Delhi Tourism And Transportation Development Corporation Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Delhi Tourism And Transportation Development Corporation - DTTDC Tender
Building Construction
Eprocure
Opening Date2 Sep 2019
Closing Date16 Sep 2019
Tender Amount₹ 2,38,45,782
Costs
EMD
₹ 4,76,916Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_DTTDC_179369_1Bid Award Id
ViewTender No
04/EE(WB)/DTTDC/Engg/2019-20Tender Authority
Delhi Tourism And Transportation Development Corporation ViewPurchaser Address
-Website
http://http://www.delhitourism.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, with all leads within campus at designation place :(a)All kinds of soil.
(a)Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
113
-
225.45
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering with all leads and lift within campus.
200
-
125.75
... More
Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.
23
-
917.75
... More
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
(a) All kinds of soil
3800
-
13.95
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
(a) 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
1
-
5481.95
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to all floor level : (a) 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
498
-
4209.05
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
(a) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1
-
6547.7
... More
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course / (Other surface) after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
31
-
91.9
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
(a)1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone
aggregate 20 mm nominal size).
39
-
6215.35
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
4
-
7145.8
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement :
(a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
22
-
7390.8
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
a) Foundations, footings, bases of columns, etc. for mass concrete.
78
-
193.95
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
a) Suspended floors, roofs, landings, balconies and access platform i/c its edges
20
-
422.3
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
a) Lintels, beams, plinth beams, girders, bressumers and cantilevers
80
-
342.9
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
a) Columns, Pillars, Piers, Abutments, Posts and Struts
75
-
467.85
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
(a) Weather shade, Chajjas, counter slabs corbels etc., including edges
24
-
521.75
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
(a) Thermo-Mechanically Treated bars of grade Fe- 500 D or more.
6558
-
56.6
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.(a)Thermo-Mechanically Treated bars of grade Fe- 500 D or more.
4090
-
56.6
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Avval bricks ) in foundation and plinth in:
(a) Cement mortar 1:4 (1 cement : 4 coarse sand)
70
-
4970.3
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Avval bricks ) in superstructure above plinth level up to floor V level in all shapes and sizes in : (a) Cement mortar 1:4 (1 cement : 4 coarse sand)
34
-
5801.05
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand)
57
-
618
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
57
-
56.85
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
90
-
450.35
... More
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
90
-
39.2
... More
Providing and fixing sheet covering over expansion joints with iron screws
as per design. Aluminium fluted strips 3.15 mm thick. 150 mm wide
60
-
336.65
... More
Granite work gang saw cut (polished and machine cut) of thickness 16-18 mm for wall lining (veneer work), up to 10 metre height, riser of steps, skirting dados and pillars backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the granite shade including rubbing curing moulding and polishing high gloss finish complete. (To be secured to the backing by means of cramps, which shall be paid for Separately). Jet-Black, Cherry Red, Elite Brown, CAT Eye, Lakha Red, Ruby Red, Grey or any colour and shade as approved by Engineer-in Charge. (This item also includes vertical sides of doors, windows ventilator, walls and facias i/c full edge moulding on exposed edges)
(a) Area of slab above 0.50 sqm
212
-
4469.85
... More
Granite work gang saw cut (polished and machine cut) of thickness 16-18 mm for wall lining (veneer work), up to 10 metre height, riser of steps, skirting dados and pillars backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the granite shade including rubbing curing moulding and polishing high gloss finish complete. (To be secured to the backing by means of cramps, which shall be paid for Separately). Jet-Black, Cherry Red, Elite Brown, CAT Eye, Lakha Red, Ruby Red, Grey or any colour and shade as approved by Engineer-in Charge. (This item also includes vertical sides of doors, windows ventilator, walls and facias i/c full edge moulding on exposed edges)
(a) Area of slab upto 0.50 sqm
30
-
4396.1
... More
Providing and fixing granite stone 16-18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, windows and ventilator sills & soffits, door soffit and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite (Jet-Black, Cherry Red, Elite Brown, CAT Eye, Lakha Red, Ruby Red, Grey or any colour and shade as approved by Engineer-in Charge.
(a) Area of slab upto 0.50 sqm
76
-
3351.95
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
Granite work
201
-
245.7
... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
10
-
266.25
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
6
-
427.95
... More
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately).
Stainless steel cramps
20
-
521.1
... More
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.
Fastener with threaded dia 10 mm
100
-
25.55
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 16-18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (a) Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
70
-
2937.7
... More
Providing wood work in frames of doors , windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length All complete . (Hole for dash fastner may be done in two or more different material) (A) second class teak wood
0.5
-
92743.05
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (a) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
27
-
1501.9
... More
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): (a)Rectangular or square
43
-
162.6
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
43
-
127.75
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to 80x1.20 mm M.S. laths with 1.20 mm thick top cover
6
-
1841.2
... More
Providing and fixing ball bearing for rolling shutters.
2
-
379.3
... More
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
200
-
68
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
80
-
1158.1
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
10
-
1238.2
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.
90
-
901.05
... More
Providing and fixing frame work for partitions/ wall lining etc. upto 10 metre height, made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors by welding cleats and fixed with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge.
500
-
78.45
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete as per approval & direction of Engineer-in-Charge.
125 mm
100
-
89.7
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
500
-
58.45
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (including M.S. Plate)
3500
-
67.6
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
10800
-
90.25
... More
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.
20
-
112.15
... More
Welding by gas or electric plant including transportation of plant at site etc. complete.
4000
-
2.85
... More
Providing and fixing stainless steel ( Grade 304 S1) railing grills/ gates made of Hollow tubes, channels, plates square or round bars etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing / grills / gates with necessary accessories such as railing end cover plate etc. & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. i/c all necessary fittings and accessories for railing)
3000
-
472.4
... More
Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.
30
-
5804.35
... More
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.50 metre.
15
-
18.95
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. (a)Size of Tile 600x600 mm (Double charge or more vitrified tiles).
100
-
1119.4
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
In 75x75 mm deep chase
100
-
153
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
20
-
187.6
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.(a)110 mm diameter
90
-
236.35
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. E.R.W. tubes
700
-
118.05
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
12000
-
65.8
... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (a) Two coats
600
-
73.9
... More
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.(a)Two coats
115
-
75
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(a)Single tee without door. (a)110x110x110 mm
10
-
167.6
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(a)Shoe (Plain)(a)110 mm Shoe
14
-
98
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand)
and making good the wall etc. complete.
(a)110 mm
52
-
181.4
... More
12 mm cement plaster of mix :(a)1:4 (1 cement: 4 fine sand)
70
-
172.95
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : (a)1:4 (1 cement: 4 fine sand)
230
-
200.25
... More
12 mm cement plaster of mix : (a) 1:4 (1 cement: 4 coarse sand)
150
-
180.85
... More
15 mm cement plaster on rough side of single or half brick wall of mix:(a)1:4 (1 cement: 4 coarse sand)
200
-
209.65
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
25
-
143.8
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
20
-
50.35
... More
Providing and applying plaster of paris putty of 2 mm or more thickness over plastered surface to prepare the surface even and smooth complete.
300
-
118.7
... More
Providing and applying white cement based putty of average thickness 1 mm or more of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
360
-
87.35
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material with all leads within campus at designated place as per direction of Engineer - in - charge.
(a)Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
5
-
997.05
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material with all leads within campus at designated place as per direction of Engineer-in-charge.
(a)In cement mortar
3
-
842.75
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking with all leads with in campus at designated place.
(a) Of area 3 sq. metres and below
80
-
157.85
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking with all leads with in campus at designated place.
(a) Of area beyond 3 sq. metres
6
-
216.4
... More
Dismantling tile work/stone work / Kota stone in floors and roofs laid in cement mortar including stacking material with all leads with in campus at designated place.
(a)For thickness of tiles 10 mm to 25 mm
250
-
31.55
... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
15 mm to 40 mm nominal bore
50
-
63.65
... More
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:
15.45.1 Up to 150 mm diameter
20
-
183.05
... More
Dismantling old plaster / grit wall plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with all leads with in campus at designated place.(Dismantling of wall tiles and grit wash plaster where exist also include in this item).
500
-
22.4
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond campus for all leads including all lifts involved.
500
-
120.55
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the
sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge. (a) 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern.
3500
-
638.95
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
1000
-
615.7
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
10
-
5012.62
... More
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
100
-
1907.95
... More
Providing and fixing white vitreous china water closet squatting pan
(Indian type) :
Orissa pattern W.C. pan of size 580x440 mm
11
-
1456.6
... More
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
2
-
1363.65
... More
Providing and fixing P.V.C. waste pipe for sink including PVC waste fittings complete: Semi rigid pipe
a). 32 mm dia (for wash basin)
10
-
75.6
... More
Providing and fixing soil, waste and vent pipes :(a)100 mm dia(a)Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
20
-
921.65
... More
Providing and filling the joints with spun yarn, cement slurry and
cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe
20
-
85.95
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia (a) Sand cast iron S&S as per IS - 3989
4
-
384.9
... More
Providing and fixing plain bend of required degree.(a)100 mm dia. (a)Sand cast iron S&S as per IS : 3989
10
-
334.95
... More
Providing and fixing heel rest sanitary bend 100 mm dia
(a) Sand cast iron S&S as per IS - 3989
4
-
370.95
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : (a)100 mm
50
-
309.95
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet
Sand Cast Iron S&S as per IS: 1729
4
-
848.6
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
10
-
137.85
... More
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe.
Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe)
20
-
179.4
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (a) 15 mm nominal outer dia Pipes
20
-
142.95
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (a) 20 mm nominal outer dia Pipes
25
-
179.95
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (a)25 mm nominal outer dia Pipes
15
-
216.2
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (a) 40 mm nominal outer dia Pipes
50
-
385.5
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (a) 15 mm nominal outer dia Pipes
45
-
246.2
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (a) 20 mm nominal outer dia Pipes
10
-
284.85
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work (a) 25 mm nominal outer dia Pipes
30
-
191.65
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work (a) 32 mm nominal outer dia Pipes
30
-
250.55
... More
Providing and fixing brass full way gate valve with C.I. wheel of approved quality (screwed end) :
a). 25 mm nominal bore
2
-
428.2
... More
Providing and fixing uplasticised PVC connection pipe with brass
unions : 45 cm length
15 mm nominal bore
26
-
67.8
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (white colour tripple layer)
6000
-
7.25
... More
Providing and fixing PTMT grating of approved quality and colour.
Circular type
100 mm nominal dia
6
-
32.75
... More
Cutting holes up to 30x30 cm in walls including making good the
same:
With common burnt clay F.P.S. (non modular) bricks
5
-
219.2
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : a).150 mm diameter
25
-
327.05
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : a).150 mm diameter S.W. pipe
25
-
761.85
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (a) 180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
1706.55
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
(a) 250 mm dia. R.C.C. pipe
100
-
482.05
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : (a)Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : (a)With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( Avval Bricks )
3
-
8634.1
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
(a) L D- 2.5
Rectangular shape 600x450 mm internal dimensions
6
-
1073.05
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
(a) L D- 2.5
Square shape 450 mm internal dimensions
5
-
902.1
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
(i)For fixed portion. (a)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
2750
-
391.8
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
(i)For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). (a)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
1700
-
452.4
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
(a)With float glass panes of 4.0 mm thickness
56
-
741.5
... More
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600
(a) Upto 5 mm depth and 5 mm width
750
-
96.65
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
All types of soil 300 mm dia
60
-
370.7
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge
200 mm nominal size dia
30
-
610.65
... More
Supplying, assembling, lowering and fixing in vertical position in bore well uplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
200 mm nominal size dia
30
-
821.15
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
13
-
921.9
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
5
-
1038.05
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
5
-
1038.05
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
6
-
1175.6
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
30
-
542.2
... More
Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
(a) GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
75
-
1163.9
... More
Providing and erecting 2.00 metre high temporary barricading at site as per drawing/ direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in- Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge.
(Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting it two or more times as per site requirement at site for smooth functioning due to space constraints . The barricading provided shall remain to be the property of the contractor on completion of the work).
50
-
1577.05
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
260
-
550.4
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
(a) Ridges plain (500 - 600mm)
15
-
360.45
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
(a) Gutter .(600 mm over all girth)
55
-
833.5
... More
Providing and fixing granite pencil boarder with round edges and polishing made with 70mm wide and 18mm thick granite strip (Z-black, Lakha red, ruby red, gray or any colour as approved by Engineer-in-charge) fixed with cement mortar 1:2 (1 cement, 2 coarse sand) in wall by making appropriate chases by chase cutter as per directin of Engineer-in-Charge.
375
-
309.7
... More
Providing and fixing rectified digital ceramic wall tiles (minimum size 600x300 mm) conforming to IS : 15622 of approved size (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade all complete as approved by Engineer-in-Charge.
219
-
1030.5
... More
Providing and fixing glass reinforced concrete (GRC) external wall cladding tile over 12mm thick or more thickness as per site requirement i/c rough plaster of cement mortar 1:3 (1 cement : 3 coarse sand) and fixing tile over plaster by cement mortar 1:2 (1 cement 2 : fine sand) having horizontal and vertical groove up to 10 mm wide finished with flush / ruled pointing admix with pigment of any colour as per direction of engineer-in-charge. Aluminium angle 25 mm x 15mm and 3mm thick shall be fixed with 50mm long screws to the wall after every 6th course to hold the tile.
624
-
2130.3
... More
Providing and fixing ISI marked factory made flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, factory fixed / pasted 1.5 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS 2046 Type S, including cost of adhesive of approved quality on both faces of shutter, cutting vision panel upto 0.10 sqm, cutting rebate and edge painting of required colour (payment for vision panel and rebate shall be paid separately) (a) 35 mm thick (excluding the thickness of lamination ) including ISI marked Stainless Steel butt hinges with necessary screws (Minimum 4 nos. 125x64x2.50 mm stainless steel but hinges to provided per shutter leaf.)
71
-
3337.4
... More
Providing and fixing 6 mm thick exterior grade high pressure laminates in accordance with EN 438-6 EDF with CNC perforation in the approved pattern and design. Exterior grade high pressure laminates are fixed with double sided adhesive tape 3M or equivalent and structural silicon which is mounted on to aluminium substructure made of Aluminum tube of 14 gauge of size 50mm x 25mm & 25mm x 25mm in the grid of 600mm x 600mm or as required as per site requirement which are again fixed on to the wall using angle brackets as per requirement & design . The aluminum substructure has to be adhered to the national standards and has to be installed in accordance with the manufacturer specifications for the substructure. It should be scratch resistant, solvent resistant, and impact resistant EN ISO 178, self-supporting, Frost resistant, heat resistant and fire retardant. The décor paper is rated 7-8 on Blue wool scale and 3-5 on Grey Scale hence making it fit to be used in interiors. Sizes of cladding shall be as per approval of Engineer-in-charge. (This item include all operations along with aluminium sub structure and filling groove with silicon)
225
-
4185.6
... More
Providing and fixing vitrified wall tiles (Size 1200x200 / 1200x300 mm or others sizes of same specifications as per requirement of Engineer-in-charge/Architect.) conforming to IS : 15622 of approved size (thickness to be specified by the manufacturer), of approved make, in all colours, shades pattern as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade all complete as approved by Engineer-in-Charge.
581
-
1503.55
... More
Providing and fixing coil coated (panels shall be finished on exposed side with 20 microns polyester coil coating over primer and on the rear side with a wash coat) false ceiling system comprising of 150 mm wide PERFORATED panels of size 150mm width x 17mm deep roll formed out of 0.50mm thick Polyester Coated Galvnised Steel and fixed on steel carrier / strigers of size 34.5mm wide x 48mm deep manufacturedf out of 0.60 mm thick pre-coated galvansed steel shall be fixed directly to the steel purlin / flange / roofing with prongs to hold the panels in a module of 75/150 mm. The panel lenght shall be 6 metre or approved size and panel shall be jointed with special GI Splice in between two pane, all complete as per direction of Engineer-in-charge.
667
-
1912
... More
Providing and fixing galvanised iron decking sheet 0.8mm thick in trapazoidal profile having profile depth of 44mm & overlaping between two sheets should not be less than 150 mm across the profile patterns and should not be less than two profile or 150 mm along the profile patterns including providing ,laying and fixing one layer of IRC fabric of square mess size 50x50 mm made up with 4mm thick wire laid above deck sheet and fixed with necessary self driven GI screws and including fixing TMT Bars studs of 12 mm dia 150 mm long on every corugation rest on steel girder by welding. One bar of 12 mm steel reinforcement shall also be welded on studs (The payment of steel reinforcement and studs weight etc shall be paid in corresponding item of rainforcement in Agreement.) all complete as per direction of Engineer -in-Charge.
30
-
1319.8
... More
Providing and fixing 4mm thick aluminium composite panel exterior grade (0.5mm PVDF coated Aluminium skin on top & bottom plus 3mm thick polyethylene core) on/all-round RCC/Brick column/wall /Fascia’s /M.S Aluminium sections Structure /dead walls/under side sky light upto all heights in required colour/pattern & panel size as per drawing fixed on aluminium extruded standard tubular sections of size 38X25X1.6 mm of approved make(Jindal/Hindalco/Indalco) conforming to IS: 733 and IS : 1285, fixed at 600 mm center to center with rawl plugs and screws or with fixing clips, or with expansion hold fasteners Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, C.P. brass / stainless steel screws, with 12 mm (wide)X20 mm (deep) groove in joints of panels including filling the joints with weather silicon sealant of Dow corning 789 or equivalent of approved colour including 10mm dia backer rod. The rate shall include cost of ACP Panel, subframe of aluminium section for fixing of ACP ,Weather Sealant, structural sealant/ adhesive tape, masking tape, primer/ Gasket/ Foam/ Scaffolding/ Aluminium cleats with screws complete including making openings as required at site like electrical fittings, recess for pipe etc., all necessary, tools and plants, scaffolding and as per manufacturers technical specifications, complete and as per the direction of the Engineer in Charge. (Surface area of aluminium composite panel shall be measured for payment).
30
-
4227.95
... More
Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
5
-
2853
... More
Providing and fixing Stainless steel (Grade: 304) casement stays of size 250 mm (straight peg type) with necessary screws etc. as per approval & direction of Engineer-in-charge all complete :
100
-
205.57
... More
Providing and fixing Stainless steel (Grade: 304) sliding door bolts of size 250x16 mm with nuts and screws etc. as per approval & direction of Engineer-in-charge all complete
50
-
491.24
... More
Providing and fixing Stainless steel (Grade: 304 S1) tower bolts of size 200x10 mm with necessary screws etc. as per approval & direction of Engineer-in-charge all complete
100
-
83.2
... More
Providing and fixing Stainless steel (Grade: 304 S1) tower bolts of size 125x10 mm with necessary screws etc. as per approval & direction of Engineer-in-charge all complete
80
-
65.26
... More
Providing and fixing Stainless steel (Grade: 304) Twin rubber type hanging floor door stopper with necessary screws etc.as per approval & direction of Engineer-in-charge all complete
30
-
135.63
... More
Extra for Providing Toughened glass in windows instead of ordinary float Glass of 4 mm.
56
-
580
... More
Providing and fixing glazing with 5mm thick clear acrylic sheet in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. all complete as per the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
40
-
1500
... More
Providing and fixing green chalk board 2400x1200 as approved with all necessary fittings including aluminium beading around cornice with 12 mm ISI commercial ply and 1 mm aluminium sheet as per direction of Engineer-in-charge.
15
-
10798
... More
Credit of old steel doors, windows, ventilators and others steel items related to doors, windows and ventilators.
3000
-
25
... More
Dismantling including credit of toilet fittings from toilet block. (Rate is for one toilet block).
3
-
500
... More
Credit for demolishing of existing porta cabin, removal of demolishing materials i/c removal of false ceiling, C.G. Sheet trusses PVC wall panelling flooring and foundation etc. complete and disposal of unserviceable and serviceable material from site as per direction of Engineer-in-charge. (material received from demolishing of prota cabin shall be property of contractor)
1
-
18971.1
... More
Electric Work
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. PVC insulated copper conductor single core cable etc as required.
- Group C
85
-
757
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. - Group C
45
-
415
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required
a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
140
-
112
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required
a) 4 X 1.5 sq. mm + 2 X 1.5 sq. mm earth wire
35
-
178
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required
180
-
168
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
20
-
281
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
75
-
227
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed Heavy Class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required
4
-
809
... More
Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
25 mm dia.
120
-
69
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
16
-
313
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
20
-
406
... More
Supplying & fixing of modular blanking plate on the existing modular plate & switch box excluding modular plate etc. as required.
10
-
24
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
52
-
100
... More
Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including connections etc. as required.
24
-
58
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length( upto 30cm) with 1.5 sqmm FRLS PVC insulated, copper conductor, single core cable etc as required.
48
-
105
... More
Supplying and fixing extra down rod of 10 cm length G.I. pipe,15mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
64
-
22
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required
Upto 450 mm sweep
5
-
224
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
8
-
288
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) - 12 way, Double door
5
-
1151
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. - 63 Amps
11
-
254
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. - 40 Amps
4
-
222
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. - Upto 35 sq. mm
50
-
18
... More
Supplying & fixing 5 amps to 32 amps rating 240 volts C series, Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) Single Pole
74
-
173
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. - Upto 35 sq. mm
170
-
25
... More
Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. - 2 X 10 sq. mm
12
-
158
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
360
-
23
... More
Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. - 4 X 25 sq. mm
4
-
258
... More
Supplying, installation, testing & commissioning of LED street light wattage of 40-45 W IP66 with minimum system lumen output of 3400 lumena, CCT 5500K, CRI 70 and efficacy of minimum 85 lumen / Watt having pressure diecast aluminium alloy housing, life of LEDs should be 50,000 burning hrs. Surge protection upto 4kV with heat resistant toughened glass / polycarbonate complete with all accessories etc as reqd. make OSRAM Cat No. STRADA PLUB CW or equivalent in PHILIPS/GE/ZUMTOBEL
4
-
80000
... More
Supply of recessed LED Light fixture of size not less than 590x590x77 mm having minimum lumen out put of 3300 lumens & maximum 43 watt, driver efficiency more than 80%, pf-more than 0.9, shall have elegant, CRCA powder coated housing body with high transitivity opal diffuser cover etc. The fixture shall have in-built protection against over voltage, short circuit , over load and mis-wiring with high efficiency and low power-loss. The fixture sahll be suitable for WHITE LIGHT(5700 - 6500K), CRI80, color light. The fixture, complete with its driver etc as required. make philips-RC365BLED33-5000PSU ODYH, OSRAM LUX POWER F, GE-GCR043-56NO(42W), Zumtobel-MELLOW Light V LED(39W)
52
-
6359
... More
Supply of recess mounted LED downlighter having minimum lumens output of 1200 lm and minimum efficacy of 100 lm per watt and maximum power 14 Watt. The fixture has Mid Power LED's integrated with an efficient optical system to provide high DLOR. Construction of fixture is High Efficiency White Reflector along with High Transitive in Diffuser, CRI 70 and color 6500K complete with all accessories etc. as reqd. Make: Philips (Model No.: DN193B) or equivalent in GE / Trilux / Zumtobel.
24
-
1749
... More
Supplying of 1200mm ceiling fan BEE 5 star rating complete with down rod,blades,canopy etc but without regulator etc. as reqd.
48
-
2612
... More
Supply of 300mm sweep heavy duty exhaust fan complete etc. as required.
5
-
3434
... More
Supply of following sizes of XLPE insulated Aluminum conductor Armoured cable, 1.1 KV grade cables conforming to relevant IS code and technical specifications. - 4 X 25 sq mm. XLPE insulated Al. conductor armoured cable
100
-
250
... More
Supply of following sizes of XLPE insulated Aluminum conductor Armoured cable, 1.1 KV grade cables conforming to relevant IS code and technical specifications. - 2 X 10 sq mm. XLPE insulated Al. conductor armoured cable
170
-
110
... More
Providing and fixing of CO2 gas type 4.5 Kg Fire Extinguisher duly ISI marked IS:2878 complete with one meter wire breaded hose pipe with horn i/c providing suitable mounting arrangement etc. complete as required.
10
-
11994
... More
Providing and fixing of 6.0 capacity ABC stored pressure type Fire Extinguisher duly ISI marked IS:13849 with nozzle and delivery hosecomplete in all respect etc. complete as required.
10
-
5771
... More
Total
10
-
500
... More
Add Cost Index Item (15.69-9.50 = 6.19 %) Sl. No. 1 to 138 & 160 to 187, @ 6.19 % on Rs. 1,66,75,893/-
10
-
500
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements