Delhi University Tender
... More
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Delhi University - DU Tender
Civil And Construction
Building Construction
Eprocure
Opening Date5 Apr 2022
Closing Date26 Apr 2022
Tender Amount₹ 3,90,25,225
Costs
EMD
₹ 7,27,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_DU_682209_1Bid Award Id
ViewTender No
HRC/Build/Tender/2022-23/01Tender Authority
Delhi University ViewPurchaser Address
-Website
http://http://www.du.ac.in/du/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within College campus lead as per direction of Engineer - in- charge.
20
-
-
... More
Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work Note:-Quantity verified by college Engineer
1600
-
-
... More
Demolishing brick work with plaster & wall tile / without plaster manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within College campus lead as per direction of Engineer-in-charge. (No Extra payment will be paid of Plater & wall Tiles).
-
-
-
... More
In cement mortar
100
-
-
... More
Removing mortar from bricks and cleaning bricks including stacking within a lead of College campus (stacks of cleaned bricks shall be measured) : Note:-Quantity verified by college Engineer
-
-
-
... More
From brick work in cement mortar or in lime mortar
20
-
-
... More
Removing doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within College campus lead :
-
-
-
... More
Of area 3 sq. metres and below
1
-
-
... More
Of area beyond 3 sq. metres
20
-
-
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within College campus lead:
-
-
-
... More
Of area 3 sq. metres and below
40
-
-
... More
Of area beyond 3 sq. metres
2
-
-
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including with or without dismembering and stacking within College campus lead. Note:-Quantity verified by college Engineer
1000
-
-
... More
Dismantling tile work in floors, wall and roofs laid in cement mortar including stacking material within College campus lead.
-
-
-
... More
For thickness of tiles up to 40 mm
270
-
-
... More
Dismantling Kota/Mosaic Granite stone flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within College campus lead.
870
-
-
... More
Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within College campus lead.
800
-
-
... More
Demolishing mud phaska in terracing and disposal of material within College campus lead.
160
-
-
... More
Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within college campus lead.
5
-
-
... More
Dismantling and stacking within college campus lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of :
-
-
-
... More
R.C.C
10
-
-
... More
Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within College campus lead.
Note:-Quantity verified by college Engineer
50
-
-
... More
Dismantling cement asbestos/PVC or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within College campus lead.
35
-
-
... More
Dismantling C.I. / PVC or asbestos rain water pipe with fittings and clamps including stacking the material within College campus lead :
-
-
-
... More
Up to 150 mm dia pipe
130
-
-
... More
Dismantling G.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within College campus lead as per direction of Engineer-in-charge : Note:-Quantity verified by college Engineer
-
-
-
... More
15 mm to 40 mm nominal bore
40
-
-
... More
Above 40 mm nominal bore
25
-
-
... More
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within College campus lead as per direction of Engineer-in-charge:
-
-
-
... More
Up to 150 mm diameter
25
-
-
... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials College store and disposal of unserviceable materials within College campus as per direction of EIC.
10
-
-
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within College campus including lead as per direction of EIC.
100
-
-
... More
Removing under serviceable condition & refixing of existing Shed ( Size 2mx5m approx) including above existing electrical panels of seminar Hall complete in all respect with accessories like nuts, bolts or welded joints including fixing with suitable structural members, dash fastener, cutting hole and chases in walls, floor, R.C.C. beam etc, and making good the same, incluiding painting and fittings with one coat of primer and two coats of enamel paint complete as reqd. ( Note:- Vendor can visit the site before quoting this item)
1
-
-
... More
Removing & Refixing of Existing Fire Fighting system under serviceable condition and testing. Refix it inside the false ceiling of proposed porta cabin structure at existing Terrace Lvl. with jointing the complete Fire Fighting system including pipeing, water Tank, pump set, Air Visuel & Hydrant etc. complete in all respect conforming to IS & NBO Code with accessories like tees, elbows, flanged joints, rubber insertion, nuts, bolts or welded joints including fixing the pipe with suitable flat iron strip clamps/ brackets, structural members, dash fastener, cutting hole and chases in walls, floor, R.C.C. slab etc, and making good the same, including painting pipes and fittings with one coat of primer and two coats of red enamel paint complete as reqd. ( Note:- Vendor can visit the site before quoting this item)
1
-
-
... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge Note:- - While Chipping vendor should take all safety mearsure by keeping sand bags, props and MS Gali above the floor and cover doors, windows, Electrical Switch board & Smart board so that the Chipping work effect does not harm our existing under floor & roof , if required. NO extra payment will be made for this protection work.
-
-
-
... More
up to 75mm thickness
800
-
-
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, all loads including all lifts involved. Note:- Malba quantity is equal to dismantled material / items. No factor will apply in MB)
900
-
-
... More
Earth work
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, including all lead as per directorion of EIC and lift up to any depth disposed earth to be levelled and neatly dressed.
-
-
-
... More
All kinds of soil
350
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, any depth including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed by EIC of College .
-
-
-
... More
All kinds of soil
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
100
-
-
... More
Concrete Work
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level :
-
-
-
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) for flooring at Ground floor
40
-
-
... More
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
35
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centring, shuttering and finishing :
-
-
-
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
90
-
-
... More
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
20
-
-
... More
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
20
-
-
... More
Reinforced Cement Concrete Work
-
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
2
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is not payable/recoverable separately)
-
-
-
... More
All works up to plinth level.
40
-
-
... More
All works above plinth level up to floor V level.
110
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete.
70
-
-
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
30
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts.
260
-
-
... More
Edges of slabs and breaks in floors and walls. (Under 20 cm wide )
150
-
-
... More
Weather shade, Chajjas, corbels etc., including edges.
120
-
-
... More
Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12mm thick.
275
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12mm thick.
350
-
-
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 4.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured)
-
-
-
... More
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured).
50
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
-
-
-
... More
Thermo-Mechanically Treated bars.
22700
-
-
... More
Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand) including water proofing material in cement plaster work in proportion recommended by the manufacturers.
1325
-
-
... More
Providing and fixing sheet covering over expansion joints with iron screws as per design to match the colour / shade of wall treatment.
-
-
-
... More
Aluminium fluted strips 3.15mm thick.
-
-
-
... More
up to150 mm wide.
15
-
-
... More
Brick Work
-
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
70
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level including exposed brick work with making horizontal and vertical grooves 10 mm wide 12 mm deep all shapes and sizes in :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
185
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
... More
Cement mortar 1:4 (1 cement :4 coarse sand)
150
-
-
... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
150
-
-
... More
Granite / Wall Tiles
-
-
-
... More
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Basic Price :- Rs.250/-Sqft. (For wash rooms counter)
-
-
-
... More
Granite of any colour and shade
20
-
-
... More
Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
... More
Granite work.
450
-
-
... More
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
40
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of size (600x300mm) as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Make:- Kajeria/ Somany/ Asain/ Nitco/ orient. Basic Rate :- 60/Sqft.
680
-
-
... More
Wood work
-
-
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick same as existing as per Direction Engineer - in- Charge.
10
-
-
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 or 5.5 mm thick (same as existing) float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.
10
-
-
... More
Refixing existing wooden / panelled shutter in existing frame including all new accessories like hinges, sliding door bolt, tower bolt, cutting and fabrication of required size with necessary screws as per direction Engineer Incharge.
6
-
-
... More
Steel Work
-
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
18300
-
-
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
... More
Using M.S. angels 40x40x6 mm for diagonal braces.
5
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 – part 1 and M.S. top cover of required thickness for rolling shutters.
-
-
-
... More
80x1.25mm M.S. laths with 1.25 mm thick top cover.
4
-
-
... More
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete.
10
-
-
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
750
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (for payment purpose only weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.)
1700
-
-
... More
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
200
-
-
... More
Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used.
-
-
-
... More
With G.I. barbed wire
300
-
-
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m) having 50 nos rounds per 6 metre length, up to 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
60
-
-
... More
Flooring Work
-
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
... More
25 mm thick.
625
-
-
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. ( One Single piece will be used in Tread & riser of staircase.
35
-
-
... More
Rubbing and polish existing Kota stone flooring with grey cement slurry mixed with pigment to match the shade of the slab complete as per Direction Engineer-In- Charge.
800
-
-
... More
Providing and laying full body vitrified floor tiles (size 600x600mm) in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. (Make -Somany/ Kajaria/ Asian/Orient) Basic Rate :- 70/Sqft.
-
-
-
... More
Size of Tile 600x600 mm
230
-
-
... More
Providing and laying non- skid vitirified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. (For Toilet Block) (Make -Somany/ Kajaria/ Asian/Orient) Basic Rate :- 70/Sqft.
-
-
-
... More
Size of Tile 600x600 mm
115
-
-
... More
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
150
-
-
... More
Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement.
-
-
-
... More
18 mm thick.
15
-
-
... More
Providing and laying Tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc.complete as per direction of Engineer-in-Charge. Make- Nitco, Asain, Somany or equlivalent
200
-
-
... More
Providing and laying Flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Basic Rate :-Rs. 250/-Sqft.
-
-
-
... More
Flamed finish Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
180
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Basic Rate :-Rs. 250/-Sqft.
-
-
-
... More
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
225
-
-
... More
Roofing work
-
-
-
... More
Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete :
-
-
-
... More
Red sand stone slab
-
-
-
... More
40 to 50 mm thick
300
-
-
... More
Providing and fixing on wall face PVC rain water pipes conforming to IS : 13592 Type A including Tee, Band, coupler, Grating & jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
-
-
-
... More
160 mm diameter
100
-
-
... More
Providing and fixing Metal Tiled false ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metalgrid of hot dipped galvanized steel sections (galvanized @ 120gsm/sqm, both side inclusive) consisting of main T" runner withsuitably spaced joints to get required length and of size 24x38mm" joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge.
-
-
-
... More
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5mm thick with 8mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
60
-
-
... More
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground.
-
-
-
... More
For door/ window/ clerestory window.
1
-
-
... More
Finishing work
-
-
-
... More
15 mm cement plaster on rough side of single or half brick wall of mix : including water proofing material in cement plaster work in proportion recommended by the manufacturers.
-
-
-
... More
1:6 (1 cement: 6 coarse sand)
1050
-
-
... More
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) :
-
-
-
... More
Flush / Ruled/ Struck or weathered pointing.
450
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade
-
-
-
... More
Old & New work (two or more coats) over and including water thinnable priming coat with cement primer.
6000
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
... More
Old & New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
2050
-
-
... More
Washed stone grit plaster on exterior walls of height up to 10 metre above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size), in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge.
50
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
6000
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
... More
One or more coats.
400
-
-
... More
Sanitary Installation
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required (Rate:- Rs. 8,000/- per Set) : Make:- Hindware, Cera, Jaguar, Somany.
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid
14
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.
Rate:- Rs. 3000/- per Set : Make:- Hindware, Cera, Jaguar, Somany.
6
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required : (Rate:- Rs. 4500/- per Set) Make:- Hindware , Cera, Jaguar, Somany.
-
-
-
... More
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
10
-
-
... More
S.S Grab Bar (Handrails) of 35mm Dia may be provided in the handicapped Toilet for the support required for the movement of Wheel chair at the height of 750 MM from finish floor including all accessories fittings required for fixing as per Handicpped Toilet as per Direction Engineer-In-Charge.
3
-
-
... More
Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back under counter wash basin size 550x400 mm
Make:- Hindware Cera, Jaguar, Somany. (Rate:- Rs. 3800/- per Set)
19
-
-
... More
Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : Make:- Hindware, Cera, Jaguar, Somany.
-
-
-
... More
White Vitreous China Flat back under counter wash basin size 550x400 mm (Rate:- Rs. 4000/- per Set)
2
-
-
... More
Providing and fixing Waste Coupling 32mm Size Full Thread complete. Make:- Hindware, Cera, Jaguar, Somany.
31
-
-
... More
Providing & Fixing following toilet accessories complete as per following detail :-
Make:- Hindware, Cera, Jaguar, Somany.
-
-
-
... More
Concealed stopcock with long sleeve sliding cap (Basic rate Rs.700/-)
17
-
-
... More
Angular stop valve with wall flange ( Basic rate Rs. 750/-)
60
-
-
... More
15 mm diameter small body bib cock (Basic rate Rs. 500/-)
30
-
-
... More
High Flow Divertor body ( 2 way inlet) (Basic rate Rs.3500/-)
33
-
-
... More
Exposed part of HI flow Divertor ( 2 way inlet) Face plate (Basic rate Rs. 2500/-)
19
-
-
... More
Bath Tub Spout with wall flange (Basic rate Rs. 1200/-)
19
-
-
... More
Bottle Trap (Basic rate Rs. 650/-)
30
-
-
... More
Health Faucet / Jet (Basic rate Rs. 600/-)
14
-
-
... More
Towel Ring / cloth hager /clip
25
-
-
... More
Shower with arm casted (heavy) size :-150mm dia (Basic rate Rs.1500/-)
19
-
-
... More
CP Ext Pcs
25
-
-
... More
Trap Jali - 5" dia ( SS 304 grade)
90
-
-
... More
Toilet paper holder with flap (in S.S.)
20
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Flexible pipe - 40 mm dia
2
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with SS Stud & Bevel ege of approved make as per Direction Engineer-In-Charge.
Make:- Saint Gobain, Modi.
-
-
-
... More
Rectangular shape
20
-
-
... More
"Providing & fixing Ringfit / Pasting Type uPVC (Type-B) conventional system for Soil, Waste & Rain Water including Coupler, Bend, Tee, Single Y, Vent Cowl, End cap, Clip & testing of joints complete as per direction of Engineer in Charge. Make - Astral / Supreme / Prince / Prakash
-
-
-
... More
75 mm dia pipe
100
-
-
... More
110 mm dia pipe
350
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round of any size pipes (PVC/RCC/UPVC/HUME PIPE/ MS PIPE) of any diameter/size including bed concrete as per standard design:
450
-
-
... More
Water Supply
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall Make : Supreme, Prakash, Polycab Astral.
-
-
-
... More
15 mm nominal outer dia .Pipes.
20
-
-
... More
20 mm nominal outer dia .Pipes.
20
-
-
... More
25 mm nominal outer dia .Pipes.
100
-
-
... More
32 mm nominal outer dia .Pipes.
100
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. - Make : Supreme, Prakash, Polycab Astral .
-
-
-
... More
15 mm nominal outer dia .Pipes.
100
-
-
... More
20 mm nominal outer dia .Pipes.
100
-
-
... More
25 mm nominal outer dia .Pipes.
20
-
-
... More
32 mm nominal outer dia .Pipes.
20
-
-
... More
Making connection of CPVC / G. I. distribution branch with CPVC / G. I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : Make : Supreme, Prakash, Polycab, Astral ,
-
-
-
... More
20 to 40 mm nominal bore
20
-
-
... More
50 to 80 mm nominal bore
5
-
-
... More
Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.
40
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes all fittings and the base support for tank.
5000
-
-
... More
Pre- Fabricated Porta Cabin
-
-
-
... More
Supply, Installation, commissioning including Design certifiy from IIT Delhi or any Govt. Institute of porta cabin of having 4 Nos. of rooms (size 5.25M x 7.52M approx), 3 nos. of rooms (size 5.52M x 6.22M approx), Store room (size 2.30M x 5.82M approx), Multipurpose Hall (size 18.90M x 7.52M), Lobby (size 18.45M x 4.57M) & 2.5M wide passage both side of lobby at Second Floor Block- C (Sports block) as per drawing enclosed for HansRaj College, Malka Gunj, Delhi in Pre Engineered Technology with structural steel work including required foundation work & Civil work with all respect as per design required and Puf Insulated continous sandwich panel as approved by Architect in all respect as per approved drawings. (Note:- The design has to be approved by our consultanting Architect.)
620
-
-
... More
Wall Panels- The prefabricated Room outer wall shall be constructed of 80 MM thick PUF insulated panels. The Prefabricated Room wall shall be constructed of 80MM thick PUF insulated panels having 40+2 Kg/m3 density lined with 0.5mm thick pre coated GI sheet both side. These panels shall be interlocked together through tongue & Groove system along with camlock with provision of fixing high wall air-conditioning unit and smart boad in walls.
The polyurethane will be conforming to IS 12436-1988 and flammability as per 52 DIN 4102 part-1. The PU is injected into the panel with a high pressure dispensing unit capable of forming a panel in single shot. The hydraulic press has oil heated platens which allow smooth flow of PUF chemicals mixture when it is injected for forming of panels.
-
-
-
... More
Roof Panels - The Prefabricated Room roof shall be constructed of (50+30) MM thick PUF insulated panels having 40+2 Kg/m3 density lined with 0.5mm thick pre coated GI sheet both side. The top sheet of the panel is in trapezoidal shape. These panels shall have overlap joinery system. Each panels shall have reinforcement m.s. tube of 40mmx40mmx1.2mm with Hanging arragement for fixing projector in ceiling.
The polyurethane will be conforming to IS 12436-1988 and flammability as per 52 DIN 4102 part-1. The PU is injected into the panel with a high pressure dispensing unit capable of forming a panel in single shot. The hydraulic press has oil heated platens which allow smooth flow of PUF chemicals mixture when it is injected for forming of panels. Roof should have gutter for rain water & with vertical rain water pipe on both side.
-
-
-
... More
Jointing system of wall & Roof Panels- The Roof panels are joined with the wall panels with internal & external flashings made from PCGI sheets and duly riveted with the wall & roofing.
-
-
-
... More
MS Strcuture- Structure shall be fabricated of Rectangular Hollow Sections for Columns and Cold Form Folded Sections for trusses, purlins and runners. The steel structures shall be primer coated with one coat and finish painted with two coats. MS Structure of walls & ceiling/roofing should able to fixing Casette Type A.C. / Hi-wall Type A.C. , Smart Board & projecor.
-
-
-
... More
Note:- The strength of Structure withstand the 47m/s velocity of wind. And the design should be in according the Seimic Zone -IV. The Live load 0.57KN/SQM & Dead load 0.10KN/SQM. Note:- All Shop Drawing prepard by Vendor as well as Design, Drawings should get approved by Architect before start of work.
-
-
-
... More
Vendor should specificed the Fire Rating of material uses for the constructing of porta Cabin i.e. for sheeting & filling material of Puf.
-
-
-
... More
False Ceiling:- Supply and installation of Mineral Tile False ceiling tiles of size 2’x 2’ with grid system along with all necessary fitting in all Rooms, Halls & Store and G.I. Tile False Ceiling with Grid system in Corridor as per CPWD specification.. (Make :- ArmStrong /Gypteck/ Everest)
-
-
-
... More
Flooring :- In Rooms, Halls & corridorflooring will be Kota stone 25mm thick slab flooring ( size 22'x22') & Tact tile (yellow color) in corridor over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (Note:- Rate is inclusive of PCC of any thickness, if required.)
-
-
-
... More
Electrical:- Supply and installation of electrical wiring as per Drawing (All switches & sockets with Switch board - Make –Modular Type Switch Board ( Northwest/ Legrand/ Roma), Cable copper (Make: Havells, Plaza), MCB’S of (Make- L&T, Havells), Mobile charging socket, projector and smart board power supply sockets as per drawing including Electrical main panel with required earthening for all area ( the design and SLD diagram should be approved be Architect (electrial connection of proposed porta cabin structure withi college/ sportblock main electrical panel for electrcial supply, inlcuding all Fixture LED lights size 600x600mm, Fans of 1200mm dia & required earthing including the cost of all Items at Second Floor area as per CPWD specification.
-
-
-
... More
Doors :- Supply and installation of Powder Coated Aluminium doors of required size as per drawing having with 16 gauge Thickness having Two soild panel of 12mm thick prelaminated particle board. Door should havevision panel with all necessary fitting & fixture like Handles, Lock, Door closer, Hinge, L-Drop as per requirement & as per CPWD specification (Note:- All fitting should be approved by Architect)
-
-
-
... More
Windows:- Supply and installation of aluminium powder coated two track sliding type With safety grills with the all necessary locking arrangement of size 4’ x6' x 1.6mm with 16 gauge as per Drawing inclosed as per CPWD specification
-
-
-
... More
Sunshades:-Sunshades will be supply and fixing will be made our of color sheet MS angle frame. Provided to all windows and doors.
-
-
-
... More
Gutter:- Supply and installation of gutter of size 12”x 12”x 15” x 1.5” for rain water and PVC pipe fixed up to our existing pipe.
-
-
-
... More
Pre coated GI Sheet flashing in L- Type to fill the gap between Parpet wall & Vertical puff panel
-
-
-
... More
Mode of Measurements:- Covered area shall be for payment (Projection, Gutter & Sun shade not will be measurment for payment).
-
-
-
... More
Roof Panels - The Prefabricated Room roof shall be constructed of (50+30) MM thick PUF insulated panels having 40+2 Kg/m3 density lined with 0.5mm thick pre coated GI sheet both side. The top sheet of the panel is in trapezoidal shape. These panels shall have overlap joinery system. Each panels shall have reinforcement m.s. tube of 40mmx40mmx1.2mm.
The polyurethane will be conforming to IS 12436-1988 and flammability as per 52 DIN 4102 part-1. The PU is injected into the panel with a high pressure dispensing unit capable of forming a panel in single shot. The hydraulic press has oil heated platens which allow smooth flow of PUF chemicals mixture when it is injected for forming of panels. including in front of Creche gutter provision for rain water pipe. (Above Toilet block)
60
-
-
... More
Jointing system of Roof Panels- The Roof panels are joined with the wall panels with internal & external flashings made from PCGI sheets and duly riveted with the wall & roofing.
-
-
-
... More
MS Strcuture- Structure shall be fabricated of Rectangular Hollow Sections for Columns and Cold Form Folded Sections for trusses, purlins and runners. The steel structures shall be primer coated with one coat and finish painted with two coats. MS Structure should be for fixing Casette Type / Wall mounted Type A/C , Smart Board & projector.
-
-
-
... More
Note:- The strength of of Structure with stand the 47m/s velocity of wind. And the design should be in according the Seimic Zone -IV. The Live load 0.57KN/SQM & Dead load 0.10KN/SQM. Note:- All sttel work Shop Drawing prepared by Vendor & Design calculations & Drawing should be approved by Architect before start of work.
-
-
-
... More
Vendor should specificed the Fire Rating of material uses for the constructing of porta Cabin i.e. for sheeting & filling material of Puff.
-
-
-
... More
Stucture Repair and Waterproofing
-
-
-
... More
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Approved Make: BASF / Fosroc / Huntsman / Sika
-
-
-
... More
Bars up to 12 mm diameter
9000
-
-
... More
Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm up to 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In- Charge. Approved Make: BASF / Fosroc / Huntsman / Sika
-
-
-
... More
Up to and including 12mm dia.
1250
-
-
... More
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Approved Make: BASF / Fosroc / Huntsman / Sika
-
-
-
... More
Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make
800
-
-
... More
Providing and laying ready to use non shrink. Cementious free flow micro concrete for slab / beams/ columns of compressive strength = 500 Mpa ( 28 days) according to ASTM C 109 of approved make and manufacture complete as per direction of Engineer- in - charge for replacing the carbonate part of concrete and repairing the damaged surface of concete after fix the form work across the profile of damaged structural element or area. Pour the free flow non shrink Cementious free flow micro concrete mix in the form work. Cast-in-situ or any other suitable technique may be used to apply the concrete at all floor and all height including the cost of centering, shuttering, & smoth surface finishing . (Make: Renderock RG of Fosroc/ SikaRep Microcrete - 4 of Sika.
-
-
-
... More
Note:- Providing and erecting steel props (braced at centre and supported a continuous 2"x3"wooden runner, resting on wedge and block minimum capacity 3 Ton) to support the structure provisionally during repair and jacketing etc. and maintaining them in position till required as directed by the Engineer-in-charge. (no payment will be paid for props etc work)
-
-
-
... More
Micro Concreting Thickness from 40mm to 75mm
800
-
-
... More
Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer- in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Approved Make: BASF / Fosroc / Huntsman / Sika
-
-
-
... More
Epoxy injection grout in concrete/RCC work of approved Make
10
-
-
... More
Suppling and fixing 2mm thick weld mesh of size 75 x50mm for floor/roof slab concrete screed over the micro beams, slab, structural members, column & pier as reinforcement. The weld mesh shell be fixed as per drawing & Design.
800
-
-
... More
Centring and Shuttering work including all height:
Providing and fixing rigid & water tight shuttering including its removal after completion of repair work. The mould must be suitable, robust and firmly fixed to withstand the applied pressure without leakage of grout. the specifications, materials, fixing methods shall be as per relevant IS codes/CPWD specifications & as per directions of E-I-C including scaffolding.
800
-
-
... More
Rebarring Connection System
The work includes following:
(i) Making hole for rebar in concrete / masonry surface of required dia and depth as required at site by using HILTI or any other equivalent make drilling tools. (ii) The holes should be blown out using compressed, oil free air. Extension tubes and air nozzles directing the air to the hole walls should be used, if holes are deeper than 250mm with special designed BOSCH or any other equivalent Blower. Deeper holes than 250mm should as well be brushed by machine brushing using steel brushes and brush extensions (iii) Insert chemical compound HY150 / Hilti RE- 500 or equivalent with special designed guns. (iv) Placing of the rebars should be inserted into the hole with a slight rotary motion after injecting the rebarring chemicals.
Rate shall include all charges for above operations including scaffolding system , packers and preparation of surface, cost of necessary chemical / foil as per manufactures specification and necessary tools and equipments including removal of debris from the site all complete as directed by Engineer-in-Charge.
Make:- Hiliti, Bosch, Fischer.
-
-
-
... More
08 to 12 mm dia rebar with 12/ 14 mm dia hole
200
-
-
... More
16 mm dia rebar with 20 mm dia hole
40
-
-
... More
20 mm dia rebar with 25 mm dia hole
10
-
-
... More
Providing & fixing shear connectors of 10mm dia TOR steel up to 150mm length with sika Anchor Fix -3+ / Mungo/ Fisher Fisv 390/ Hilti RE -500 Epoxy resin RCC members including power drilling, cleaning of holes, insertion of epoxy, placing shear connector in position to ensure the bond as per manufactire recommendation complete as per site requirment and direction of Engineer or Architect.
1250
-
-
... More
Reinforcement for Micro Concreting work including straightening, cutting, bending, placing in position and binding all complete as per design. Thermo-mechanically treated bars- FE500
(Make: Tisco, SAIL, Jindal)
-
-
-
... More
Thermo-Mechanically Treated bars.
5850
-
-
... More
Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand) including water proofing material in cement plaster work in proportion recommended by the manufacturers.
800
-
-
... More
Providing and laying water proofing treatment on roofs of slabs by applying water proofing compound consisting of applying: a) after surface preparation, first layer of slurry of Dr. Fixit Fastflax @ 0.06 sqm / kg. b) laying second layer of Fibre glass cloth. Overlaps of joints of fibre cloth should not be less than 10 cm as per direction Engineer - In - Incharge.
800
-
-
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.)
90
-
-
... More
Alumnium / Miscellaneous Works
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (For Toilet block ) :
-
-
-
... More
For fixed portion
-
-
-
... More
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
110
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required & all fittings.
-
-
-
... More
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
110
-
-
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
-
-
-
... More
Pre-laminated particle board with decorative lamination on both sides / aluminium composite panel 4 mm thick
20
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 5.50 mm thickness
25
-
-
... More
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete.
-
-
-
... More
355 X 19 mm
4
-
-
... More
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.
-
-
-
... More
Polyester powder coated minimum thickness 50 micron aluminium.
70
-
-
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
-
-
-
... More
125x64x1.90 mm
50
-
-
... More
Providing and fixing aluminium tower bolts ISI marked transparent or dyed to required colour or shade with necessary screws etc. complete:
-
-
-
... More
250x10 mm
15
-
-
... More
150x10 mm
15
-
-
... More
Electrical Works
-
-
-
... More
Wiring for light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FRLS PVC insultated copper conductor multistrand wire in surface/recessed PVC conduit, with modular switch, modular plate, suitable size GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor multistand copper wire etc. as required. Wire Make: Havells ,k k kable, Polycab, Finolex. Conduit Make:- Supreme, Prakash, Satia. Switch Make:- Anchor Roma, North West, Legrand.
200
-
-
... More
Loop Point Wiring for light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FRLS PVC insultated copper conductor multistrand wire in surface/recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor multistand copper wire etc. as required. Wire Make: Havells ,k k kable, Polycab, Finolex .
Conduit Make:- Supreme, Prakash, Satia. Switch Make:- Anchor Roma, North West, Legrand.
10
-
-
... More
Supply & Installation of the following wiring accessories, complete with recessed/surface type metal boxes, modular gridplate, faceplate and accessories in walls/partitions Make:- Legrand
-
-
-
... More
5/6 amp. Two Five pin socket with switch
40
-
-
... More
15/16 amp. Two Five pin socket with switch
40
-
-
... More
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductorwire in surface/recessed PVC conduit as required. Wire Make: Havells ,k k kable, Polycab, Finolex
-
-
-
... More
2 x 2.5 sq.mm + 1 x 2.5 sq. mm earth wire
100
-
-
... More
2 x 4 sq.mm + 1 x 4 sq.mm earth wire (for power)
150
-
-
... More
Supply, installation, testing & commissioning of following surface / recessed type fluorescent tube lighting fixtures complete with lamps, control gear & low loss CW ballasts celing fans and bracket fans .
-
-
-
... More
2'x2' Surface light/recesse Led Light 32 watts including all fixture as per approved material list approved by Engineer incharge Make:- Philips, Siska, Wipro, Havells, Bajaj
10
-
-
... More
48" ceiling fans with all accessories approved by clint Make- Havells Philips, Siska, Wipro, Bajaj
5
-
-
... More
Supply and Installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, coonection, testing, commissioning etc. as required
Make:- Havells, Usha, Bajaj. Philips
8
-
-
... More
Providing, laying, testing and commissioning of 600 x 600 x 6.3 mm thick GI electrode, with 2 no. 50 X 6 mm GI strips from earth electrode to inspection chamber, 50 mm dia medium class GI pipe, CI funnel with 20 gauge GI wire mesh, masonry chamber 450 x 450 mm with 3 concrete base CI / Heavy duty chequered plate manhole cover with frame painted with bitumastic paint and packing with mixtures of charcoal and common salt around plate electrode including digging of pit upto permanent moisture level but not less than 3 meter
2
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
80
-
-
... More
Supplying, laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured/ unarmoured PVC insulated PVC sheathed aluminium /copper conductor cables conforming to IS : 1554 Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including End termination, Joints & clamping the cables to supports in an approved manner as required complete with all accessories.
Make:- Finolex , Havells, Polycab.
-
-
-
... More
4 c x 16 sq.mm YFY Cable
150
-
-
... More
VRV Air conditioning Works
-
-
-
... More
VRV Indoor Units
-
-
-
... More
Supply & Installation of following minimum capacity 4-way/ round flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with corded remote , synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, drain pan, drain pump, cassette grill, insulation, necessary supports, vibration isolation etc, suitable for operation on 230 V ± 10%, 50 Hz single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire. All indoor Units should have force shut option to connect with fire alarm adaptor, so that the unit automatically stops in case or fire. The cooling capacity of indoor unit will be at air inlet conditions of 27 degree C DBT and 19 degree C WBT. All 4 louvers of the unit shall be independently adjustable for positiion as per user preference.
-
-
-
... More
The cassettes units shall have dual sensor which detect the presence of people and floor temperature to provide comfortable air-conditioning and energy saving. The sensor should detects human presence and adjust the airflow direction automatically to prevent drafts. Room temperature should increase upto 4 deg C or the indoor to be switched off when no people are detected or as per user preference. The sensor should detects the floor temperature and automatically adjusts the operation of the indoor unit to reduce the temperature difference between the ceiling and the floor.. MAKE: DAIKIN / Mitsubishi/ Toshiba/ O General
-
-
-
... More
Cassette Type
-
-
-
... More
(Celing Mounted Cassette Unit Round Flow Type Unit),2.0 TR with corded remote
14
-
-
... More
(Celing Mounted Cassette Unit Round Flow Type Unit),1.6 TR with cordedremote
6
-
-
... More
Hiwall Type
-
-
-
... More
(High Wall Type Unit),1.3 TR with corded remote
2
-
-
... More
(High Wall Type Unit),1.6 TR with corded remote
4
-
-
... More
(High Wall Type Unit),2.0 TR with corded remote
8
-
-
... More
Supply,installation,testing & commissioning of modular type variable refrigerant flow / variable refrigerant volume air cooled Outdoor units suitable for cooling & heating having all hermetically sealed inverter type Scroll compressor,minimum two compressors for above 14HP modules, microprocessor based controller,top discharge type condensing unit,with R410A Refrigerant,vibration isolators with suitable foundation etc. complete as required. The unit shall deliver the below mentioned capacity at 45 deg ambient temperature (bidder to consider applicable deration) & work even at 50 deg ambient temperature without tripping.The unit shall be suitable to work on 400V+/-10%,3 PHASE,50 Hz AC power supply.The unit shall be filled with first charge of the refrigerant & ready for use as required.
-
-
-
... More
The ODU shall have low noise condenser fans with extrenal static pressure of the outdoor unit shall be more then 75 Pa to avoid hot air recirculation, auto address setting, auto check function for connection error and complete with indoor and outdoor units with individual controller and with fittings etc. The compressor and VRV/VRF Outdoor make should be same. For enhanced energy savings the COP of each refrigerant circuit system mentioned below shall be 7.1 minimum at 50% load, at AHRI Condition in cooling mode. The unit shall also have feature to automatically modulate the evaporative temperature between 6 deg C to 11 deg C with respect to load for better comfort and energy efficiency. (Unit shall deliver atleast 87% of mentioned nominal capacity @ 43 Deg C). The Unit should have free phase technology so that unit can work in case of phase reversal also without tripping of units.
-
-
-
... More
Outdoor unit (Heat Pump)
-
-
-
... More
22HP (12HP+10HP)
2
-
-
... More
30HP(10HPx3)
1
-
-
... More
Supply, installation testing and commissioning of I- Touch Controller
1
-
-
... More
Supply & Installation of Refnet Joints
30
-
-
... More
Refrigerant Piping
-
-
-
... More
Supply & Installation of refrigerant copper pipe work with insulation 19/13 mm thick closed cell electrometric Nitrile rubber tubular insulation between each set of indoor & outdoor units.The thickness of the pipes shall be as per manufacturer's standard.. Make: Rajco/Maxflow/Jobu/Indigo
-
-
-
... More
34.9 mm O.D. Pipe Size with insulation of 19 mm thick
36
-
-
... More
28.6 mm O.D. Pipe Size with insulation of 19 mm thick
45
-
-
... More
22.2 mm O.D. Pipe Size with insulation of 19 mm thick
38
-
-
... More
19.1 mm O.D. Pipe Size with insulation of 13 mm thick
65
-
-
... More
15.9 mm O.D. Pipe Size with insulation of 13 mm thick
150
-
-
... More
12.7 mm O.D. Pipe Size with insulation of 13 mm thick
105
-
-
... More
9.5 mm O.D. Pipe Size with insulation of 13 mm thick
190
-
-
... More
6.4 mm O.D. Pipe Size with insulation of 13 mm thick
90
-
-
... More
Supply & applying of UV Coating for Copper Pipe exposed to atmosphere.
70
-
-
... More
Starbond (Paramount)
-
-
-
... More
Electrical Control Cabling
-
-
-
... More
Supply & installation of Control cabling for VRV Units (between ODU & IDU , between IDUs and remotes 2c x 1.5sqmm in rigid pvc FRLS conduit of medium density.
Make :-KEI/Polycab/Finolex
700
-
-
... More
Supply and fixing of perforated type GI cable trays of the following sizes as per specifications..
Make :- SRG/Sai Metal
-
-
-
... More
Plain Tray
-
-
-
... More
300mm x 50mm (1.6mm Thick)
200
-
-
... More
150mm x 50mm (1.6mm Thick)
100
-
-
... More
Perforated Tray With Cover
-
-
-
... More
300mm x 75mm (1.6mm Thick)
40
-
-
... More
150mm x 75mm (1.6mm Thick)
40
-
-
... More
Drain Piping
-
-
-
... More
Supply and fixing of uPVC piping with 9 mm thickness insulation. Make: Supreme/Polypack/Setia
-
-
-
... More
25 mm dia
150
-
-
... More
32 mm dia
70
-
-
... More
40 mm dia
60
-
-
... More
50 mm dia
40
-
-
... More
Supply & Filling of Additional Refrigerant
30
-
-
... More
Supply & Filling of MS Stand with VI Rubber Pad for Outdoor Unit
-
-
-
... More
30HP
1
-
-
... More
22HP
2
-
-
... More
Additional Protection Coating for Equipment
-
-
-
... More
For Outdoor Unit
7
-
-
... More
For Indoor Unit
33
-
-
... More
Electrical panel and DBs
-
-
-
... More
Supply & installation of Isolator switch of suitable size in weatherproof enclosure conforming to IP65 (to be located in the vicinity of outdoor unit).with following specs.
MAKE: KEPL / Risha/ Advance
-
-
-
... More
Incomer 150 amp MCCB
-
-
-
... More
Busbar aluminium 200 amps
-
-
-
... More
Outgoing 25 amps RCBO X 8 Nos.(with one spare)
1
-
-
... More
Supply Installation testing and comminssioning of Floor DB 36 way with 32 ampsDP incomer and 20 nos. 6 amps SP MCBs
Make :- Indo- Asian / Legrand / LT
3
-
-
... More
Supply installation testing and commissioning of 3x2.5 sqmm flexible wirein PVC conduit of 20 mm medium density from DB to each indoor units MAKE: POLYCAB / HAVELLS / KEI
650
-
-
... More
Supply & Fixing of 3 Pin Top for AC Unit
33
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements