Delhi State Industrial And Infrastructure Development Corporation Limited Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Costs
EMD
₹ 2,23,360Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Maintenance Of Dsiidc Head Quarter And Bcd Emporia Building At Connaught Place, New Delhi (civil And Horticuture During 2022-23)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_DSIDC_225364_1Bid Award Id
ViewTender No
NIT No. 19/EE(CD-IV)/ DSIIDC/2022-23 (Re-invite)Tender Authority
Delhi State Industrial And Infrastructure Development Corporation Limited ViewPurchaser Address
-Website
http://http://www.dsiidc.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Engaging beldars for working as helper with mason , plumber, carpenter, and sewer man also attending day to day complaints received from N-36 Head quarter Building, Connaught place and BCD Emporia building at Baba kharak Singh Marg, New Delhi as and when required by the Engineer-in-charge(working time will be 9:00AM to 5:00PM)
312
-
876
Attending day to day complaints relating to Carpenter/Fitter , such as making and fixing of door shutters, fixing of tower bolts, door closer, sliding door bolts, and repair of furniture etc. including all required necessary tools of carpenter in N-36 Head quarter Building, Connaught place and BCD Emporia building at Baba kharak Singh Marg, New Delhi as and when required by the Engineer-in-charge(working time will be 9:00AM to 5:00Pm)
156
-
1151
Attending day to day complaints relating to sanitary fitter/Plumber such as fixing of bib cock, pillar cock, GI pipes, PE-Al-PE pipes with fittings gate valve, and overhead tank etc. including all required necessary tools for plumbing work in N-36 Head quarter Building, Connaught place and BCD Emporia building at Baba kharak Singh Marg, New Delhi as and when required by the Engineer-in-charge(working time will be 9:00AM to 5:00PM)
156
-
1151
Supply of Material White cement
0.05
-
14600.91
Cement
0.2
-
7430.82
Bright finished or black enameled mild steel screw 25mm
4
-
48.24
Bright finished or black enameled mild steel screw 20mm
4
-
41.72
Stainless steel screws 50 mm
4
-
338.95
Stainless steel screws 40 mm
4
-
271.16
Stainless steel screws 30 mm
4
-
234.66
Stainless steel screws 20 mm
4
-
156.43
Aluminium butt hinges 100 x 75 x 4mm
2
-
521.46
Anodised aluminium sliding door bolt 250 x 16 mm
10
-
169.47
Anodised aluminium tower bolt ( Barrel type ) 250 x 10mm
2
-
638.79
Anodised aluminium tower bolt ( Barrel type ) 200 x 10mm
2
-
508.42
Anodised aluminium handle 125mm with plate 175 x 32mm
2
-
430.2
White plastic seat ( solid ) with lid C.P. brass hinges and rubber buffers
4
-
430.2
Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all fittings & fixtures, seat cover etc
2
-
12384.7
Float glass sheet of nominal thickness 5.5mm ( weight not less then 13.50 kg/sqm)
20
-
638.79
Aluminium hanging floor door stopper with twin rubber stopper
25
-
35.2
Hydraulic door closer tubular type aluminium section body
15
-
366.33
Mirror of superior glass 60 x 45
10
-
404.14
Hard board 6mm thick
2.7
-
156.43
Fleaxible ( coil shapped ) PVC pipe for sink & wash basin 32 mm dia with length not less then
20
-
39.11
Neoprene EPDM rubber gasket
30
-
26.07
Double action hydraulic floor spring with stainless steel cover plate
20
-
2020.67
C.P. Brass waste 32mm
25
-
104.3
15 mm nominal bore and 30 cm length PVC connection pipe with P.T.M.T. Nuts
40
-
41.72
15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts
40
-
44.32
100 mm grating with waste hole
30
-
27.38
PTMT extension nipple 15mm
20
-
24.77
Nylon sleeves & wooden screws ( 40 mm )
300
-
2.61
Coarse sand (zone III)
1
-
1564.38
Fine sand (zone IV)
1
-
990.77
Adjustable Vetrious China Cistern with fittings
10
-
2607.31
CPVC pipe 20mm
30
-
70.4
CPVC pipe 50mm
8
-
349.38
Calcium silicate tegular edged celling tiles 595x595 mm and 15mm thick on edges
36
-
1121.14
CPVC Elbow 20mm (female thread)
10
-
54.75
CPVC Plain elbow
10
-
13.68
CPVC Plain tee 20 mm
10
-
21.9
CPVC Socket 20mm
10
-
10.95
CPVC socket 20mm ( Male thread )
10
-
82.13
CPVC Threaded tee ( Female ) 20mm
10
-
68.45
CPVC union 20mm
10
-
54.75
CPVC elbow 50mm
10
-
102.66
CPVC elbow 40mm
10
-
109.51
CPVC tee 50mm
10
-
301.14
CPVC reducer 50 X 20
3
-
225.86
CPVC reducer 40 X 20
10
-
130.04
CPVC union 50mm
10
-
383.27
CPVC ball valve 20mm
2
-
136.88
Araldite
2
-
1026.63
Elfie
20
-
27.38
M seal
1
-
314.84
CPVC solvent
2
-
1450.97
Soft close hinges of hettich or equivalent
150
-
200.77
Soft close telescopic drawer channels 510mm long.
12
-
745.68
Soft close telescopic drawer channels 350mm long.
80
-
711.79
Liquid soap holder of Jaquar make ( product code ACN-1131N )
5
-
749.6
Liquid soap dispenser with glass bottle of Jaquar make ( product code ACN-1135N )
5
-
1564.38
Towel ring square with round flange of Jaquar make ( product code ACN-1121N )
5
-
1140.69
Health faucet with 8mm dia 1.2m long flexible tube with wall hook of Jaquar make ( product code ALD-573 )
6
-
1759.94
Toilet roll holder with stainless steel of Jaquar make ( product code ACN-1153S )
5
-
1368.84
Angular stop cock of Jaquar make ( product code QQT-7053 )
5
-
1759.94
Pillar cock of Jaquar make ( product code QQT-7011 )
5
-
2216.21
2 way bib cock of Jaquar make ( product code QQT-7041 )
5
-
2737.67
Maintenance work Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth unto 50 m and lift up to 1.5 m, as directed by Engineer-in-Charge: All kinds of soil
38.4
-
53
Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
15
-
225.45
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
16.02
-
125.75
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size)
2.88
-
5481.95
1:4:8 (1 Cement : 4 coarse sand(zone-III) : 8 graded stone aggregate 40 mm nominal size).
3.84
-
4478.15
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1.1
-
6547.7
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
1
-
7145.8
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
0.32
-
7390.8
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform.
3.24
-
422.3
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
8
-
342.9
Edges of slabs and breaks in floors and walls. Under 20 cm wide
4
-
122.2
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
132
-
56.6
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
2.21
-
4751.65
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
1
-
5582.85
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
2.25
-
684.2
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, molding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm.
5.58
-
3113.3
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
0.78
-
92743.05
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
4.14
-
74.35
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
9.45
-
2488.95
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
9.45
-
365.85
Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 fine sand) and making good the walls etc.
90
-
21.85
Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, including priming coat on unexposed surface with: Decorative veneer facings of approved manufacture.
28.75
-
1030.7
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm
20
-
313.2
100x10 mm
20
-
132.1
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
10
-
556.45
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight unto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.
5
-
414.45
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight unto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.
5
-
388.4
Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality with necessary screws etc. complete. Size 65 mm
30
-
208
Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm
30
-
211.85
100 mm
30
-
182.45
Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm
5
-
189.2
Providing and fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm
15
-
88.1
100x10 mm
15
-
49.2
Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm
20
-
51.1
100 mm
20
-
45.1
Providing and fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper
20
-
38
Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.
22.8
-
64.35
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick.
15.12
-
518
Providing and fixing plain lining with necessary screws/nuts & bolts/nails including a coat of approved primer on one face and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately) 12mm thick commercial ply conforming to IS : 1328 BWR type.
28.75
-
1074.65
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
810
-
67.6
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick.
57.6
-
1158.1
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
6.4
-
1238.2
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
50
-
744.8
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.
14.04
-
901.05
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
108.81
-
1119.4
Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm
108.81
-
-466.45
Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.
108.81
-
386.2
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement :3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
6
-
187.6
Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : Red sand stone slab 40 to 50 mm thick
4
-
560.05
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. 110 mm diameter
20
-
236.35
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Coupler 110mm
6
-
102.65
Single tee with door 110x110x110 mm
4
-
181.55
Single tee without door 110x110x110 mm
2
-
167.6
Shoe (Plain) 110 mm Shoe
2
-
98
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
8
-
40.9
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering unto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I.
92.12
-
806.2
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( + 0.05 %), total coated thickness with zinc coating 120 gm per sqm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length unto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete unto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
72.6
-
550.4
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
612
-
160.35
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
150
-
118.7
Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier of size 10x38x10mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000mm c/c Inverted triangle shaped Spring Tee having height of 24 mm and width of 34mm made of GI steel 0.45 mm thick is then fixed to the main 'C' carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip intiles into spring 'T' with : GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.
14.04
-
1527.25
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).
1512
-
96.05
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm
1092.12
-
98.95
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.
115.2
-
78.4
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
879
-
87.35
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1cement: 4 coarse sand).
10.8
-
274.8
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
879
-
10.8
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
3
-
55.45
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia. M.S. tube 1.5m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.
648
-
160.15
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
4.08
-
997.05
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
2.72
-
615.15
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.. In cement mortar
0.69
-
842.75
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area 3 sq. meters and below
5
-
157.85
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead: Of area 3 sq. meters and below
5
-
61.25
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Of sectional area below 40 square centimetres.
290
-
7.7
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
300
-
2.4
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm
210.32
-
31.55
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50metres lead : Thickness above 25 mm up to 40 mm
78.75
-
38.75
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter
20
-
183.05
Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
6
-
391.2
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.
879
-
22.4
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
116.66
-
24.3
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
50
-
120.55
Supplying at site : R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge (cost of earth works in excavation, concrete works in foundation to be paid separately).
0.72
-
19774.55
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
2
-
3494.2
Providing and fixing Stainless Steel A Isis 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 178 mm.
1
-
3714.25
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
5
-
795.15
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm
2
-
752.8
Rectangular shape 1500x450 mm
1
-
1323.1
Providing and fixing soil, waste and vent pipes : 100mm dia pipe Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989.
50
-
921.65
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia. Pipe
20
-
167.35
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 3989
7
-
384.9
Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS : 3989
10
-
334.95
Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron S&S as per IS - 3989
2
-
370.95
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm Sand cast iron S&S as per IS - 3989
3
-
623
Providing and fixing single equal plain junction of required degree : 100x100x100 mm Sand cast iron S&S as per IS - 3989
4
-
575.4
Providing and fixing sand cast iron S&S off sets as per IS: 1729 152 mm off sets With 100 mm dia Pipe
2
-
564.55
Providing and fixing collar: Sand cast iron S&S as per IS - 3989
7
-
351.2
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: 100 mm
60
-
309.95
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989.
6
-
1034.45
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms.
4
-
82.55
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 100 mm diameter pipe
50
-
40.65
Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal.
3
-
15040.75
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/ make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc. including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
2
-
12612.65
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia .Pipes.
20
-
284.85
25 mm nominal outer dia .Pipes.
30
-
333.6
32 mm nominal outer dia .Pipes.
10
-
412.9
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 20 mm dia. nominal bore
15
-
186.3
25 mm dia. nominal bore
30
-
205.85
32 mm dia. nominal bore
30
-
247.4
40 mm dia. nominal bore
15
-
301.05
50 mm dia. nominal bore
5
-
342.7
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore
2
-
394.15
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
3
-
428.2
20 mm nominal bore
3
-
396.55
32 mm nominal bore.
2
-
500.75
40 mm nominal bore
2
-
584.7
50 mm nominal bore
2
-
749.9
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore
4
-
327.05
25 mm nominal bore
4
-
331.95
Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore
10
-
59.4
45 cm length 15 mm nominal bore
10
-
67.8
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 50 mm diameter pipe
25
-
14.8
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 50mm nominal bore
4
-
384.9
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tankCircular tank
1000
-
7.25
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
6849.6
Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)including disposal of malba.
2.25
-
134.55
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm diameter
15
-
423.35
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 200 mm diameter S.W. pipe
15
-
656.6
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter
1
-
391.15
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
162
-
355.2
Powder coated aluminium (minimum thickness of powder coating 50 micron)
66
-
384.5
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
48.6
-
444.9
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
12.6
-
1003.95
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness.
5
-
2054.4
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hoursb)Second layer of slurry of cement @ 0.242 kg/sqm mixed with waterproofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
14.04
-
298.3
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
7.5
-
5583.8
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick
150
-
417.1
Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.
150
-
76.65
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter- locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile, rotary stitched double webbed white with 6 mm reveal profile (white/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles
100
-
1761.15
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality0.8mm thick. .
33.21
-
923.43
Providing and fixing 18mm thick Commercial ply ( Century / greenlam or equivalent) conforming to IS: 1328 (type-1) for plain lining / wall cladding / Table, side unit, cupboard counter/Drawer/ partition etc. with necessary screws etc. Complete as per direction of Engineer-in-charge.
21.28
-
2630.22
Providing & fixing 6mm thick commercial plywood ( Century / greenlam or equivalent) for plain lining / wall cladding / Table, side unit, cupboard counter/Drawer/ partition etc. with necessary screws etc. with nails, screws etc. complete making for wall cupboard , counter etc. and as per direction of engineer-in- charge
12.96
-
1192.33
Providing Soft close hinges of hettich or equivalent ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc. for cupboard counter , tables etc. all complete as per direction of Engineer-in-charge.
20
-
282.46
Providing and fixing Soft close telescopic drawer channels of hettich or equivalent 510 mm long fixing with necessary screws etc. for cupboard counter , tables etc. all complete as per direction of Engineer-in-charge.
30
-
847.78
Providing and fixing Soft close telescopic drawer channels of hettich or equivalent 350 mm long fixing with necessary screws etc. for cupboard counter , tables etc. all complete as per direction of Engineer-in-charge.
30
-
810.79
Providing and fixing Stainless Steel handles 40x10mm and 600mm long grade 304 of approved quality & make with i/c all necessary required fitting all complete as per direction of Engineer-in-charge.
12
-
3389.99
Providing and fixing Liquid soap holder of approved make all complete as per Direction of Engineer-in-charge.
4
-
837.26
Providing and fixing Liquid soap dispenser with glass bottle of approved make all complete as per Direction of Engineer-in-charge.
8
-
1726.4
Providing and fixing Towel ring square with round flange of approved make with concealed fittings arrangement all complete as per Direction of Engineer-in-charge.
5
-
1302.52
Providing and fixing Health faucet with 8mm dia 1.2m long flexible tube with wall hook of approved make all complete as per direction of Engineer - in - charge.
6
-
2229.7
Providing and fixing toilet roll holder with stainless steel of approved make all complete as per Direction of Engineer-in-charge.
6
-
1802.9
Providing and fixing angular stop cock of approved make all complete as per Direction of Engineer-in-charge. 15mm nominal bore
10
-
1966.8
Providing and fixing pillar cock of approved make all complete as per Direction of Engineer-in-charge. 15mm nominal bore
5
-
2464.72
Providing and fixing 2 way bib cock of approved make all complete as per Direction of Engineer-in-charge. 15mm nominal bore
4
-
3033.78
Providing and fixing sink cock with regular swinging spout (wall mounted model) with wall flange of approved make all complete as per Direction of Engineer-in-charge. 15mm nominal bore
2
-
3389.44
Providing and fixing thin rim table top basin 525x415x140 mm of approved make including making all connections but excluding the cost of fittings. all complete as per direction of Engineer-in-charge.
2
-
8986.26
P/F CPVC ball Valve of approved quality as per direction of engineer in charge :(a) 20 mm nominal bore
3
-
222.77
P/F CPVC ball Valve of approved quality as per direction of engineer in charge :(a) 25 mm nominal bore
3
-
380.67
P/F CPVC ball Valve of approved quality as per direction of engineer in charge :(a) 32 mm nominal bore
3
-
653.61
Providing/Fixing high quality roller blinds ( Zebra type or equivalent design) of "Vista or equivalent in color and design as approved by engineer in charge properly weaved and finished , with the bottom pocket of same having suitable rod in the pockets & properly sealed from both sides. and top of the blinds good quality roller arrangement . The roller arrangement of blinds to be controlled by endless ball chain with gear mechanism etc. complete as per direction of engineer in charge.
30
-
4054.51
Providing/Fixing high quality etching film 100 micron thick of approved make in color and design pattern as approved by Engineer in charge
45.9
-
853.59
Providing and fixing rubber wood lipping/ moulded beading of size 18mm fixed with wooden adhesive of approved quality on the edges of the Commercial blackboard/ plywood as per direction of Engineer-in-charge.
32
-
25.61
Melamine polishing on wood work (Two or more coats on new works including a coat of wood filler.).
736.56
-
388.61
Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/ scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work)
576
-
26.53
credit for door window
5
-
50
credit for M.S. Steel
200
-
20
credit for old aluminium
15
-
70
credit for floor spring
10
-
100
credit for door closer
10
-
50
Horticulture work Providing of one no. mali/ Helper for Horticulture work at N-36, DSIIDC Connaught Circus Head Office Maintenance of parks, planters, bads, potted plants, etc. watering, hoeing, prumming, manureing and replaceing painting as per direction and all maintenance activities completed as per direction of Engineer-in-Charge/Assistant Director (Horticulture). for period of 1 year. (Rates are inclusive of loading , unloading and transportation charges).
312
-
862
Add Cost index 15.69% on DSR-2016
1
-
357547.68
Deduct -Less 9.50% on DSR-2016
1
-
250455.43
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements