Delhi Urban Shelter Improvement Board Tender

Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. (a)Upto 35 sqmm (DSR 2016)

Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on wall surface as required. (a) Upto 35 sqmm (clamped with 1 mm thick saddle.) (DSR 2016)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal)

Supplying and fixing of following rating, four pole, 415 volts , isolator in the existing MCB DB complete with connections, testing and commissioning etc.as reqd. (a) 63Amp DSR -2016

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amp (DSR 2016)

Earthing with GI Earth pipe 4.5 longx40mm dia i/c accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) complete as reqd. (DSR 2016)

Providing and fixing 25mm x 5mm G.I strip in 40 mm dia G.I pipe FRLSon earth electrode including connection with G.I nut ,bolt spring washer excavation and re-filling etc . As reqd.

Providing and fixing 25mm x5mm G.I strip on surface or in recess for loop connection etc as reqd.

P/F 6 SWG dia GI wire on surface or in recess for loop earthing along with existing surface/recessed conduit /submain wiring /cable as required. (DSR 2016)

Fabricating , Supplying & Fixing of wiremesh protection frame work around SHM above the ground level having three panels & one door Fabricated with 40x40x6 mm thickness angel iron Frame and Tee iron 40x40x6 mm thickness in centre of frame including providing and fixing wire mesh of section 75x25 mm of 8 swg and shall be fixed with 25x3 mm thickness MS flat in frame. i/c grouting of frame in ground with miminmum 4nos of footing of 1:2:4 CC. All the panels must be welded or fixed with suitable arrangement of nut bolts with each other and all frame work is to be painted with 2 or more coats of red oxide primer and 2 coats of synhetic enable paints.

Fabrication, supplying, installation and commissioning of outdoor hut type cubicle feeder panel of minimum size 1x1 mtr. and depth not less than 45 cm, made out of M. S. sheet 2mm. thick ( 14 SWG) duly compartmentalized having 4 strip bus bar of 100 Amp. Capacity double door with locking arrangement for protection from rain, dust, proper ventilation system for heat dissipation , duly fixed on MS angle iron frame work of size 25x25x5mm.(NS) 90 cm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 20mm ) and having following accessories mounted inside the cubicle panel Bakelite sheet 6 mm i/c connection , inter with aluminum thimbles , earthing with two nos. earth studs duly painted with one coat of red oxide & two coats of superior quality enamel paint complete etc. as reqd. A). Fixing of following accessories in the existing cubical panel board/feeder pillar including connection testing etc. as reqd. B). Energy supply meter – 1 nos. C). Street light panel – 1 nos. D). ELCB four pole etc. -1 nos.

Les rebate on Old unserviceable material i.e fittings, panel etc. (-)