Guru Gobind Singh Indraprastha University Tender

Designing, Manufacturing & Installation of 3D Letters Signage at all heights and locations Letters made up of Stainless steel, grade IS 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fastener of approved make Depth of letter 50mm and wall thickness 1.5mm, all complete as per architectural drawings and direction of Engineer in charge. University School of Design and Innovation (Block-B) (30cm letters height)

Designing, Manufacturing & Installation of 3D Letters Signage at all heights and locations Letters made up of Stainless steel, grade IS 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fastener of approved make Depth of letter 50mm and wall thickness 1.5mm, all complete as per architectural drawings and direction of Engineer in charge. Central Library (Block-C) (30cm letters height)

Designing, Manufacturing & Installation of 3D Letters Signage at all heights and locations Letters made up of Stainless steel, grade IS 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fastener of approved make Depth of letter 50mm and wall thickness 1.5mm, all complete as per architectural drawings and direction of Engineer in charge. Administrative Block (Block-D) (30cm letters height)

Designing, Manufacturing & Installation of 3D Letters Signage at all heights and locations Letters made up of Stainless steel, grade IS 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fastener of approved make Depth of letter 50mm and wall thickness 1.5mm, all complete as per architectural drawings and direction of Engineer in charge. Auditorium (Block-E) (30cm letters height)

Designing, Manufacturing & Installation of 3D Letters Signage at all heights and locations Letters made up of Stainless steel, grade IS 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fastener of approved make Depth of letter 50mm and wall thickness 1.5mm, all complete as per architectural drawings and direction of Engineer in charge. Sports Hall (Block-G) (30cm letters height)

Designing, Manufacturing & Installation of 3D Letters Signage at all heights and locations Letters made up of Stainless steel, grade IS 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fastener of approved make Depth of letter 50mm and wall thickness 1.5mm, all complete as per architectural drawings and direction of Engineer in charge. Boys Hostel (Block-H) (30cm letters height)

Designing, Manufacturing & Installation of 3D Letters Signage at all heights and locations Letters made up of Stainless steel, grade IS 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fastener of approved make Depth of letter 50mm and wall thickness 1.5mm, all complete as per architectural drawings and direction of Engineer in charge. Teacher's Hostel (Block-I) (30cm letters height)

Designing, Manufacturing & Installation of 3D Letters Signage at all heights and locations Letters made up of Stainless steel, grade IS 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fastener of approved make Depth of letter 50mm and wall thickness 1.5mm, all complete as per architectural drawings and direction of Engineer in charge. Girls Hostel (Block-J) (30cm letters height)

Designing, Manufacturing & Installation of 3D Letters Signage at all heights and locations Letters made up of Stainless steel, grade IS 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fastener of approved make Depth of letter 50mm and wall thickness 1.5mm, all complete as per architectural drawings and direction of Engineer in charge. Type-V (two blocks) (30cm letters height)

Designing, Manufacturing & Installation of 3D Letters Signage at all heights and locations Letters made up of Stainless steel, grade IS 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fastener of approved make Depth of letter 50mm and wall thickness 1.5mm, all complete as per architectural drawings and direction of Engineer in charge. Type-IV (two blocks) (30cm letters height)

Designing, Manufacturing & Installation of 3D Letters Signage at all heights and locations Letters made up of Stainless steel, grade IS 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fastener of approved make Depth of letter 50mm and wall thickness 1.5mm, all complete as per architectural drawings and direction of Engineer in charge. Type- III (one block) (30cm letters height)

Designing, Manufacturing & Installation of 3D Letters Signage at all heights and locations Letters made up of Stainless steel, grade IS 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fastener of approved make Depth of letter 50mm and wall thickness 1.5mm, all complete as per architectural drawings and direction of Engineer in charge. Type-II (one block) (30cm letters height)

Designing, Manufacturing & Installation of Pylon made out of stainless steel as per IS 316 grade with 2mm thickness satin finish area specially text and graphic signages. The text and graphics finished with deep engraved by laser silk screen photo process duly filled colour in furnish powder coating of approved shed, sheet to be duly jointless mounting on stainless steel heavy frame work in the grade of IS 304 including 10mm thick stainless steel base plate fixing with M-20 concreat mixture grouting with 6nos. or as per required of GI down bolts fastener, the Pylon should be fixed in the dimention of foundation is L-750xW-200xD- 450mm as per directed by the engineer-in-charge. All the Pylon should be Both side visible i.e. text, artwork, logo and matter at all location. Campus Map (1800x1800x100mm)

Designing, Manufacturing & Installation of Pylon made out of stainless steel as per IS 316 grade with 2mm thickness satin finish area specially text and graphic signages. The text and graphics finished with deep engraved by laser silk screen photo process duly filled colour in furnish powder coating of approved shed, sheet to be duly jointless mounting on stainless steel heavy frame work in the grade of IS 304 including 10mm thick stainless steel base plate fixing with M-20 concreat mixture grouting with 6nos. or as per required of GI down bolts fastener, the Pylon should be fixed in the dimention of foundation is L-750xW-200xD- 450mm as per directed by the engineer-in-charge. All the Pylon should be Both side visible i.e. text, artwork, logo and matter at all location. Directional Directories (1840x510x100mm)

Designing, Manufacturing & Installation of Pylon made out of stainless steel as per IS 316 grade with 2mm thickness satin finish area specially text and graphic signages. The text and graphics finished with deep engraved by laser silk screen photo process duly filled colour in furnish powder coating of approved shed, sheet to be duly jointless mounting on stainless steel heavy frame work in the grade of IS 304 including 10mm thick stainless steel base plate fixing with M-20 concreat mixture grouting with 6nos. or as per required of GI down bolts fastener, the Pylon should be fixed in the dimention of foundation is L-750xW-200xD- 450mm as per directed by the engineer-in-charge. All the Pylon should be Both side visible i.e. text, artwork, logo and matter at all location. Traffic Advisory (1840x400x100mm)

Designing, Manufacturing & Installation of Pylon made out of stainless steel as per IS 316 grade with 2mm thickness satin finish area specially text and graphic signages. The text and graphics finished with deep engraved by laser silk screen photo process duly filled colour in furnish powder coating of approved shed, sheet to be duly jointless mounting on stainless steel heavy frame work in the grade of IS 304 including 10mm thick stainless steel base plate fixing with M-20 concreat mixture grouting with 6nos. or as per required of GI down bolts fastener, the Pylon should be fixed in the dimention of foundation is L-750xW-200xD- 450mm as per directed by the engineer-in-charge. All the Pylon should be Both side visible i.e. text, artwork, logo and matter at all location. Building Identification (1840x510x100mm)

Designing, Manufacturing & Installation of Pylon made out of stainless steel as per IS 316 grade with 2mm thickness satin finish area specially text and graphic signages. The text and graphics finished with deep engraved by laser silk screen photo process duly filled colour in furnish powder coating of approved shed, sheet to be duly jointless mounting on stainless steel heavy frame work in the grade of IS 304 including 10mm thick stainless steel base plate fixing with M-20 concreat mixture grouting with 6nos. or as per required of GI down bolts fastener, the Pylon should be fixed in the dimention of foundation is L-750xW-200xD- 450mm as per directed by the engineer-in-charge. All the Pylon should be Both side visible i.e. text, artwork, logo and matter at all location. General Instruction (1840x510x100mm)

Designing, Manufacturing & Installation of Pylon made out of stainless steel as per IS 316 grade with 2mm thickness satin finish area specially text and graphic signages. The text and graphics finished with deep engraved by laser silk screen photo process duly filled colour in furnish powder coating of approved shed, sheet to be duly jointless mounting on stainless steel heavy frame work in the grade of IS 304 including 10mm thick stainless steel base plate fixing with M-20 concreat mixture grouting with 6nos. or as per required of GI down bolts fastener, the Pylon should be fixed in the dimention of foundation is L-750xW-200xD- 450mm as per directed by the engineer-in-charge. All the Pylon should be Both side visible i.e. text, artwork, logo and matter at all location. Assembly Point (2400x400x100mm)

Designing, Manufacturing & Installation of 3D Reception Logo Branding at Reception made up of Stainless steel, grade IS 316 grade of approved make. The text and graphics finished with deep engraved by laser silk screen photo process duly filled colour in furnish powder coating of approved shed laser cut shape in required design, language & font, with 50mm side raising including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fast of approved make, all complete as per architectural drawings and direction of Engineer in charge. Reception Logo (900x900mm Dia)

Designing, Manufacturing & Installation of internal Signages made out of 8mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, writting/artwork alphabets arrow symbol and text should be in 3mm thick inserted/grouted in base front facia should be leveld in ornamental finish with using of superior quality chemical tape make 3M, all complete as per architectural drawings and direction of Engineer in charge. Room Nos. (200x125mm)

Designing, Manufacturing & Installation of internal Signages made out of 8mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, writting/artwork alphabets arrow symbol and text should be in 3mm thick inserted/grouted in base front facia should be leveld in ornamental finish with using of superior quality chemical tape make 3M, all complete as per architectural drawings and direction of Engineer in charge. Room Identification (600x150mm)

Designing, Manufacturing & Installation of internal Signages made out of 8mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, writting/artwork alphabets arrow symbol and text should be in 3mm thick inserted/grouted in base front facia should be leveld in ornamental finish with using of superior quality chemical tape make 3M, all complete as per architectural drawings and direction of Engineer in charge. Department Identification (600x150mm)

Designing, Manufacturing & Installation of internal Signages made out of 8mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, writting/artwork alphabets arrow symbol and text should be in 3mm thick inserted/grouted in base front facia should be leveld in ornamental finish with using of superior quality chemical tape make 3M, all complete as per architectural drawings and direction of Engineer in charge. Restroom Identification (Male) (250x375mm)

Designing, Manufacturing & Installation of internal Signages made out of 8mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, writting/artwork alphabets arrow symbol and text should be in 3mm thick inserted/grouted in base front facia should be leveld in ornamental finish with using of superior quality chemical tape make 3M, all complete as per architectural drawings and direction of Engineer in charge. Restroom Identification (Female) (250x375mm)

Designing, Manufacturing & Installation of internal Signages made out of 8mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, writting/artwork alphabets arrow symbol and text should be in 3mm thick inserted/grouted in base front facia should be leveld in ornamental finish with using of superior quality chemical tape make 3M, all complete as per architectural drawings and direction of Engineer in charge. Restroom Identification (Spl. Abled) (250x375mm)

Designing, Manufacturing & Installation of internal Signages made out of 8mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, writting/artwork alphabets arrow symbol and text should be in 3mm thick inserted/grouted in base front facia should be leveld in ornamental finish with using of superior quality chemical tape make 3M, all complete as per architectural drawings and direction of Engineer in charge. Drinking Water (250x375mm)

Designing, Manufacturing & Installation of internal Signages made out of 8mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, writting/artwork alphabets arrow symbol and text should be in 3mm thick inserted/grouted in base front facia should be leveld in ornamental finish with using of superior quality chemical tape make 3M, all complete as per architectural drawings and direction of Engineer in charge. Push and Pull (75x150mm)

Designing, Manufacturing & Installation of internal Signages made out of 8mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, writting/artwork alphabets arrow symbol and text should be in 3mm thick inserted/grouted in base front facia should be leveld in ornamental finish with using of superior quality chemical tape make 3M, all complete as per architectural drawings and direction of Engineer in charge. Floor Level (600x600mm)

Designing, Manufacturing & Installation of internal Signages made out of 8mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, writting/artwork alphabets arrow symbol and text should be in 3mm thick inserted/grouted in base front facia should be leveld in ornamental finish with using of superior quality chemical tape make 3M, all complete as per architectural drawings and direction of Engineer in charge. Floor Directory (900x1000mm)

Designing, Manufacturing & Installation of internal Signages made out of 8mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, writting/artwork alphabets arrow symbol and text should be in 3mm thick inserted/grouted in base front facia should be leveld in ornamental finish with using of superior quality chemical tape make 3M, all complete as per architectural drawings and direction of Engineer in charge. Ceiling Hung Direction (Both side visible) (1200x300mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Lift No. (450x150mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. No Smoking (600x300mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. You are under CCTV Surveillance (600x300mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Swatcch Bharat Mission (600x300mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Danger, Caution, Prohibited (450x450mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Service area identification (900x300mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Fire Exit Door Mounted (300x300mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Fire Exit Direction Suspended /Wall (450x150mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Evacuation Map (750x600mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Fire Extinguisher (600x300mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Fire Hose Reel (200x250mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Fire Alarm (200x250mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Lift Disclaimer (300x450mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Fire Exit Illumination (300x150mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Basement Signage (Car Parking Directionl) Both Side visible (2400x400mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Basement Signage (Safety Zebra) (1200x300mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Lift Lobby/ Staircase (600x300mm)

Providing, Manufacturing & Installation at all levels and locations, informatory/directional/warning signages in required font, design, pattern and size made of 4 mm thick odourless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color,of approved quality and make, with having self adhesive luminiscent vinyl sheet ( film thickness 150 micron, luminiscent duration 6-8 hours) of make 3M/ Avery or approved equivalent over which the signage/letter cuttout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. Fire Exit (750x300)