Delhi State Cancer Institute Tender

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

300x10 mm

Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :

GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing & Fixing 4 mm thick aluminium composite panel /panes approved shade & pattern of INDO BOND or equivalent make (exterior grade), the 3mm thick plastic sheet sandwitched between two skins of 0.50 mm with thermoplastic core of mid low density poythene ACP to be fixed over frame including the cost of cutting bending and fixing of ACP sheets, scaffolding etc., complete as per direction of Engineer-in-Charge.( Aluminium frame work to be paid for separately)

Refixing of metal false ceiling by removing damaged/unlevelled existing panel steel coated ceiling system (600x600mm) i/c straightening ,rearranging/ levelling of suspension system i.e. existing G.I. Runner GI rod ,Hold clamp ,Pressure clip and powder coated edge profile /supportive angle.The ceiling tiles or panel shall be snapped into the runner properly i/c the cost of making openings of light fittings ,grills, diffusers, cut out made with frame of perimeter channels suitably fixed i/c required platform/scaffolding etc. all complete as per direction of Engineer-in-charge but excluding the cost of material, which shall be supplied by the department.

Spray painting (one or more coats) on old work with DUCO paint or equivalent automotive paints on steel surface including cartage of spray machine, all specialized labour for all heights complete as per direction of Engineer-in-charge.