, Double door (ups db)
1
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
4 way (space for incomer RCCB + Isolator+ 12), Double door
2
-
-
6 way (space for incomer RCCB + Isolator+ 18), Double Door
2
-
-
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.
-
-
-
4 way (space for incomer RCCB + Isolator+ 18), Double Door
2
-
-
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 250 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs as required.
-
-
-
8 way (space for incomer MCCB + 24), Double Door
1
-
-
Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
6- 32A Single pole
94
-
-
6-32A Triple pole
2
-
-
40Amps/63A triple pole
6
-
-
DPX3 MCCB with thermanl magnetic protection unit 125A 25kA 4P
1
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
10
-
-
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40Amps
10
-
-
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40Amps
4
-
-
63Amps
2
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 amps
2
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in sheet steel enclosure, on surface or in recess, with chained cover for the socket out let and complete with connections, testing and commissioning etc. as required.
-
-
-
40 amps
2
-
-
Supplying and fixing 32 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth (3P+N+E), metal enclosed plug top alongwith 25 A "C" curve, TPN MCB, in sheet steel enclosure, on surface or in recess, with chained cover for the socket out let and complete with connections, testing and commissioning etc. as required.
5
-
-
Supply and installation of DIN Rail Surge Protection Device (4+0) in suitable enclosure Class B + Class C/ Type 1 + Class 2 Tested as per IEC 61643 Part 11:2016. Nominal voltage -230V 50/60Hz, MCOV of 275 V , Total Impulse current-50 KA (10/350~ sec) & Total Max Discharge current 260KA (8/20~sec), Voltage protection level 1.5 kV & Residual Voltage @5 kA(8/20) 0.8kV. The Surge Protection Devices should have TOV safefail for 120 Min : 442 V and with out Follow Current & Leakage Current. Protective Elements are High Energy MOV & GDT & the Protection Modes for: L & N to PE. Short- Circuit Current rating (Isccr) - 50 kA/50 Hz . Back up fuse required more than 315AgG/ gL. Health Status Indication required in all cartridge. Total Response time 25 nano sec.(VDB INCOMER)
1
-
-
Internal Light Fitting and Fans: Supply, installation, testing and commissioning of following surface/ recess mounting type LED light fittings complete with all accessories and lamp etc. directly on the ceiling/wall ( All ceiling mounted fittings shall be fixed with 2 Nos anchor fasteners. (Extra chain shall be provided for suspension of recess fittings) including connections using 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as required.
-
-
-
12 W down light Recess (Cafeteria,lobby& rooms)
50
-
-
12 W down light Surface (Stair)
3
-
-
4 FT LED Batten
50
-
-
6 W down light Recess (Toilet)
23
-
-
Supplying Installation,testing & commissioning of 1200mm sweep (White) 5 star rated ceiling fan without regulator including wiring the down rod of std.length ( upto 30cms) with 1.5 Sqmm PVC insulated copper conductor, single core cable etc as required.
35
-
-
Supplying Installation,testing & commissioning of 100mm sweep (White) ceiling Exhaust fan
8
-
-
Supplying and fixing extra down rod of 10 cm length G.I. pipe,15 mm dia, heavy gauge including painting etc. as required. (Note:More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
20
-
-
4 Core AL. Conductor 25 sq.mm. Al. Armoured XLPE insulated cable
25
-
-
4 Core AL. Conducto 16 sq.mm. AL. Armoured XLPE insulated cable
10
-
-
4 Core AL. Conducto 10 sq.mm. Al. Armoured XLPE insulated cable
15
-
-
3.5 Core AL. Conductor 95 sq.mm. Al Armoured Armoured XLPE insulated cable
50
-
-
3 Core AL Conductor 10 sq.mm. Al Armoured XLPE insulated cable
30
-
-
Laying and fixing of one number PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 kV grade of following size on cable tray as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
80
-
-
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
50
-
-
Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
2/3/3.5/4 CORES AL. CABLE WITH AL. LUGS
-
-
-
3C X 10 sq. mm (22mm)
4
-
-
4C X 10 sq. mm (25mm)
2
-
-
4C X 16 sq. mm (28mm)
2
-
-
4C X 25 sq. mm (28mm)
2
-
-
3½ C X 95 sq. mm (35mm)
2
-
-
Earthing: PIPE ELECTRODE EARTHING STATIONS Earthing with G.I. earth pipe 4.5 meter long,40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/cock and salt as required.
2
-
-
Earthing Conductors
-
-
-
Supplying, straightening, shaping, laying under ground / laying on a cable tray / laying in cement concrete trench the following sizes of copper/hot dipped galvanized iron conductor. The work is inclusive of providing clamping with the trays / on the sides of the trenches, making joints whereever required and providing the hardwares and the terminating the hardwares and the termination to the equipment / earthing station / etc.
-
-
-
Copper Conductors
-
-
-
No. 10 SWG Cu
150
-
-
No. 8 SWG Cu
50
-
-
KUNNUPARA TEMPLE (OAT )
-
-
-
(INTERNAL ELECTRICAL INTSTALLTIONS & WIRING) : Point wiring in PVC conduit with modular type switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
4
-
-
Twin control point wiring in PVC conduit ,with modular type switch:Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, 2 way modular switch,modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
1
-
-
Group control point wiring in PVC conduit : Wiring for group controlled (looped) light point/fan point/exhaustfan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
1
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed Medium class pvc conduit conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
25
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
30
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
5
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
5
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing type 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch, connection, painting etc.as required. (For raw power outlets)
1
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6amps modular socket outlet (3 module type) and 15/16 amps modular switch, connection, painting etc.as required.
2
-
-
Supplying and fixing of following sizes of medium gauge PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
70
-
-
25 mm
25
-
-
32 mm
15
-
-
SF SP/TP MCB DB's & VDB's Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
4 way (space for incomer RCCB + Isolator+ 12), Double door
1
-
-
Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
6- 32A Single pole
4
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
5
-
-
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40Amps
1
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 amps
1
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in sheet steel enclosure, on surface or in recess, with chained cover for the socket out let and complete with connections, testing and commissioning etc. as required.
-
-
-
40 amps
1
-
-
SITC of Step light 2.5 W Compact, robust and non-corrosive aluminium body with high lumen output LEDs that enhances the safety and architectural design of step and entrance areas
10
-
-
4 CORES AL. CONDUCTOR.10 sq.mm. Al. Armoured XLPE insulated cable
35
-
-
3 CORES AL. CONDUCTOR 10 sq.mm. Al Armoured XLPE insulated cable
55
-
-
Laying and fixing of one number PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 kV grade of following size on cable tray as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
35
-
-
Cable Laying: Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
2/3/3.5/4 CORES AL. CABLE WITH AL. LUGS
-
-
-
3C X 10 sq. mm (22mm)
2
-
-
4C X 10 sq. mm (25mm)
2
-
-
Earthing : PIPE ELECTRODE EARTHING STATIONS Earthing with G.I. earth pipe 4.5 meter long,40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/cock and salt as required.
2
-
-
Earthing Conductors: Supplying, straightening, shaping, laying under ground / laying on a cable tray / laying in cement concrete trench the following sizes of copper/hot dipped galvanized iron conductor. The work is inclusive of providing clamping with the trays / on the sides of the trenches, making joints whereever required and providing the hardwares and the terminating the hardwares and the termination to the equipment / earthing station / etc.
-
-
-
Copper Conductors: No. 6 SWG CU
65
-
-
KUNNUPARA PUBLIC CONVENIENCE
(INTERNAL ELECTRICAL INTSTALLTIONS & WIRING) Point wiring in PVC conduit with modular type switch:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
35
-
-
Group control point wiring in PVC conduit : Wiring for group controlled (looped) light point/fan point/exhaustfan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
4
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed Medium class pvc conduit conduit as required.
-
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
65
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
35
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing type 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch, connection, painting etc.as required. (For raw power outlets)
12
-
-
Supplying and fixing of following sizes of medium gauge PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
65
-
-
SF SP /TP MCB DB's & VDB's Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
12 way, Double door (ups db)
1
-
-
Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
6- 32A Single pole
6
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
5
-
-
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40Amps
1
-
-
Supplying and fixing following rating, Two pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 amps
1
-
-
INTERNAL LIGHT FITTINGS AND FANS: Supply, installation, testing and commissioning of following surface/ recess mounting type LED light fittings complete with all accessories and lamp etc. directly on the ceiling/wall ( All ceiling mounted fittings shall be fixed with 2 Nos anchor fasteners. (Extra chain shall be provided for suspension of recess fittings) including connections using 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as required.
-
-
-
6 W down light Recess (Toilet)
22
-
-
Supplying Installation,testing & commissioning of 100mm sweep (White) ceiling Exhaust fan
7
-
-
PIPE ELECTRODE EARTHING STATIONS: Earthing with G.I. earth pipe 4.5 meter long,40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/cock and salt as required.
1
-
-
EARTHING CONDUCTORS : Supplying, straightening, shaping, laying under ground / laying on a cable tray / laying in cement concrete trench the following sizes of copper/hot dipped galvanized iron conductor. The work is inclusive of providing clamping with the trays / on the sides of the trenches, making joints whereever required and providing the hardwares and the terminating the hardwares and the termination to the equipment / earthing station / etc.
-
-
-
COPPER CONDUCTORS No. 6 SWG Cu
14
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements