Department Of Post Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Costs
EMD
₹ 90,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Selection Of Firm For Upgradation Expansion And Modernization Of National Philatelic Museum To National Postal Museum
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DOP_842244_1Tender No
P-17/9/2024-Phil-DOPTender Authority
Department Of Post ViewPurchaser Address
-Website
http://https://www.indiapost.gov.in/vas/Pages/IndiaPostHome.aspx
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Selection of firm for upgradation expansion and modernization of National Philatelic Museum
Selection of firm for upgradation expansion and modernization of National Philatelic Museum to National Postal Museum
BOQ Items
... More
SITC of 310mm ±15% floor surface linear, 12W ±15%, 700 lumens ±15%,Efficacy54lm/W, 15 x 60° beam ±15%,Variable RGBW colours and seperate CTC channel from 1000K- 12500K.
Supply of 310mm ±15% long exterior-rated architectural floor surface mounted, IP66 rated, linear up light complete with antiglare shield. The power consumption should be 12 watts ±15%, 700 lumens delivered ±15%, 15 x 60° beam angle ±15%, Variable dynamic colours and seperate CTC channel from 1000K-12500K. LED from CREE/NICHIA/LUMILED/OSRAM. The housing material should be die-cast aluminum with Electrostatically applied polyester powder coating.The luminaire must come with IK08 impact protection rating. It should have CRI70, and tight flux binning. The driver should be integrated DC with PF0.9 &. The fixture must come with Junction boxes and Hybrid cables to carry both Power and Data. The fixture must be capale of withstanding ambient temperature range of -30°C to 45°C. The lifetime of the luminaire (L70 @ Ta-35deg C) should be at least 50,000 burning hours. Luminaire should have C5-High corrosion resistance with self-declaration of ASTM B117 for 1440 hours of salt spray test. All mounting accessories shall be stainless steel (Minimum -316) for all lighting fixtures.The luminaire manufacturer shall provide optical performance, polar diagram and photometric data in various formats including IES files in accordance with IES 79-08. This includes all the required hardware for the successful operation of the luminaire. All the technical parameters of the luminaire need approval from the lighting consultant.
40
-
-
... More
SITC of RGBW Outdoor rated Uplight light, 150W ±15%,7000 lumens ±15%, Efficacy 40lm/W, Dynamic colours and Variable CTC from 1000K to 12500K:
Supply of exterior-rated architectural uplighter, IP66 rated,RGBW uplighter complete with antiglare snoot. The power consumption should be 150 watts ±15%, 7000 lumens delivered ±15%, with external mounted diffusers for various beam angles, Dynamic colours and seperate color temperature channel for CTC control from 1000K- 12500K. LED from CREE/NICHIA/LUMILED/OSRAM. The housing material should be die-cast aluminum with Electrostatically applied powder coating. The luminaire must come with IK08 impact protection rating. It should have CRI70, and tight flux binning. The driver should be integrated DC with PF0.92 &. The fixture must come with cable tails for power and DMX. The fixture must be capale of withstanding ambient temperature range of -30°C to 45°C. The lifetime of the luminaire (L70 @ Ta-35deg C) should be at least 100,000 burning hours. Luminaire should have C5-High corrosion resistance with self-declaration of ASTM B117 for 1440 hours of salt spray test. All mounting accessories shall be stainless steel (Minimum -316) for all lighting fixtures.The luminaire manufacturer shall provide optical performance, polar diagram and photometric data in various formats including IES files in accordance with IES 79-08. This includes all the required hardware for the successful operation of the luminaire. All the technical parameters of the luminaire need approval from the lighting consultant
45
-
-
... More
SITC of RGBW Outdoor rated Uplight light, 35W ±15%,1800 lumens ±15%, Efficacy 40lm/W, Dynamic colours and Variable CTC from 1000K to 12500K:
exterior-rated architectural uplighter, IP66 rated,RGBW uplighter complete with antiglare snoot. The power consumption should be 35 watts ±15%, 1800 lumens delivered ±15%, with external mounted diffusers for various beam angles, Dynamic colours and seperate color temperature channel for CTC control from 1000K- 12500K. LED from CREE/NICHIA/LUMILED/OSRAM. The housing material should be die-cast aluminum with Electrostatically applied powder coating. The luminaire must come with IK08 impact protection rating. It should have CRI70, and tight flux binning. The driver should be integrated DC with PF0.92 &. The fixture must come with cable tails for power and DMX. The fixture must be capable of withstanding ambient temperature range of -30°C to 45°C. The lifetime of the luminaire (L70 @ Ta-35deg C) should be at least 100,000 burning hours. Luminaire should have C5-High corrosion resistance with self-declaration of ASTM B117 for 1440 hours of salt spray test. All mounting accessories shall be stainless steel (Minimum -316) for all lighting fixtures.The luminaire manufacturer shall provide optical performance, polar diagram and photometric data in various formats including IES files in accordance with IES 79-08. This includes all the required hardware for the successful operation of the luminaire. All the technical parameters of the luminaire need approval from the lighting consultant
20
-
-
... More
SITC of LED Source Weather Proof IP66 Moving Head : Light source: LED 600w, 6500K and full CMYC color mixing. The fixture must have a minimum LED lifetime of 20000 hrs(to 70% luminous output).Beam Angle:Narrow Beam Min.6 deg to 40 deg , Display On board control, Pan/Tilt rotation : 540°/270°（8-16bit) , Rotating Gobo : 7 gobos plus open, wheel rotation, gobo rotation, indexing and shake. Gobo animation and flow effects included.Additional static gobo wheel with 8+open gobos with index rotation and shake.Color mixing: CMY, independently variable 0-100%
Color wheel: 7 color filters plus open.CTC Control from 6500K - 2700K.Rotatable framing module, +/-60°, with 4 individually controllable full framing blades with variable angle and position.
Prism: 2 rotating/indexing prisms (4-facet circular prism and 6-facet linear)
Frost: Soft frost effect and heavy frost effect included , Focus:Motorized. RDM , DMX512 , IP66 and C5-M rated.
4
-
-
... More
SITC of RGBW Outdoor rated Uplight light, 70W ±15%,3500 lumens ±15%, Efficacy 40lm/W, Dynamic colours and Variable CTC from 1000K to 12500K:
Supply of exterior-rated architectural uplighter, IP66 rated,RGBW uplighter complete with antiglare snoot. The power consumption should be 70 watts ±15%, 3500 lumens delivered ±15%, with external mounted diffusers for various beam angles, Dynamic colours and seperate color temperature channel for CTC control from 1000K- 12500K. LED from CREE/NICHIA/LUMILED/OSRAM. The housing material should be die-cast aluminum with Electrostatically applied powder coating. The luminaire must come with IK08 impact protection rating. It should have CRI70, and tight flux binning. The driver should be integrated DC with PF0.92 &. The fixture must come with cable tails for power and DMX. The fixture must be capale of withstanding ambient temperature range of -30°C to 45°C. The lifetime of the luminaire (L70 @ Ta-35deg C) should be at least 100,000 burning hours. Luminaire should have C5-High corrosion resistance with self-declaration of ASTM B117 for 1440 hours of salt spray test. All mounting accessories shall be stainless steel (Minimum -316) for all lighting fixtures.The luminaire manufacturer shall provide optical performance, polar diagram and photometric data in various formats including IES files in accordance with IES 79-08. This includes all the required hardware for the successful operation of the luminaire. All the technical parameters of the luminaire need approval from the lighting consultant
39
-
-
... More
SITC of Multichannel Digital Network Based Power Amplifier with 1250W - 1300W ormore per channel @ 8 Ohms power output; should have four or more inputs and outputs analog audio channels; Should support 70Vrms and 100Vrms output on all output channels; THD 0.35% orbetter; Should support Cooling Continuously variable speed forced air; Voltage Gain 34dB ormore; Digital audio bus compatibility up to 8 or more audio channel; Should have bridgeable channels even for 100Vrms mode to operate with 200Vrms output; 2digital audio bus RJ 45 port; 1 Ethernet RJ45 port for monitoring and configuration; Should have DSP features Incl. Limiters, Input/output EQ, Delay, Matrix Mixer, Speaker Line Monitoring; Damping Factor 1500 ormore; etc
2
-
-
... More
Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, Latest Generation, 500GB SSD, 32GB DDR4 RAM & 16 GB GPU to drive required HDMI output
3
-
-
... More
SITC of DMX lighting console with show control software compatible with RDM feature. Item includes all accessories required to integrate all programmable facade lights including DMX/RDM splitters, DMX cable, Power Cable, Distribution boxes, Junction boxes, earthing pits, etc complete as per satisfaction of engineer in charge.
1
-
-
... More
SITC of Networked Digital Signal Processor with 12 -16 or above inputs and 8 - 10 or above outputs; should have 12 - 14 Control Inputs and 6 - 8 Logic Outputs for GPIO Integration; 48V phantom power on all analog inputs; THD: 0.01% 20Hz to 20KHz; Crosstalk: -75dB orbetter; Open architecture software configurable; Separate logic processing power; Should have built-in 2 x RJ45 ports compatible with Dante / AES67 / any proprietary protocol for audio signal Inputs & Outputs routing digitally over an ethernet / CATX cable; 1 Ethernet port for Monitoring and configuration; Capable to handle +5V unloaded logic output voltage; Should have speech sense engine; Capable to control 3rd party devices with TCP IP and RS232; Should have 1nos of RS 232 port for integration with control System; Should have Bi-Directional Locate Functionality; Should have 48 or more digital audio Channel Bus; Should have monitoring LED for COM, STAT, ERR and PWR; etc.
1
-
-
... More
Providing and laying of 2 coats of acrylic/emulsion/plastic paint of approved quality & shade over 2 coats of primer on the external wall surfaces.
10000
-
-
... More
SITC of All-Weather Compact 2-Way Coaxial Loudspeaker with 1 x 15" or more LF Driver; Should have Highly weather-resistant IP56 rating; Coverage : 90x90deg ormore; Components: 380 mm (15 in) or more woofer with Kevlar-reinforced cone and 75 mm (3 in) voice coil, 38 mm (1.5 in) diaphragm compression driver; Should support overload protection; Frequency Range (-10 dB) : 54Hz–19kHz orbetter; Frequency Response (±3 dB) : 82Hz–19kHz orbetter; Long-Term 100hrs System Power Rating (pk): 2000W or more; Sensitivity (2.83V @ 1m): 98dB - 101dB ormore; Maximum SPL (pk): 131dB - 134B ormore; Should support Transformer Taps (70V/100V): Minimum three power tapping including 300W or better; Enclosure: ABS with Glass enclosure; Attachment: Two M10; Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing; Input Connection: CE-compliant covered barrier strip terminals; Environmental: IP56 per IEC529 or better; etc.
8
-
-
... More
SITC of Multichannel Power Amplifier with 3000W 2Ω, 2100W 4Ω, 1200W 8Ω , SNR : 103dB, THD0.5% , Frequency Response: + 0 dB, -1 dB, Crosstalk (below rated power) 20 Hz to 1 kHz 70dB, Damping Factor 500, Crosstalk 70dB, Should support Cooling Continuously variable speed forced air
1
-
-
... More
Supply Installation (flat/curve), testing & commissioning of outdoor Micro LED video wall along with processor with pixel pitch of 10mm or less , 5000 nits or more brightness. Any cables, graphic processor, accessories required for installation and connection of display cable to the server room should be included in the cost.
110
-
-
... More
Provision, designing and fixing of structure for LED panel made out of appropriate structural steel sections. The item includes any labour, tools, machineries, scaffolding/ladder/ropes etc to do the required work in the scope complete as per direction of Engineer-in-Charge.
110
-
-
... More
Repair and restoration of exterior facade including removal of decayed and deteriorating surfaces, reapair work of broken facade elements, repairing/replacement of window screens and panels, filling up of any surface cracks, applying putty to even the surface wherever required, relocation/repurposing of services visible on facade, installation of window screens with necessary framework, etc. The item includes any labour, tools, machineries, scaffolding/ladder/ropes etc to do the required work in the scope complete as per direction of Engineer-in-Charge.
1
-
-
... More
SITC of Flying, Outdoor Rated dual 18" LF or more high power subwoofer; Frequency Range (-10 dB) 28Hz to 1kHz ormore; Frequency Response ( ± 3 dB) 41 Hz to 1.0kHz or more; System Sensitivity (dB-SPL, 1W @ 1m)-102dB orbetter; Maximum SPL (pk) 141dB or better; Long-Term System Power Rating - (pk): 6400W or better; etc.
2
-
-
... More
Dismantling of Walls, False ceiling, flooring, services, doors, paneling etc. inside the museum area and disposal of debris as per the requirement. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
1
-
-
... More
Dismantling of existing museum fitouts, furnitures and fixtures including storage of appliances and usable items and disposal of debris as per thre requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
1
-
-
... More
Complete designing, installation and commissioning of all the zones in totality required electrical works, power backup and lighting works like UPS, Sockets, Cables, Connectors, Plug Points, Switches, Conduits etc as per design and site condition, all accessories and hardware to be included in this item. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
1
-
-
... More
Complete designing, installation and commissioning of fire detection and suppression system along with approval from local fire authority for the museum including manual call points, hooters, ABC type and CO2 type fire extinguishers, etc complete as per satisfaction of engineer in charge.
1
-
-
... More
Complete designing, installation and commissioning of all the zones in totality required air conditioning works including indoor and outdoor units, ventilation system, conduits and other required accessories as per design and site condition, all accessories and hardware to be included in this item. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
1
-
-
... More
Complete designing, installation and commissioning of all the zones in totality required various types of lights spot lights, profile lights, washers, etc for general and exhibit lighting as per design and site condition, all accessories and hardware to be included in this item.Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
1
-
-
... More
Complete provision and repairwork of all Infrastructural works including repairworks, additional walls, replacement/replair of doors and windows, making of ramps, railings, subflooring, leveling of floor, raceways, plumbing and drainage, waterproofing etc as per drawings and specifications.
1
-
-
... More
Provision and fixing of backlit museum layout map highlighting various zones in the museum. The front surface is to be made out of multi layered acrylic of varying transparency with appropriate masking. The panel shall include a provision for a lightbox made of prelam perforated sheet with an arrangement of LED strip lights to achieve the desired brightness of the graphic. The bottom and top units should have a Lit line finish to illuminate the installation with the desired color of light. Frame of the outer body to be finished in powder coating / PU paint as per the design. The dimensions may vary based on design and site conditions. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x height) : 1800mm x 1200mm
1
-
-
... More
Providing and placing in position medium back static chair having back size approximately 450mm(W) x 500mm(H), seat size approximately 450mm(W) x 490mm(D). The back is made of injection moulded glass filled nylon and upholstred using net fabric. The armrests are fixed in position and Armrest top has an integrated layer of thermoplastic elastomer. The chair is featured with fixed base made of MS duly powder coated. The product shall be complete as per the approved sample and as per the direction of Engineer-In-Charge. The complete furniture unit is factory assembled with knock down fittings.
50
-
-
... More
Providing and placing in position medium back revolving chair having back size approximately 450mm(W) x 500mm(H), seat size approximately 470mm(W)x490mm(D).The back is made of injection moulded glass filled nylon and upholstred using net fabric. The armrests are up-down adjustable. Armrest top has an integrated layer of thermoplastic elastomer. The chair is provided with a Lumbar support consists of Polypropylene pad with loulded polyurethane foam and covered with Polyester Fabric. The height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. The Chair mechanism is designed with the following features: 360 revolving type, Single point control, Tilt tension adjustment, 2 Position Locking with anti-shock feature and The pneumatic height adjustment. The product shall be complete as per approved sample and as per the direction of Engineer-Incharge. The complete furniture unit is factory assembled with knock down fittings.
13
-
-
... More
Provision and fixing acousitc ceiling with appropriate NRC level in all blocks with appropriate frame work in required GI grid section at ceiling level as per design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
950
-
-
... More
Provision, fixing and application of 12.5 mm thick tapered edge glass reinforced gypsum board ceiling on appropriate GI framework as per design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
170
-
-
... More
Provision and fixing of artistic ceiling element made out of baklit acrylic boxes. The front side of all boxes to have custom printed graphics and edges to be finished in paint. Item to include necessary hardware and accessories including fixing to existing ceiling grid to achieve the desired look as per satisfaction of engineeer in charge.
216
-
-
... More
Provision and fixing of a fixed cycle simulator consisting of a cycle connected with simulator mechansims to send input to server when handles and pedals are operated. The cycle setup is to be floor mounted and structurally stable to withstand the load of a fully grown person while operating the cycle. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
2
-
-
... More
Provision and fixing of a description plaque made out of 12-18mm thick HDHMR and powder coated MS sections. The description plate shall be made out in SS with etching and mounted on the 12-18mm thick HDHMR base. The item includes mounting of the unit to floor/platform and finishing the remaining area in PU paint. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 450mm x 300mm x 1050mm
7
-
-
... More
Provision and fixing of a display case as per the design. The display unit shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The front side of the display case to be made out of 10mm thick toughened glass and a fabric backdrop for artifact display area. The display case should include provisions for mounting artifacts and conduits. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 1200mm x 450mm x 2100mm
1
-
-
... More
Provision and fixing of a display case as per the design. The display unit shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The front side of the display case to be made out of 10mm thick toughened glass and a fabric backdrop for artifact display area. The display case should include provisions for mounting artifacts and conduits. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 1500mm x 300mm x 2100mm
3
-
-
... More
Provision and fixing of a display niche in existing partition wall as per the design. The display unit shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The front side of the display case to be made out of 10mm thick toughened glass and to have a fabric backdrop for artifact display area. The display unit should include provisions for mounting artifacts and conduits. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 500mm x 500mm x 500mm
1
-
-
... More
Provision and fixing of a display niche in existing partition wall as per the design. The display unit shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The front side of the display case to be made out of 10mm thick toughened glass and to have a fabric backdrop for artifact display area. The display unit should include provisions for mounting artifacts and conduits. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 1115mm x 500mm x 1950mm
4
-
-
... More
Provision and fixing of a display niche in existing partition wall as per the design. The display unit shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The front side of the display case to be made out of 10mm thick toughened glass and to have a fabric backdrop for artifact display area. The display unit should include provisions for mounting artifacts and conduits. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 450mm x 450mm x 300mm
14
-
-
... More
Provision and fixing of a display podium as per the design. The podium shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with pu paint of approved shade. Item to include all the fittings, hinges, hardware, locks, magnetic catchers, push button etc. required as per design. The box shall be designed with support structure to hold the weight. Dimensions may vary as per design requirements. The item includes all the necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes etc to do the required work is in the scope complete as per direction of Engineer-in-Charge.
Overall Size (width x depth x height) : 600mm x 450mm x 850mm
1
-
-
... More
Provision and fixing of a display shelf as per the design. The display shelf shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (depth x height) : 450mm x 1200mm
11
-
-
... More
Provision and fixing of a display table as per the design. The display table shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) with appropriate framework and finished with PU Paint. The top part of the display table should be made out of 10mm thick toughened glass with MS framework and profile lights. The display table should include provisions for mounting artifacts, lighting and conduits. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 1500mm x 500mm x 850mm
1
-
-
... More
Provision and fixing of a display table as per the design. The display table shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) with appropriate framework and finished with PU Paint. The top part of the display table should be made out of 10mm thick toughened glass with MS framework and profile lights. The display table should include provisions for mounting artifacts, lighting and conduits. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 1500mm x 450mm x 1050mm
2
-
-
... More
Provision and fixing of a display table as per the design. The display table shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) with appropriate framework and finished with PU Paint. The top part of the display table should be made out of 10mm thick toughened glass with MS framework and profile lights. The display table should include provisions for mounting artifacts, lighting and conduits. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 5400mm x 450mm x 1050mm
1
-
-
... More
Provision and fixing of lenticular system consisting of rotating triangular pillars in graphic finish with each side of width 100mm to 150mm and placed equidistant while maintaining a clear gap for unhindered rotation. The rotating mechanism is to be concealed on top or bottom of the arrangement and should be programmable to control the speed and duration of rotation of the lenticulars. It is to be ensured that all the lenticulars (triangular pillars) to have syncronised rotation and have to rotate or stop at the same time and speed. Quantity to be measured in terms of the visible elevational area covered by overall lenticular system. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
4
-
-
... More
Providing and applying Textured Paint of approved make, shade and design over wall/ceiling as directed by the Engineer-in-charge. Texture paint will be applied over surface finished with one coat of primer applied over white cement based putty of average thickness 1 mm, of approved brand and manufacturer. Putty shall be applied over plastered surface to prepare the surface even and smooth complete. The textured Paint will be finished with two coats of emulsion paint of approved make and shade as specified by Engineer-in-Charge. The rates include all materials, Labour, tools, scaffolding, plants and equipment. Nothing shall be paid extra on this item.
95
-
-
... More
Providing and Fixing of Linear Grooved Slats Sound Absorption Panels HDF based Melamine Finish Sound Absorption Panels on walls or ceiling over existing substrate. The panels are made of Fire Rated Red Color High Density Fibreboard of density about 800 kg/m3 with low formaldehyde content. The top surface is laminated with melamine finish. Each panel is having tongue and groove structure on the long side with an additional groove to hold the clip of size 2440mmX128mmX15mm. The back of each panels is pasted with acoustic fleece. The front of the panel is grooved while the back is perforated with holes. The installation is to be done on a aluminium channel with galvanized steel clip system. Once installed, the edges if open are covered with L profile of similar shade. The final finish as per the approved sample and as per the direction of Engineer-In-Charge.
150
-
-
... More
Providing and fixing OF unicolour decorative laminate with homogeneous same color of decorative and core layers with specially treated amino resins as per 438:3 -2005,IGBC, FSC & Green Guard. The final design and installation shall be subject to the approval and satisfaction of the Engineer-in-charge.
47.5
-
-
... More
Hand Painting: Design, Supply and execution of Hand Painted works (colouring and giving an artistic touch to it and applying multiple coats of paint to give final touch) on internal and external surface, with approved make paints, including preparation of surface like putty, cleaning, rubbing etc. and also including all accessories, safety harness etc. complete in all respect as per direction of Engineer-in- charge. Primer- Water based primer suitable for interior/exterior application as an undercoat to interior/exterior emulsion is to be used. Interior/Exterior weather proof paint- Weather proof acrylic smooth emulsion with silicon additives having anti-algal property is to be used. Top protective PU Coating- A water based Polyurethane clear coating having smooth finish is to be used for top coat. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
47.5
-
-
... More
Providing and painting PU paint of approved brand and shade over fit-outs, wall paneling, MS structure or any other surface with two or more coats to achieve a given even shade, including one coat of primer, preparation of surface using automotive putty, thinner etc. surface duly emery papered to give a perfectly smooth and even prepared surface before painting etc. complete in all respect as per satisfaction of Engineer-in-charge. The rates includes all materials, Labour, tools, plants and equipment. Nothing shall be paid extra on this items.
28.5
-
-
... More
Provision and fixing of a hard compressed fiber glass core panel wrapped with fabric. The panel should feature square edges and edges chemically resin hardened, with a minimum density of 60 Kg/m³ and NRC (Noise Reduction Coefficient) of 0.75. Item to include all necessary hardware and accessories required for complete fabrication of the unit as per satisfaction of the engineer in charge.
95
-
-
... More
Provision and fixing of custom made flip window mechanism comPrising of vertically lifted shutters with soft closing hinges and finished as per design. The shutter to have sensor based mechanism to send signal to processor when the window is lifted and closed. All hardware and joineries to be concealed in shutter/adjoining panel. Flip window shutter should be big enough to completely cover a 16" screen mounted underneath. Item to include all necessary hardware and accessories required for complete fabrication of the unit as per satisfaction of the engineer in charge.
8
-
-
... More
Providing & Laying “Resin based Epoxy” flooring in artistic manner of appropriate thickness, transparency etc. as required to meet the design intent on any surface. The scope includes but not limited “ Providing and applying a primer two component, Epoxy Resin and Epoxy Hardener, Epoxy material over a surface prepared after proper grinding by equipment to remove loose particle, contamination and latiance to provide a sound gripping surface.”
The Epoxy primer has to ensure the excellent penetration and sealing of surface as per the relevant drawing and specifications and under the directions of engineer-in-charge.
1116
-
-
... More
Provision and fixing of artistic facade made out of 4mm-6mm fibrework over 12-18mm thick HDHMR panelling to replicate design elements consisting of low and high relief elements finished as per design. Item to include all necessary hardware and accessories required for complete fabrication of the unit as per satisfaction of the engineer in charge.
38
-
-
... More
Provision and fixing of artistic mural made out of 4mm-6mm fibrework over 12-18mm thick HDHMR panelling to replicate design elements consisting of low and high relief elements finished as per design. Item to include all necessary hardware and accessories required for complete fabrication of the unit as per satisfaction of the engineer in charge.
30
-
-
... More
Provision and fixing of a replica of gramophone as per design reference. Item to include all necessary hardware and accessories required for complete fabrication of the unit as per satisfaction of the engineer in charge.
1
-
-
... More
Provision & fixing of high quality 3m vinyl prints on 6mm thick mdf back Paneling with matte lamination and glass frame with beading as per selected design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
5
-
-
... More
Provision & fixing of high quality 3m vinyl prints on Wall Paneling (ply/mdf/12-18mm thick HDHMR) (flat/curved) with matte lamination; surface to be treated with putty and paint to make suitable surface for pasting the vinyl. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
713.41
-
-
... More
Curating , Designing , developing, providing, casting, installing erecting, fixing final finishing and commissioning of hyper realistic mannequins in human scale of required material (Fibre, Silicone, Wax etc. as required), shape, size, posture, colour, expression, gesture, design including costume and accessories of all characters i.e. Hair grafting, silicon pigmentation, etc. on the basis of the design concept / model / prototype / drawings. The 3D asset to be designed in line with the approved characters as described. Each mannequin should be securely mounted on a stable base to ensure stability and safety. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
9
-
-
... More
Provision and fixing of artistic installation as per design. The installation to be made out of backlit acrylic boxes of various sizes distributed through out the exhibit area with custom graphics printed on front side. Provision for mounting a hemispherical screen of tentative dia 1200mm. The installation is to be finished in various materials like paint, vinyl, metallic coatings, etc to achieve the desired look as per design. The item to include all necessary hardware, strcutural support and accessories to make it a freestanding installation including taking necessary supports from walls, ceiling. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x height) : 5200mm x 2590mm
1
-
-
... More
Provision and fixing of artistic installation as per design. The installation is to resemble a scaled up version of pen divided into two parts and fixed vertically in writing position. The top and bottom part are separated vertically and the space in between is composed with replicas of elements like postcard, letters, etc. The installation is to be finished in various materials like paint, vinyl, metallic coatings, paper, etc to achieve the desired look as per design. The item to include all necessary hardware, strcutural support and accessories to make it a freestanding installation including taking necessary supports from walls, ceiling. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 900mm x 900mm x 1450mm
1
-
-
... More
Provision and fixing of artistic installation as per design. The installation is to resemble a scaled up version of a disected mashaal with representative letters instead of fire. The installation is to be finished in various materials like paint, vinyl, metallic coatings, paper, etc to achieve the desired look as per design. The item to include all necessary hardware, strcutural support and accessories to make it a freestanding installation including taking necessary supports from walls, ceiling. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 1270mm x 1055mm x 2400mm
1
-
-
... More
Provision and fixing of artistic installation as per design. The installation comprises of a clear glass dome fixed on a conical base. The centre to include a backlit box and rotating miniature models and replicas as per design. The installation is to be finished in various materials like paint, vinyl, metallic coatings, paper, etc to achieve the desired look as per design. The item to include all necessary hardware, strcutural support and accessories to make it a freestanding installation including taking necessary supports from floor. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 1910mm x 1910mm x 1740mm
1
-
-
... More
Provision and fixing of an interactive table based on miniature models. The top part of the table to have provision to mount a touch screen of 65" and a server. The table shall be made out of 12-18mm thick HDHMR with appropriate framework and fnished in PU paint.Item to include necessary conduiting, miniature models and hardware required complete as per the satisfaction of engineer in charge.
Overall Size (width x depth x height) : 1800mm x 1200mm x 1050mm
1
-
-
... More
Provision and fixing of a kiosk as per the design. The kiosk shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The kiosk should include provisions for mounting a TV, conduits, and housing a server. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 600mm x 400mm x 850mm
8
-
-
... More
Provision and fixing of a kiosk as per the design. The kiosk shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The kiosk should include provisions for mounting a TV, conduits, and housing a server. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 900mm x 250mm x 2100mm
4
-
-
... More
Provision and fixing of a kiosk as per the design. The kiosk shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The kiosk should include provisions for mounting a TV, conduits, and housing a server. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 1450mm x 250mm x 2400mm
2
-
-
... More
Provision and fixing of a kiosk as per the design. The kiosk shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The kiosk should include provisions for mounting a tablet/ipad and conduits. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 750mm x 250mm x 2100mm
2
-
-
... More
Provision and fixing of a kiosk as per the design. The kiosk shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The kiosk should include provisions for mounting TVs, conduits, and housing a server. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 1650mm x 900mm x 1900mm
2
-
-
... More
Provision and fixing of touch table kiosk as per the design. The kiosk shall be made of 12-18mm thick HDHMR/Flexiply and finished with PU Paint. The kiosk should include provisions for mounting LFD, IR Sensor, touch glass, conduits, and housing a server. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 2500mm x 750mm x 850mm
1
-
-
... More
Provision and fixing of touch table kiosk as per the design. The kiosk shall be made of 12-18mm thick HDHMR/Flexiply and finished with PU Paint. The kiosk should include provisions for mounting screen on front wall and touch tv on counter top, conduits, and housing a server. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 1050mm x 850mm x 2100mm
1
-
-
... More
Provision and fixing of led pillars as per the design. The led pillar shall be made of 12-18mm thick HDHMR and finished with PU Paint/vinyl. The kiosk should include provisions for mounting screens on all four sides out of which one should be openable for servicing, conduits, and housing a server. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 750mm x 750mm x 2400mm
3
-
-
... More
Provision and fixing of letter cutout on 18-25mm thick HDHMR panels and finished in PU Paint. Item to include necessary hardware and accessories for mounting of the letters to achieve the desired look as per satisfaction of the engineer in charge.
4.1
-
-
... More
Provision and fixing of backlit 3d letters made out of various materials like acrylic, metallic frames, etc. The letters to have concealed led strip lights to ensure uniform distribution through out the front and sides. Item to include necessary hardware and accessories for mounting of the letters to achieve the desired look as per satisfaction of the engineer in charge.
1.6
-
-
... More
Provision and fixing of a cutout of map of India out of 18mm thick 12-18mm thick HDHMR panel finished in projection paint. Item to include necessary hardware and accessories for mounting of the cutout and finishing the edges with Pu Paint to achieve the desired look as per satisfaction of the engineer in charge.
4
-
-
... More
Provision and fixing of a multimedia wall structure made out of 12-18mm thick HDHMR panels along with backlit acrylic boxes and display cases along the wall displaying information using TVs, laser cut acrylic, vinyl graphics, etc. Item to include all necessary equipments and hardware required (excluding screens) to achieve the desired effect as per satisfaction of the engineer in charge.
23
-
-
... More
Providing and fixing of 18mm thick 12-18mm thick HDHMR panel cladding on straight/curved ms framework out of 50mm x 50mm sections and appropriate gauge at 600mm vertically/horizontally spacing and as where required for proper completion of job fixed to the wall by means of raul plugs/screws . The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes, fixing at all loations and levels etc. complete as per the instructions of Engineer-in charge.
950
-
-
... More
Provision and fixing of a 150mm high platform constructed with hardwood framework of appropriate size and thickness. The top and sides of the platform shall be covered with 19mm thick BWP (Boiling Water Proof) plyboard. The platform size will be measured in square meters (sqm). The platform should feature a smooth and even finish on all surfaces, with adequate cross-bracing and supports for stability. It should be floor-mounted with appropriate anchoring and include a non-slip surface for safety. The platform shall be finished in floor finish as per design. All materials and workmanship should comply with relevant industry standards and regulations. Item to include all necessary equipments and hardware required to achieve the desired effect as per satisfaction of the engineer in charge.
66.2
-
-
... More
Provision and fixing of a replica of post box cutout made out of 12-18mm thick HDHMR/Flexiply with appropriate framework and finished as per design. Item to include necessary hardware and accessories for mounting of the cutout and finishing the edges with Pu Paint to achieve the desired look as per satisfaction of the engineer in charge.
Overall Size (width x depth x height) : 400mm x 300mm x 1200mm
1
-
-
... More
Provision and fixing of a scaled replica of post box made out of 12-18mm thick HDHMR/Flexiply with appropriate framework and finished as per design. Item to include necessary hardware and accessories for mounting of the cutout and finishing the edges with Pu Paint to achieve the desired look as per satisfaction of the engineer in charge.
Overall Size (width x depth x height) : 400mm x 400mm x 1200mm
3
-
-
... More
Provision and fixing of acoustically transparent screen fabric with eyelets at all sides stretched with cotton twine and fixed to framework with acoustic treatment and covering the eyelets with edge profile in paint/laminate finish. The framework for projection screen to be made out of MS CRC pipe of appropriate size and thickness with hooks at regular intervals. Item to include all necessary equipments and hardware required to achieve the desired effect as per satisfaction of the engineer in charge.
96
-
-
... More
Provision and fixing of scaled realistic model of buildings made out of various materials like wood, paper, plastic, pop, etc. and finished as per design to match the existing building architecture. Item to include all necessary hardware and accessories required to achieve the desired effect as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 350mm x 350mm x 250mm
14
-
-
... More
Providing and fixing of artistic set as per design. Item to include finishing and furnishing the area with various props suitable with the theme, made out of various materials as per design. (Mannequins excluded in this item) Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
91.5
-
-
... More
Provision and fixing of scrim screen with MS frame along perimeter. The ms frame to be concealed/merged with surrounding to give an edgeless look to the screen. Item to include all necessary hardware and accessories required to achieve the desired effect as per satisfaction of engineer in charge.
2
-
-
... More
Provision and fixing of scroll cutout made out of laser cut 18mm 12-18mm thick HDHMR panel with vinyl finish on front surface and the edges to be finished in paint. Item to include all necessary hardware and accessories required to achieve the desired effect as per satisfaction of engineer in charge. Overall Size (width x height) : 1150mm x 1750mm
1
-
-
... More
Provision and fixing of Backlit Graphic Panel, also known as Silicon Edge Graphics (SEG), designed to be fixed to the floor/wall/ceiling for necessary support. The graphic panel shall be made of polyester fabric, providing an edgeless or frameless feel. The construction shall consist of a metal frame with a fabric material utilizing a UV printing process. A thin silicon beading shall be sewn around the edge of the printed graphic, which fits into a channel around the outside of the framing. The panel shall include a provision for a lightbox made of prelam perforated sheet with an arrangement of LED strip lights to achieve the desired brightness of the graphic. The bottom and top units should have a Lit line finish to illuminate the installation with the desired color of light. Frame of the outer body to be finished in powder coating / PU paint as per the design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
25.59
-
-
... More
Provision and fixing of a table with geometry as per design, made out of 12-18mm thick HDHMR and finished in veneer and PU paint as per design. The table should include provisions for mounting TVs, conduits, and housing a server. Item to include all necessary hardware and accessories required to achieve the desired effect as per satisfaction of engineer in charge. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 2100mm x 1050mm x 850mm
1
-
-
... More
Digitization and creating archival data for stamps/postcards/miniature sheets/sheetlets, etc including high resolution scanning and creating of a digital library for the item and capturing data including name, description, unique ID, size (length and width), etc. Item to include all material, labour, carriage in all leads complete as per satisfaction of engineer in charge.
5000
-
-
... More
Provision and fixing of mounting board for stamps/postcards/letters etc. consisting of multiple layers. The base layer of the mount shall be made out of archival paper of appropriate thickness. Item to include provision of clear inert film for stamps/postcards/letters and the mounting board. Item to include all necessary hardware and accessories required to achieve the desired effect as per satisfaction of engineer in charge. Dimensions may vary as per design requirements. Item to include all material, labour complete as per satisfaction of engineer in charge.
Overall Size (width x height) : 200mm x 150mm
4416
-
-
... More
Provision and fixing of pull out drawer type display unit set consisting of 6 display drawers. The display unit shall be made out of 12-18mm thick HDHMR and finished with veneer with polish as per design. Each display drawer shall be made out of 12-18mm thick HDHMR and 8mm thick clear toughened glass with provision for mounting stamps on both sides. The display area on both sides to be covered with fabric panels. Each drawer should have provision for lockable glass shutter which can be opened for mounting/replacing the displayed artifact. Item to include all necessary hardware and accessories required to achieve the desired effect as per satisfaction of engineer in charge. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size of each display drawer (width x depth x height) : 100mm x 900mm x 1200mm
Overall Size (width x depth x height) : 900mm x 1000mm x 2100mm
23
-
-
... More
Provision and fixing of a kiosk made out of 12-18mm thick HDHMR and finished in PU paint, geometry as per design. The kiosk should include provisions for mounting a TV, conduits, and housing a server. Item to include all necessary hardware and accessories required to achieve the desired effect as per satisfaction of engineer in charge. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 1300mm x 750mm x 850mm
1
-
-
... More
Providing and fixing of counter table made out of 12-18mm thick HDHMR and finished in 1.5mm thk laminate from all the exposed sides, edges to be finished with edge bending tape of similar shade. The item shall be Inclusive of all hardwares and storage pedestal as specified in design. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads complete to the satisfaction of engineer in-charge.The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope. Quantity to be measured in width of the table.
Overall Size (depth x height) : 750mm x 850mm
8.6
-
-
... More
Providing and fixing of counter table made out of 12-18mm thick HDHMR and finished in 1.5mm thk laminate from all the exposed sides top to be finished in 6mm thk solid acrylic surface, edges to be finished with edge bending tape of similar shade. The item shall be Inclusive of all hardwares and storage pedestal as specified in design. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads complete to the satisfaction of engineer in-charge.The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.
Overall Size (width x depth x height) : 2400mm x 750mm x 1050mm
1
-
-
... More
Providing and fixing of counter table made out of 12-18mm thick HDHMR and finished in 1.5mm thk laminate from all the exposed sides top to be finished in 6mm thk solid acrylic surface, edges to be finished with edge bending tape of similar shade. The item shall be Inclusive of all hardwares and storage pedestal as specified in design. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads complete to the satisfaction of engineer in-charge.The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.
Overall Size (width x depth x height) : 2400mm x 750mm x 1050mm
10.7
-
-
... More
Provision and fixing of an interactive table based on rfid mechanism. The table shall be made out of 12-18mm thick HDHMR with appropriate framework and fnished in PU paint. The top part of the table shall be divided into segments, the periphery to have provision for placing miniature models with concelaed rfid cards and the centre part of the table top is to be raised with a rfid reader concealed in it. Item to include necessary conduiting, miniature models and hardware required complete as per the satisfaction of engineer in charge.
Overall Size (width x depth x height) : 1200mm x 1200mm x 1050mm
1
-
-
... More
Provision and fixing of a sleek frame to conceal a 86" tv and its mounts and accessories. The frame to be made out of 12-18mm thick HDHMR and finished in veneer with polish. Item to include necessary conduiting, miniature models and hardware required complete as per the satisfaction of engineer in charge.
2
-
-
... More
Provision and fixing of a table as per the design. The table shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The table should include provisions for charging and storing a VR headset. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, complete as per satisfaction of engineer in charge.
Overall Size (width x depth x height) : 600mm x 400mm x 850mm
2
-
-
... More
Providing a curator for the National Postal Museum during the O&M period for 60 months for day-to-day museum related works, coordination with Department of Post, collaborating with specialists for exhibits and artefacts detailings, planning events and exhibitions, outreach activities for awareness, providing information to the visitors and handling administrative work etc. and any other key responsibility as per requirement of DOP.
60
-
-
... More
Providing a history expert for the National Postal Museum during the O&M period for 12 months for content research in the museum, coordination with Department of Post etc. and any other key responsibility as per requirement of DOP.
12
-
-
... More
Providing a product designer for the National Postal Museum during the O&M period for 60 months for design of souvenirs and takeaways in the museum and any other key responsibility as per requirement of DOP. Min Experience : 4 Yrs.
Graduate from NID,IIT or other prestigious design institute.
60
-
-
... More
Operation and Maintenance of all the hardware, software, fitouts and other related facilities for 2 persons and content updation etc. as required for 60 months.
60
-
-
... More
Supply, Installation, Testing & Commissioning of X-ray Baggage Inspection System (X-BIS) equipment including control table as per technical specification. Tunnel Size : 640(W) ×500(H) mm, Conveyor Speed: 0.22m/s, Conveyor Max Load: 170 kg, Leakage radiation: 0.1μGy/h, Single inspection dosage: 1.0 Gy/h, Wire Resolution: 40AWG, Steel Penetration: 36mm, Film Safety: For ISO 1600. X-Ray having following details: Beam Direction: Upward; Tube Current: 0.6mA; Anode voltage: 160KV; X-ray divergence angle: 80 °; Cooling: Sealed oil bath with forced air; Sealed oil bath with forced air/100%; Detector: L-shaped Array. Operating environment: Power Requirement: 220V AC (±10%) 0±3Hz, Power consumption: 1.0KW (Max), Noise level: 58dB, S patial R esolution: 1.0mm Horizontal and, Vertical Operating temperature/humidity: 0 deg.C. ~ 45 deg.C /20% ~ 95% (Non-condensing); Storage temperature/humidity: -20degC ~ 60degC/20% ~ 95% (Non-condensing)
1
-
-
... More
Supply, Installation, Testing & Commissioning of 9-Zone Door Frame Metal Detector (DFMD) equipment of external size 870x2165x278mm (WxHxD) and internal size 720x2017x278mm (WxHxD), working on electromagnetic principles, made of ABS raw materials, frequency 0-100 Hz, Working humidity : 99%, non-condensing, Working temperature : -20°C-65°C, Input : AC 100 V-240 V/ Frequency 50HZ-60HZ, IP rating : 54 - [Dust proof coating], Sensitivity adjustable : 0 - 400, Volume adjustable : 0 - 50, Alarm volume : 0 - 3 sec, Alarm tones : 15 different tone, Detection : Ferrous metals 75gm as per technical specification.
2
-
-
... More
Provision and fixing of frisking booth including but not limited to canopy, female frisking booth, cloak room shelves, frisking table, revolving chairs, frisking pedestals etc. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
1
-
-
... More
Supply, Installation, Testing & Commissioning of Hand-Held Metal Detector (HHMD) equipment as per technical specification. Working frequency: 0~25 KHz; Net weight: ~400 gms; Power supply: Standard 6F22/15F8H; 9V battery or rechargeable battery; Temperature: -15℃ to +55℃; Detection Range: Pin : 25—70mm ; Type 64 pistol: 0—350mm; Six- inch dagger 200—300mm; 20mm diameter steel balls 150mm; One ₹ coin 120—180 mm； TF card, staples, 8-pin chip 10—40 mm. Having Two alarm modes: audible and vibration mode, high-brightness LED light indicator. Rugged, impact, free-fall drop height of 2 meters without damage. Light weight, large detection area fast detection speed. Continuous alarm function with low sound or vibration at the same time. After installing the rechargeable battery, it can be plugged directly into the original charger to charge.
2
-
-
... More
Design, provision and fixing of landscape elements including but not limited to landscape elements like benches, plants, groundcover, ornamental plants, drainage provision, landscape lighting, etc. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
1
-
-
... More
Complete repair work of elements of site (under scope) including repairing of exterior floor finishes, boundary walls, dismantlling of unwanted elements or elements to be replaced and provision and fixing of additional equipments for fire fighting, drainage, plumbing, electrical work, etc. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
1
-
-
... More
Provision and fixing of elements of site (under scope) including railing, entry gate (pedestrian), boom barriers, table top, exterior llighting, artwork paint, flooring with sandstone, stamped concrete, exterior signages, chainlink barriers, etc. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
1
-
-
... More
Design, provision and fixing of a toilet block with 3 male, 2 female and 1 accessible toilet including necessary infrastructure like urinals, storage tank, wash basins, etc along with set of two drinking water station. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.
1
-
-
... More
Development, Installation, Integration, Testing, Commissioning of feedback kiosk application to receive and store input from stylus/keypad. Quantity to be measured per interface/exhibit.
1
-
-
... More
Development, Installation, Integration, Testing, Commissioning of holobox software including creating an AI avatar and allowing the visitor to interact using camera/microphone/text. Quantity to be measured per interface/exhibit.
1
-
-
... More
Development, Installation, Integration, Testing, Commissioning of interactive kiosk application. Quantity to be measured per interface/exhibit.
24
-
-
... More
Development, Installation, Integration, Testing, Commissioning of logistics game software to receive input from miniature models. item to include game development. Quantity to be measured per interface/exhibit.
1
-
-
... More
Development, Installation, Integration, Testing, Commissioning of mirroring software to mirror content from VR headset to a screen. item to include game development. Quantity to be measured per interface/exhibit.
1
-
-
... More
Development, Installation, Integration, Testing, Commissioning of
Museum Management Software (MMS) - status and health monitoring of all servers. nodal management, control of all shows
Content Management System - update of content through MMS for all exhibits
Audio Guide in sync with all exhibits - Audio Guides should sync with the video/audio being played in exhibit
1
-
-
... More
Development, Installation, Integration, Testing, Commissioning of Common Services game software to receive input from simulator. item to include game development. Quantity to be measured per interface/exhibit.
2
-
-
... More
Development, Installation, Integration, Testing, Commissioning of a software to receive input from touch screen and display media through projection. Quantity to be measured per interface/exhibit.
1
-
-
... More
Supply, Installation, Testing & Commissioning of Software to play video via multi-server setup on projection screen having capability of integrate with mapping software. The video should be seamless without any flicker when the loop repeats.
7
-
-
... More
Development, Installation, Integration, Testing, Commissioning of a software to receive input from floor mounted buttons and display media on screen. Quantity to be measured per interface/exhibit.
2
-
-
... More
Development, Installation, Integration, Testing, Commissioning of a AI selfie mirror software. Quantity to be measured per interface/exhibit.
1
-
-
... More
Development, Installation, Integration, Testing, Commissioning of logistics game software to receive input from miniature models and display content on screen. item to include game development. Quantity to be measured per interface/exhibit.
1
-
-
... More
Development, Installation, Integration, Testing, Commissioning of make your own stamp software to receive input from miniature models and display content on screen. item to include game development. Quantity to be measured per interface/exhibit.
1
-
-
... More
Development, Installation, Integration, Testing, Commissioning of Software to manage the overall ticketing system and the automated ticket gates architecture. It is to build an overall ticketing system, that has to be integrated with the Ticket vending machine, Turnstiles, Website, App or any other way as decided in a seamless and hassle-free manner.
1
-
-
... More
Development, Installation, Integration, Testing, Commissioning of video on loop application. Quantity to be measured per interface/exhibit
45
-
-
... More
SITC of Multichannel Digital Network Based Power Amplifier with 300W - 350W or more per channel @ 8 Ohms power output; should have four or more inputs and outputs analog audio channels; should support 70Vrms and 100Vrms for all output channels; THD 0.35% orbetter; Should support Cooling Continuously variable speed forced air; Voltage Gain 34dB ormore; Digital audio bus compatibility up to 8 or more audio channel; Should have bridgeable channels even for 100Vrms mode to operate with 200Vrms output; 2digital audio bus RJ45 port, 1 Ethernet R 45 port for monitoring and configuration; Should have DSP features incl. Limiters , Input/output EQ , Delay ,Matrix Mixer ,Speaker Line Monitoring; Damping Factor 1000 or more; etc.
3
-
-
... More
SITC of Eight Channel Digital Network Based Power Amplifier with 300W - 350W or more per channel @ 8 Ohms power output; should have Eight or more inputs and outputs analog audio channels; should support 70Vrms and 100Vrms for all output channels; THD 0.35% orbetter; Should support Cooling Continuously variable speed forced air; Voltage Gain 34dB ormore; Digital audio bus compatibility up to 8 or more audio channel; Should have bridgeable channels even for 100Vrms mode to operate with 200Vrms output; 2digital audio bus RJ45 port, 1 Ethernet R 45 port for monitoring and configuration; Should have DSP features incl. Limiters , Input/output EQ , Delay ,Matrix Mixer ,Speaker Line Monitoring; Damping Factor 1000 or more; etc.
3
-
-
... More
SITC of Four or more Buttons Ethernet enable Wall Mount Controller; Should support PoE (Power Over Ethernet); 4 or more Programmable Buttons (Multicolored); Capable to trigger any DSP logic; Multicolored 1 Programmable 64x128 Pixel LCDs; Sleep Function; Security: Remote Lock/Unlock and Local Unlock via PIN Entry; Should have knob and capable to control 4 zones separate; Should be from same OEM of supplied DSP Unit(s) to avoid any compatibility issue(s); etc.
2
-
-
... More
SITC of Network Enable Wall mount Keypad Controller with 8 -10 Buttons; Should have PoE (Power Over Ethernet) port; Should have 8 - 10 Programmable Buttons (Multicolored); Capable to trigger any DSP logic; Multicolored 2 Programmable 64x128 Pixel LCDs; Sleep Function; Security: Remote Lock/Unlock and Local Unlock via PIN Entry; Should have knob and capable to control 8 zones separate; Should be from same OEM of supplied DSP Unit(s) to avoid any compatibility issue(s); etc.
3
-
-
... More
Integration of Audio equipments to respective servers. Item includes all accessories required to integrate all speakers and subwoofers including controllers, cables, equipment racks, etc complete as per satisfaction of engineer in charge.
1
-
-
... More
Supply Installation Testing & Commissioning of Compact CPU with following specification: Processor intel core i7, 500GB SSD, 16GB DDR4 RAM
34
-
-
... More
Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, Latest Generation, 500GB SSD, 32GB DDR4 RAM & 16 GB GPU to drive required HDMI output
8
-
-
... More
Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, 13th Generation, 500GB SSD, 16GB DDR4 RAM & 4 GB GPU to drive required HDMI output.
37
-
-
... More
Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, 12th Generation, 500GB SSD, 16GB DDR4 RAM & 8 GB GPU to drive required HDMI output
11
-
-
... More
SITC of 12 x 8 Networked Digital Signal Processor With AEC; Should have 12 ormore floating AEC in group of 4 or more Channels; DSP with 12 inputs and 8 outputs or more; 12 Control Inputs and 6 Logic Outputs for GPIO Integration; 48V phantom power on all analog inputs; THD: 0.01% 20Hz to 20KHz; Crosstalk: -75dB orbetter; Open architecture software configurable; Separate logic processing power; 2 digital audio bus RJ45 Port; 1 Ethernet port for Monitoring and configuration; Capable to handle +5V unloaded logic output voltage; Should have speech sense engine; Capable to control 3rd party devices with TCP IP and RS232; Should have 1nos of RS 232 port for integration with control System; Should have Bi-Directional Locate Functionality; Should have 48 or more digital audio Channel Bus; Should have monitoring LED for COM, STAT, ERR and PWR; etc.
2
-
-
... More
Supply Installation Testing & Commissioning of floor mounted buttons to send response to server when a person stands on it. The button should be durable to withsstand the load of a person and should be operational for users of different age group. Item to include integration of the button with server and fixing into existing platform as per design intent.
8
-
-
... More
Supplying, Installation, testing & commissioning of a wired headphone with following specs:Personalized 360 Spatial SoundOpen-air, dynamicWearing - Circum AuralSensitivity - 92 dB/mWFrequency response - 10 Hz - 20,000 HzImpedance - 35ohm(1kHz) Cable Length - 1.2m, gold-plated 4 pole mini plugWeight =300gm
2
-
-
... More
Supply Installation Testing, & commissioning of a holobox comprising of 86 inch or bigger screen size, with in built server.
1
-
-
... More
Supply, Installation, Testing and comminssioning of an ipad and ipencil with charging provision. 10.2" display, 64 GB ROM, 2160 x 1620 Pixels resolution, wifi only.
2
-
-
... More
Supply Installation (flat/curve), testing & commissioning of Micro LED video wall along with processor with pixel pitch of 1.2mm or less , 500 nits or more brightness. Any cables, graphic processor, accessories required for installation and connection of display cable to the server room should be included in the cost.
6
-
-
... More
Supply Installation, testing & commissioning of hemispherical Micro LED video wall of 1200mm dia with upto 10 percent variation along with mounting structure and processor with pixel pitch of 2mm or less , 500 nits or more brightness. Any cables, graphic processor, accessories required for installation and connection of display cable to the server room should be included in the cost.
2
-
-
... More
Supply Installation Testing, & commissioning of Videowall Panel Size 55 inch with Resolution of 1920 x 1080 (FHD) Brightness 500 cd/m2 or above, Contrast ratio 1100:1 & Dynamic / Mega 500,000:1,Bezel to Bezel 0.88mm GAP or less Viewing Angle (H x V) 178 x 178 , Orientation Portrait & Landscape with required hardware and accessories as per design and drawing with extension to connect display interface to the server.
12
-
-
... More
Providiing and fixing of IR Touch sensor with 8mm thick clear toughened glass. Touch sensor to cover area of 6 LFDs of 55 inch screen size in 2rows x 3 columns in landscape configuration.
1
-
-
... More
Projection Mapping of the projectors in all multiprojector setups. Quantity to be measured per projector in the setup.
15
-
-
... More
Supply, Installation, Integration, Testing, Commissioning of projection mapping license.
8
-
-
... More
SITC of Desktop Based Dynamic Gooseneck Microphone with ON/OFF button; Should Support Polar Pattern Cardioid or better; Frequency bandwidth 155-15000Hz ormore; Sensitivity 2.2 mV/Pa (–54 dBV) orbetter; Max. SPL for 1 % THD: 133 dB or more; Equivalent noise level (IEC 60268-4): 21 dB-A; Signal/noise ratio (A-weighted): 73 dB; Impedance: 530 ohms or more; Connector: 3-pin male XLR; etc.
1
-
-
... More
Supply Installation Testing & Commissioning of Monitor of 16 inch, Full HD resolution.
8
-
-
... More
SITC of PoE Injector for above wall mount button panel GUI interface. It has to be supplied by same OEM of above requested control processor to avoid any compatible issue(s) during installation and/or post installation; etc.
5
-
-
... More
SITC of 1-chip DLP LASER Phosphor Multimedia Projection system having, Min 9600 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3D ready, 3000000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Min offset Vertical +/- 100% Horizontal +/- 50%, Motorised zoom and focus, alongwith 0.65-0.75 lens & projector mountin bracket etc. complete with installation as per the site requirement.
15
-
-
... More
SITC of Two Way Ceiling speaker with 6.5" - 8.0" LF Driver; Should have Frequency Range 65Hz–19kHz orbetter; Should have 6.5" - 8.0" orbetter high output LF driver and 0.75" - 1.0" tweeter; Should have continuous Program Power rating 100W - 200W or more; Impedance 8 Ohms; Should have Conical Coverage 110° - 120° ormore; Should have Multiple Transformer Taps incl. 30W or better @ 70V or 100V; Should have Rated Maximum SPL 115dB - 118dB or better; etc.
24
-
-
... More
SITC of Two Way Ceiling speaker with Extended Bass; Should have 6.5" - 8.0" LF Driver; Frequency Range 56Hz–20kHz orbetter; Should have 6.5inch ormore high output LF driver and 1.0inch ormore HF Driver; Should be Power rating (PROG) 150W orbetter; Impedance 8 Ohms; Should have conical Coverage 120° - 130° ormore; Should have mmultiple Transformer Taps including 60W, 30W, 15W @ 70V or 100V; should have PEAK Maximum SPL 115dB orbetter; etc.
16
-
-
... More
SITC of Two Way 3.0inch - 4.0inch LF, Ultra-Compact Wall Loudspeaker for indoor & outdoor uses with Frequency Range 72Hz–19kHz ormore; Power rating 40Watts - 50Watts Continuous or more; Max SPL (pk) 109dB or better; Should have 70/100V Transformer taps 15W, 7.5W, 3.7W ormore; 100-120 degree (H) x 100-120 degree (V) orbetter coverage; etc.
1
-
-
... More
Supplying, Installation, testing & commissioning of 88 inch stretch LCD -Back Lit LED, Landscape & Vertical Support. Price to be inclusive of accessories, mounting, cabling etc.
12
-
-
... More
SITC of 8.0inch - 10.0inch In-Ceiling Subwoofer with Frequency Range 43Hz-195Hz orbetter; 180 degree ormore conical coverage; Max SPL 115dB or more; Should support Transformer Taps at 70V/100V for 75W, 30W, 15W or more; etc.
1
-
-
... More
SITC of In-Ceiling Subwoofer with 8"- 10" woofer; Should have Frequency Range 33Hz-298Hz orbetter; Should have continuous program power 200W - 250W ormore; Should have Max SPL 121dB - 124dB or more; Should have multiple Transformer Taps incl. 80W at 70V/100V; etc.
4
-
-
... More
Supplying, Installation, testing & commissioning of 22 inch LED, Resolution 1,920 x 1,080 (FHD), Touch IR, Brightness - 250 nits or Higher with extension to connect touch & display interface to the server.
15
-
-
... More
Supplying, Installation, testing & commissioning of 55 inch or more LCD -Back Lit LED,Resolution-1920*1080 (FHD), Touch IR, Landscape & Vertical Support ,Brightness - 500 nits or Higher with extension to connect display interface to the server.
2
-
-
... More
Supplying, Installation, testing & commissioning of 65 inch LCD -Back Lit LED, Resolution 1,920 x 1,080 (FHD),Built in Touch IR/Inglass/Capacitive/Incell, Brightness - 350 nits or Higher, with extension to connect touch & display interface to the server.
8
-
-
... More
Supplying, Installation, testing & commissioning of 86 inch or more LCD -Back Lit LED, Built in Touch IR/Inglass/Capacitive/Incell, Resolution-3840*2160 (UHD), Landscape & Vertical Support ,Brightness - 500 nits or Higher with extension to connect display interface to the server.
1
-
-
... More
Supplying, Installation, testing & commissioning of 86 inch or more transparent LED screen, Resolution-3840*2160 (UHD), Landscape & Vertical Support ,Brightness - 500 nits or Higher with extension to connect display interface to the server.
4
-
-
... More
Supplying, Installation, testing & commissioning of 32 inch or more LCD -Back Lit LED,Resolution-1920*1080 (FHD), Landscape & Vertical Support ,Brightness - 250 nits or Higher with extension to connect display interface to the server.
1
-
-
... More
Supplying, Installation, testing & commissioning of 55 inch or more LCD -Back Lit LED,Resolution-3840*2160 (UHD), Landscape & Vertical Support ,Brightness - 500 nits or Higher with extension to connect display interface to the server.
13
-
-
... More
Supplying, Installation, testing & commissioning of 65 inch or more LCD -Back Lit LED,Resolution-3840*2160 (UHD), Landscape & Vertical Support ,Brightness - 500 nits or Higher with extension to connect display interface to the server.
21
-
-
... More
Supplying, Installation, testing & commissioning of 86 inch or more LCD -Back Lit LED,Resolution-3840*2160 (UHD), Landscape & Vertical Support ,Brightness - 500 nits or Higher with extension to connect display interface to the server.
11
-
-
... More
Supplying, Installation, testing & commissioning of 98 inch or more LCD -Back Lit LED,Resolution-3840*2160 (UHD), Landscape & Vertical Support ,Brightness - 500 nits or Higher with extension to connect display interface to the server.
2
-
-
... More
Supplying, Installation, testing & commissioning of high-quality VR Headset with mirroring capability on to any display device with HDMI Input. Any Hardware required to achieve the mirroring shall be included in this cost.
10
-
-
... More
SITC of a 4K Ultra-HD Webcam with a resolution of 3840x2160 pixels, featuring motorized pan/tilt functionality, an integrated microphone with beamforming elements, and a full-range speaker. The webcam should come with an integrated table stand/wall mount, clip mount stand, and all necessary hardware and accessories as specified in the design and drawings. Additionally, provide an extension to connect the webcam to the server.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%