Delhi University Tender

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps, bolts , nuts etc. and required. (1200mm x 400 mm x 400 mm with in and out strenth for cable)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as reqd.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as reqd. (HO+DIP)

Providing and laying earth connection from earth eletrode with 6 SWG dia G.I. wire in 15mm dia G,I, pipe from earth electrode including connection with G.I. thimble excavation and re-filling as reqd.

Suplying & fixing of 200 watts LED flood light fitting 5700K pressured die cast housing with IP65 protection efficient high 220v-240v output emitter LED for better distribution with colour 6500 with lumens 16500 with all accessories etc as required at site(Make Philips Model BVP192 LED172 CW NB FG GR PSU) (Trilux, Thorn)

Suplying & fixing of following type steet lights fitting luminaire with efficacy 110 lumen/watt , pressure dia cast aluminium and heat resistance toughened flat glass complete with accessories having IP 65 protection with against dust and water & replaceable driver with 4 KV surge protection i/c making connections etc as reqd.(make Philips/Trilux, Thorn)

150 watt (Model BRP340 LED 175 CW HO SLC S2 PSU GR)

Supplying & fixing of street light pole box of size 8"x10"complete all accessories i/c suitable clamps brass screws,washers and 1 No SP MCB of 10 amps capacity, 4 way DMC stud cap terminal block i/c making connections etc as required (with 2 Nos. 32 mm x

Supply, Testing and commissioning of HOT dip galvanized octagonal steel pole of 5 mtr height made out of 3mm thick sheet PCD 200 mm, having bottom 130mm A/F & top 70mm A/F with built in connector box of size 500 mm length, M.S. base plate of size 200mm x 200mm x12mm thick, Single/ Double overhang GI bracket made of 3.60 mm thick M.S. pipe with 500 mm long top galvanized MS tube of suitable dia to accommodate the fitting on existing RCC foundation i/c S/F of 4 Nos. M-16 x 450mm long J Type (EN-8 grade) G.I. foundation bolts & nuts with 3 Nos. and 2 Nos. washer along with suitable size templates, making connections, interconnections with suitable size of copper wire with timble/lugs in the connection box, earthing, making numbering of pole etc complete as per drawing & technical specifications attached including following accessories mounted on inbuilt control box having flush cover with 2 Nos mounting strips with tapped holes (a) 6mm thick phjenolic laminated sheet/ bakelite sheet inside the window mounted on the existing mounting strips inside the flush door ( b) S/F of Teriminal block suitable for 16 sq. mm conductor 4 Nos. & shorting links - 5 Nos. on DIN Chneels (c) Terminal suitable for 6 SWG GI Wire/ 1.5 sq. mm wire (d) 6Amp SPMCB 10 KA 'C' Series - 1 No. i/c mounting on DIN Channel (Make : Bajaj/ Paruthi/ Surya)

Supplying, fixing and laying of one number PVC insulated and PVC sheathed/ XLPE aluminium conductor, armoured power cable confirming to 1.1 KV grade of following size direct in ground including excavation, sand cushioning protective covering refilling the same etc as required. 4x16 sq.mm

S/F 3x2.5 sqmm PVC sheathed copper conductor flexible wire i/c connection etc. as required.

S/F of 16 sqmm aluminium lugs i/c crimping connection testing etc. as required

Supplying and fixing of 40 mm HDPE pipe i/c excavation of CC road and making good the same etc. as required.

Dismantling the existing rusted MS pole fitting/ accessories and depositing the same at Engineering store.