Guru Gobind Singh Indraprastha University Tender

Provioding and fixing S/S floor spring of high standard and quality of OZONE make or equivalent.

Providing and fixing S/S handle of high standard quality 600mm long of OZONE or equivalent.

Providing and fixing teak wood railing for witness box of hight 0.90 m consisting of old teak wood section 60 mmx 50 mm two horizontal members one at the top and one at bottom connecting with decorative posts 12 nos. of section of 60 mm x 60 mm and for decorative poll at corner heavier then previous with 4 nos. spehere mounted at all corner complete in all respect.

Providing and fixing first class wood railing height 1.15 consisting of three horizontal member section 60 x 100 mm, 60 x 60 mm & 60 mmx 60 mm with decorativepost connecting to 6 cm x 10 cm to 6 cm x 6 cm member of spacing centre to centre 35 cm and decorative post connecting 6 cm x 6 cm & 6 cm x 6 cm horizontal member finishing complete in all respect as per attached drawing and picture.

Supply and fixing roller blinds for existing window opening of of various sizes fo approved shade and colour with aluminum alloy head rail powder coated channel and oil repellent washable fabric including spares like chain, rollers, steel weight, dori etc. fixing to walls with stainless steel screws all complete including labour and material as per directions by Engineer- in- charge.(NEHA Touch/VISTA or equivalent make.)

Providing and fixing S/S handle size 150mm to cupboard of ozone or equivalent make.

Providing and placing in position back storage 750mm ht. and 450 mm depth made of 18mm/19mm. Commercial board with decorative laminate of 1.00 mm thick, back covered with 6mm commercial ply with provision of self closing spring 12 nos, S/S tower bolt- 2 nos, S/S handle 150 mm 4 nos , one detachable shelf in middle and magnetic catcher at each shutter finished with 2mm thick bending tape complete in all respect, as per the direction of the engineer in charge and the drawing enclosed for reference (Design for storage size (1650*750*450) ( Length of storage shall be measured for payment purpose.)

Providing and fixing18 mm thick Ply with commrecil veenering on both the faces in cup board ,shelves ,side tables , panneling , flooring ,etc. complete as per direction of Engineer incharge. (a) 18 mm thick Green ply, Century ply, Archid Ply, Kitply, Duruply.

Providing and fixing 12 mm thick Ply with commercial veenering on both the faces in cup board ,shelves ,side tables ,panelling ,flooring ,complete as per direction of Engineer in charge.(a) 12 mm thick Green ply, Century ply, Archid ply, Kitply, Duru ply.

Providing and fixing 4 mm thick with dcommerical veenering on both the face in cupboard , shelves, side tables, panelling, flooring. Complete as per direction of engineer-in- charge. (a) 4 mm thick greenply, centuryply, archid ply, kitply.

Providing, fixing and installation of High Back Chair with following specifications of Hight Back Chair:‐ The seat & back is made up of 1.3cm thk. hot pressed plywood measuredof insert moulded Polyurethane Foam upholstered with foam laminated Leatherite . inner frame upholstered with mesh leatherite and mounted on the main assembly, back with lumbar support for achieving comfortable seating posture. Base: Black or silver nylon base with nylon castors. The chair should be fixed type with cusion leatherite padded handel. Chair should be of 360 degree swivel Posture Control with 3 way locking and synchro tilt mechanism and hydraulic gas lift gas lift to allows 90‐100 mm. of height , Seat width of 530‐550 mm Seat Height of 420‐510mm with hydraulic height adjustability of 90‐100mm. Sub assembly back size 550 ‐ 620 mm height. Effective back height from Seat ‐ 570mm, polyurethane foam for seat having density 65‐70 kg/m3. Pedestal made of nylon base fitted with 5 nos. twin wheel castors (castor wheel dia. 60‐70 cm), base pedestal dia 60‐70 mm and pitch center dia. 700‐720mm with castors, twin wheel castors injection moulded in Nylon etc. all complete as per manufacturers specification, approved sample and direction of Engineer‐in‐Charge.. The manufacturer shall have membership/ certification from ISO‐9001:2015, ISO‐ 14001:2015, OHSAS 18001:2007, ISO‐45001:2018, SO‐50001:2018, Green Guard & BIFMA. All the above items should be as per approved sample and specifications & direction of engineer‐in‐charg

Providing, fixing and installation ofMid Back Chair with following specifications : The seat & back is made up of 1.3cm thk. hot pressed plywoodmeasuredof insert moulded Polyurethane Foam upholstered with foam laminated Leatherite . inner frame upholstered with mesh leatherite and mounted on the main assembly, back with lumbar support for achieving comfortable seating posture.The chair should be fixed type with cusion leatherite padded handel. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK SIZE : 46.5 cm. (W) x 59.5 cm. (D), Visitor TUBULAR FRAME: The tubular frame should be cantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should be connected to frame through chrome plated high pressure die case connector piece. All metal components should be of MS CRCA of Tata Steel or Sail or Jindal Steel and pre treated with zinc phosphating in 8 tank process and then powder coated with epoxy polyster powder coating of Kansai Nerolac Paints or Asian Paints. powder coating/anodizing with anti‐rust surface treatment shall strictly comply with IS:13871 (1993) inclusive of method. Goods should be supplied in knocked down construction and should have low VOC emission. The manufacturer shall have membership/ certification from ISO‐9001:2015, ISO‐14001:2015, OHSAS 18001:2007, ISO‐45001:2018, SO‐50001:2018, Green Guard & BIFMA. All the above items should be as per approved sample and specifications & direction of engineer‐in‐charge.

Providing supplying and fixing auditorium Chair,Seat Construction: Seat construction PU padding with Structural Powder Coated crca frame as per IS :3074‐2005, fabric / leatherite Upholsteries with injection moulded seat and back Plastic covers. Equip each seat with basket below the seat for carrying books. PU padding with 3 Layer 100% Yarn Dyed fabric or leatherite Upholsteries with injection‐moulded seat and back Plastic covers. The outer seat cover shall have a good exterior surface and internal moulded reinforcing ribs for a solid warp‐free construction. Seat Cushioning to be Made by 45 +/‐ 3 Kg Density Polyurethane Foam shall be applied over the 7 Tank Powder coated Metal frame. Foam shall be fire retardan. The upholstery cover shall be sewn and fitted to the seat assembly with collapsible assembly rings and nylon tension cord. Arms fixed type with wooden on top. Back Construction: PU padding with Structural Powder Coated crca frame as per IS :3074‐2005, fabric /leatherite Upholsteries with injectionmoulded seat and back Plastic covers. PU padding with 3 Layer 100% Yarn Dyed fabric or leatherite Upholsteries with injection‐moulded seat and back Plastic covers.The outer seat cover shall have a good exterior surface and internal moulded reinforcing ribs for a solid warp‐free construction. Seat Cushioning to be Made by 45 +/‐ 3 Kg D ensity Polyurethane Foam shall be applied over the 7 Tank Powder coated Metal frame. Foam shall be fire retardan. The upholstery cover shall be sewn and fitted to the seat assembly with collapsible assembly rings and nylon tension cord. The manufacturer shall have membership/ certification from ISO‐9001:2015, ISO‐14001:2015, OHSAS 18001:2007, ISO‐45001:2018, SO‐50001:2018, Green Guard & BIFMA. All the above items should be as per approved sample and specifications & direction of engineer‐in‐charge.

Providing & Fixing wooden table of size 1200*600*750 mm made of 18 mm Ply covered with 1 mm thick laminate with one drawer unit on R.H.S as per approved design.

Providing & Fixing wooden Dias of size 600*600*1200mm made of 18mm ply covered with 1mm laminate as per approved design.

Providing and Fixing of click and lock virgin vinyl planks with four side patented locking system 5mm with 0.5mm wear layer ( commercial grade specification with 10-15 year product warranty) floor scores approved and CE certification,ECO label,100% recyclable and ISO 9001-2008 .(Vibrant Natura/- Poly flor/-, Mannigton )

Providing and Fixing Reducer/Corner and door profile matching with SPC tiles/Woven Vinyl floors etc. complete as per direction of engineer-in-charge.

CLADDING WORK Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with :Decorative veneer facings of approved manufacture

WOOD AND PVC WORK Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.Overall width 35 mm

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick

Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge.

Providing and fixing multipupose lock, as per the direction of the Engineer-in-Charge. complete in all respect

ROOFING Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/mK.

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

FINISHING French spirit polishing :One or more coats on old work

Melamine polishing on wood work (one or more coat).

ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Dismentaling existing variouse type of light fittings,celing fans,wall fans, exhaust fans, switch boxes etc i/c disconnections etc complete as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/LED fitting/LED downlighter of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall/in fallcilling including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. a) 2 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.b)3 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.c) 6 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.d) 5 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.e) 3 x 4 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.f) 6 x 4 sq. mm

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.20 mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.25 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm

Supplying and drawing following pair 0.5 mm dia FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

Supplying and drawing following pair 0.5 mm dia FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.4 Pair

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.2 run of cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.3 run of cable

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 4 Module

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8Module

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 12 Module

Supplying and fixing following Modular base & cover plate on existing modular metal/pvc boxes etc. as required. 1 or 2 Module

Supplying and fixing following Modular base & cover plate on existing modular metal/pvc boxes etc. as required. 3 Module

Supplying and fixing following Modular base & cover plate on existing modular metal/pvc boxes etc. as required.4 Module

Supplying and fixing following Modular base & cover plate on existing modular metal/pvc boxes etc. as required.6 Module

Supplying and fixing following Modular base & cover plate on existing modular metal/pvc boxes etc. as required.8 Module

Supplying and fixing following Modular base & cover plate on existing modular metal/pvc boxes etc. as required. 12 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet

Supplying and fixing the following ms flexible pipe complete with accessories etc as required. 25 mm size

Supplying, installation, testing & Commissioning of recessed type 30 W to 36W Full window glarefree opal Diffuser LED Panel of size 595mmX595mm suitable for existing calcium silicate false ceiling with MS Powder coated CRCA Housing, the total lumen of LED fitting should be 3600 or above in Cool day Light(5700K to 6500K), Power factor0.95, CRI 80, LED, Complete with all accessories including connections etc as required and as per direction of Engineer-in-charge.

Supplying, installation, testing & Commissioning of recessed type 15 W Round Downlighter with pressure die-cast aluminium housing and glare free opal diffuser, ceiling cutout 138 mm suitable for existing false ceiling, the total lumen of LED fitting should be 1400 or above in Cool day Light(5700K to 6500K), Power factor0.95, CRI80, LED Lamp Complete with all accessories including connections etc as required and as per direction of Engineer-in-charge.

Supplying, installation, testing & Commissioning of surface and wall mounted 20 Watt LED batten with aluminium housing and intergrated electronic driver total lumen of LED fitting should be 2000 or above in Cool day Light(5700K to 6500K), Power factor0.95, CRI80, LED Lamp Complete with all accessories including connections etc as required and as per direction of Engineer-in-charge.

Supplying, installation, testing and commissioning of 400mm sweep wall fan with regulator having revolving arrangement to be mounted on wooden block i/c connection etc required make:- Crompton/Havells/Orient/Usha.

Supplying, installation, testing and commissioning of 1200mm sweep5 Star rating energy efficient, white color, ceiling fan i/c wiring in the downrod of standard length (upto 30 cm) with 1.5 sqmm FRLS Pvc insulated copper conductor single core cable etc as required

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply , installation and testing of 6KVA, 50Hz, 230 volt online UPS system with Inbuilt isolation transformer having single phase input and single phase output with inbuilt Alfha numerical LCD display, comprised with a Battery bank of 16 Nos. of sealed maintenance free (SMF) Batteries of 26 AH, 12 volts for 30 mintues power bank of complete with sutaible size of copper conductor interlink wire and duly painted MS Rack etc as required by the Engineer-in-Charge.

Supplying, fixing, testing and commissioning of supply/return air diffusers made of powder coated 1.00mm thick aluminium sheet without volume control dampers with anti smudge ring and removable core complete per the site as requirement and taking away the dismantled material like diffusers as scrape as credit item on buy back basis as per the direction of engineering in charge.

Fixing of Linear return air grill in existing opening size 100x1000mm. Including washing & repairing/ aliement complete as required.

Dismentalling the existing diffuser with coller and , re-installation by making the new opening in the existing duct with blocking the old hole etc complete as required.

Dismantling and reinstallation of existing fire smoke detectors & R.I. on wall surface /ceiling/fall ceiling i/c disconnection & connection and testing commissioning as required in the personal branch office as per direction of engineering in charge.

Supply Installation Testing & Commissioning of Two Way or Three Way 3"/6" or better Ceiling Speaker, 40W @ 7.5/8 ohms, 15W tapping or Better @ 70/100V line, max SPL 1m : 95/100 dB or better, Coverage Angle 115° conical or better, Frequency Response (-10dB) 68 Hz – 17 kHz, etc complete required as per requirement.

Supply Installation Testing & Commissioning of 2-channel Digital power amplifier 2 x 240/300 Watts or More @ 100/70Volts, bridgeable, convection cooled, switching mode power supply, cooling system : Fan, frequency response (in Hz) :20Hz - 17/20 k, etc complete as required as per specifications.

Supply Installation Testing & Commissioning of Mixer 16 Channel with complete as required to meet the enclosed specification. 8 Channel mic input with phantom power or above Audio Mixer having Audio interface with 2 input channel & 2 output channels with AD/DA conversion 24-bit and USB 2.0 PC Interface ,THD(at 1kHz)0.005%, frequency response(-3dB) :20Hz to 65kHz, etc. complete as required as per specification.

Supply Installation Testing & Commissioning of gooseneck microphone with on/off switch, Polar Pattern: condenser, Cardiod, Frequency response : 50/70Hz - 17kHz, Impedance : 600 Ohm, Minimal terminating impedance: 2 kOhm, Maximum sound pressure level : 125 dB, Equivalent noise level : 21/28 dBA , Connection : XLR 3/5, Gooseneck Length : 50cm, etc complete required as per speciifcations.

Supply Installation Testing & Commissioning of Wireless Handheld Microphone with 16/18 or more channel, RF output 30mW or more (min range 10/30 mtrs), Cardiod pickup pattern, Frequency range : 50Hz-15kHz,Automatic setup function, microphone transmitter and receiver complete set required as per specifications.

Supply Installation Testing & Commissioning of 1.5sq mm heavy duty Loud speaker cable in existing conduit/open duct etc. complete as required as per specification.

Supply Installation Testing & Commissioning of Heavy duty 2 core shielded microphone cable in existing conduit/open duct etc. complete as required as per specification.

Supply Installation Testing & Commissioning of Digital Audio / Analog Audio Recorder with SD / USB recording along with playback capacity. It should supply with 500 Hrs recording capacity etc. complete as required as per specification.

Supply Installation Testing & Commissioning of HDMI transmitter and reciver pair.

Supply Installation Testing & Commissioning of 55"or above LED panel UHD resolution(3840 x 2160) with 400 nits briightness etc. complete as required. With flexible wall mount or Ceilling mount bracket for display.

Supply Installation Testing & Commissioning of Codec Based Full High Definition 1080P 60FPS Video Conferencing system bundle consist of , English Remote and Omni Directional advance Micro Phone ,Dual Display License ,1080P License inbuilt with all the cable and accessories with two LAN ports, inbuilt/external Recording on USB Port by connecting USB Pen drive or USB Hard disc. Complete with 1+3 Party Expandable to 1+7 Party Full HD 1080 P All Participants Multiparty License and One Year Support Charges for 1+3 Party MCU License for auto software upgrades. Should have facility to record the video conference.

Supply Installation Testing & Commissioning of Full HD PTZ Conference camera with Latest 12X Optical Zoom.Video Formats, 1080p60/50/30/25 720p60/50/30/25, Video signal Uncompressed on HDMI, HFoV 72°.

Supply Installation Testing & Commissioning of 10 meter HDMI Cable . Should have an overall shield against EMI/RFI interference Should be CL2 flame tested. etc. complete as required as per specification.

Supply, Installation, Testing & Commissioning of 24U (600W X 600D)MM floor mount closed rack complied with current industry practices, Steel Door - Plain, Vented at Bottom, Fully perforated and dual perforated, Glass Door with optional vented side trims for front to back air flow, fully recessible 19" split mounting angles at rear, top and bottom cover with cable entry provision, loading rate of 850kg, with required accessories etc. complete as required as per specification.

Supply Installation Testing & Commissioning of 8 X 8 HDMI matrix Switcher, Connects any of 8 HDMI sources to any of 8 HDMI displays, resolutions up to UHD (3840 x 2160), refresh rates of 30 Hz (4:4:4) and 60 Hz (4:2:0), front-panel pushbuttons, IR remote, RS-232 control, and Ethernet, HDCP 2.2 compatible, Signaling rates up to 3.4 Gbits

Sub Head: IV Credit item on account of old material Fittings/Downlighters

Sub Head: IV Credit item on account of old material Wire,conduits etc

Sub Head: IV Credit item on account of old material Switches/Socket

Sub Head: IV Credit item on account of old material Celling fan / Wall fan