Delhi Jal Board Tender

S/O M.S. clamp of 800mm long 12mm thick complete with nut and bolts and washers for holding the 80mm dia pipe including bending and shaping etc. as required.

S/o GI bend with both ends having welding flange of size 80 mm dia. Make of Flange –ISI, Make of Pipe: Jindal /Tata/ DJB Approved

S/o 50% Neoprene Rubber insertion / Jointing sheet of size 6 mm thick Make: Jyoti/National/ DJB Approved

S/o Required off Size full threaded, MS, nut-bolts 5”/8, Length=3 inch - of good quality as per site requirment

S/o G.I Tail Piece of 80mm dia, 1 mtr. Long size medium class completed with one end threaded and one end welded with flange as per sample. Make of Flange –ISI, Make of pipe: Jindal /Tata/ DJB Approved .

S/o Fabrication hut/ Cubicle Starter Panel of size 1250 X 1250 X 450 mm (minimum) made out of 16 SWG on an angle iron frame of 40X40X5mm thick having four legs 600mm high for grouting in earth and MS Sheet dully fixed with nut and bolts for installation of electrical energy meter. CRCA sheets, Indoor type duly painted with powder coating process suitable for 30 HP Motor / Pumps for Star Delta starting system with fully automatic time based operation of the Motors / Pumps. The panel having suitable provisions for mounting / fixing of following switchgears, control gears and instruments and complete with the material as below duly installed with their complete connections and inter connections with copper cables / bus bars etc. as per requirement. Make of following insertions / Material:- L&T / Schneider / C&S / BCH / DJB Approved MCCB of rating 100 Amp, 4 Pole, 25KA, 415V, AC.- 01No. Contactor 50 A, TP, 415V AC (MNX 50 or equivqlent)-2 Nos. Contactor 40 A, TP, 415V AC (MNX40 or equivalent)-1No. Timer for starter -1 No. Add on block 1 No + 1 NC -2 Nos. Overload Relay for 30 HP -01 No. Voltage unbalance Relay -01 No. Push Buttons with contact Block for On/Off -02 Nos. Ampere Meter Digital type. -01 No. Volt Meter Digital type. -01 No. Ampere Meter selector switch. -01 No. Volt meter selector switch. -01 No. Indicating Lamp, Led type for phase indiaction -03 Nos. Indicating Lamp, Led type for On/Off -02 Nos. MCB, 6 Amp, SP, ‘C’ Curve. -03 Nos. Current Transformer 100/5 ampere. -03 Nos. Automatic Phase changeover system in case of phase reversal – 1 set Automatic System for time based operation of starter – 1 no. Protection against voltage /phase unbalance-1 No. Auto Manual switch -1 No Earth leakage single phase protection

Installation of the new Incomer Panel at site including providing of the all material required for fixing the panel.

Making the required incoming power supply connections between main supply and new incomer panel by connecting the existing cable after relaying of cable and re thimbling of cable ends as per requirement.

S/o Canvas Hose pipe 80mm dia Make : Jyoti / ISI

Lowering of Submersible pumpset with pipe and other accessories, Connection of cable, Installation of electric panel, Grouting of electric panel digging and fixing the same with the help of CC and lying of GI pipe from bore to panel executing minor Civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. Testing and commissioning of all E&M equipments on No load and full load conditions as per standard and full satisfaction of Engineer-in-charge.This is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid.