Delhi Jal Board Tender

Providing of MS full threaded Nut bolts off sizes as per site requirement.

S/o Submersible Pump Set of 7.5 HP/ 15 stage, head 89-124-133, Discharge 200-125-75, Make: SU/ BS/ Skope/ DJB approved

Providing G.I. 900 x 50 mm dia. bend having flange at both ends (Heavy duty).

P/o M.S. clamp of 600 mm length duly fabricated from 12.5mm thick 75mm wide M.S. plate for holding the pipe of 50mm dia.

Providing of double flange G.I. column pipe 50 mm dia., medium class, each of 3 mtrs Long duly threaded on both ends, welded & fitted with G.I. flange on both ends welded with three nos. support strip at each end between flange and pipe, withtwo slots for sub cable in each flange. Make of pipe: TATA/Jindal.

Providing of Rubber packing for 50 mm dia. Flange. NOTE :- The Installation/ Testing/ Commissioning of above E&M equipments shall be done by departmentally

S/o Hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with suitable size MS angle iron with 16 SWG M.S. sheet, having horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double door and S.S hinges along with double locking arrangement, having fabricated MS angle iron frame for mounting of switch gears such as RCCB, MCCB, RYB indicating lights, selector switch, ampere meter, volt meter and electrical energy meter etc i/c painting having following items ;MCCB 63 Amp, 4 Pole, Breaking capacity at 415 V: 25 kA, adjustable thermal setting (70- 100%) and fixed magnetic settings. Confirms to IEC: 60947-II/IS: 13947-II, RCCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically in the event of earth leakage, Sensitivity: 300 mA, Confirms to IEC: 61008-I/IS: 12640-I, Fully automatic star delta starter of 10HP, 3Phase oil immersed type, Ampere meter 96mmx96mm square shape of 0-30 Amp range, Voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch, LED Indicating lamps with fitting (a set of 3 lamps), Shunt capacitor of 10 KVAR MPP type with three phase isolator withsuitable banking ,Panel Should have Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection, High voltage-low voltage protection. Time delay power on Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P. Make :- Gainguard/ S.Guard , Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc as required. The panel board shall be mounted on the base frame of 2 feet height made of 50x50x6mm angle iron frame. DSR 10.2.1, Make:-The entire insert used in Panel must be of DJB approved makes wherever applicable