Delhi Jal Board Tender

Breaking the RCC foundation by hammer, chisel electric vibrator by labor etc as required.

S/o Horizontal split casing pump capable of giving discharge 210-250 m3/hr at 40-45 mtr. head fitted with C.I. impeller with standard fitting suitable with 40HP motor. Make: Kirloskar/ M&P/ DJB approved.

S/o 40HP 1450 -1600 rpm 3 phase, 415 V TEFC squirrel cage foot mounted electric induction motor. Make kirloskar/ ABB/Crompton/DJB approved make.

S/D STARTER FOR 40HP PUMP SET: Supply and fixing of LT panel box having sheet enclosure made out of 16 SWG sheet for main incomer of supply by electricity board and size 950x1100x300mm , totally enclosed ,power coated free standing floor mounted type, dust & vermin proof, out ward opening door having hidden hing and bolted back cover both using non-deterio rating neoprene rubber gasket. The various components and sub equipment of the panel will be shaped out of high conductivity electrolyte aluminium conductor 150AMP. and shall be liberal size. The control wiring of the panel will be done with PVC flexible wire of 1.5 mm2 each wire will be terminating a ferule crimped to the wire having the following components.:- MCCB, 160A 3P ,50KA breaking cap, suitable for motor protection Make :- L &T/ SCHNEIDER, Rotory Handle for MCCB160 Amp 3P Make :- L &T/ SCHNEIDER, Spreader Link For MCCB 125 Amp 3P Make :- L &T/ SCHNEIDER, 125 Amp C/O Switch 4Pole Make :- HPL/ C&S/ HAVELLS, Digital Amp Meter CTR /5 96 sqmm Make :- L &T/ SCHNEIDER, Digital volt. Meter ctr 96sqmm 0-500 VAC Make :- L &T/ SCHNEIDER, Indicating lamp set for RYB/ ON OFF/trip 230 VAC Make DJB approved, SP MCB 6A for Control CKT Make :- L &T/Havells, Current transformer 150/5 Make:- As per DJB approved, AMP. meter selector switch 10 Amp. , volt meter selector switch 10 Amp., Power contactor 80 Amp TP, Power contactor 70/65 Amp. TP Make:- L &T/SCHNEIDER/C&S, Add on Block 2NO+2NC 2 A Make:- L &T/SCHNEIDER/C&S, Over load relay thermal type 45-75A Make:- L &T/SCHNEIDER/C&S, Star delta timer on delay 220 VAC Make:- DJB approved, Push button start / stop with elements 4 Amp. Make:- DJB approved , Voltage Monitoring Relay 415 VAC etc. make DJB approved, TP MCB of 63 Amp. Capacity Make :- L &T/Havells, Power capacitor of 20 kvar. 415 volt 50Hz AC supply 440 VAC make DJB approved, Power Terminal 100amp 3pole, WIRE 1.5 SQ MM FOR CONTROL & POWER WIRING, 35 sq mm Cu. power cable approx.. 40 metre, for All item taken as per DJB Approved Make

Fabrication of MS Base Frame made from MS Channel size 150mm x 75mm & cross support and also fixing with MS vertical support U channel and 6 nos drilling for foundation bolt as per existing site required.

Breaking of floor with help of machines and manual labour , lifting and placing at safer place 20 watt DG set for maintain place for pump set installation.

S/o Nuts bolts and washers of required size.

S/o Neoprene packing.

Supply & Fixing of tyre coupling duly bore suitable for centrifugal pump set. Make: Unique/ Fenner

S/o coupling guard suitable for centrifugal pump set.

Supply & fixing of pressure gauge for delivery side of the pump along with copper/ G.I. tubing soldering etc as required. Make: Febig / HGuru.

Making of RCC foundation of the centrifugal pump set by cutting the floor level of the pump house up to suitable depth and refilling it with the help of RCC mixture up to suitable height of the suction line including the cost of plastering of newly made foundation and SS foundation bolts of 300 mm length X 25 mm diaetc as required Size of foundation, TMT Bar of 12 mm ( 150 Kg/Cum)

Earthing of electrical equipments by using suitable size of G.I. strip with the existing earth electrode. Size 25X5 mm

Installation and fixing of the pump and motor on the base frame including couple the pump and motor jointing the pump with suction/ delivery line with proper alignment. the job also include fixing of Valves, laying of cable and making thimbling of cable on both ends by 50sq. mm 6 Nos thimbles, making connection the motor from starter/panel etc i/c watch and ward, cartage , loading and unloading taking all safety precaution arrangement, all tools and tackles the work including testing and commissioning all E&M equipment i/c pump and motor at no load and full load in the presence of Engineer In Charge .

Testing on load for any leakages in suction line in presence of engineer-in-charge.