Delhi University Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Costs
EMD
₹ 12,59,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_DU_821543_1Bid Award Id
ViewTender No
MOTILAL NEHRU COLLEGE /NIT/01_RecallTender Authority
Delhi University ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
EARTH WORK
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, any width and any area in plan) including getting out and disposal of excavated earth lead upto 200 m and lift upto 1.5 m, as directed by Engineer-in-charge.-All kinds of soil
1909.3
-
10
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to any and lift upto any
1640.8
-
10
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
322.5
-
10
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
89
-
10
Supplying chemical emulsion in sealed containers including delivery as specified. 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
978.3
-
10
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under Foundations using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
978.3
-
10
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, any width and any area in plan) including getting out and disposal of excavated earth lead upto 200 m and lift upto 5.0 m, as directed by Engineer-in-charge -- Hard Rock ( Blasting Prohibited) -- The quantities can be increased or decreased to any limit as per requirements at site
200
-
10
CONCRETE WORK
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
44
-
10
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
-
-
-
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
6
-
10
T1:3:6 (1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
6
-
10
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
61.5
-
10
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
6
-
10
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
61.5
-
10
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
106
-
10
R.C.C. Work
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.
251.1
-
10
Walls (any thickness) including attached pilasters, butteresses,
plinth and string courses etc.
190.1
-
10
Suspended floors, roofs, landings, balconies and access
platform
2461.6
-
10
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
2748.2
-
10
Columns, Pillars, Piers, Abutments, Posts and Struts
724.3
-
10
Stairs, (excluding landings) except spiral-staircases
205.7
-
10
Weather shade, Chajjas, corbels etc., including edges with water proof ply 12 mm thick
62
-
10
Extra for shuttering in circular work (20% of respective centering and shuttering items)
14.5
-
10
Shelves (Cast in situ)
17
-
10
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
311.5
-
10
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars.
236802
-
10
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Including Grooves/ drip course in Exposed RCC with neat fninishing in RCC itself using aluminum channels etc.
506
-
10
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).
--Concrete of M25 grade with minimum cement content of 350 kg /cum
2756
-
10
Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.--200 mm wide.
64
-
10
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall confirm to ASTM 6063).-- Floor joint of 100 mm gap
27
-
10
Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).---Wall joint of 100 mm gap
34
-
10
Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).---Roof Joint of 100 mm gap
37.5
-
10
BRICK WORK
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:---Cement mortar 1:6 (1 cement : 6 coarse sand)
60
-
10
Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks of class designation 12.5 in cement mortar 1:6 (1 cement : 6 coarse sand)in exposed brick work WITHOUT ANY MORTAR ON FACE OR FRONT EDGES OF BRICKS including making horizontal and vertical grooves 10 mm wide 12 mm deep RECESSED POINTING IN 1:3 Cement Mortar( 1 cement:3 Fine sand mixed with water proofing compound) complete. THE BRICK WORK CAN BE IN FLEMISH BOND, RAT-TRAP BOND OR ENGLISH BOND AS PER DRAWINGS--Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :--Cement mortar 1:6 (1 cement : 6 coarse sand)
279.9
-
10
Providing and filling AAC blocks including proper watering and compaction in sunken areas all complete as per drawings and as directed by the Engineer-in-chargein-Charge.
27
-
10
Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level.---Cement mortar 1:4 (1 cement :4 coarse sand)
77.6
-
10
MARBLE WORK
-
-
-
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for flooring, staircase treads , riers and landings, kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.--Granite of any colour and shade--Area of slab over 0.50 sqm
15.2
-
10
Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.--Granite of any colour and shade
15.2
-
10
Providing and fixing 25 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Kota stone window Sill
33.5
-
10
Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.
15.2
-
10
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polis
11
-
10
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
15.2
-
10
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.---Granite Stone of approved shade
3.5
-
10
WOOD WORK
-
-
-
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves, ALUMINIUM DOOR SHUTTERS OR ANY OTHER USE with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).---18 mm thick
110
-
10
Providing and fixing Door closer with link arm satin finish with SS screws for wooden doors of width upto 950mm of approved make and model all complete as per the directions of Engineer-in-charge
17
-
10
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
250x10 mm
52
-
10
200x10 mm
52
-
10
Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete.
-
-
-
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
125 mm
103
-
10
100 mm
10
-
10
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.---Twin rubber stopper
52
-
10
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc. complete ( best make of approved quality)
36
-
10
Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.
10
-
10
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead freeu PVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimumwall thickness of1.70 mm for Series R1 and R2 profilesand 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and designduly reinforced with minimum1.50 mm thick galvanized mild steel section made of required shape & size, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where everrequired) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required)shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in Charge.Wire mesh /Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note : Structural design proof checked from a Government Engineering Institute to be provided by the Manufacture for : (i) Sites with basic wind speed 45m/sec as per IS 875 -Part 3, (ii) Sites with structure height more than 20 m for all wind speeds
-
-
-
Three track, three panels sliding windo with Aluminium channel for roller track, wool pil, nylon rollers with SS 304 body---using R4 series with frame (115 mm and above) x(45 mm and above) and sash (44 mm and above)x(55 mm and above) with Zinc alloy (zamak) powder coated handle on two end panels along with multi point locking system. ( height above 1.8meter). B
360
-
10
Fixed window /Ventilator with mullion/transom
-
-
-
Using R1 series with frame (33 mm & above) x (35 mm & above) & mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre
25
-
10
Using R3 series with frame (55 mm & above) x (45 mm & above) & mullion (55 mm & above) x (65 mm & above). (Height upto 2.5 metre
21.5
-
10
Casement window double panels with fixed mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre).
18
-
10
Casement cum fixed panel window having one single casement panel & fixed panel with S.S 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles.
-
-
-
Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre; each openable shutter upto 0.8m width)
19
-
10
Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (55 mm & above) x (65 mm & above) & mullion (55 mm & above) x (65 mm & above). (Height upto 1.8 metre: each openable shutter upto 0.8m width)
12
-
10
Casement cum fixed panel window having single casement panel at both ends & middle fixed panel with S.S 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles.---Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & mullion (39 mm & above) (60 mm & above). (Height upto 1.2 metre; each openable shutter upto 0.8m width)
22.5
-
10
Casement door double panel with French (false) mullion with Zinc alloy (Zamak) 3D hinges , multi point locking system with Cylinder , Zinc alloy (Zamak) powder coated handles on both side---Using R4 series with frame (64 mm and above )x (55 mm and above) and sash (64 mm and above) x(100 mm and above)x (60 mm and above) (height above 2.5 meter)
33
-
10
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/ m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).
67.3
-
10
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999,tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/ m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all
complete as per direction of Engineer-in-charge (panelling to be paid for seperately).
67.3
-
10
Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.
5
-
10
Providing and fixing in position aluminum door fully panelled with 12mm thk. Novapan BSL and made up of extruded and anodised aluminium sections of approved make and of size 63.5 mm x 38.10 mm x 2.0 mm thk (wt. 1.054 kg/Rm) for outer frame, 47.62 mm x 10.16 mm x 1.74 mm thk (wt. 0.881kg/Rm) for top rail, 95.25 mm x 25.40 mm x 2.0 mm thk(wt. 1.519 kg/Rm) for bottom rail, 25.0 mm x 44.45 mm x 2.40 mm thk (wt. 0.918 kg/Rm) for lock rail, 47.62 mm x 44.45 mm x 1.8 mm thk (wt. 0.943kg/Rm) for shutter vertical hinges side, 47.62 mm x 44.45 mm x 1.95 mm thk (wt. 0.936 kg/Rm) shutter vertical latch side, clip weighing 0.097 kg/Rm including neoprene gasket, fixtures, fastenings and accesories like hinges, locking arrangement, door closer, tower bolts, handle etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodising must be scaleted by keeping the anodized section in boiling deanodized water for a period of one hour)
-
-
-
Door (1100x2100)
26
-
10
Door (750x2100)
90
-
10
STEEL WORK
-
-
-
Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer all complete
5232
-
10
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides an
-
-
-
80x1.25 mm M.S. laths with 1.25 mm thick top cover
3.6
-
10
Providing and fixing ball bearing for rolling shutters.
1.5
-
10
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge (area of grill to be measured).
0.4
-
10
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes
145
-
10
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. ---In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
600
-
10
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,
fasteners etc.).
471
-
10
FLOORING
-
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) ---25 mm thick
1749.9
-
10
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing
175
-
10
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
595.5
-
10
Extra above item 11.26 for Providing and fixing kota stone with rubbing and mirror polishing on Top of Parapets, Top of cills including, vertical face of tops and cills including making bird beak/ offset joint and providing weather groove/ drip course on
11
-
10
Providing weather groove/ drip course on the edge of Kota stone as per any design.
150
-
10
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 2.00 metre.
59
-
10
Providing and Laying Vitrified tiles in floor in different sizes ( Thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved brand and manufacture, in all colours and shade , laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 Coarse sand) jointing with grey cement slurry @3.3 kg /sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the Zero chipping Diamond cutter only. Laying of tiles will be done with the notch Trowel , plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily---Glazed Vitrified tiles Matt/Antiskid finish of Size - Size of tile 600x600 mm
192
-
10
Providing and fixing Ist quality Ceramic Glazed wall tiles size 600x1200mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
120
-
10
Grouting the joints of flooring tiles having joints of 3 mm width , using epoxy grout finish 0.70 Kg pf organic coated filler of desired shade (0.10 kg of hardner and 0.20 Kg of resin per kg) , including filling/Grouting and Finishing complete as per direction of Eingineer in Charge. Size of Tiles - Any size
192
-
10
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.---Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
553.5
-
10
Providing and fiixng 18 mm thick polished granite stone in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete.
283
-
10
Providing and laying Lapato finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
148.5
-
10
Providing and fiixng 18 mm thick Lapato finish granite stone in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with white cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete.
79.5
-
10
Providing and fiixing Delhi quartz stone cladding fixed on 20 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with grey cement slurry @ 3.3 kg/sqm including pointing with grey cement slurry admixed with pigment of matching shade including pointing with 1:3 Cement sand mortar etc. all complete in approved pattern as per drawings, and as directed by the Engineer-in-Charge.
110
-
10
ROOFING WORK
-
-
-
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :---In 75x75 mm deep chase
175.3
-
10
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
4
-
10
Providing and fixing precoated Galvalume (PPGL) profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1200
-
10
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
Gutter (600 mm over all girth)
60
-
10
Flashings/ Aprons.( Upto 600 mm)
56
-
10
North light curves metre
148.5
-
10
Barge board (Upto 300 mm)
61
-
10
Crimp curve sqm
148.5
-
10
Providing and fixing SS Bug screen of approved gauaze and wire thickness for external door and window
98
-
10
FINISHING
-
-
-
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
1801
-
10
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
628
-
10
Finishing interior and specified exterior wall/ RCC surfaces with Apex ultima water based paint of Asianpaint brand-2coats on one coat of trucare acrylic wall putty Asian paint brand - complete as per manufacturer's specifications, applying additional coats wherever required, to achieve even shade and colour.---Two or more coats on new work
3270
-
10
Finishing interior and specified exterior wall/ RCC surfaces with Apex ultima water based paint of Asianpaint brand- 2 coats on one coat of trucare exterior wall primer Asian paint brand - complete as per manufacturer's specifications---New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
615
-
10
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
615
-
10
Polishing wooden surface with melamine polish after sanding with sand paper no.180 , then 320, then applying 2coats of wood tech epoxy insulator then dent filling with wood tech filler then staining wood tech wood stains interiors by spraying and application of Melamyne. Finally applying wood tech PU luxury wood finish coating of Asian paints brand- Complete
11
-
10
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
115
-
10
ALUMINIUM WORKS
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) :---For fixed portion
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
60
-
10
Polyster Powder coated aluminium (minimum thickness of polyster powder coating 50 micron)
1144.6
-
10
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)---Polyster Powder coated aluminium (minimum thickness of polyster powder coating 50 micron)
732.6
-
10
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.---Pre-laminated particle board with decorative lamination on both sides
600
-
10
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) :---With float glass panes of 5.50 mm thickness
198.2
-
10
Providing and fixing 6mm thick toughened glass in Doors, windows and Ventilators including sealing with EPDM / Neoprene gasket all complete as per the architectural drawings and the directions of engineer-in-charge
30
-
10
Providing and fixing 8mm thick toughened glass in Doors, windows and Ventilators including sealing with EPDM / Neoprene gasket all complete as per the architectural drawings and the directions of engineer-in-charge
15
-
10
Providing and fixing Louver with 6mm thick frosted glass in windows and Ventilators including sealing with EPDM / Neoprene gasket all complete as per the architectural drawings and the directions of engineer-in-charge
11
-
10
Providing and fixing pre sealed Double glass panes 8mm glass +25 mm argon filled+8 mm glass ( Insulated Glass units ) as per ASTM E2190-19 Standard Specification for Insulating Glass Unit Performance and Evaluation
12.5
-
10
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.----Upto 8 mm depth and 8 mm width
200
-
10
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for
17
-
10
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.---Powder coated minimum thickness 50 micron aluminium tubular handle bar
52
-
10
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.---Powder coated minimum thickness 50 micron aluminium
28
-
10
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-incharge-----Powder coated minimum thickness 50 micron aluminium
103
-
10
WATER PROOFING
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry
140.4
-
10
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to
IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :----With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
545.4
-
10
PLUMBING ITEMS
-
-
-
Excavating trenches of required width for pipe, cables etc including excavation for sockets ,& dressing of sides ,ramming of bottoms ,for all depth including getting out the excavated soil,& then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming ,watering, etc and disposing of surplus excavated soil as directed, within lead of 50m. All kinds of soil. ---pipes cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia
213
-
10
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :----1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
32
-
10
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank
25000
-
10
Providing and fixing square-mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 150 x 100 mm size P type. With sewer bricks conforming to IS : 4885
3
-
10
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III): 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4coarse sand (zone-III): 8graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1ement: 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement :2 coarse sand :4 Graded stone aggregate nominal size ) finished with a floating coat of neat cement complete as per standard design---inside size 90x80 cm and 45 cm deep including C.I. cover with frame (Light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 KG ( weight of Cover 23 kg and weight of frame 15 Kg):---With common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5
4
-
10
Extra for depth of Manholes---Size 90x80 cm--With common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5
2
-
10
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design : 19.28.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
18
-
10
P/L NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of (1:2):
-
-
-
250 mm dia RCC pipe
46
-
10
300 mm dia RCC Pipe
166
-
10
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for rain water, Type-B as per IS13592 : suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:) i.e. bends, tees, junctions (with or without doors), reducers, couplers, cowls, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting,cutting of RCC slab as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. --The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.-Supreme/Prince make.--150 mm nominal dia
140
-
10
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste and vent, Type-B as per IS13592 : suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:) i.e. bends, tees, junctions (with or without doors), reducers, couplers, cowls, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting,cutting of RCC slab as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. ----The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.-Supreme/Prince make.---110 mm outer dia
490
-
10
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings including unions and reducers with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge . concealed work including cutting chases and making good the walls etc.,
-
-
-
20 mm nominal outer dia .Pipes.
512
-
10
25 mm nominal outer dia .Pipes.
74
-
10
32 mm nominal outer dia .Pipes.
78
-
10
50 mm nominal outer dia .Pipes.-From tank to shaft
-
-
-
Providing and fixing CPVC gate valve of approved quality
-
-
-
25 mm nominal bore
5
-
10
32 mm nominal bore
4
-
10
40 mm nominal bore
4
-
10
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore
5
-
10
P/F CPVC ball valve (gate valve) of approved make in CPVC pipes i/c cutting, chasing of, making it good and making all complete as per the directions of Engineer- in-charge.
-
-
-
50 mm nominal bore
5
-
10
32 mm nominal bore
6
-
10
25 mm nominal bore
6
-
10
20 mm nominal bore
-
-
-
Providing & Fixing Soap Dispenser with glass bottel as per direction of Engineer-in-Charge Code: AKP-35735P Jaquar
43
-
10
Providing and fixing CP grating of approved quality as per direction of Engineer-in-Charge.Circular type.100 mm nominal dia.
155
-
10
Providing and fixing Jaquar Wash Basin Aria ARS WHT 39903 Type:Table Top Colour:White Shape:Rectangle Dimensions:700 x 435 x 135 mm Item includes all accessories, piping, white cement, sundries , brackets etc. Complete
49
-
10
Providing & fixing Wall-hung European type water closet with provision also of all accessories required for installation and testing (Brand- Hindware Catalogue no 20061 Star white wall mounted closet)
42
-
10
Providing & fixing Concealed Cistern with Chrome Plate Brand Jaquar/American Standards/Grohe. Item include all accessories plates etc.
42
-
10
Providing and fixing with all sundries health faucet ( hand shower
) Jaquar brand Range :Allied
Code :ALD-CHR-573 Description :Hand Shower (Health Faucet) with 8mm Dia 1.2 Meter Long Flexible Tube and Wall Hook.. Item includes all accessories, all type of piping,white cement, sundries
42
-
10
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.
waste fittings complete. Flexible pipe 32 mm dia Item includes all accessories, all type of piping,white cement, sundries
42
-
10
Providing and fixing 5.5 mm thk. Float glass Mirror mounted on S.S Studs
20
-
10
Providing and fixing Jaquar Artize Soap Dish Holder
Brass Chrome Plated Range
:Kubix Prime Code :AKP-CHR-35731P Description
:Soap Dish Holder . Item includes all accessories, all type of piping,white cement, sundries
42
-
10
Providing and fixing C.P. brass Bib Cock Jaquar brand Range :Aria Code :ARI-
CHR-39037 Description :Bib Cock with Wall Flange. Item includes all accessories, all type of piping,white cement, sundries
84
-
10
Providing and fixing Jaquar brand C.P. Long Body Bib Cock with Wall Flange, CODE : COP-CHR-107PM. Item includes all accessories, all type of piping,white cement, sundries
42
-
10
Providing and fixing CP Grating Square Grating, Size: 5"X5" SS304 Brand Onida Shape Square Material Stainless Steel Size 5" x 5"/6" x 6" Cat No 60/3025 Model No 5120/5121 125 mm nominal dia with 25 mm waste hole/without hole. Item includes all accessories, all type of piping,white cement, sundries
84
-
10
Providing and fixing Jaquar brand double Coat hook ACN-CHR-1161N Item includes all accessories, all type of piping,white cement, sundries
54
-
10
Providing and fixing Jaquar brand ACN-1121N Towel Ring Square. Item includes all accessories, all type of piping,white cement, sundries
27
-
10
Providing and fixing Sink pillar taps with swivel output as per CAT no. SOL-6357 GE.. Item includes all accessories, all type of piping,white cement, sundries
2
-
10
Angular stop cock Jaquar brand, Model No : Angular Stop Cock with Wall Flange, CQT-CHR-23059. Item includes all accessories, all type of piping,white cement, sundries
27
-
10
Floor trap Brand Chilly model no. Chilly-CCTL-SMHC-150. Item includes all accessories, all type of piping,white cement, sundries
54
-
10
Push Tap for urinal Jaquar, Model No : Pressmatic PRS077 G Urinal Valve with Auto Closing system with
65 mm Extension Body. Item includes all accessories, all type of piping,white cement, sundries
16
-
10
white viterous china large flat back / half stall urinal Jaquar-URS-WHT-
0706) (Make For Push Tap for Urinal : Jaquar, Model No : Pressmatic PRS077 G Urinal Valve with Auto Closing system with
65 mm Extension Body. Item includes all accessories, all type of piping,white cement, sundries--Floor drain Fixture included in PVC piping
16
-
10
Overhead shower Brand Jaquar model no.OHS-CHR-1759 180 mm dia round overhead shower alongwith shower arm and flange etc. Item includes all accessories, all type of piping,white cement, sundries
4
-
10
Concealed stop cock Jaquar Regular Concealed Stop Cock 20MM-089 ALD-CHR-089 and Jaquar exterior part Flr-chr-5083nk. Item includes all accessories, all type of piping,white cement, sundries
42
-
10
P/F CPVC union approved make CPVC pipes i/c cutting and making all complete as per the directions of Engineer-in-charge.. Item includes all accessories, all type of piping,white cement, sundries
-
-
-
50 mm nominal bore
4
-
10
32 mm nominal bore
4
-
10
Providing and fixing soil, waste and vent VERTICAL pipes in uPVC SWR pipings, working pressure 6.0 kg/ sq.cm. including all fittings , jointing (all types of traps, floor drains, bends, coupling, offsets, tees all of them with or without doors) . Length shall be measured from GT , Manhole to Cowl or Horizontal termination point without any extra allowance for fittings. . Item includes all types of chasing , core cutting, all accessories, all type of piping,white cement, sundries
-
-
-
110 mm Outer dia
96
-
10
Providing and fixing soil, waste and vent HORIZONTAL SLUNG pipes in uPVC SWR pipings , working pressure 6.0 kg / sq.cm including all fittings, jointing (all types of traps, floor drains,bends, coupling, offsets, tees all of them with or without doors) . The rates are inclusive of required Core cuttings in RCC members, chasing of all types, water proofing with 1:3 Cement sand Mortar with FOSROC water proofing Compund as / manufacturer's specifications of all thickness and dia. Length shall be measured from Start to End in a single horizontal line without any extra allowance for fittings.
-
-
-
110 mm Outer dia
324
-
10
ELECTRICAL ITEMS
-
-
-
Main Panel (All Block)---INCOMER---1 No. 300A 4P MCCB ,36 kA breaking capacity with thermal release and adjustable setting and with rotary handle.with ON/OFF/TRIP indication Lamps, MFM with Communication Facility along with control SP MCB--METERING & INDICATION---1 set of R,Y,B phase indicating lamps--1 set of ON/OFF/TRIP indication Lamps, MFM with Communication Facility along with control SP MCB--BUS-BAR---1 Set of 450A TPN Aluminium Bus Bar with colour coded PVC Sleeves--OUTGOINGS---1 Nos.200A FP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle---3 Nos.160A FP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle---6 Nos.63A FP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle---NOTE :- All starters shall have ON & OFF push button & suitable rating of contractor and overload relays---Supplying,Receiving, fixing, testing & commissioning of above described Panel
1
-
10
SWITCH CONTROL LIGHT POINTS
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.---Group C
300
-
10
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.:Group A
150
-
10
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
6
-
10
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC
insulated copper conductor single core cable in surface/
recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
750
-
10
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC
insulated copper conductor single core cable in surface/
recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
265
-
10
SWITCH CONTROL LIGHT POINTS
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1250
-
10
4x 10 sqmm+ 2x 6 sqmm earth wire
200
-
10
Supply & fixing of following sizes of medium class PVC conduit along with accessories in surface / recessed including cutting the wall & making good the same in case of recessed conduit as required.
-
-
-
25 mm dia.
150
-
10
32 mm dia.
150
-
10
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 Amp modular socket outlet and 15/16 A modular switch, connection etc. as required.
76
-
10
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
123
-
10
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)---4 way (4+12),Double door
3
-
10
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, onsurface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) ---8 way (4+24),Double door
8
-
10
Supplying & fixing 6 amps to 32 amps rating 240/415 volts C curve Miniature Circuit Breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.---Single Pole
180
-
10
Supply & fixing of single pole blanking plate in the existing MCB DB complete etc. as required
25
-
10
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
25 amps
2
-
10
40 amps
1
-
10
Supplying and fixing of following rating four pole 415 V MCCB in the existing MCCB DB complete with connections ,testing and commissioning etc as required.
-
-
-
63 amps
5
-
10
100 amps
2
-
10
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
10
Providing and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I.
pipe from earth electrode, as required.
38
-
10
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in
recess for connections etc. as required.
50
-
10
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as requied.
50
-
10
Supply, Installation, Testing and Commissioning of 10 W LED Bulk head Light - Supply of 10W LED bulkhead Surface mounted IP65 bulkhead LED fixture made up of pressure die cast aluminum housing with integrated power supply unit, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) ≥90 lumens/watt with Minimum system Lumens 900, Life of LED : 50000 burning Hrs. @ L70B50 Lumen maintenance, cool white color temperature (SDCM5), CRI 80, PF 0.95 & THD10%, an operating Voltage Range of 150 - 260 VAC.Minimum Internal Surge Protection 2.5KV As Trilux Optima IND G3 900-857 ET or equvalient.
6
-
10
Supply, Installation, Testing and Commissioning of 12W Surface Mounted LED circular Downlighter - Supply of Surface Mounted LED Downlight with cylindrical construction, Housing Dia 160 mm, height 110 mm, Luminaire luminous flux 1320 Lm, Maximum system Power 12W, Luminous efficiency of 110 Lm/W. CRI 80. Life of fixture 50000 hrs@ L70 Lumen maintenance, CCT 5700K, CRI 80, PF 0.95, and suitable for 230V AC, 50Hz. supply, Internal Surge Protection ≥ 2.5KV. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance, and LED driver shall be SELV & BIS registered & luminair manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer as Trilux Ambiella D Plus G4 Surface.
45
-
10
Supply, installing, testing & commissioning of Decorative Wall Light with 2 LT Ivory Fabric shade with 3W LED mild steel & Brass with Chrome finish, Fixture Height 405mm, Size (LXWXH) 155 X 280 X 405 mm and E14 base 7w Bulb or Eqivalent as per direction of E/I.
25
-
10
Supply installing, testing & commissioning of LED 4ft Batten with a nominal system lumen output of 4000 lumens and a minimum system efficacy of 110 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70B50. The luminaire should have a color temperature of 6500K/4000K and CRI80. The luminaire shall meet IP20 rating with THD 10% and PF 0.95. It should have a surge protection of 2.5kV. The luminaire housing should made of Polycarbonate housing with a diffuser.
400
-
10
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
123
-
10
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
2
-
10
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
75
-
10
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
80
-
10
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
100
-
10
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
2
-
10
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
60
-
10
Supply, Installation, Testing & Commissioning of Indoor Access Point solution should have integrated dynamic packet capture, WIPS, detection of rouge and honeypot Access Point detection, able to create WxLAN policies and the cloud controller should be scalable to handle around 5000 APs or more in future. Should be able to extend API to integrate with other systems as well. AP indoor 4x4 with 802.11 a/b/g/n/ac support. The solution should be artificial intelligence based self healing soltion.The solution should support Location Based services via Bluetooth low energy and should also support Asset Tracking if required in future without any change in Hardware. Should support upto 16 SSIDs per AP. Must be able to limit per SSID or per user based uplink or downlink bandwidth , as per detailed specification of management controller.
4
-
10
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required (for Connectivity of Hub room to End Point)
300
-
10
Supply, Installation, Testing and Commissiong of CAT6 information outlet (I/O) for camera at user end.
13
-
10
Supply, Installation, Testing and Commissiong of loaded 24 port CAT6 jack panel for CAT6 cable termination at rack end.
1
-
10
Supply, Installation, Testing and Commissiong of CAT6 patch cord 7 feet for information outlet (I/O) to end user device connectivity.
1
-
10
Supply, Installation, Testing and Commissiong of 1, 2 and 4 port face plate white for I/O fixing at user side.
15
-
10
Supply, Installation, Testing & Commissioning of 3 MP Bullet camera , ONVIF profile S ,G & T . UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.7 mm to 12 mm motorized varifocal lens , Quad stream with each stream support H.265+ compression simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,120 dB WDR , Compression : H.265+ ,H.265 ,H.264+ H.264 .SD card support , Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 fps@5MP , Edge analytics : line crossing , perimeter intrusion ,Face detection (deep learning) , pedestrian detection ,cross counting , stationary object , In built IR LED , IR Distance upto 50 meters , IP 67 , IK 10 housing , POE
13
-
10
Supply, Installation, Testing & Commissioning of 32 channel NVR , ONVIF compliant , recording bandwidth 640 Mbps , output interface 1 HDMI (up to 4K), 1 VGA , Alarm in/out :16ch in / 4ch out , 1 X RJ45 Ethernet , iOS smartphone support , 8 HDD support , each HDD slot support upto 8 TB HDD , RAID support , 1x3.0 USB for backup /upgrade , 2x 2.0 USB for mouse , Artificial Intelligence Support having face recognition with compatible deep learning supported cameras, AI-Face registered quantity upto 10,000 ,A.I maximum captured quantity 200,000. UL,CE,FCC certified
1
-
10
Supply, Installation, Testing and Commissiong of 6TB Surviellance Hard Disk.
1
-
10
Supply, Installation, Testing and Commissiong of Full HD 42" LED Professional Display Panel.
1
-
10
Supply, Installation, Testing & Commissioning of of Access Switch 24 Port POE+ Access Switches with switching capacity of 56 Gbps, forwarding performance 10 Mpps, having 8 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 370W and 2x 1G SFP+ uplink ports
1
-
10
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.---25 mm dia.
175
-
10
Supply, Installation, Testing and Commissiong of intelligent analog addressable photothermal detector complete with mounting base complete as required.---Below False Ceiling
175
-
10
MANUAL CALL POINT
-
-
-
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
6
-
10
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
6
-
10
FIRE ALARM CONTROL PANEL---Supplying, installation, testing & commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.-----Two Loop Panel.
1
-
10
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
3
-
10
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
1000
-
10
SPEAKERS
-
-
-
Supply of 1.5/3/6W metal box ceiling/wall speakers complete as required.
10
-
10
DIGITAL AMPLIFIERS--Supply of 1X500W Class-D Amplifier with 2 independent channels and can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection----250 Watts
250
-
10
Supply of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.----Speaker cable Two pair, 2-core, 1.5 sqmm
250
-
10
SPEAKERS
-
-
-
If there are any extra items which are not covered in items given above they shall be paid at a fixed percentage below or above DSR 2023 as per the percentage decided in the beginning. Please quote the net percentage rate in decimels here . For example if the contractor wants to quote 25% below DSR 2023 please fill 0.75 . So that
amount shall become Rs. 22,50,000/-
3000000
-
10
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements