Delhi Jal Board Tender

Supply of LT panel sheet steel enclosure made out of 2mm CRCA Sheet totally enclosed, powder coated free standing, floor/ground Mounted type, dust & vermin proof, out ward opening, lockable doors having hidden hinges and a bolted back cover both using non-deteriorating, neoprene rubber gascut. to provide IP-54 protection. The Each part of the fabricated panel will be strictly subjected to seven tank treatment and will include the following procedures and treatment (A)-Degreasing (B)-Derusting (C)-Rinsing (D)-Phosphating (E)-Drying (F)-Primer Spraying (G)-Oven drying baking. The various components, assemblies and sub equipments of the panel will be as per standard given in relevant IS. The busbar of the panel will be shaped out of high conductivity electrolytic conductor shall be liberal sized in aluminium. The control wiring of the panel will be done with PVC flexible copper wires of 1.5Sqmm each wire will be terminating with a ferrule crimped to the wire. Size-1200mmX1000mmX375mm suitable having MCCB four pole high breaking capacity-50KA, 415 V AC. theremomagnetic release 630Amp-1No with spreader & handle, extended cable jointing link of alumimium with PVC sleeve, Amp. Meter digital-1no., Volt meter digital-1no., selector switchs, indicating lights -3Nos. including all required protection & relay etc. Make of MCCB/MCB/other electrical accessories :L&T/Siemens/C&S/ DJB Approved

Supply of LT Distribution panel sheet steel enclosure made out of 2.5mm CRCA sheet totally enclosed, powder coated free standing, floor mounted type, dust& vermin proof, outward opening, lockable doors having hidden hinges and a bolted back cover both using non-deteriorating neoprene rubber gaskets to provide IP-54 protection .The each part of the fabricated panel will be strictly subjected to seven tank treatment. The various components, assemblies and sub equipment’s of the panel will be as per standard given in relevant IS. The bus bar of the panel will be shaped out of high conductivity, electrolytic conductor and shall be liberal sized in aluminium. The control wiring of the panel will be done with PVC flexible copper wires of 1.5 Sq. mm. Each wire will be terminating with a ferule crimped to the wire, size 2000MM x1600x375mm. Having following components MCCB 415V, FP 3phase High breaking capacity 50KA 50Hz,630Amp with spreader & Handle , extended cable jointing link of aluminium with PVC sleeve, indicating lights, Amp/Volt meter and MCB 100Amp. 4 pole 15KA - 10Nos with spreader & handle, amp. Meter, volt meter & indicating lights for each MCCB out-going feeder with protections release including all required protection & relay etc. Make of MCCB/MCB/other electrical accessories :L&T/Siemens/C&S/DJB Approved Make

Supply of LT Distribution panel sheet steel enclosure made out of 2mm CRCA sheet totally enclosed, powder coated free standing, floor mounted type, dust& vermin proof, outward opening, lockable doors having hidden hinges and a bolted back cover both using non-deteriorating neoprene rubber gaskets to provide IP-54 protection .The each part of the fabricated panel will be strictly subjected to seven tank treatment. The various components, assemblies and sub equipment’s of the panel will be as per standard given in relevant IS. The bus bar of the panel will be shaped out of high conductivity, electrolytic conductor and shall be liberal sized in aluminium. The control wiring of the panel will be done with PVC flexible copper wires of 1.5 Sq. mm. Each wire will be terminating with a ferule crimped to the wire, size 1200MM x1000x375mm. Having following components MCCB 415V, FP 3phase High breaking capacity 50KA 50Hz, 400Amp with spreader & Handle , extended cable jointing link of aluminium with PVC sleeve, indicating lights, Amp/Volt meter amp. Meter, volt meter & indicating lights for each MCCB out-going feeder with protections release including all required protection & relay etc. Make of MCCB/MCB/other electrical accessories :L&T/Siemens/C&S/DJB Approved