Guru Gobind Singh Government Hospital Tender

Specification of Fully Automatic Hormone Analyzer Chemiluminicence based principle Minimum water consumption Minimum 12 wavelength ranging from 340-800nm Low sample dead volume of 50ul Monitoring QC Minimum maintenance required Throughput- 120 tests/hr Sample and reagent continuous loading On board capability: up to 144 samples Refrigerated reagent area User friendly data entry and patient reporting Bench top Automatic dilution Sample result storage-50000 Sample clot detection

Specification of Semi automatic Biochemistry Analyzer High performance Easy Operation Direct access keys Direct Printer Connectivity Monitoring of QC Open System with 10 analytical modes and 200 test programmable capacity Unique triple cuvette facility 56 direct access keys for faster operation Low reagent consumption Optional dry block incubator & battery pack for mobile use Light source – Quartz halogen lamp Test method – Fixed-time, Kinetic, End-point, factor, multi standards, bichromatic Reaction Cuvette – Flow cell 8 interference filters Photometeric range from 0 to 2.5 OD

HIGH POWER LASER THERAPY UNIT 1. Laser sources: 1064 nm; visible 650 nm; - Emission: continuous/pulsed/burst mode 2. Working modalities: manual and static diffusion 3. Automatic calculation of energy density and application time 4. Wide range of pre-set protocols with maps 5. Upto 50 customized memories 6. Independent setting for scanning and probe section 7. Simultaneous and separated operation for scanning and probe sections 8. Automatic calculation of application time and energy density 9. Access key for operating the equipment 10. Auto test to switch on/off the unit 11. Colour touch screen display 12. Protective goggles 13. Remote control 14. CE certification

Jet Ventilator Device to ventilate the pt through cricothyroitomy /bronchoscopy pt

ULTRASONIC CLEANER - Ultransonic Cleaner with lid Maximum Tank Volume of 25 Litre capacity. Internal dimensions around 500 x 300 x300 mm. Ultrasonic Frequency of around 35 Khz. - Cleaning Tanks to be made of Cavitation resistant Stainless Steel - Function to optimize sound distribution in the bath due to modulation of Frequency. - The operation cycle and the preset and the actual temperature to be displayed on the unit with selector switch for setting time duration and temperature. - System to permit quicker degassing of the used and unused cleaning solutions - Mechanism to prevent entry of fluids into the unit and turning knob to permit easy drainage.

Drill and Reamer Hand piece: • Selection of Drilling and Reaming with the same hand piece • Should have dual trigger for forward/ reverse and mode • Drilling Speed – 800 to 1000 rpm , Reaming Speed – 0 to 250 rpm • Should have variable speed control on the hand piece • Should deliver maximum torque of 100-150 in/lbs • Drill torque should be 20 - 41 in/lbs • No lubrication required. • With appropriate adaptors for drilling, reaming and pin placement and wire placement • Weight of hand piece with battery should be not more than 4 lbs • Fully Cannulated 4.0 mm hand piece • Should have Pistol grip Hand piece • Should be autoclavable • Dedicated Forward and Reveres switch with safe mode • Noise level should not be more than 67db Handpieces should be made of metallic alloy/aluminum Sagital Saw Hand piece: Qty 1 • Should have variable speed controls with the cpm speed of 0 - 11500 cycles per minute • Saw Noise level should not be more than 75db • Weight of hand piece with battery should be not more than 4. lbs • Blade mount should be adjustable to different angles with 360 degree rotation • Should have tool less mounting of accessories • No lubrication required • Should be autoclavable • Should have safe mode • Headpieces should be made of metallic alloy/aluminum Drill and reaming Attachments: • 1/4 inch Jacobs Drill Attachment with key -Qty 1 • AO Reamer Attachment-Qty 1 • Wire Collet (0.7 to 1.8 mm) – Qty 1 Battery Charger: Qty 1 • 220-240 volts charger and should have the feature to count the charging cycle for a particular battery, • Should have capability to identify the worn out battery • Should have two/four bay battery charger • Should have an indicator to provide battery status for charging. Battery:-Qty 3 • Should have Li-ion battery • Battery should be of 9 to 12 volts • Weight should be not more than 600gms. • Should have average run time of more than 18 minutes • No need of reconditioning with no memory effect • Should have transfer shield for asceptic transfer of battery. Certifications- The equipment should be CE and ISO certified