Delhi Transport Infrastructure Development Corporation Limited Tender

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 8 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) Single pole

Supplying and fixing following rating,240 V/415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 63 A DP

(b) 63 A FP

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)( a) 4 way (4 + 12), Double door

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. (a) Upto 35 sq. mm (clamped with 1mm thick saddle)

(b) Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. (a) Upto 35 sq. mm

(b) Above 95 sq. mm and upto 185 sq. mm

Supplying and making end termination with brass compression gland and Aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 kV grade as required (a) 2 X 6 sq. mm

b) 3.5x25sq. mm

c) 4x16 sq.mm

d)3.5x120 sq.mm

e)3.5x185 sq.mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. ( a) 120 mm dia (OD-120 mm & ID-103 mm nominal)

b) 90 mm dia (OD-90 mm & ID-76 mm nominal)

c) 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying & fixing of following sizes of steel/PVC conduit alongwith the accessories in surface/recess i/c painting in case of surface conduit the wall and making good the same in case of recessed conduit as reqd. (a) 25 mm dia PVC conduit

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required

Design, fabrication, supplying and Installation of compartmentalised type dust & vermin proof, floor/wall mounting front openable, cubicle panel fabricated out of 14 SWG CRC/MS sheet having minimum depth of 300 mm with locking arrangement cpmrising of following capacity switch gears and accessories suitable for operation on 415V , 3 phase 50Hz AC supply system, and i/c cutting , welding, painting with powder coated paint of approved colour and shed , sign writing , required number of cable entry knock out i/c S/F Aluminium alloy Bus Bar of 300 A rating duly insulated with hear shrinkable sleeves of RYB colours, interconnection, insulators, baklite sheet, S/F 25x 5 mm Allumnium Earth bus with insulation along with length of panel, minor civil works and making good the damages etc complete as reqd as per specifications( The drawing and size of each panel shall be got approved by the Engineer-in-Charge before fabrication) Incommer: (a) 250 A 4 P MCCB 35 KA with thermomagnetic release and terminal spreaders - 1No. (b) Digital multifunctional meter for showning Volt/ Amp/KWH/ KVAR/PF etc. with CTs of suitable ration --- 1 No. (c) LED type indicating lamp for RYB with 2A MCB ---3 Nos. Outgoing: (a) 160 A FP MCCB 25 KA with thermomagnetic release and terminal spreaders-1 No. (b) 100 A TP MCCB 16 KA with thermomagnetic release and terminal spreaders and neutral link--- 1 Nos. (c) 63 A TP MCCB 16 KA with thermomagnetic release and terminal spreaders and neutral link--- 2 Nos. (d) 63 a DP isolator - 3 Nos.

Design, fabrication, supplying and Installation of compartmentalised type dust & vermin proof, floor/wall mounting front openable double door out door type cubicle panel fabricated out of 14 SWG CRC/MS sheet having minimum depth of 300 mm with locking arrangement cpmrising of following capacity switch gears and accessories suitable for operation on 415V , 3 phase 50Hz AC supply system, and i/c cutting , welding, painting with powder coated paint of approved colour and shed , sign writing , required number of cable entry knock out i/c S/F Aluminium alloy Bus Bar of 200 A rating duly insulated with hear shrinkable sleeves of RYB colours, interconnection, insulators, baklite sheet, S/F 25x 5 mm Allumnium Earth bus with insulation along with length of panel, minor civil works and making good the damages etc complete as reqd as per specifications( The drawing and size of each panel shall be got approved by the Engineer-in-Charge before fabrication) Incommer: (a) 160 A 4 P MCCB 25 KA with thermomagnetic release and terminal spreaders -- 1 No. (b) Digital multifunctional meter for showning Volt/ Amp/KWH/ KVAR/PF etc. with CTs of suitable ration --- 1 No. (c) LED type indicating lamp for RYB with 2A MCB --- 3 Nos. Outgoing: (a) 100 A TP MCCB 25 KA with thermomagnetic release and terminal spreaders and neutral link --- 1 Nos. (b) 63 A TP MCCB 16 KA with thermomagnetic release and terminal spreaders and neutral link --- 3 Nos. (c) 63 A DP isolator - 3 Nos

Supply, installation, testing and commissioning Octagonal hot dipped galvanized street light poles made out of 3mm sheet thickness without bracket of 9 meters Height and having bottom dia of not less than 155mm, top dia not less than 70mm, Base plate of size not less than 260mm x260mmx 16mm thickness i/c providing and making RCC foundation of suitable size, minimum 4 Nos. 24mm dia 750 mm long special steel foundation bolts, washers, nuts, earth terminal etc. complete as required. (Make : Valmont/Keselec/Salasar/Bajaj )

Supply, installation, testing and commissioning of following rating LED flood light/street light fixture with die-cast aluminium housing with inbuilt digital ambient sensing zero to 35 degree, easy tilt mechanism arrangement, IP 66 Protection, complete in all respect on existing arm including connecftion etc as required. (M/s Havells/ Crompton/Phillps make) (a) 150 W (street light)

b) 350 W (Flood light)

c) 35 W circular LED highbay

S/F of pipe cap type pole bracket made with suitable cap and 48.3 mm dia, 3.25 mm thick pipe 500mm long for two arm etc. complete as reqd.

S/I/T/C of outdoor type steet light panel fabricated out of suitable size CRCA sheet for 6 KW single phase load complete with 24 hours digital timmer, 32 A TP contactor, 40 SPN MCB i/c interconnection , etc. complete as reqd.

S/I/T/C 32 W LED surface mounting IP66 Energy saving luminaire fixture with PC housing & opal finish cover suitable for wet location, environmental friendly & impact proof i/c interconnection , etc. complete as reqd.

Supplying of PVC insulated PVC sheathered Aluminium/copper. conductor, armouned cable 1.1 KV grade of following sizes as reqd. (a) 2x6 sqmm Aluminium

b) 4x16 sq.mm Aluminium

c) 3.5 x25 sqmm Aluminium

d) 3.5 x185 sqmm Aluminium

e) 3.5 x120 sqmm Aluminium

f) 2x1.5 sq.mm copper

Supply & Installation of 600 mm sweep Air circulator wall mounting fan suitable for operation on 220 volts single Phase AC supply on the existing surface of wall i/c clamps/fasterner, testing, commissioning etc. complete as required

S/I/T/C of Exhaust fan (12”) heavy duty steel body suitable for operation on 220 volts single phase AC supply in the existing opening etc. complete as required

SITC of 24W 6500 K LED batton suitable for operation on 220 volts single phase AC supply etc. complete as required.

Add 21.46% on DSR items amounting to Rs. 2,57,226

Less 9.50% on DSR items amounting to Rs. 3,12,426.70