Directorate General Defence Estates Tender

Supplying and fixing jointing and testing of cast iron sluice valve of size 150 mm dia class PN-1.0 conforming to IS : 14846 flanged ends drilling having stainless spindle with cast iron wheel at top with nut bolts washers complete

Supplying and fixing jointing and testing of cast iron sluice valve of size 100 mm dia class PN-1.0 conforming to IS : 14846 flanged ends drilling having stainless spindle with cast iron wheel at top with nut bolts washers complete

Supply and fixing of C 1 foot valve of size 150 mm dia lift and swing single door IS 4038. Make : Kirloskar, leader

Construction of valves pit chamber having internal dia mention 90 cm x 60 cm x 60 cm (internal height) using PCC (1:4:8) 40 mm graded stone aggregate for foundation 15 cms thick 23 cm thick brick wall in CM (1:4) 10 mm thick rendering all round the brick work with 1:6 cement mortar, PCC (1:2:4) type B-1 coping with 20 mm grade stone aggregate for grouting MS frame including 3 mm thick top sheet MS top sheet cover with locking arrangement , MS frame out of 40x40x6 mm thick angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primers finishing coal including necessary excavation in any type of soil returning filling in and removal of surplus soil to a distance n. exc. 50 M as directed and specified by Engineer-in-charge.

Supply and fixing of Bus bar chamber 300 mm x 300 mm size made out of MS sheet of 2 mm thick consisting aluminium bus bar of 300 Amp with drilled holes to make the connections complete all as specified and directed by Engineer-in-Charge.

Supplying rubber mat of size 2M x 1 M 19 mm thick 1.1 kv grade

Supplying and fixing of non return valve of 150 mm dia without by pass arrangement with nuts bolts washer complete as specified and directed by Engineer-in-charge.

Supplying and fixing of non return valve of 100 mm dia without by pass arrangement with nuts bolts washer complete as specified and directed by Engineer-in-charge.

Supply and fixing of MS pipe 150 mm dia, 6mm thick with all fittings fixed to wall or ceiling for suction of the pump as specified and directed by Engineer-in-Charge.

Supply and fixing of MS pipe of 100 mm dia 4.5 mm thick with all fitting fixed to wall or laid into trenches completed as specified and directed by Engineer-in-Charge

Supply of submersible pump set suitable for discharge of 4000 gallons per hour at 100 mt head make kirloskar/ KSB tied with steel wire rope top to bottom to secure the pump set complete 10mm dia

Assembly, lowering, commissioning and testing of submersible pump set suitable for discharge of 4000 gallon per hour at 100 mt head, the pump shall be lowered in the borewell alongwith steel wire rope & size 10 mm dia for securing the pumps properly.

Supplying / Installation/ testing and commissioning electric control panel cubical type, weather proof totally enclosed suitable for 440V, 3 Phase, 50Hz Electric supply fabricated out of angle, 40 x 40 x 6mm and MS plain sheet 2mm thick complete with two coats of spray painting of enamel paint with a prior coat of primer comprising of following:- a) Bus bar TPN 500A – 1 Set b) MCCB 400 Amp – 1 No. c) MCCB 200 Amp – 2 No. d) Star Delta Starter fully automatic suitable to run induction motor pump set of discharge 3000 LPM at 30m head - 2 Nos. e) Pump guard for the protection against single phasing reverse running over loading reverse running – 2 Nos. f) Volt meter O-500 Volt range with selector switch – 1 No. g) Amen O-30 Amp with CTs & with selector switch – 2 Nos. h) Indicating lamp with bulb complete – 1 No. i) Single phase preventer VSP2 – 2 Nos. j) Central copper cable of suitable size for inter connection of panel accessories – 1 Job k) Back up fuses – 1 Set l) Termination incoming/ outgoing cable with suitable size of ferrules and compression gland m) Length of suitable length made out of 40mm x 40mm x 6mm angle iron including grouting the legs in 1:2:4CC

Supplying / Installation/ testing and commissioning electric control panel cubical type, weather proof totally enclosed suitable for 440V, 3 Phase, 50Hz Electric supply fabricated out of angle, 40 x 40 x 6mm and MS plain sheet 2mm thick complete with two coats of spray painting of enamel paint with a prior coat of primer comprising of following:- a) Bus bar TPN 100A – 1 Set b) MCCB 63A – 1No c) MCCB 32A – 1 No. d) Star Delta starter suitable for 7.5 HP/ 10HP motor e) Single phase preventer VSP2 – 1 No. f) Back up fuses – 1 Set g) Voltmeter 0.500 A with selector switch – 1 No h) Ameter 0.30A with selector switch – 1 No. i) Indicating lamp with bulb complete – 1 Set j) Single phase preventer – 1 No. k) Central copper cable of suitable size for inter connection of panel accessories – 1 Job l) Termination incoming/ outgoing cable with suitable size of ferrules and compression gland m) Legs of suitable length made out of 40mm x 40mm x 6mm angle iron including grouting the legs in 1:2:4 CC

Supplying / Installation/ testing and commissioning electric control panel cubical type, weather proof totally enclosed suitable for 440V, 3 Phase, 50Hz Electric supply fabricated out of angle, 40 x 40 x 6mm and MS plain sheet 2mm thick complete with two coats of spray painting of enamel paint with a prior coat of primer comprising of following:- a) Bus bar TPN 100A – 1 Set b) MCCB 63A – 1No c) MCCB 32A – 1 No. d) Star Delta starter suitable for 15 HP motor e) Single phase preventer VSP2 – 1 No. f) Back up fuses – 1 Set g) Voltmeter 0.500 A with selector switch – 1 No h) Ameter 0.30A with selector switch – 1 No. i) Indicating lamp with bulb complete – 1 Set j) Single phase preventer – 1 No. k) Central copper cable of suitable size for inter connection of panel accessories – 1 Job l) Termination incoming/ outgoing cable with suitable size of ferrules and compression gland m) Legs of suitable length made out of 40mm x 40mm x 6mm angle iron including grouting the legs in 1:2:4 CC

Supply connecting testing and commissioning submersible cable with copper conductor, 1100V grade standard size following cross sectional area all as

4 sqmm 3 core

2.5 Sqmm 3 core

Supplying and fixing XLPE insulate armoured hence duty electric cable with aluminum conductor 1100 Volt grade including making connection as specified and directed by Engineer-in-Charge

120 x 4 core

95 x 4 core

50 x 4 core

35 x 4 Core

Supplying/ Fixing column pipe made out of GI Pipe of medium grade with large welded 8 threaded complete with nut bolt & washer as specified and directed by Engineer-in-Charge

2" inch dia

3" inch dia