Delhi University Tender
... More
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Delhi University - DU Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date6 Mar 2025
Closing Date17 Mar 2025
Tender Amount₹ 3,10,49,271
AI Insights
Technical
Technical
Bid Capacity
... View More
To determine the bid capacity required, we look at specific requirements for the bidder's experience and financial capabilities. The bid capacity or experience required is mentioned in terms of the value of similar works executed. The requirements are as follows:
- Three similar works each of value not less than 40% of the tender value, which is Rs.1,24,19,708.40.
- Two similar works each costing not less than 60% of the tender value, which is Rs.1,86,29,562.60.
- One similar work of value not less than 80% of the tender value, which is Rs.2,48,39,417.20. Therefore, the bid capacity required in terms of similar work experience is:
- At least three works with each work valued at or above Rs.1,24,19,708.40.
- Alternatively, at least two works with each work valued at or above Rs.1,86,29,562.60.
- Or, one work valued at or above Rs.2,48,39,417.20. Given the tender value, we can calculate the bid capacity requirements as follows:
1. For three similar works: 3 * 40% of the tender value = 3 * Rs.1,24,19,708.4 = Rs.3,72,59,125.2
2. For two similar works: 2 * 60% of the tender value = 2 * Rs.1,86,29,562.6 = Rs.3,72,59,125.2
3. For one similar work: 1 * 80% of the tender value = Rs.2,48,39,441.68 The bid capacity required can be summarized as:
- Three similar works, each valued at not less than 40% of the tender value (Rs.1,24,19,708.4).
- Two similar works, each valued at not less than 60% of the tender value (Rs.1,86,29,562.6).
- One similar work valued at not less than 80% of the tender value (Rs.2,48,39,441.68). The final answer is: Three similar works: Rs.1,24,19,708.40, Two similar works: Rs.1,86,29,562.60, One similar work: Rs.2,48,39,417.20
Technical Capacity
... View More
The bidder is required to have prior work experience in similar works, with specific value requirements. They should have completed similar works with values such as: - Three similar works with a value of at least 40% of the tender value (i.e., Rs.1,24,19,708/- each)
- Two similar works with a value of at least 60% of the tender value (i.e., Rs.1,86,29,563/- each)
- One similar work with a value of at least 80% of the tender value (i.e., Rs.2,48,39,417/-)
The tender value is Rs.3,10,49,271/-. These works should have been executed in the last 7 years ending on the last date of submission of bids.
Costs
EMD
₹ 6,20,985Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DU_852222_1Tender No
CEET-6430Tender Authority
Delhi University ViewPurchaser Address
-Website
http://http://www.du.ac.in/du/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Replacement of existing VRV/VRF air-conditioning system of Ground Floor, First Floor and Third Floor in Permanent Stand at Sports Complex. University of Delhi. (Part-A)
BOQ Items
... More
3.0 TR 4 way Cassette Type IDU having 1200 CFM (f3/min)
32
106773
3416736
... More
4.0 TR 4 way Cassette Type IDU having 1624 CFM (f3/min)
25
111939
2798475
... More
Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation /with Class- O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :(NOTE :- 1) The Copper Piping & Piping Circuit should be with Minimum Number of joints, which shall be attained by : (i) Using One End Expanded Tubes (ii) Bending the tubes instead of using elbow joints wherever 90 degree bending is required. (2) Piping should be routed at site in such a manner, that brazed joints in the refrigeration piping are kept to a minimum. (3) The makes of tube fittings shall be same as that of tubes. (4) The thickness of fittings used shall be same as that of the pipe.)
-
-
-
... More
41.27mmdia(OD)(Harddrawn)with tube thickness1.62mm with19 mm thick insulation
90
3000
270000
... More
34.9 mm dia (OD) (Harddrawn) with tube thickness 1.62 mm with 19 mm thick insulation
80
2500
200000
... More
28.58 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19 mm thick insulation
150
2000
300000
... More
22.2 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19 mm thick insulation
150
1800
270000
... More
15.86 mm dia (OD) (Softdrawn)with tube thickness 1.2 mm with 19 mm thick insulation
300
1711
513300
... More
12.7mmdia(OD)(Softdrawn) with tube thickness 1.2 mm with 19 mm thick insulation
250
1600
400000
... More
9.5mm dia (OD) (Softdrawn) with tube thickness 1.2mm with 19mm thick insulation
400
1504
601600
... More
6.4 mm dia (OD) (Softdrawn) with tube thickness 1.2mm with 19mm thick insulation
150
1200
180000
... More
Supply , Installation , testing and commissioning of unarmoured Control cum transmission wiring of 2 core X 2.5 sqmm copper wire in suitable conduit between Indoor and outdoor units as per site requirement.(these wires should be drawn in proper Heavy duty PVC conduits)
300
250
75000
... More
Supply , Installation , testing and commissioning of unarmoured 2 core X 1.5 sqmm copper wire between indoor units and their wired remote as per requirement and specifications.
450
150
67500
... More
Supply , Installation , testing and commissioning of drain pipe of 25mm dia UPVC pipe complete with fittings, supports duly insulated on surface/recess i/c cutting and making good the same etc. as required
500
180
90000
... More
Topping up of VRF/ VRV airconditioning system with Refrigerant R 410 A as per the requirement at site.
225
1700
382500
... More
Provision of UV coating treatment of approved make on Outdoor Units.
36
22500
810000
... More
Supply , Installation , testing and commissioning of 'Y' joints for Outdoor VRV/ VRF units.
15
11590
173850
... More
Supply , Installation , testing and commissioning of 'Y' joints for Indoor VRV/ VRF units.
82
8500
697000
... More
Provision of Hanging arrangement with studs and angle frame for indoor units (IDU) as required at site
82
21830
1790060
... More
Dismantling the existing defective VRV/ VRF units from roof of the building and depositing the same at Engineering store
1
275000
275000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%