Delhi University Tender

Erection of steel tubular or rail pole strut in cement concreate 1:3:6 (1 cement :3 coarse and : 6 graded stone aggregate 40mm nominal size) foundation size shall be 1200mm x 400mm x 400mm with IN and OUT slot for cable including excavation and refilling and secured with holding clamps, bolts, nuts etc. as reqd.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as reqd. 4x16 sq.mm

Suplying & fixing of following type steet lights fitting luminaire with efficacy 100 lumen/watt , pressure dia cast aluminium and heat resistance toughened flat glass complete with accessories having IP 65 protection with against dust and water & replaceable driver with 4 KV surge protection i/c making connections etc as reqd.(make Philips)

70 watts (BRP 032P LED 75CW)

150 watts (Model BRP340LED 175 CW)

Supplying,fixing and laying of one number PVC insulated and PVC sheathed/XLPE aluminium conductor, armoured power cable confirming to 1.1KV grade of following size direct in ground including excavation,sand cushioning, protective covering, refilling the same etc as reqd.

4x16 sq.mm

3x6 sq.mm

S/F 3x2.5 sq mm PVC sheathed copper conductor flexible wire i/c connection etc as required

S/I/T/C of 150 watts LED flood light fitting 5700K pressured die cast housing with IP 65 protection efficient high 220V- 40V output emitter LED for better distribution with dimension 447x163x327 mm and colour 6500 with lumens 17200 with all accessories etc. as required at site. (Model No. BVP122 LED 147 CW AK55 FG PSU A1) (Philips Make)

Supplying and fixing of 40mm HDPE Pipe i/c excavation of CC road and making good the same etc. ad reqd. (Rex, Finolex and Jindal)

Supplying and Fixing of 500 mtr long Over hang made out of suitable dia G.I. pipe and suitable for 70 mm dia G I Polei/c Nut bolts etc as required

Single arm Bracket

Double Arm Bracket

Servicing / cleaning the panel/feeder pillar with air blower i/c rubbing the corrossion, painting the panel with two or more coat i/c dressing the cables etc. complete as reqd.

Supplying and Fixing of Landshape gate light fiiting decorative Post Top for 360 degree indirect lightwith IP 65 protection and resistant to impact and corrosion glare freeand better informity etc as required at site (Cat No. LPTO-40-CDL)

S/F of 16 sq. mm aluminum lugs i/c crimping connection testing etc. as reqd.

Supply, Testing and commissioning of HOT dip galvanized octagonal steel pole of 5 mtr height made out of 3mm thick sheet PCD 200 mm, having bottom 130mm A/F & top 70mm A/F with built in connector box of size 500 mm length, M.S. base plate of size 200mm x 200mm x12mm thick to accommodate the fitting on existing RCC foundation i/c S/F of 4 Nos. M-16 x 450mm long J Type (EN-8 grade) G.I. foundation bolts & nuts with 3 Nos. and 2 Nos. washer along with suitable size templates, making connections, interconnections with suitable size of copper wire with timble/lugs in the connection box, earthing, making numbering of pole etc complete as per drawing & technical specifications attached including following accessories mounted on inbuilt control box having flush cover with 2 Nos mounting strips with tapped holes (a) 6mm thick phjenolic laminated sheet/ bakelite sheet inside the window mounted on the existing mounting strips inside the flush door ( b) S/F of Teriminal block suitable for 16 sq. mm conductor 4 Nos. & shorting links - 5 Nos. on DIN Chneels (c) Terminal suitable for 6 SWG GI Wire/ 1.5 sq. mm wire (d) 6Amp SPMCB 10 KA 'C' Series - 1 No. i/c mounting on DIN Channel (Make : Bajaj/ Paruthi/ Surya)

Supplying & fixing of street light pole box of size 8"x10"complete all accessories i/c suitable clamps brass screws,washers and 1 No SP MCB of 10 amps capacity, 4 way DMC stud cap terminal block i/c making connections etc as required

S/I/T/C of 200 watts LED flood light fitting 5700K pressured die cast housing with IP 65 protection efficient high 220V- 40V output emitter LED for better distribution with dimension 447x163x327 mm and colour 6500 with lumens 17200 with all accessories etc. as required at site. (Model No. BVP122 LED 185 CW SY24 FG PSU A1) (Philips Make)

Dismantling the existing Rusted MS Pole/ Concreate Pole, fitting/ accessories and deposting the same at Engineering Store