Delhi Development Authority Tender
... More
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Delhi Development Authority - DDA Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date13 Feb 2025
Closing Date19 Feb 2025
Tender Amount₹ 2,03,25,999
Technical
Technical
Bid Capacity
... View More
The bid capacity required in the given tender can be expressed as:
- Three similar works with a value of at least 40% of the estimated cost (Rs. 81,30,399.96), adjusted for 7% annual escalation.
- Two similar works with a value of at least 60% of the estimated cost (Rs. 1,21,95,999.4), adjusted for 7% annual escalation.
- One similar work with a value of at least 80% of the estimated cost (Rs. 1,62,60,799.2), adjusted for 7% annual escalation. The formulas to determine the bid capacity are:
- 0.4 * Estimated Cost (for one similar work in the three similar works criteria)
- 0.6 * Estimated Cost (for one similar work in the two similar works criteria)
- 0.8 * Estimated Cost (for one similar work in the one similar work criteria) And the value of executed works should be adjusted for the current costing level using the simple rate of 7% per annum. However, the exact bid capacity required cannot be calculated without the specific dates for adjustment. But since the question asks for bid capacity required in given tender to bid having value and formulas, the answer is:
- Three similar works: 3 * 0.4 * 2,03,25,999 = Rs. 2,43,71,997.20
- Two similar works: 2 * 0.6 * 2,03,25,999 = Rs. 2,43,71,997.20
- One similar work: 1 * 0.8 * 2,03,25,999 = Rs. 1,62,60,799.20 Formulas:
- 3 * 0.4 * Estimated Cost (for three similar works)
- 2 * 0.6 * Estimated Cost (for two similar works)
- 1 * 0.8 * Estimated Cost (for one similar work) And the value of executed works should be adjusted for the current costing level using the simple rate of 7% per annum. Therefore, the answer is the bid capacity required in the given tender to bid having value and formulas.
Technical Capacity
... View More
The required prior work experience for the bidder includes having satisfactorily completed similar works of a certain magnitude. Specifically, the bidder should have completed: - Three similar works each of value not less than 40% of the estimated cost, - Two similar works each of value not less than 60% of the estimated cost, - One work of similar nature of value not less than 80% of the estimated cost in the last 7 years. The estimated cost is Rs. 2,03,25,999. To calculate the value of the similar works, we can use the estimated cost. - 40% of the estimated cost is 0.4 * 2,03,25,999 = Rs. 81,30,399.96
- 60% of the estimated cost is 0.6 * 2,03,25,999 = Rs. 1,21,95,999.4
- 80% of the estimated cost is 0.8 * 2,03,25,999 = Rs. 1,62,60,799.2 The value of executed works shall be brought to the current costing level by enhancing the actual value of work at a simple rate of 7% per annum. Additionally, the minimum experience required for technical staff is as follows:
- For a Project Manager: 10 years
- For a Graduate Engineer: 5 years
- For a Diploma Holder: 5 years Note that these experience requirements are for work costing between ₹1000 to ₹2000 lakhs.
Costs
EMD
₹ 4,06,520Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
M/o Completed Scheme Under Nazul A/c-ii (hz).
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DDA_849037_1Bid Award Id
ViewTender No
85/EE/HCD-3/DDA/2024-25Tender Authority
Delhi Development Authority ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km, also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc., complete.
305
700
213653
... More
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: (a) In cement mortar
200
2458
491790
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : (a) Cement mortar 1:6 (1 cement: 6 coarse sand).
222
7311
1623098
... More
Random rubble masonry with old hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand). (Material to be provided free of cost by the department)
(Analysis based on DSR Item No. 7.1.1)
100
4291
429160
... More
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like.
(a) Cement mortar 1:6 (1 cement : 6 coarse sand).
50
9275
463773
... More
Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) :
(a) Raised and cut pointing
2500
701
1752625
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..
(a) In cement mortar
50
2060
103010
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
(a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
50
2434
121713
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
19
3551
67474
... More
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
(a) G.S. Sheet
400
164
65980
... More
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
(a) Asbestos cement sheet
190
77
14687
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
(a) Cement mortar 1:6 (1 cement : 6 coarse sand)
100
7132
713225
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
(a) Cement mortar 1:6 (1 cement : 6 coarse sand)
50
9105
455298
... More
Brick work with (using old bricks available on site) common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) (Material to be provided free of cost by the department)
30
2377
71336
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
(a) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
50
6518
325930
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
(a) 1:2:4 (1 Cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources).
40
7780
311212
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
(a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
10
9045
90458
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
(a) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
6
10852
65118
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
(a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
2181
107
235221
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
(a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
632
107
68161
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
(a) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc
123
842
103628
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
500
54
27325
... More
15 mm cement plaster on rough side of single or half brick wall of mix :
(a) 1:6 (1 cement: 6 coarse sand)
2000
395
790700
... More
12 mm cement plaster of mix :
(a) 1:6 (1 cement: 6 coarse sand)
2000
343
687300
... More
Neat cement punning
400
79
31980
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade.
(a) Old work (one or more coats)
100
62
6270
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete :
(a) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
250
185
46413
... More
Finishing walls with water proofing cement paint of required shade :
(a) New work (Two or more coats applied @ 3.84 kg/10 sqm).
2000
116
233800
... More
Finishing walls with water proofing cement paint of required shade :
(a) Old work (one or more coats @ 2.20 kg/10 sqm) complete.
4000
75
303200
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
(a) One or more coats on old work.
8000
102
822400
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
(a) Two or more coats on new work.
1000
155
155900
... More
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead
506
266
134824
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
(a) 25 mm thick.
200
1948
389650
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
100
2354
235470
... More
40 mm thick fine dressed stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.
(a) Red sand stone
100
1526
152605
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.
150
1096
164483
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
30
1267
38039
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
(a) Size of Tile 600x600 mm
15
1553
23302
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :
Red sandstone - exposed face fine dressed with rough backing.
(a) 30 mm thick
100
5295
529590
... More
Stone work (machine cut edges Veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately).
Kota stone slabs exposed face dressed and rubbed.
(a) 25 mm thick
50
2651
132568
... More
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge
5000
3
19250
... More
Extra for marking of structural steel work required to be re-erected.
5000
4
23250
... More
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
2000
117
234700
... More
Welding by gas or electric plant including transportation of plant at site etc. complete.
10000
3
37000
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
(a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
2000
172
345200
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
(a) Hot finished welded type tubes.
2000
194
388800
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
(a) Made of G.I. wire of dia 4 mm
500
1017
508900
... More
Providing and fixing hard drawn steel wire fabric 75x25 mm mesh and priming coat with approved steel primer all complete as per the direction of Engineer in Charge. (Based on DSR-23 item no 26.40)
1000
120
120300
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester topcoat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
200
738
147730
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
400
375
150320
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge: External work 50 mm nominal outer dia. Pipes.
300
794
238275
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge: External work 40 mm nominal outer dia. Pipes.
300
563
168915
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge: External work 20 mm nominal outer dia. Pipes.
100
274
27430
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.: External work 40 mm dia. nominal bore
200
617
123410
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.: External work 50 mm dia. nominal bore
200
762
152430
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.: External work 65 mm dia. nominal bore
50
896
44830
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore
50
826
41305
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore
10
1026
10267
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 65 mm nominal bore
2
1742
3484
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: 25 mm nominal bore
70
464
32484
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality: 25 mm diameter pipe
100
18
1835
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality: 40 mm diameter pipe
200
25
5050
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality: 50 mm diameter pipe
200
30
6100
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality: 65 mm diameter pipe
50
37
1893
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 40 mm nominal bore
10
631
6313
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 50 mm nominal bore
10
823
8238
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 65 mm nominal bore
3
1136
3410
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
200
772
154480
... More
Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat.
The rate includes the cost of rounding off the corners, lowering down the structural framework from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in charge. (Structural framework including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).
(a)Overhead informatory road signage
50
5879
293995
... More
Renewing glass panes, with putty and nails wherever necessary including
racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).
50
1090
54533
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
(a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
10
2172
21721
... More
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
2000
39
78700
... More
Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer -in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost).
1070
109
117112
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
50
10117
505880
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
400
131
52700
... More
Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in-charge. (Old CC paver blocks shall be supplied by the department free of cost).
186
402
74949
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
200
972
194400
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge.
(a) 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern.
100
1091
109150
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
(a)Ordinary cement without any pigment.
100
1056
105635
... More
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
50
2017
100880
... More
Cutting bajri paths and making good the same including supply of extra quantities of brick aggregate, moorum and red bajri required.
3000
284
852600
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :
(a)Foundations, footings, bases for columns.
192
392
75293
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
(a)Using flats 30x6mm for diagonal braces and central cross piece
20
5563
111275
... More
Providing Hydraulic excavator (3D) with driver and fuel all complete as per direction of Engineer in charge
201
1395
280586
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :
(a)W.C. pan with ISI marked white solid plastic seat and lid
4
6515
26062
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
(a)Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern
4
9612
38450
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:
(a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
4
2648
10595
... More
Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms.
4
111
446
... More
Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.
4
713
2853
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.
4
670
2682
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) completes with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
4
1607
6432
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
4
4051
16207
... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design: With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5
50
5957
297895
... More
Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources), including necessary excavation of size 250x250x450mm deep for the same in bitumen/ concrete pavement at specified spacing.
10
929
9298
... More
Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.
50
108
5415
... More
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high-pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial de-silting of manholes and de-chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth.
200
340
68150
... More
Cleaning of underground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations: -
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits.
(ii) Entire surface area of the sump shall then scrub thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally, the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
300
84
25455
... More
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.
10
433
4338
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
412
263
108747
... More
Half brick masonry with common burnt clay F.P.S. (non-modular) bricksof class designation 7.5 in foundations and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand)
100
905
90505
... More
Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
50
1123
56190
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings, glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sands: 6 graded stone aggregate 20 mm nominal size)
50
131
6553
... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sands: 6 graded stone aggregate 20 mm nominal size).
17
141
2409
... More
6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand)
200
300
60090
... More
Lettering with black Japan paint of approved brand and manufacture
5323
6
32736
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
5
367
1836
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below
5
143
718
... More
Making bajri path including preparation of sub grade, supplying and laying brick aggregate of 50mm nominal size 7.5 cm deep with binding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller.
500
191
95625
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
50
634
31723
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)
50
1176
58840
... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
1500
-
750
... More
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): From brick work in cement mortar
5049
6700
33832
... More
Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured): In cement mortar
50
689
34460
... More
Providing, placing and fixing road side waste bin (TWIN) with MS frame capacity 100 lit, manufactured from reputed manufacturer Neelkamal, Sheetal etc . or equivalent. The agency shall procure and submt specifications of manufacturer to get it approved before execution from Engineer-in-charge
49
5000
245017
... More
"Providng, placing and fixing of precast concrete chair type bench with back rest. Manufactured from reputated manufacturere such as K.K, Bee-Kay, Nitco, Nimco, Arzoo, Creative, concrete or equivalent by using M-30 grade of concrete using Vibro compaction process and suitable reinforcement to prevent damages during handling transportation execution and long use. The bench consist of 2 Nos L Shape base support in grey cement colour (Thickness- 100 mm, Back height - 1000 mm, front height - 450 mm, Base width620 mm ) and 5 Nos reinforced concrete planks in red colour of size 1500 mm x 100 mm x 50 mm and 1 No. of reinforced concrete plank of size 1500 x 200mm x 50 mm. Reinforcement as per approved drawing. All planks are to be joined together with galvanized nuts and bolts of suitable size and sealed after assembling the bench complete. The length of the bench 1500 mm. Seat height 450 mm, total height 1000 mm front face of all planks shall be given special coating to make them water proof and glory etc. complete in all suspects and as per the direction of Engineer-in-charge (Chair type bench with back rest). The executive Engineer concerend will collect product specification from any 3 manufacturers and one of them shall be approved by the superintending engineer concerned before providing ad fixing of site."
50
8451
422565
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
4000
11
44000
... More
Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechanical / manual means, including preparing and cleaning the surface for re-pointing/ refilling of joints, including disposal of rubbish to the dumping ground within 50 metre lead.
1000
72
72450
... More
Supplying at site : (a) R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6 mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately).
1
32891
32891
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (a) 610x510 mm bowl depth 200 mm.
2
4940
9882
... More
Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.
10
536
5364
... More
Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter forchimney stacks, skylights etc.
2
92
186
... More
Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter.
2
256
513
... More
Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
2
195
391
... More
Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self-drilling fastener and EPDM washer etc. complete. Corrugated serrated adjustable ridges
2
522
1046
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work
100
235
23515
... More
Applying correction factor on DSR-2023 items on account of GST @ 0.973 (excluding item no. 117 & 118)
1
-1213088
-1213088
... More
Applying correction factor (including item no. 117 & 118)
1
667582
667582
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements