Delhi Jal Board Tender

MS clamp suitable for holding 3'' dia GI pipe made from 600x100x12 mm thick MS plate with complete set

F/S of MS bore cover suitable for 200mm dia MS Pipe. The bore well be fabricated with MS flat size 80mm width 5mm thickness and MS sheet 18SWG in 2 half pieces i/c suitable clamping arrangement having internal hole as per requirement

GI double flanged 90 degree 80 mm dia size bend

S/O nut bolts of size ½"x2" long M.S Make:- A-one/ISI mark

Supply of 80 mm dia. CI double flanged PN 1.0 NRV without bypass. Make :- IVC/Kirloskar

Supply of 80 mm dia. CI double flanged PN 1.0 Sluice valve with non rising spindle. Make :- IVC/Kirloskar

Orifice Assembly 80 mm dia. Complete

Electrically Operated Dosing pump complete with accessories and drum of 100 Ltr Chlorination capacity 4 LPH, back pressure 5.5 kg/cm2. Make :- Clomax/Milton Ray/ DJB Approved

Supply of Electrical feedet Pillar Hut Type made out of MS Sheet on angle iron of 40x40x5 mm thick, tentative size of panel 1500x750x350 mm made out of suitable size angle iron & MS Sheet with door and nterlocking arrangement duly painted having the following items : Internal wiring with suitable size of copper conductor wire as per IER , Main Switch 63A,415V - 01 No. (Make:-Havels/C&S/L&T/ DJB Approved), Fully Automatic Star Delta Oil Immerssed type Starter upto 15HP induction motor- 01No.(Make:- Bentax/L&T/Advance/DJB Approved) Ampere Meter 0-30 A, 96x96 mm-01No. (Make:- AE/EE) Volt Meter 0-500V, 96x96 mm - 01No. (Make:- AE/EE) Indicating Lamp Set RYB Set of 3Nos Shunt Capacitor of 5KVAR -01 No. (Make:-Epcos/Jyoti/L&T/DJB Approved). Selector Switch for Voltmeter- 01 No , Motor Protection assembly having dry run protection , Earth leakage single phase protection, High Voltage, Phase sequence character, Overload time relay protection, Power on programmable time switch i.e, RYB phase facility to change from auto to manual & Vice versa upto 15HP - 01No (Make :-Gain Guard/Pious/DJB Approved)

Rubber gaskets 80 mm dia.

Installation, Testing and commissioning of all the above equipments with the help of manpower and chain pulley taking all safety measures as per site requirements.

Earthing with G.I. earth pipe 4.5 meter long 40 mm dia including accessories and providing masonry elclosure with cover plate having locking arrangements and watering pipe etc. with charcoal/coke and salt as required. (One Panel should have Two separate earthing)

Supplying and laying 25 mm x 5 mm GI strip at 0.5 mtr below ground as strip earth electrode, including connection/terminating with nut, bolt, spring washer etc. as required (jointing shall be done by overlapping and with 02 sets of brass nut bolt & spring washer spaced at 50 mm)

Providing & fixing of 04 pole ELCB 63 Amp on each Panel. Make :- L&T/Havells/DJB Approved.

Grouting of existing LT Panel with 1:2:4 C:C material. Work includes grouting of both legs with C:C material to provide proper strenght