Delhi Transport Corporation Tender

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

1 Pair

2 Pair

4 Pair

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20 mm

25 mm

32 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amp switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Telephone socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (75mm X 75mm)

6 Module (200mm X 75mm)

12 Module (200 mmX150 mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

125 A, 36kA, FPMCCB

100 A, 16 kA,TPMCCB

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

6 way (4 + 18), Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 A

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 A

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For Horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and pring washers etc. complete as required.

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

Upto 35 sq. mm

Upto 35 sq. mm

Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

3½ X 50 sq. mm (35 mm)

4 Core 25 Sqmm

Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

3½ X 50 sq. mm

3½ X 70 sq. mm

4 Core 25 Sqmm

Supplying and fixing 1000 mm x 900 mm wide checkered rubber matting conforming to IS 5424- 1969 complete as required.

1100 V grade size 1000 x 900 x 15 mm thick

Supplying & fixing standard shock treatment charts in English & Hindi duly framed and covered with glass.

Supplying and erection of the following equipment at suitable locations in the substation building as required and as per specifications.

2 kg DCP with CO2 gas cartridge fire extinguisher (conforming to IS:2171 with cylinder fully charged).(MMX CO2 2 Kg IS:15683 (Wheel Type) (Fire Rating 21B )

Supplying and installing at approved location approved make 4 nos. fire buckets of 24 gauge galvanized steel, painted white inside and red outside and black on the bottom, inscribed with letters "FIRE" in black and gold including stand fabricated out of sheet metal (16 gauge) shade, platform and associated civil works, painting etc as approved by fire authority.

Providing first aid box as per IS:2217.

Design, manufacture, supply, installation, testing and commissioning of following Utility panels suitable for 415 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalized design fabricated out of 2mm thick CRCA sheet steel for Load bearing members and 1.6 mm thick for non-load bearing members, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section throughout the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber (form-3b Construction). The panel shall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panel shall withstand the fault level of as indicated elsewhere or shown in Single Line Diagram. Important Notes: Common for all Switchboard: The BOQ shall be read inconjunction with general notes, specification and Single Line Diagram (attached for Ref.). Incase of any discrepancy between specification, BOQ and SLD, the same shall be brought to the notice of Client/Consultant before quoting the rates, otherwise stringent condition shall be deemed to have been considered. Fault current wherever mentioned shall be Ics value. (Ics = 100% Icu). All MCCB shall be provided with door interlocked rotary handle with ON/TRIP/OFF position indicator, continious variable thermal magnetic O/C and S/C releases. All rating MCCB's shall be thermalmagnetic type. Incoming MCCBs shall be provided with O/C, S/C, and Earth fault protection releases. Outgoing MCCBs shall be provided with O/C, short circuit protection. All feeder doors shall have pad locking arrangement. All TP feeders shall have solid isolable neutral link. All MCCB used in starter feeder shall be suitable for motor duty application. All power contactors including NIC shall be of AC3 duty. All switchgear used in starter feeder shall be type-2 co-ordinated. Manufacturer is required to submit manufacturers type-2 co-ordination chart for the make used. All meters are digital type. Panel shall be powder coated of approved shade with minimum 60 micron thickness. ACB's/MCCB's in one particular panel shall be of one similar make. Size of Voltmeter / Ammeter for incomer also, 96mm x 96mm flush mounted with shrouded terminal shall be used in the panel. Bus bar chamber shall be kept at top of the all panels. All bus bar shall be insulated with coloured PVC Sleeve i.e.RYB,BK as per colour code. Internal wiring of panel shall be with size 2.5sqmm Flexible Copper Conductor for CT circuit and control wiring with 1.5 sqmm. All Lift Panels transport section should not be more then 1000 mm. In soft starter Vender should supply power contactor with aux. Contactor & All necessary accessories required etc. (As per BOQ & specification ) All indicating light shall be LED type . Each vertical section of floor mounted panel shall have independent base frame (75mm x 40mm) size made out of 3 mm sheet steel (LT Panel & DG Panel). All the makes shall be as per Client approved make list only. Wherever only voltmeter & ammeter are required, the same may be provided in combined meter suitable for both parameter. Two (2) Nos. 400 A FP MCCB . One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons (ELF-3259 of conzerv or equivalent) and one set of CTs of ratio 400A /5A, CL 1.0, 15 VA. 3 Nos. phase indication lamps and 3 Nos. status indication lamps for ON/OFF/ Trip with control SP MCB. Busbar : 800A TPN Al. Busbar of short circuit withstand capacity 35kA. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. Outgoing : All MCCB outgoing feeders shall be of 35 kA breaking capacity and shall be provided with ON/OFF / Trip indication lamps with back up SP MCB. Four (4) Nos. 125A FP MCCB Four (4) Nos. 100A FP MCCB

MDB described as above.

Supply installation, testing and commissioning of following sizes of PVC sheathed XLPE insulated Aluminium conductor/copper conductor power/ multicore control armoured cable of 1.1 KV grade on surface of wall or in existing cable tray /masonary ducts/GI pipe with fixing hardware etc as required. Aluminium Conductor XLPE Armoured Cables:

Supply 4 core 25 sqmm

Supply 3.5 core 50 sqmm

Supply, laying, installation, testing and commissioning of Tagblock in wall recessed / surface mounted.

10 Pair

Supplying and fixing following modular switch/ socket with modular plate & switch box including connections etc. as required.

RJ-45 cat-6

Supply and drawing of cat 6 Data cable in existing conduit as require.

Supply, receiving, storing, handling, assembling in position the following light fixtures including lamps as described below complete with all accessories, control gear as required at site.

15W LED 300x300mm SQUARE LIGHT

15W LED CEILING LIGHT

Ceiling Mounted Fans (1200mm Fan)

10W LED CEILING LIGHT (TOILET)

20 W Tube Light

10 W Mirror Light

Exhaust Fan (225 mm Air Flow ) or EQUIVALENT

Providing, laying, Testing & commissioning of C-class heavy duty MS pipes confirming to IS 3589/1239 including welding ,fittings like elbows, Tees, Flanges, tapers, nuts bolts, gaskit etc. Fixing the pipes with suitable clamp/support and painting with two more coats of synthetic enamel paint of required shade as required

80 mm dia

100 mm dia

Supply & Fixing of Single Headed Internal hydrant Valve with instantaneous gunmetal/stainless steel coupling of 63 mm dia with cast iron wheel ISI marked confirming to IS 5290 with blank Gun metal/stainless steel Cap and chain as required.

Single headed Gun metal

Supply, Fixing, testing & commissioning of Butterfly valves of PN 1.6 rating with bronze/gun metal seat duly ISI marked complete with nuts, bolts, washers, gasket confirming to IS 13095.

100 mm dia

Supply, Fixing, testing & commissioning of Non return valves complete with nuts, bolts, washers, gasket confirming to IS 5312

100 mm dia

Supply, Fixing, testing & commissioning of Stainless Steel Y-strainer fabricated out of 1.6 mm thick stainless steel grade 304 sheet with 3 mm dia holes with stainless steel flanges

100 mm dia

Supply& Fixing of 63 mm dia ,15 m long RRL hose pipe with 63 mm dia male and female coupling duly wind with GI wire confirming to IS 636 ( Type-A)

Gun metal

Supply& Fixing of First-Aid Hose Reel with MS construction spray painted in Post office Red confirming to IS 884 complete with 20 mm water hose thermoplastic IS 12585

30 mtrs

Supply& Fixing of 63 mm dia gun metal short branch pipe with 20 mm nominal internal dia size nozzle confirming to IS 903

Gun metal

Providing & fixing of Air vessel 250 mm dia ,8 mm thick MS sheet,1200 mm height with air release valve on top.

providing & fixing of Pressure switch in MS line including connection

DCP-4.5 kg

CO2-4.5 kg

Supply, Installation, testing & commissioning electric driven Terrace pump suitable for automatic operation & complete in all respect.

Fire Panel

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

supply, installation, testing & commissioning of fire Control Module

Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Laying & Fixing of PVC insulated and PVC sheathed power cable 1.1 KV grade

Adding 15% contractor profit on MR total 785822.88 from S. No. 33 to 42.7

DSR-2016 Total from S. No 1 to 32.1

Rate -@9.5% below on DSR-2016+Add prevailing cost index @ 22.69%